Accessing a Collaboration room without the Portal masthead

Hi,
I have the URL to the Collaboration room I created.
I want to provide the link to the room to the user and it should open in the same window.When Iam trying to open it in the samw window in the content area, I am again getting the coll. room opened with the Portal masthead(welcome area,navigation etc.,).Is there a way to create a link to the room without the portal header?
I assure to reward points to all those who help me.
Thanks & Regards,
Vasu.

Hi Rabih,
Finally, I solved it on my own.
Here is the soln.,
First create a copy of the Default framework page and edit it. Untick the visible checkbox for Portal masthead, toplevel navigation and detailed navigation.Save it.
Create a URL for accessing this link like irj/servlet/pcd...
Now coming to the coll. room URL, create a URL iview with the above URL and pass the Collaboration connector as parameter to the URL iview.
It worked for me.
If u need further clarification,mail me at [email protected]
If the above answer is helpful, consider rewarding points.
Thanks,
Vasu.

Similar Messages

New Collaboration Features of the Portal

Hi,
Do anyone of you know when some of the New Collaboration Features of the Portal is released.
I know that some of the features already are released, but I am especially interested in the new Team workspaces (next-generation of collaboration rooms) and the standard integration to MS Sharepoint.
I found this document
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e00ddbb1-1d2e-2a10-75b0-add05c50ef00]
which stats Q1 2008, but that does not seem to hold. So do any of you have more recent information about the release plan?
Regards,
Henrik Andersen

Hi Henrik,
The beta shipment of the first feature wave of the collaboration portal started end of March, as mentioned [here|https://www.sdn.sap.com/irj/sdn/nw-collaboration#section10].
Only some selected pilot customers have access to the beta shipment. The features that you mention are included in this beta shipment.
The Collaboration Portal should be available once the ramp-up phase is completed.
You can find also further information in this blog by Vera Gudbrot: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/9027
Hope this helps,
Robert

Creation of Collaboration Room from the backend.

Hi,
I need to create the collaboration room from the backend. When I tried to do so, its showing the error "Error in RFC Connection". I checked the RFC connection, its working fine.
Do i need to set any configuration properties either in portal or R/3 to enable the creation of collaboration room from the backend.
Kinldy provide your valuable inputs.
Thank you.
Regards,
Eben

Hi,
If ur talking abt creating rooms from backend in e-learning then thier is some configuration document for that
Please check..
Thanks and regards,
sarang

Crawler on DEV portal to index collaboration rooms on PROD portal

Hi,
We have two portal systems (HP-UX (IA64W) B.11.23)
System1 / NW2004 SP17: DEV
System2 / NW2004 SP17: PROD
TREX is running on a separate Windows 2003 server. All crawler tasks are configured on our DEV system. The PROD portal uses the created index's.
Unfortunately the DEV system (crawler) can't find and index our
created collaboration rooms on the PROD portal. How can I configure the DEV portal or the crawler to find and index the content of the collaboration rooms on the PROD portal?
Is this possible?
Best Regards,
Stefan

Hi Luciana.
Collaboration can run only on the central consumer portal (refer to SAP Note 1295708).
Best regards,
Aliaksandr Zhukau

You have attempted to access a secure page without the appropriate authorization. I have used this website every week and today received this error message. I can access it with Internet Explorer.

I received an error message after attempting to log in to a website. Access prohibited. You have attempted to access a secure page without the appropriate authorization.
I access this website at least twice a week and now I get this error message. I am able to access this website through Internet Explorer. Is there something I can do to fix this problem, so I can use Firefox?

Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

Test PCUI without the Portal??

Hi there,
i have a question. I am not famliar with BSP applications. So i hope you can help me.
We have the SAP CRM PCUI in our Portal.
So i wanna test now the BSP Application without the Portal.
I went to Content-Administration and in the iView of the PCUI
There i can see such things:
Applicationparameter: appl=CRMM_ACCOUNT&blview=ZMMB_V_ACC&sap-syscmd=nocookie
Business Server Page (BSP) Application CRM_BSP_FRAME
Startsite entrypoint.do
Then i go to the CRM on ABAP side and called the SE80
There i found the package: CRM_BSP_PCF
And in there the BSP Application: CRM_BSP_FRAME
When i wanna test this Application a new window opens where i can choose the .do file.
I choose the entrypoint.do
The IE opens and a error occurs:
No Application Was Transferred to the Framework
Exception-Klasse CX_CRM_BSP_GENERAL
Fehlername
Programm CL_CRM_BSP_FRAME_MAIN=========CP
Include CL_CRM_BSP_FRAME_MAIN=========CM001
ABAP-Klasse CL_CRM_BSP_FRAME_MAIN
Methode DO_REQUEST
Zeile 55
Langtext -
So how can i test the application from the ABAP side?
Can someone help here?
Regards
Edited by: Bjoern Bayerschmidt on Feb 16, 2010 8:27 AM

Hi,
This kind of error because of the inconsistency in the Field group customizng. Keep a breakpoint in the exception and back track to the class. Or keep a breakpoint in class CL_CRM_BSP_FRAME_DETAIL method READ_FIELDGROUP. Here you should be able to find the fieldgroup responsible for the exception. Later you can correct the fieldgroup. You can also run the consistency check for the suspected fieldgroup in trx crmc_blueprint.
The best option is to identify the fieldgroups in the application where you are encountering the dump and then check the fieldgroups. In most cases, there is no issue with fieldgroup, it is more to do with layout generation. Please regenerate the layout for the field group.
Please do let me know in case of any issues.
Thanks & regards,
Bhavya

Integrate TLN with the Portal Masthead

Hello Experts,
I am trying to integrate the top level navigation with the portal masthead. Please let me know if you know of any poosible soulution for the same.
I have a custom jsp file "X.jsp" which I have used to modify the TLN as per my requirements. I have now downloaded the masthead par file and trying to include the "X.jsp" in the branding image area of the "HeaderView.jsp" as in the below line:
<TD><jsp:include page='header.jsp'/></TD>
However, the content of the TLN is displayed above the masthead instead of in the branding image area.
Looking for answers,
Thanks and Regards,
Anil Sabbani

Thanks. That worked. Do you know if there is the potential for class version conflicts when you upgrade portal versions? I would suspect there is if I don't update the referenced .jar and re-deploy my project after an upgrade has been done.
Also, I tried to find where I can reward you point, but could not find it. Do you know how?
Thanks again,
Steve

How to create a collaboration room of the SAP Portal from EJB tier.

Hi.
I have created a EJB Stateless Session Beans, and I want to create a room using the API of KM.
I have used the code mentioned in this URL: http://help.sap.com/saphelp_nw04s/helpdata/en/7d/c69c42d706c66ae10000000a155106/content.htm
It works fine it is called from Web Dynpro.
I have added in my application-j2ee-engine.xml of the J2EE Proyect.
<application-j2ee-engine>
     <reference
          reference-type="weak">
          <reference-target
               provider-name="sap.com"
               target-type="library">com.sap.km.application</reference-target>
     </reference>
     <reference
          reference-type="weak">
          <reference-target
               provider-name="sap.com"
               target-type="library">com.sap.netweaver.coll.shared</reference-target>
     </reference>
     <reference
          reference-type="hard">
          <reference-target
               provider-name="sap.com"
               target-type="library">com.sap.security.api.sda</reference-target>
     </reference>
     <provider-name>sap.com</provider-name>
     <fail-over-enable
          mode="disable"/>
</application-j2ee-engine>
It was deployed correctly, but when I tried to call the method the server sent me this exception:
Caused by: javax.ejb.EJBException: nested exception is: com.hocplc.speed.exception.BaseException: com.sapportals.wcm.WcmException: Exception accessing CmSystem: com/sapportals/wcm/crt/CrtClassLoaderRegistry
at com.hocplc.speed.business.ejb.facade.ProcesarSolicitudDocumentoSSBean.crearCuartoColaboracion(ProcesarSolicitudDocumentoSSBean.java:188)
at com.hocplc.speed.business.ejb.facade.ProcesarSolicitudDocumentoSSLocalLocalObjectImpl0_0.crearCuartoColaboracion(ProcesarSolicitudDocumentoSSLocalLocalObjectImpl0_0.java:991)
... 25 more
javax.ejb.EJBException: nested exception is: com.hocplc.speed.exception.BaseException: com.sapportals.wcm.WcmException: Exception accessing CmSystem: com/sapportals/wcm/crt/CrtClassLoaderRegistry
I hope that somebody can help me
Regards in advance.
Manuel Loayza
Living La Vida JAVA

After playing with WebDynPro and PDK - finally I have a simple list showing. This simple example has provided me with a good starting point - it is a pity that SAP do not provide such simple examples to allow you to get your head around the concepts.
I used the SAP NetWeaver Developer Studio to produce a version of my example using a WebDynPro and a JSPDynPage (PDK). Deployed to my EP6 server and then created iVews to show then in the appropriate theme.
My thoughts on this now are that both WebDynPro and PDK have merits - both achieve same end result with various affects. WebDynPro is clunky and PDK is not tighly integrated with the Studio (unlike the .NET one).
To use the PDK you need to understand the TAGs and the SAPDesignGuild website helps - but would be better if the Studio presented a graphical interface much like DreamWeaver does.
SAP's direction seems to be with WebDynPro and no longer PDK - wonder if this is truely the case ?. SAP does have a lot of work to do in my opinion to get both products up to scratch from a useability point of view.

Collaboration Rooms on Federated Portal

Hi:
We have configured collaboration Rooms in our producer portal. We want to show them on consumer portal using a remote role created on producer.
When we assign the remote role on the consumer , the rooms are not shown completely.
Is there a limitation on using remote roles with collaboration rooms?
Thanks,

Hi Luciana.
Collaboration can run only on the central consumer portal (refer to SAP Note 1295708).
Best regards,
Aliaksandr Zhukau

Adding Roomparts to Collaborations Rooms - without folders?

Hi All!
I have a question regarding RoomParts in collaborations rooms.
When i try to add a RoomPart to my existing collboration coom
they always gets added as a folders with a link to the part.
But this i not very "handy" because all the other parts of the room are just normal links in the detailed navigation area, and then the added Roompart looks confusing when it is added as a folder.
So is it possible to add a Roompart which will show up as a Link instead of a folder?
Help is much apreciated.
Best regards.
Ronni Hostrup

Hi Ronni,
If you Try to add SAP room parts in your existing room,they would be added as a folder into a room,because this is the way SAP have delievered.
If you want to add Room part as a link,you can develop your custom room template using custom Workset and then create collaboration room using that Template.
Hope This Helps
Assign Points if Useful
Regards
Rani A

Increasing the height of the Portal Masthead ?

Hello, I'm new to SAP EP. Wonder if any of you experts can assist. We're currently implementing EP version 7.0.
How do I adjust the height of the masthead (we are increasing the size of our logo on the masthead and consequently we will need to increase the height of the masthead)?

hi,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e549a890-0201-0010-3f8b-d3b852457ebd
Go through this pdf. you need to create a new desktop by applying new desktop framework page and themes as specified in the guide. Before that in portal go to System administration -> portal display -> desktops & display rules. In that select a theme and save as 'new theme' for example. When you click 'new theme', preview opens. In it select 'portal masthead', under which there is an option 'Masthead Height'.
In it you can specify the height in terms of px in accordance with your height of the logo. You can even insert a new logo from the 'url to logo' option under it.
Save the theme and this is the new theme which you should assign it to new desktop.
Hope it helps...
Revert back if you have any doubts.
Regards,
Ganesh N
Reward useful answers

Getting portal hostname and displaying on the portal masthead.

Dear SCN
I have some requirement, where in my portal masthead I need to display some string based on the portal hosname.
eg, if my hostname is portaldev.abc.com then in my masthead I need to display a string portal development system.
I am new to the portal development, can somebody pls suggest me in getting the portal hostname and pls give me some code snippet on this. appreciate your help , many thanks.
Thanks
RAD

The following portal component could be used to replace your masthead iView . Basically it makes a small table which has the normal masthead plus a bit of code that works out which host you're on and puts out a message,
Make an iView from it and add it to your framework page in place of the regular masthead and you'll then get the appropriate information.
public class WhoAmI extends AbstractPortalComponent
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
          IPortalComponentProfile profile = request.getComponentContext().getProfile();
          StringTokenizer st = new StringTokenizer(System.getProperty("SAPMYNAME"),"_");
          String message1 = "You are on the ";
          String host = "development";
          for (int i=0;st.hasMoreElements();i++) {
               String s = st.nextElement().toString();
               if (i==0) {
                    if (s.equals("abcdef")) host = "production";
          String message2 = " server";
          response.write("<div id=\"WhoAmIArea\"><table width=\"100%\"><tr>");
          response.write("<td align=\"left\" width=\"90%\"><iframe width=\"100%\" height=\"38\" src=\"/irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.masthead.default\"></iframe></td>");
          response.write("<td align=\"right\" width=\"10%\">");
          response.write("<span class=\"urTxtStd\">"+message1+host+message2+"</span>");
          response.write("</td></tr></table></div>");

Calling a page without the portal wrap

I have a portlet with a form in it.
The form:
<netui:form action="toggleFavourite" onSubmit="return toggleFavourite(this)">
If the user has JavaScript DISABLED, the form works like an ordinary form - the page submits itself.
If the user has JavaScript ENABLED, the "toggleFavourite()" function is called, which submits the form entirely in JavaScript by extracting the target of the form, and calling it in script. This means that the page doesn't have to be reloaded.
When using the non-JavaScript method, I obviously need the form to submit, and come back with my portal page, including the portlet I submitted from (i.e. exactly as it normally does in WebLogic portals).
Whe submitting using JavaScript, I don't need the response to include any of the header/footer/pages/other portlets - I just want to return the single page referenced by the Page Flow (i.e. the page specified in the Forward action).
Is there anything I can add/change in the URL that's submitted in JavaScript to specifically tell the portal server to ONLY return the content within the specific JSP referenced in the Forward action?
The reason I'm asking this, is that it's a lot slower pulling down the entire portal page, than it would be to just return that single portlet content.
I hope I've explained this clear enough, but feel free to ask questions.

Nearly there.
I can now generate a URL to the portlet, along with parameters to pass in. All that's left to do is trigger the action to make use of the parameters.
It's beginning to sound very much like a bodge job - like we're trying to do something that hasn't been catered for. I've actually managed to get something working now, using a different bodge. I want to call the current portlet, calling the action "toggleFavourite". I therefore now do this:
PortletPresentationContext portCtx = PortletPresentationContext.getPortletPresentationContext(request);
String paramName = portCtx.getInstanceLabel();
paramName += "_actionOverride";
String paramValue = portCtx.getPortletUri();
paramValue = paramValue.substring(0, paramValue.lastIndexOf("/")+1);
paramValue += "toggleFavourite";
StandalonePortletURL url = StandalonePortletURL.createStandalonePortletURL(request,response);
url.addParameter("_nfpb","true");
url.addParameter(paramName, paramValue);
String postbackURL = url.toString();
I then have a form elsewhere in the page, and use JavaScript to take the parameters from the form, and append them to the URL generated above.
It's working, but it's not pretty!
Sounds like 9.2 will be the only clean option.

Allowing the team to enter the practice room without the host

how to disable and allow the group to enter without the host granting their entrance?

hi,
that to validate from list is not my problem.
if i set the property -required to 'yes' then it will not allow to select value from lov which i am calling from button.
that means next to currency code field i kept button which shows lov when user pressess the button. since i kept 'required property' to 'yes' the field is not allowing to press the next button. user has to press 'f9' or he has to enter manually.
so i removed 'required' to 'yes' but if user leaves the item and try to save i am getting oracle error 'cannot insert null' error.
how can over come this?
what i am expecting is if the 'currency code' is null and user tries to save or leave the record, the cursor go to currency code and it should force the user to enter the value.
how can i acheive it through?
Thanks..

I have downloaded a tv ep in itune .. How do I access and watch it without the internet?

Hi please help

If you've downloaded it on your iPad then it should be in the built-in Videos app :
You should be able to watch films/tv shows that you've downloaded directly on your iPad, and/or synced from your computer's iTunes, in that app without needing to be online.

Accessing a Collaboration room without the Portal masthead

Similar Messages

Maybe you are looking for