Accessibility options not working in Captivate 7

I need help. I can't get my project to in captivate 7 to be accessible. I've tried testing on JAWs and for some odd reason it seems like the enable accessbility is not working cause everything is messed up when I test on JAWs. Is their anybody that would be willing to help me look at my file?

What, exactly, do you mean by "messed up"? There are certain things that do and do not work in JAWS, and you need to build to the limitations of the screen reader see this link for a list: Jaws and Cp 7.01.237 - not BFFs? Beyond that, there are workarounds, depending on what exactly is messed up. If you can detail the issues, maybe I can help you get on the right path.
Justenuf

Similar Messages

  • Alternate Access Mapping not working for Zone : Intranet

    One of our client want to set Alternate Access Mappint (intranet) with url "intranet.theirDomain.com" with local IP address.
    is it possible?
    subsequest to my previous question (
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/3f39711e-301a-40e8-aa7a-855fa2c268b1/alternate-access-mapping-not-working?forum=sharepointadmin )
    I want to ask one more question
    Can we configure "intranet.theirDomain.com" with local IP address for any other zone?
    or
    If there is ".com" within the url then it can't be configured for InTRAnet?
    Thanks
    S H A J A N

    The names for the zones don't matter. You could use the 'extranet' zone for another intranet name if you wanted, the names are just to make it a bit more friendly for beginners.
    What you describe sounds routine, you create a web application with a name, then use an AAM to allow users to access it with a more friendly name. Frequently you end up creating
    http://intranet.domain.com and
    http://intranet as an AAM, or vice versa.
    You can use .com for an intranet site, you would need to add the site as an A Host record in your DNS server so that traffic is sent to your internal server rather than out into the wider world.

  • Self-Paced Learning - Bookmark not working in Captivate 5

    I followed the directions of adding a Table of Contents to one of my captivate projects and selecting Self-Paced Learning in order to create a bookmark but this does not work.  I have saved it as Adobe Flash 9 and Adobe Flash 10 but I am not getting the message about starting where I left off when either refreshing the browser or exiting and going back in.  What am I missing?
    Thanks for your time,
    Brenda

    All slides in the presentation are marked as continue.  I have gone
    through the first 5 slides and when I refresh the browser or exit out of
    Internet Explorer and open the project again it just starts at the
    beginning.
    Brenda
    From:   Lilybiri <[email protected]>
    To:     Brenda Dersham <[email protected]>
    Date:   01/25/2011 08:33 AM
    Subject:        Self-Paced Learning - Bookmark not
    working in Captivate 5
    Hello Brenda,
    How did you check: after uploading to a LMS?
    You have to be aware of the fact that a slide will be marked as 'viewed'
    only when the playbar has played the whole slide till the end. If you do
    pause slides with a click box, button, TEB and attach the action 'Go to
    Next slide' or something similar instead of the default action 'Continue'
    this will not happen and the slide will not be marked as completed.
    Lilybiri

  • Wifi option not working in my i phone 4s ios 7.0.2, how to fix it

    wifi option not working in my i phone 4s ios 7.0.2, how to fix it

    Now my wifi is working but not showing the wifi logo on the top

  • Keychain access application not working.

    keychain not working, click on the generic app. icon and it simply pops up and closes. reloaded osx10.4.3, but no results. anyone have suggestions?
    powerbook g4   Mac OS X (10.4.3)  

    Next step is to create a new admin user account, log into it, and see if the problem remains. If not, then it's a problem with the original account. If so, then the problem's system-wide.
    If the original account, you have two options: 1) try to find the corrupted file, maybe the com.apple.keychainaccess.plist file in ~/Library/Preferences/. Move it to the desktop, log out and back in, relaunch Keychain Access. If that doesn't work, then check all the .plist files with something like Preferential Treatment. 2) reset your prefs in the new account and eventually delete the original.
    If system-wide, then reinstalling the OS using the Archive & Install option, saving user and network settings, might be your only option, especially since reinstalling the combo update didn't fix the problem.

  • Swf with external .as files not working in Captivate

    Hello,
    I am using Flash Professional CS5.5 & Captivate 5.5 (purchased with eLearning suite).
    When I insert swf animations into Captivate that have external .as files they do not work.
    Tried both insert animation & insert animation slide - same results.
    I placed the .as files in the same file as my Captivate project and have tried multiple setting options.
    The FPS are set to 30.
    I had the same problem with external audio files and had to embed the audio into my fla to get it to play in Captivate.
    Does Captivate just not allow external files?
    Any help/insight is appreciated!!
    Les-

    The most likely reason for this failure is that since your SWF is now embedded into another SWF (the Captivate project) the paths to the AS files need to be altered in Flash to allow for this.
    You need to investigate how this would be done in AS code if your Flash SWF was a symbol inside another Flash SWF.

  • Right-click feature not working in Captivate 4.0

    Hello:
    I am new to Captivate 4.0 and have a huge problem.  I create software simulation training modules and publish them as .swf files. I then save them to a shared network folder where our web team links to them on our company Intranet site.  The right-click feature is not working in any of the modules. I have changed my Preferences to remove the Enable Accessibility checkmark and publish to Flash Version 9.  I understand that this is probably a Flash security setting problem.  How do I make this work so that all 15,000 users at our company can view these modules and have the right-click feature work?  Any help is greatly appreciated as I am getting very frustrated as I upgraded to 4.0 specifically for the right-click feature! I know very little about Flash and hope there is someone who can help me in simple "layman's" terms.

    Hi there
    Are you opening the Captivate by pointing only at the SWF? I ask because I believe the associated HTML file Captivate creates is involved. So if you are only opening via the SWF it would stand to reason the Right-click would fail.
    If it's the Flash Security settings, you would be well advised to consider migrating the content from a network server to a Web Server. (company Intranet)
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • 'Get All New Data Request by Request' option not working Between DSO n Cube

    Hi BI's..
             Could anyone please tell me why the option ' Get one Request only' and  'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
    Scenario:
    I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to  'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
    Regards,
    Sari.

    Hi,
    How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
    Delta Init. Extraction from...
    - Active Table (with archive)
    - Active Table (without archive)
    - Archive ( full extraction only)
    - Change Log
    Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
    Hope that helps.
    Regards
    Mr Kapadia
    *Assigning points is the way to say thanks*

  • VTML-Tags for text-to-speech do not work in Captivate 6 - are they working in Cap. 7 again?

    I had a hart time to find out, that the functionality was "forgotten" to be programmed in the version 6.
    Together with Neospeech I worked long to make single voices work in full functionality and it cost additional licence fee... unfortunately the voices sound tinny so I cannot really use them...and due to different time zones it is hard to find the error together with Neospeech
    Now I see that Captivate 7 is available.
    Is there already qualified info if the vtml tags work again like they did in older versions?
    Adobe Support hotline was NO HELP at all, very unfriendly... only idea was, that I should get the test version and find out myself, pretty impertinent.

    Hi
    You might already know this, but stating it here to rule out the simple failure cases.
    I have had a similar problem in the past using VTML tags inside Captivate. I used to type the slidenotes in my favorite editor and then copy paste the text from there to the slidenotes panel of Captivate. Turns out that my editor was using Unicode and hence the entire text pasted into Captivate slidenotes became unicode text, including the VTML markers. Though the pasted text "looked" fine the markers were messed up (for example, the double quotes around the value attributes looked like double quotes but they were actually multibyte unicode sequences) and this confused Neospeech. The output audio would be funny (for example it would read "Less Than...V...T...M...L...") or NeoSpeech will crash taking down Captivate along with it.
    The fix was quite simple. I started typing the slide notes from within Captivate slide notes panel and everything worked fine after that. Alternately I could type in my favorite editor (after making sure that it is operating in Plain text mode) and then copy paste work flow also worked fine.
    Another common mistake (at least, I do that often) is to select the speech agent from the drop down at the top of the dialog and forgetting to choose the speech agents for individual slide notes, which may still be referring to a non-neo-speech agent which does not understand the VTML tags.
    No other software tool was required like the German Adobe Support team may have mentioned. I am using Captivate 7.
    Cheers
    Siva

  • InfoPath 2013 - Rich Text box - Expand to show all text option not working

    I have create an InfoPath form and created a view which will be used for printing. I have a rich text box in this print view and the scroll option for this rich text box is set to "Expand to show all text". However, it is not working and it doesn't
    expand the size of the text box based on the content length.
    same thing used to work in InfoPath 2010.
    Any suggestions?
    Thanks,
    Neelesh

    Hi Wendy,
    Here are the steps I have used:
    1. On default view added a rich text box.
    2. Created another view called Print and mapped it to the same Field which I added to default view
    3. Set the Wrap text and Expand to show all text on both the Rich Text Box Properties - in default view and in Print
    view. Also set the height of the rich text box to auto.
    4. Set the print views as the print view for default view
    5. Deployed the form to SharePoint Form Library
    6. Opened the form in browser
    7. Entered the content in the rich text box in default view. It expands well if I have much content
    8. Clicked on Print preview and that opens up the print preview and it shows the rich text box only one line in height and with scroll bar
    I missed to mention that it is a web browser enabled form and I am using InfoPath 2013 and SP 2013.
    It does work fine in InfoPath client.
    Thanks.

  • Hierarchy Node Variable search (find) option not working

    Hi Experts - I have created a hierarchy node varibale on a fixed hierarchy. When user run the report and click on hierarchy node variable selection option , A new window will pop up which has all the nodes.
    As the list is quite big and has many levels , On the same pop up , we have find option , when we enter any node in the find box , its always give a ABAP Dump , It never works for me...
    Is node find/search in not working in Bi 7.0 .
    Thanks
    R

    Hi Rohan,
    We can restrict the hierchey level at property of of the hiearchey enabled characteristic.
    Hope this hels...let me know if u require any further info on this..
    Best Regards,
    Maruthi

  • "Document type" in access sequence  not working in free goods

    Dear All,
    our requirement is to provide free goods with the main items in portal.
    for this i defined access sequence 1.Customer/Material and 2. SalesOrg/Documnet Type/Material.
    for access sequence Customer/Material  it's working fine but when i use SalesOrg/Documnet Type/Material it's not working.
    problem is that when i use Document type in access sequence it's not working.
    pls help.
    Radhashyam Sahoo

    Hi Apoorva!
    What do you mean with "Access Sequence"?
    In CRM 7.0 EHP1 there is a generic framework-feature available which allows the defininition of the tab-order.
    Best regards
    Arno

  • Remote access vpn not working, VPNC client

                       Hi,
    I have configured a remote access vpn client on cisco ASA 5520 with the following configuration. we are using cisco vpn client.
    tunnel-group consultant type remote-access
    tunnel-group consultant general-attributes
    address-pool VPN
    authentication-server-group RSA-AAA LOCAL
    default-group-policy consultant
    tunnel-group consultant ipsec-attributes
    pre-shared-key *
    group-policy consultant internal
    group-policy consultant attributes
    vpn-idle-timeout 120
    vpn-session-timeout 720
    vpn-tunnel-protocol IPSec
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value access-spilt
    access-list access-spilt standard permit host 10.101.50.60
    One of the linux users is using vpnc and once the user connects to the vpn and the user adds a static route on the machine with the destination pointing to the vpn interface, for example 10.101.50.0/24, user is able to reach all the hosts in the subnet even though the access list on the firewall is configured for one host 10.101.50.60.
    I did the same test on a windows machine, but was only able to reach the specific host allowed through vpn.  why is the network filter not working for vpnc. please advise.
    Thanks

    Hi have solved the issue . enabling the demo 3DES & AES now my VPN is connecting
    https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
    thx to friend "Jennifer Halim"

  • Search options not working in SQL

    Hi,
    I have the Following SQL statement that filters for a Search
    Criteria and it works fine in MySQL 4
    SELECT *,MATCH (presentationID,presentationTitle,
    PresentationName,ProductlineName,
    LevelName,RoleName,presentationDescrip) AGAINST (SearchString IN
    BOOLEAN MODE)
    FROM tbpresentations
    WHERE MATCH (presentationID,presentationTitle,
    PresentationName,ProductlineName,LevelName,RoleName,presentationDescrip)
    AGAINST (SearchString IN BOOLEAN MODE)
    ORDER BY productfamilyName DESC
    The SearchString Variable has the following parameters:
    Name = SearchString
    Type = Text
    Default Value = -1
    Run-time Value = $SearchStringSQL
    updating to SQL 5 returns the error:
    MM_ERROR: MySQL Error#: 1054 Unknown column 'SearchString' in
    'field list'
    Any ideas?
    cheers

    That did not work. I deleted the MM Files and the error still
    returned.
    Again, Functionality is unaffected which is completely
    unusual for a coding environment.
    I have no access to the recordset bindings, so I handcoded
    the references instead, and it works fine.
    I took the issue to our worldwide Web Developement
    Department, as they are responsible for the Organisations Corporate
    and ECommerce Sites and they had a look. (I look after the Training
    Intranet)
    They use Visual Studio for the sites and I gave them all the
    code.
    They ran a debugger and found nothing wrong with the code,
    Which is why it runs fine.
    After a few hours of testing and retesting and checking all
    the lines of code (They get paid the big bucks) they concluded that
    the error is caused by a bug in Dreamweaver CS3 unable to parse or
    recognise changes to either MySQL Syntax or PHP 5.
    Dreamweaver has added the $SearchString variable as a Table
    Column in the Bindings for some daft reason based on the SQL
    Statement, which is causing the error. It also added another Column
    called 'Real', I have no idea where that was coming from. It also
    added a third Table field tothe Recordset bindings called MATCH.
    My Local testing Servers (3 of) all use WAMPserver 2 and
    generate the same eror.
    The live Intranet Server, which is a new Win2003 Dell Server,
    uses IIS6 and also generates the same error when I "test" it
    through CS3.
    So, I dusted off a copy of Dreamweaver 8 installed it, and
    guess what....no errors.
    They said the immortal words that programmers never say: "
    Ignore the error, it wont affect functionality".
    Just thought I'd let you know.
    cheers for the help.

  • Alternative Access Mapping not working "You're not connected to a network"

    Hi *,
    i want to set up alternate access mapping in my sharepoint 2013 development environment.
    My SharePoint is reachable through http://sp2013.
    I created a second web application with listens on port 8080. When i open http://sp2013:8080 everything works fine and i can see my root site collection.
    Next i added through "Add internal Urls" a new url -> http://sp2013test to the default zone.
    Next i edited the bindings in the iss application for this web application and added http://sp2013test listening to port 80:
    But i does not work! I get the message "You’re not connected to a network" from the ie.
    I dont want have to call my WebApps through ports. I want to have WebApplication which i can call through clear names like http://customerWebApp1, http://customer2WebApp. All via Port 80.
    Whats wrong here?
    Best Regards
    Bog
    Developers Field Notes | www.bog1.de

    Hi Bob,
    For you issue, try to map web application URLs to the local loopback address. For that you need to update host file at the path:(C:\Windows\System32\drivers\etc\hosts) 
    Here is a link about Setup Multiple SharePoint Web Applications on Port 80 with Https Binding on Port 443, you can use as a reference:
    http://onlinecoder.blogspot.com/2012/10/setup-multiple-sharepoint-web.html
    Best Regards
    Lisa Chen

Maybe you are looking for