Accessing ACS 4.2 via https getting 'website declined to show this webpage'

Hello
I have a self signed certificate on an ACS 4.2 Windows machine. I open a browser port to https://ipaddress:2002 of the acs and get the certificate error message as expected. When I proceed to the site then check the certificate via the shield on the top of the browser it shows is issued to ACSCOSC216_7. I install the certificate via the IE certificate import wizard.
I then connect to the acs via the poper fqdn at htts://ACSCOSC216_7:2002 login with my account but now get;
The website declined to show this webpage.
pls help!
tnks!

Do you have the https option checked under the session policy settings under Administration Control set?
Here is a screenshot:
Let me know if this helps,
Tarik Admani

Similar Messages

Can't install, get error message that says "The website declined to show this page"

I've been using Firefox for years now, but recently I had some problems with my computer and had to re-install Windows. I am now running Windows 8.1. I can't install Firefox now. It's very strange. When I attempt to install, I get an error message that says, "The website declined to show this webpage". It says the most likely cause is that the website requires you to log in. I have never experienced this issue before and like I said, I've been using Firefox for years. My anti-virus software found that the installation is accessing a web resource called DynamicOfferScreen, so I think the installation is corrupt. Can someone send me a link to download a clean installation?

You might have loaded an unofficial bundle advertised as a Firefox download...
Please start with the Windows Control Panel, Uninstall a Program. (Use the charms bar search box if necessary to find it.) Click the "Installed on" column heading to group by date and reveal what bundled items may have snuck in. Remove everything you do not know to be legit and valuable.
Next, in Firefox, review your extension and disable/remove anything unrecognized or questionable. if in doubt, disable. You can do that on the Add-ons page. Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions.
Finally, after clearing those out, mop up with some of the scanning/cleaning programs listed in our support article: [[Troubleshoot Firefox issues caused by malware]].
Back to normal?

Can't get read-only access to my switches via http

I set up a couple of users for read-only access to our switches via their web browsers. I set this up in Network Assistant. However when we try to log in, only a level 15 user is allowed to log in and there doesn't seem to be any way change this.
I know in Network Assistant, you can choose which user level you want, but I don't see any way to do it via the web interface.
What am I missing here?

Implementing security within a switching environment is less intuitive than in a router. Switches, by design, tend to recognize only two levels of administrative access - user exec mode or privileged exec mode. Implementation of security at different access levels, level 15, etc, can be tricky and should be done at the command prompt, not in the GUI.
You should reset your config and do not use Network Assistant for this purpose; it is "buggy."

Using ADFS authentication to perform SSO via HTTP GET request

Hi,
Can i authenticate users (those users are clients, at home) to a web application using ADFS without SAML tokens?
The situation is that i want the clients to perform SSO to the website via a link they receive in their mailboxes.
I thought about a solution that combines JWT in a URL link that each user will get to his private mail. this link will contain the users' claim (such as ID Num, given from AD DS Server dedicated especially for them).
Thus, the user will receive an email with a link that already contains a short period of time JWT to perform SSO to the webapp.
Is it possible ? anybody heard about a similar solution ?

Sandra
Thanks for your message
Here is the my requirment
The basic flow of a Where 2 Get It REST API call is:
1) create the required XML structure,
2) URI encode it,
3) make a HTTP GET request,
4) then parse the return XML document.
Currently i have some data in ABAP structure with 5 fields, i need to create XML from the those 5 fields,and needs to be URI
encode it, and then needs to make a HTTP get request to connect Where to Get It REST API, finally it will return XML document via HTTP Get request , and then needs to convert the return XML to ABAP structure for further processing .the above 4 points will be implemented in my report.
Any body could help on this

In Safari 7.0.3, how do I get website ICONS to show up in the bookmark favorites toolbar?

RE: Bookmarks/Website Icons in Favorites Bar
In Safari 7.0.3, does anyone know how to get website ICONS to show up in the bookmark favorites toolbar?
Blue dots with the website name in text show up in the favorites bar.
The website icons do show up in the bookmarks sidebar.
Thanks!

Nope, they don't - and we are up to version 7.1 now. I have done a good bit of searching on this subject, and it is a frequently asked question. I don't understand why Apple don't implement it. It is the only reason I am currently using Chrome instead of Safari. I have too many bookmarks on my toolbar for them all to have names, using the icons allows me to pack them in tight and have instant access to lots of sites I use frequently.

Accessing Sub Calendars in via HTTP Web Calendar

Hi,
I'm trying to work out how to display all of my calendars on the web calendar interface in OS X 10.5.5
I am accessing the server : http://diary.local which give me a login prompt, I successfully log in and then go to Calendar, it says please wait while populating, but then doesn't actually populate anything.
I have sub-calendars within my account which I use for 'holidays','cars','My Plans','Room Bookings' etc - all of these are shared for delegation, so need to be kept seperate.
How do I enable the web calendar to be able to view all of these diaries as well?
I've tried phpiCalendar - but that only allows for a single calendar (and loads all the .ics files), however the directory structure has all of them in different folders, so this doesn't work in my case.
Many thanks,
Carl.

This is a MS problem, they force you to use a light owa version when not using internet explorer.

I have been using the kindle app to load books on my ipad. For the past two days I cannot access those books. I might get one page to show then the screen will freeze and I can't turn the page. Does anybody know what is going on. Help!

For the past two days I cannot access my kindle books on my ipad. I might be able to get one page of a book to appear but then it freezes and I can't turn the page. I tried turning my ipad completely off and then on again. Any ideas to fix this?

Start by doing a reset ,you will not lose any data
hold home /sleep button until Apple logo appears ignore off slider
first try closing Kindle App on iPad

Error while loading the runtime repository via HTTP

Hi Experts,
I am trying to delete an enhancement and when I enter the component name and the enhancement set in BSP_WD_CMPWB. I get the following error when right click the enhanced view and select delete : Error while loading the runtime repository via HTTP. How do I delete this enhancement?
Regards
Abdullah Ismail.

if for some reason the runtime repository is not coherent, you get an error each time you try to read it (and this is the case when you open a component using the transaction BSP_WD_CMPWB)
this is because the XML file is interpreted by a CALL TRANSFORMATION statement, and any incorrect node will raise an uncaught exception
solution:
enhanced view is contained into BSP application you have created the first time you enhanced the component
go to SE80 and enter the BSP application where your objects are stored (the name you provided the first time)
there you can modify directly the objects, including the runtime repository which is stored under node "Pages with flow Logic"
once the correction is done, you can access again your component through transaction BSP_WD_CMPWB (and delete it properly if this is what you want to do)

Cannot access ACS 5.3 installed in a VM

I installed ACS 5.3 on a VM machine for evaluation. The install went fine as I used the recommended settings in the install guide. All the services are up and running when I issue the "show application status acs" command.
I am trying to access the web page via http://192.168.1.199:2002 and it just times out. I can ping the server and the server can ping my machine.
Any help would be greatly appreciated.
Seth

Hi Seth,
ACS 5 is accessible via http, pleases try https://192.168.1.199/
This is user guide:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/my_wkspc.html#wpxref67152
Please rate helpful posts
Best Regards,
Eugene

Code sample HTTP get for J2EE server

Hi,
could somebody pls. provide a code sample to access a SAP WAS J2EE server via HTTP GET?
I needed this to get a SAP Logon ticket issued to my web dynpro application. Basically I am imitating a logon to the server in order to get the logon ticket in return. This is the same as logging on using IE to http://server.domain:5xxxx. Should my user credentials be valid, the HTTP get would return a SAP Logon ticket (among other data).
Thank you,
Rene

how would you direct the GET requests to one servlet and the POST requests to the other?
Wouldn't they need to pass thru' yet another servlet to decide which is which (GET or POST), and redirect them accordingly?
I would have both GET and POST handled by the same single-point-of-entry servlet. For example, not all data is sent to the server via a POST - you can send form data via a GET, using name/value pairs in the url.

SOAP Server - HTTP GET

Good afternoon, I'm trying to test my class:
public String getOperation(String methodName, String[] paramNames, Object[] paramValues) throws Exception
int size = 0;
          int i = 0;
          // Crear el stub cuando no exista
          if (!estado)
     prepareStub();
//Invoca un método de un servicio Web
          WebServiceMethod wsm = wsp.getMethod(methodName); //WebServiceProxy
          // Falta establecer los parámetros, aquí es donde se envían los parámetros
size = paramNames.length;
          String[] inMsgPartNames = new String[size];
          Object[] inMsgPartValues = new Object[size];
          for(i = 0; i < size; i++)
               inMsgPartNames[i] = paramNames;
               inMsgPartValues[i] = paramValues[i];
          //Object objRet = wsm.invoke(inMsgPartNames,inMsgPartValues);
          //String resp = (String)objRet;
String resp = "";
          return resp;
I want to invoke dynamically a Web Service, but I get this SOAP message
<html><head><title>SOAP Server</title></head>
<body><h1>SOAP Server</h1>
<p>Sorry, I don't speak via HTTP GET- you have to use
HTTP POST to talk to me.</p></body></html>
Could you tell me. how can I test my class, with a local Web Service?

Hi Veronica,
I had the same problem yesterday. The "magic" is getting the URL right. If you look at the deployment information you will see that the test URL is something like http://localhost:8888/Workspace1-ModelWebService-context-root/JavaClass1 (my test class was JavaClass1). You can change the URL relative address, but the default will be what is shown.
Best,
Joe

Manage Access to Named Credentials via EMCLI

Hi Colleagues,
does anyone know how to manage access to Named Credentials via EMCLI or does anyone know if this function exist in EMCLI.
We want to configure the access via scripts, so that we can for example grant access for all database administrators to all named credentials.
I would be very pleased if anyone has a solution.
Thanks in advance!
Best regards,
Sönke

Hi,
Use the verb grant_privs to grant a user access to a named credential.
For example:
emcli grant_privs -name=MARY -privilege="GET_CREDENTIAL;CRED_NAME=HOST-CREDS:CRED_OWNER=SCOTT"
..grants the user MARY view privileges on the credentials called HOST-CREDS owned by SCOTT.
View privileges will allow Mary to use the credentials but will not allow her to see sensitive information such as the password.
Check out the security doc for more information on named credentials
http://docs.oracle.com/cd/E24628_01/doc.121/e36415/sec_features.htm#CJAHBADG
Other privileges you can grant to credentials are FULL_CREDENTIAL and EDIT_CREDENTIAL.
Check out the EMCLI reference guide for more details on grant_privs verb:
http://docs.oracle.com/cd/E24628_01/em.121/e17786/cli_verb_ref.htm#autoId186
Regards,
Ana

POA crashes when streaming contacts via HTTP

Hi,
streaming messages and calendar items as RFC 822 works like a charm.
But when streaming contacts of an address book via HTTP the POA crashes?
Is this a known issue or is it possible at all to stream address book items?
My environment:
Groupwise 8.0.0 on Windows 2003 Server (german)
Thank you in advance,
Thilo

There is no support to stream contacts.
I'll create a bug to prevent processing of contacts
in the streaming code (which will prevent the crash).
Preston
>>> On Monday, May 30, 2011 at 1:35 PM, Thilo Brüßhaber<[email protected]>
wrote:
> Hi,
>
> streaming messages and calendar items as RFC 822 works like a charm.
> But when streaming contacts of an address book via HTTP the POA crashes?
> Is this a known issue or is it possible at all to stream address book
items?
>
> My environment:
> Groupwise 8.0.0 on Windows 2003 Server (german)
>
> Thank you in advance,
> Thilo

Getting RuntimeException while sending a JMenu Object via http

Hello,
since Java 1.5.0 i use a mechanism, which transfers a JMenu from my servlet object to my applet object via http.
Now since 1.5.0_02 i get this Exception while doing it:
java.security.AccessControlException: access denied (java.lang.RuntimePermission accessClassInPackage.sun.swing)
Now there is nothing to find about this. Not here in the forums, neither in google or anywhere else.
My guess is, its a matter of deserialization of thoses Jmenus.
Anybody out there with the same problem?
Anybody knows how to solve this WITHOUT changes the policy?
thanks
steffan

The directory that contains msgsend.class (usually the current directory)
is not in your CLASSPATH setting. Be sure that "." is included as one of the
entries in CLASSPATH.

I'm trying to access an Airport Express via the internet using ipv6, it it possible? I get the icon under APU 5.6 but it times out getting details

I've managed to have only an ipv6 address for an Airport Express in Spain and I cannot access it from the UK, Local pc (Windows) does not show it under Airport Utility for Windows, Airport Utility 5.6 show it here (via VPN) but will not download details.

I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Accessing ACS 4.2 via https getting 'website declined to show this webpage'

Similar Messages

Maybe you are looking for