Accessing all parts of the document page

i am using and upgraded version of PM7 on a windows vista computer. in earlier versions there was a "grabber" available, a little hand that could be used to grab the page and move it up or down or to either side. i cannot find this tool on this version of the program or in the help documents. can you tell me if it is still available and how to access it. thanks.

You may want to take a look at this thread:
http://www.adobeforums.com/webx?128@@.59b5f166

Similar Messages

I use a web site called ACRIS- up until yesterday I could access all parts of the site, including calling up images of deeds. Now I can no longer get the images via firefox, but can them via windows explorer. Why? How do I fix this?

I use a web site called ACRIS- it allows me to access NYC Finance dept records- specifically images of deeds. Up until yesterday I had no problem. Then without any apparent reason I could access all parts of the site, but could not access the deed images. First I thought it was a problem on their end, which sometimes happens, but after waiting 24 hours I was still having the problem. Then I tried windows explorer and it worked without any problem. How do I fix this?

Hi jeffbeal,
First question I would ask is what has changed recently? Did you add any new extensions or add-ons?
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

We are unable to open a Pages 5.0.1 document in Pages 4.2 and retain ability to edit all aspects of the document. I have tried saving the 5.0.1 version as Pages '09 and am still unable to open it in the earlier version of pages. Help?

We are unable to open a Pages 5.0.1 document in Pages 4.2 and retain ability to edit all aspects of the document. I have tried saving the 5.0.1 version in Pages '09 but am still unable to open it in the earlier version of pages. Help?

No, it isn't. Pages 5 isn't compatible with Pages 4.3 as it is lacking more than 90 features that Pages 4 has. So when you open a Pages 4 document in Pages 5 only the simplest documents will look the same in Pages 5.
Pages 4 can't open Pages 5 documents at all!! You have to export back to Pages 09 as I said above.
You probably will be more happy if you just use Pages 4 (Pages 09). There are many threads in this forum that describes the lack of compatibility between the two versions. Pages 5 is in my view not Pages anymore.
If you don't desperately need Pages 5 for moving documents over iCloud to new iOs devices don't use it.

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same docum

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same document and it comes out fine. Any ideas ? Using Windows 7 Service Pack 1

Sorry my bad. I have tried to print the same document on another printer and all the formatting is fine.

Why are there so many more choices on the USA iTunes Store? Surely having an iTunes account should let you access all itunes availability the world over? Also how do you request films/tv series to the UK itunes?

Why are there so many more choices on the USA iTunes Store? Surely having an iTunes account should let you access all itunes availability the world over?
Also how do you request films/tv series to the UK itunes? There's tv series I'd like but they're incomplete like The Batman & Xena Warrior Princess. And films theta aren't available for download but you can purchase in a store like HMV? Apple isn't doing itself any favours by secluding countries by their store. They'd make billions if you could just select the iTunes Store you want to search & purchase from just by signing in! If anything what they're doing is putting themselves into a corner, other companies like Samsung & HTC are already on too of them for innovation & ease of use. The people they're attracting are predominantly existing Apple users not new customers. What do you guys think?

It's not Apple's choice, they can only sell a particular item where the content provider/rights-holder has granted them a license to sell them. Content is licensed by the rights-holders to Apple on a country-by-country basis, each country therefore has to have its own store, and you have to be in a country to use its store - they want control over where their content is available.
You can try requesting that an item be added to the UK store via this page, but unless the rights-holder agrees to then Apple won't be able to sell it here : http://www.apple.com/feedback/itunes.html

Can I change the mustard colour of the top part of the firefox page?

I've just installed Firefox 34.0 on a new windos 8.1. netbook. The top part of the firefox page - the part the tabs titles and the menu bar sit in - is a rather ugly mustard yellow - does anyone know how to change this colour? Thanks.

Sorry about the sequence of this reply. Screenshot as requested - horrible isn't it!!
Meanwhile it's solved thanks to Alan and Cor -el. Alan the problem existed from installation but I'll remove the banner thing just in case.
Both of your various instructions did take me to 'themes' once I put my brain in gear and I've started to test different colour options..
Many thanks to all
I don't quite understand why Mozilla opted for mustard though!! Maybe this is only in windows 8.1, which I've been using for a few days now?

XPath+XSLT: Re-adding parts of the document after XPath eval. (fragment)

Hello all,
Sorry, I know that this is not strictly a Java related problem, but who knows if there are standard API functions for that...
Imagine this simple XML document:
<document>
   <meta>
     [some deeper structs]
   </meta>
   <content>
      <chapter id="1">
      </chapter>
      <chapter id="2">
      </chapter>
      <chapter id="3">
      </chapter>
   </content>
</document>Normally, I transform the entire document via XSLT e.g. to XHTML. But if I want just to extract e.g. the first chapter using XPath evaluation, I do not have other "static" parts of the document, e.g. the meta part or the document root.
Currently, I am adding this very complicated by having the XPath evaluation as a string and by prepending and appending the "static" part in order to have a fully working XSL transformation (e.g. "<document><meta>[...]</meta><content>" + xpathEval + "</content></document>")...
Are there any best practises? I think using XPath is very nice for this kind but maybe the wrong way and I should filter another way? Hope there is an elegant way whith sticking to XPath though...
Thanks and regards,
Timo

Rehi DrClap,
Thanks for your reply.
Yes, that is pretty fine, but the problem is that I have some "static" parts like the "meta" tree are outside the "chapter n" tree.
And just selecting for my chapter will result in just that tree but not the entire document pattern including the document root and the meta part.
XSLT being more SAX'ish, I think I have to rebuild my document using DOM in a way that I do some consecutive XPath selections like for meta and chapter, create the root node, append them and then XSL transform that new document. However, that are much steps and not good for larger documents.
Thx and regards,
Timo

I am having trouble printing and am only getting part of the document which i have no margins set any help??

i am having trouble printing and am only getting part of the document i have no margins set any help??

What version of Pages?
What Printer?
If it is Pages '09, turn Comments off.
Peter

I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

keokipineapples schrieb:
I do have all of my files I am working on located on an external drive. I plan to transfer them directly to the hard drive
Transfer them to your harddisk immediately.
External drives are not offiially supported and the source of errors of all kinds including complete loss of files.
Illustrator support for networks and removable media

Blank space in the header part from the second page onwards.

Hi,
I am having a 16 pages report where there the header part comes in only first page and the data flows to 16 pages
from second page onwards i am getting a empty space in the top portion (header part of the first page).
the property of repeating frames are
vertical elasticity=Yes
page protect =no
Base printing on =enclosing object.
keep with ancoring object=no.
please advice.

I think that you may find that the stuff in the header is set to print on First Page rather than All Pages. Try looking at the items and change.
Dave

I am getting the following error message when i download CS6 Design Standard 'The message says" the file archive part of Adobe CS6 Design Standard is missing. you need all parts in the same folder in order to extract adobe CS6 Design Standard. Please down

i am trying to download CS6 design standard. but it wont work. the second part of the download comes up with the following message "The message says" the file archive part of Adobe CS6 Design Standard is missing. you need all parts in the same folder in order to extract adobe CS6 Design Standard. Please download all parts."
Does anyone know what to do?

Do as it says: Put your downloaded 7z file and the *.exe in a proper folder, not just dump it onto your desktop or whatever.
Mylenium

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

The main part of the safari page is grey and won't respond/can't type in any commands. I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?

The main part of the safari page is grey and won't respond/can't type in any commands. I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?
Help, please.

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to ex

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to extract Adobe Photoshop Elements 13. Please download all parts.: I've also gotten an Exit Code: 7 when trying to install. I've turned my McAfee virus system off while trying to install.

Hi,
Have you tried downloading Photoshop Elements 13 from here?
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
There is only one file to download - which one depends on your system (32-bit or 64-bit).
These are the trial versions but will convert to the full version when you supply your serial number.
Brian

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/

Accessing all parts of the document page

Similar Messages

Maybe you are looking for