Accessing 10g DB with 9i OEM

Some time i can access sometime does't why? what the permanent fix to access 10g db with 9i OEM?

Nope. Check Metalink, I'll bet you will find that using 9i OEM for managing 10g databases is not recommended nor certified. (In general, software is seldom "future proof", right?)
For 10.x databases you should use the newer Grid/Database Control management software or the old-style EM Console (standalone), found on the Client install.
Of course, if you have a huge setup with 9i EM/OMS and need time to work out migration plans, maybe you need to use a trick or two to come across, but I suspect that's a different matter.

Similar Messages

Accessing and Managing RAC 10g database with 9i OEM

can i Access and Manage RAC 10g database with 9i OEM? If yes How?

9i EM can 'see' a 10g database and perform some basic functions (rsp. all what is known to 9i). But it cannot manage any 10g functionality , because it doesn't know it. So such a constellation doesn't make really sense. On the other hand 10g EM can manage 8i,9i and 10g databases.
Werner

Does managing Oracle 10g RAC with ASM require full root access?

We currently have three entirely separate support areas, Unix, Storage and DBA. We're now considering using Oracle 10g RAC with ASM and as part of the assessment trying to work out if we can still draw similar support boundaries. I know that installing RAC and configuring ASM requires root access but will DBA continue to need root access to manage & support RAC? If so, does anyone know if the commands they need can be RBAC'd or if we just need to share root access going forwards. I've had a look at a number of docs including http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/toc.htm. which is fairly informative but none of them seem to mention the requirement for root access on Solaris. I'm guessing they just assume that it's available, but that's not generally the case in our environment.
All advice / info welcome!

I would have thought that the only reason you would need root access once RAC and ASM had been set up would be to add more disks to the ASM configuration. This would be needed to change the ownership on the raw LUNs or to make additions to metasets (SVM/Oban) or diskgroups (VxVM/CVM). Beyond that, I can't imagine needing root access.
I'm sure others will chime in if they can think of other reasons!
Regards,
Tim
Edited by: Tim.Read on Jun 3, 2008 2:25 AM

Unable to access the objects with out schema as prefix.. can any body help

Hi,
i am using 10g.I have one problem like i unable to get the table access with out mention prefix for that table.
but i created public synonym and gave all grants to all users also. but still i need to mention schema name as prefix otherwise it give the error..
can any body tell me reason and give me solution.
ex: owner:eiis table:eiis_wipstock
connect to: egps schema
in this position if i try with eiis.wipstock it gives error but if i mention like eiis.wiis_wipstock then its working fine.

Pl do not spam the forums with duplicate posts - Unable to access the objects with out schema as prefix.. can any body help

Using ASSM in 10g RAC with SAP

Hi,
It is recommended to use ASSM (Automatic Segment Space Management) with using 10g RAC with SAP. Our deployment is currently a single instance database that is not using ASSM. We plan to convert this single instance database to a 10g RAC database. I wanted to know what the supported method is to convert to ASSM, during this process.
Will it require an export and import of the database?
Thanks

Hi Badar,
of course you can move tables (w/o longs) via ALTER TABLE MOVE... but why do you may want to do that?
ALTER TABLE MOVE is an OFFLINE action - nobody can access the table during the move.
DBMS_REDEFINITION (used by the BRTOOLS) is ONLINE. Normal work can proceed while the data is copied.
With ALTER TABLE MOVE you've to touch every single table (ca 50.000-80.000 in a SAP installation) by hand. PLUS you've to rebuild each index on each table by hand.
The BRTOOLS do all that for you. In parallel if you want to.
Moreover the BRTOOLS provide extensive logging in case any error should occur. ALTER TABLE MOVE does not.
So better forget about ALTER TABLE MOVE... use the BRTOOLS - they are not that bad
best regards,
Lars

10g client with Toad - why bother?

Hi.
I am doing several installations of 10g client yet to get access to the db the machines will use Toad. What does the "light" client contain? Must every machine actually have the client installed? To access the db with Toad / SQL*Plus - what does the client contain that makes it necessary to install beforehand?
DA

Some application use JDBC connection instead of native Oracle SQLNet connection. In that case, Oracle client installation is not required.
Some tools support both types of connection for example SQL Developer,
http://www.oracle.com/technology/products/database/sql_developer/index.html
Oracle Instant Client Light (English) support different kinds of connectString, for example,
As an SQL Connect URL string, of the form: //host:[port][service name]
As an Oracle Net keyword-value pair. For example:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp) (HOST=myserver111) (PORT=5521))
(CONNECT_DATA=(SERVICE_NAME=bjava21)))
As an entry in the tnsnames.ora file.
So you don't have to configure tnsnames using netca in this case.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14294/install.htm#sthref126

How do I share access to Dreamweaver with a colleague of mine in a separate location?

How do I share access to Dreamweaver with a colleague of mine in a separate location?
I currently have DW loaded onto my desktop. I am presuming that if my colleague wants to get access to it, I have to copy the DW files I've created and put them onto the creative cloud connection. If that is the answer, How do I do that?
My colleague has already downloaded DW onto his computer - he just can't see the files that I've created, even though I am making sure that my version of DW is always closed when he accesses his version.
Any help gratefully received
Jamie

It is against the standard Dreamweaver license for your colleague to be using your license. Your colleague needs his license.

Error while accessing BSAD Table with dunning date

Hi ,
I developed a report for FI module accessing BSAD table with default customer ranges and for specific dunning dates - It ran for a very long time and timed out - (I know this is due to huge volume of data) -
Is there any way to access BSAD table easily with Dunning dates (Other than creating Index on it) ???
Or any standard function module available ??
Regards
Rajesh.

Hi
Try the below tables for the dunning data details:
MHND            Dunning Data
MHNDO           Dunning data version before the next change
MHNK            Dunning data (account entries)
MHNKA           Version administration of dunning changes
MHNKO           Dunning data (acct entries) version before the next chang
SKS

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supp

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

I can't access the internet with Firefox on my computer (Windows 7 PC). I have used Firefox as my browser for 1 year but 5 days ago it stopped working even though Internet Explorer worked fine. I can't solve the problem and need some help.Randy Brown

September 26, 2011
Dear Mozilla,
I am having some difficulty accessing the internet with Firefox on one of my PC computers. I normally use Mozilla Firefox as my web browser and google is my homepage and gmail is my email system. The operating system is Windows 7. For over a year this system worked perfectly but a few days ago it stopped working. When I launch Firefox now I get the message that that website (www.google.com) is unavailable. In fact, I can’t access any website and I am blocked from the internet entirely within Firefox. My internet connection is fine because Internet Explorer works fine. I can access google and any other website within that web browser. I have investigated all the security issue I can manage and found no smoking gun. I’ve tried uninstalling and reinstalling Firefox to no avail. Is Windows 7 compromising the effectiveness of Firefox? Any suggestions or other assistance you can offer would be appreciated.
Sincerely,
Randy Brown
[email protected]

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

Multiple users accessing entity bean with same PK

Hi,
Some body please clarify the below issue.
(EJB 1.1, WAS3.5)
I have two app servers and two clones each clone is running in each app server.
Stateful session bean access Entity beans to update/read record in the database.
According to my requirement multiple users can access the same entity data (same primary key). Suppose user A created a Stateful session bean SB1 and the SB1 created Entity1 with PK1, this is happening at clone1.
User B accessed the site and the request went to Clone2 and a new SB2 created, but the SB2 need to access the database with Same PK1.
For the above situation, I guess container can not create a new Entity bean with PK1 because EB with PK1 is already there and it tries to allocate same EB1 with SB2, so if two requests are concurrent do the SB2 wait to get the handle of the EB1?
Is there any way to create two Entity beans with same Primary Key at the same time but in different clone?
Thanks,
Sagar

Hi,
The concurrency level has to be set at the level of database and the database will take care of consistency & integrity of the data. So specity the concurrency level on the database connection in each appserver.

I'm not able to access goolge docs with the blackberry browser (it worked fine till a few weeks ago)

I'm not able to access google docs with the blackberry browser (it worked fine till a few weeks ago)
seems that this issue happens to a lot of people
is google going head to head with Blackberry ? or is this just a bug ?
Message Edited by avolcoff on 08-27-2009 01:06 AM

Welcme to the cmmunity supprt frums
Nurse-Berry
Follow NurseBerry08 on Twitter

Accessing Collaboration Room with Room Link (URL) doesn't work

hi all
i'm trying to access a collaboration room by room link (url) but it doesn't work. the room url is: https://www.sportal.ch:443/irj/index.html?NavigationTarget=CollaborationConnector://portal_content/com.sap.ip.collaboration/Rooms/b0ce78ec-3f30-2910-2184-b171271d4d95/workset&NavTargetAsRoot=true
i have checked the roombackend-properties => they are ok
i have checked the roles and permissions => they are ok
what me surprises: when i open a new browser window and type in the mentioned url, our portal-start-page is displayed but in the content area there is no content displaied. i expected, that when i type in the url, then the authentification-dialogue would appear, but it does not.... (does this url only work if i am already logged in the portal??)
if you have any ideas, how the problem could be solved, please let me know!
thank you for your help.
greetings
flo

hi ingo
thank you for the input. i have now solved the problem, perhaps my solution fits for you too. here it is:
when i use the function "send room-link" the url looks like this:
https://www.sportal.ch:443/irj/index.html?NavigationTarget=CollaborationConnector://portal_content/com.sap.ip.collaboration/Rooms/9020275c-8348-2810-28a6-a8c1ae60e192/workset&NavTargetAsRoot=true
with this url i can not access the collaboration room.
but when i change the url like this:
https://www.sportal.ch/irj/portal?NavigationTarget=ROLES://portal_content/com.sap.ip.collaboration/Rooms/9020275c-8348-2810-28a6-a8c1ae60e192/workset&NavTargetAsRoot=true
now i can access the room (with authentification).
OK, for me the main problem is solved, but can someone perhaps tell me whats the difference between:
NavigationTarget=CollaborationConnector
and
NavigationTarget=ROLES
thank you for your help!
greetings
flo

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

Unable to access wireless connection with linksys rooter WRT54GS

Hi,
I just installed a wireless rooter Linksys WRT54GS on my connection, The problem I have is being able to access it with my wireless on my laptop.
I kept getting a message stating "connection unindentified" "access limited". I've done most of what is already suggested on your forum such has turning the power off of my rooter, my modem and such and still nothing. I'm able to access the wireless with my girlfriend Mac Notebook, my playstation 3 and my desktop computer which uses Windows X. First I thought that it my be a problem with my security but even when the connection is unprotected I still get that error. I try to disable the IpV6but that didn'tdo anything either.
My laptop is a Toshiba Qosmio X300 PQX32C-033019 with Vista and my rooter is a Linksys WRT54GS vers. 6
Here's my connection log, sorry if it's in French:
Informations sur l'ordinateur
Vendor:TOSHIBA
Machine Name:Qosmio X300
VersionQX32C-033019
CPU Maker:GenuineIntel
CPU Name:Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
CPU Clock:2267
CPU Base Clock:2267
OS:Microsoft® Windows Vista™ Édition Familiale Premium
OS Build:6001
OS SPervice Pack 1
Ram:4188120
Début de la page
Informations IP
ipconfig /all
Configuration IP de Windows
Nom de l'h“te . . . . . . . . . . : PC-de-ThomasMur
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Mixte
Routage IP activ‚ . . . . . . . . : Non
Proxy WINS activ‚ . . . . . . . . : Non
Liste de recherche du suffixe DNS.: phub.net.cable.rogers.com
Carte r‚seau sans fil Connexion r‚seau sans filÿ:
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Intel(R) Wireless WiFi Link 5100
Adresse physique . . . . . . . . . . . : 00-21-5D-3D-9C-08
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::a9d9:4618:2ae4:d7e5%11(pr‚f‚r‚)
Adresse d'autoconfiguration IPv4 . . . : 169.254.215.229(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.0.0
Passerelle par d‚faut. . . .ÿ. . . . . :
Serveurs DNS. . . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Ethernet Connexion au r‚seau local :
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Adresse physique . . . . . . . . . . . : 00-1E-EC-3F-7B-CF
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::4da:b21b:843c:7bfd%10(pr‚f‚r‚)
Adresse IPv4. . . . . . . . . . . : 192.168.1.100(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.255.0
Bail obtenu. . . . . . . . .ÿ. . . . . : 8 juin 2009 18:11:58
Bail expirant. . . . . . . . .ÿ. . . . : 9 juin 2009 18:11:58
Passerelle par d‚faut. . . .ÿ. . . . . : 192.168.1.1
Serveur DHCP . . . . . . . . . . . . . : 192.168.1.1
Serveurs DNS. . . . . . . . . . . . . : 64.71.255.198
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Tunnel Connexion au r‚seau local* :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : isatap.phub.net.cable.rogers.com
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Carte Tunnel Connexion au r‚seau local* 6 :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Carte Microsoft ISATAP #2
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Début de la page Informations de routage
route print
===========================================================================
Liste d'Interfaces
11 ...00 21 5d 3d 9c 08 ...... Intel(R) Wireless WiFi Link 5100
10 ...00 1e ec 3f 7b cf ...... Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
1 ........................... Software Loopback Interface 1
13 ...00 00 00 00 00 00 00 e0 isatap.phub.net.cable.rogers.com
12 ...00 00 00 00 00 00 00 e0 Carte Microsoft ISATAP #2
===========================================================================
IPv4 Table de routage
===========================================================================
Itin‚raires actifsÿ:
Destination r‚seau Masque r‚seau Adr. passerelle Adr. interface M‚trique
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.215.229 281
169.254.215.229 255.255.255.255 On-link 169.254.215.229 281
169.254.255.255 255.255.255.255 On-link 169.254.215.229 281
192.168.1.0 255.255.255.0 On-link 192.168.1.100 276
192.168.1.100 255.255.255.255 On-link 192.168.1.100 276
192.168.1.255 255.255.255.255 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 169.254.215.229 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.100 276
255.255.255.255 255.255.255.255 On-link 169.254.215.229 281
===========================================================================
Itin‚raires persistantsÿ:
Aucun
IPv6 Table de routage
===========================================================================
Itin‚raires actifsÿ:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
10 276 fe80::/64 On-link
11 281 fe80::/64 On-link
10 276 fe80::4da:b21b:843c:7bfd/128
On-link
11 281 fe80::a9d9:4618:2ae4:d7e5/128
On-link
1 306 ff00::/8 On-link
10 276 ff00::/8 On-link
11 281 ff00::/8 On-link
===========================================================================
Itin‚raires persistantsÿ:
Aucun
Début de la page Informations de protocole
Protocol Bind Information
SSTP based VPN
Microsoft TCP/IP version 6 - Tunnels
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Internet Protocol (TCP/IP) - Tunnels
Microsoft NetbiosSmb
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IP ARP Driver
Miniport WAN (IP)
Message-oriented TCP/IP Protocol (SMB session)
WINS Client(TCP/IP) Protocol
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IPv6 ARP Driver
Miniport réseau étendu WAN (IPv6)
Point to Point Protocol Over Ethernet
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Point to Point Tunneling Protocol
Layer 2 Tunneling Protocol
Remote Access NDIS WAN Driver
WAN Miniport (SSTP)
Carte asynchrone RAS
Miniport WAN (PPPOE)
Miniport réseau étendu WAN (PPTP)
Miniport réseau étendu WAN (L2TP)
Link-Layer Topology Discovery Mapper I/O Driver
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Link-Layer Topology Discovery Responder
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
NDIS Usermode I/O Protocol
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Début de la page Informations sur les équipements
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Device ID : PCI\VEN_10EC&DEV_8168&SUBSYS_FF001179&REV_02\4&492937F&0&00E2
Status : Enable
Driver Vender : Realtek
Driver Version : 6.205.403.2008
Driver Date : 4-3-2008
Intel(R) Wireless WiFi Link 5100
Device ID : PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00\4&3905AE0C&0&00E3
Status : Enable
Driver Vender : Intel
Driver Version : 12.0.0.73
Driver Date : 4-27-2008
Bluetooth
Device ID : ACPI\TOS6205\5&F592293&0
Status : Disable
Bluetooth Version : v6.10.07.2(T)
Début de la page Statut du commutateur de communications sans fil et de la touche d'accès direct pour réseau sans fil
Wireless Communication Switch : On
Wireless Hotkey (Fn + F8)
Wireless LAN : On
Solved!
Go to Solution.

Try this -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
On your Vista Laptop, first disable the Wireless Network Connection and restart the Laptop, then Enable the Wireless Connection...
Then Click on Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Network and click on Add, select Manually Create a Network Profile and click Next, enter your Network SSID/Network Name, select WEP for Security type and enter your 10 digit Network Key and click on Next, it should say "Successfully Connected to ____" close all the Windows and restart the Laptop, now see if you can connect to Internet Wirelessly...

Accessing 10g DB with 9i OEM

Similar Messages

Maybe you are looking for