Accessing and using plugin-ins in Acrobat X

I have several 9.1 plug-ins that I would like to run  on Acrobat X.
I have installed a test system with Acrobat X and have copied the needed plug-ins into the plug-ins folder - but I cannot find out how to access them or run them .
Do I need to re-compile them ?
I was under the impression that I wouldn't need to re-compil;e them .
Thanks for any assistance ;

If the plug-in is not even loaded, chances are that something goes wrong
when the OS tries to link the plug-in to dynamic libraries. Verify that you
have all the libraries installed that are required to run the plug-in.
Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...
[email protected]
http://www.khkonsulting.com

Similar Messages

  • Mozila Firefox is always asking me to click to activate and use plug-ins like Adobe Reader, Flash, Youtube videos and other plug-ins which it never did before.

    I am using Mozilla Firefox and it is now bugging me. After updating it, it is now asking me to always click to activate and use plug-ins like Adobe Reader, Flash, Youtube videosand other plug-ins. I click on activiate all plug-ins but it still asks me to do it each time that I try to use Flash, Adobe Reader, watch a You Tube Video or anything. Why won't Mozilla Firefox automatically actaivate the plug-ins like it used to do. I tried to follow directions on our website for fixing this but it did not work. I am running
    Windows XP. Please let me know how to fix this. Thank you.

    In the past, to protect you from [https://support.mozilla.org/kb/use-plugins-play-audio-video-games plugins] that have stability or security issues, Firefox could only turn off the problematic plugin. Now Firefox can prevent the plugin from running automatically (which prevents many issues) and then let you choose to run or update the plugin. See [[Why do I have to click to activate plugins?]] for more info.
    If you'd like to Disable Firefox's Click-to-Play feature,
    # Type ''about:config'' in the address bar and press Enter.
    # Press the big button to bypass the warning.
    # In the search box, paste ''plugins.click_to_play''
    # In the search results, double-click ''plugins.click_to_play'' to set its value to '''false'''

  • How to backup files to ensure future access and use using a different mac

    I recently attempted access backed up data on my LaCie drive from a different Mac notebook. I was blocked. I didn't write down the message, but it essentially advised that the data was locked and I wasn't allowed access. I wasn't given a chance to enter any kind of system password to bypass the lock.
    Here is my problem: I recently spilled some wine into my keyboard. Since then, the system has slowed to a crawl and occasionally weird things begin to happen, regardless of which software I am using [eg iPhoto, Quickbooks, idvd, Photoshop, email, and even dashboard]. I know I am very lucky to have any access to my files at all. While I do, I need to back everything up so that I can have access to my files later on. I plan to have my Mac serviced this week. I don't know if it needs to be replaced, or whether it can be repaired.
    *+If it can't be repaired, how do I back up my files to ensure future access and use using a different mac?+*

    I'll check the example you linked. I appreciate you responding.
    I was not trying to boot another system at all. Actually, I was working on a newer mac laptop. I attempted to load a dvd I had created in my idvd on the other mac from the LaCie. I was using a mac because I knew it had all the iLife software I needed in order to work with my idvd components. Honestly though, I don't know if the mac I was using is intel based. I hadn't considered it. Does Apple sell macbooks with intel? No matter.
    So, let's see -- I was using the other powerbook to read the LaCie via firewire -- and yes, the LaCie has its own power supply.
    If I remember correctly, the denial I received [when attempting to load the idvd file] knew that I had created it. I got the feeling that it wasn't allowing me into the file for security reasons. I just don't remember setting security. Incidentally, I just checked and I do not have a master password set nor do I have FileVault protection turned on.
    I'll check that link you sent. Thx again, M~

  • How do I access and use my Itunes library from a different/new computer?

    How do I access and use my Itunes library from a different/new computer?  My computer is no longer working, so I need to be able to access my library from my wife's computer.

    Your library will only be where you put it.  Copy everything from your backup copy of your old computer to the new one.
    You can redownload some itunes purchases in some countries:
    Download past purchases - Apple Support

  • How do I access and use my iTunes library on a different computer?

    How do I access and use my i Tunes library on a different computer?

    The iTunes library is only where the user puts it.  If desired to have on an additional computer, put it there by copying the ENTIRE iTunes folder from the existing computer to the new computer.

  • I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

    I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
    How can I access and use documents and drawings created on the PC based computer ?

    Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier.  See this tip if you must go newer.  Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server.  I'm not sure if the new black Mac Pro supports that configuration or not.
    iPhoto, there is an iPhoto for all versions of Mac OS X.
    iTunes, there is an iTunes for all versions of Mac OS X.  Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature.  Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
    Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
    GIF - Viewing GIFs Apple's Preview can do that.  Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
    DMG is able to be opened by all versions of Mac OS X.  This are just "disk images" which store programs on a virtual disk that will open when double clicked.    Frequently you'll find the installer of the said program inside.  To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
    Otherwise see the resources on:
    https://discussions.apple.com/docs/DOC-2455
    If you end up deciding to stick with Snow Leopard.

  • How do I access and use my main computer over my local network ?

    I have a wireless internet connection that currently runs from the outside antenna into the house via ethernet. My internet provider is setting up a second wireless system so that a computer 1/2 mile away can share the connection. I believe they are going to run the signal from my existing antenna into a router that will connect to the ethernet wire to my house and to an access point that will shoot a signal from a second antenna to my computer 1/2 mile away.
    I'd like to know the best way to access the computer in my house from the one 1/2 mile away.
    I'd like to be able to access and use files on my home computer so that all changes are kept on it. I'd also like to access any e-mail messages that Mail has recieved.
    My ISP said that they would have to enable VPN.
    I'd like to know if enabling file sharing would be enough, or do I need this Vine program I've read about on this forum, or do I need to set my home computer up as a server, or do I need to do something else ?
    I've read about lots of stuff but don't understand any of it very well.
    Any suggestions would be appreciated.
    Thanks
    1.3 Mhz Cube   Mac OS X (10.4.9)  

    But why pay for a solution. You can do the same thing with "Share My Desktop" and "Chicken of the VNC".

  • How can I access and use the alphabetical keyboard of the phone ?

    How can I access and use the alphabetical keyboard of the phone ? I cannot find the answer in the manual of use.  Thanks for your help !

    Recently I was abroad and tried to contact my voicemail to check my messages. I was asked to enter a password and did not know how to use the letters below the figures on the keyboard.  I had to give up and wait until I was back in my country (no password is then needed).

  • Does my macbook air have a built in virus scan?  how can I access and use it? also any recommendations of what software if this is not avail ?

    does my macbook air have a built in virus scan?  how can I access and use it? also any recommendations of what software if this is not avail ?

    Contrary to what Geeks on Hugs is telling you, Mac OS X does indeed have a basic malware scanner. It is not a feature that is directly accessible to the user, and works a bit differently than every other malware scanner out there. Gatekeeper, which has been mentioned here, is entirely separate, and provides a different method for helping to protect you against malware.
    The anti-malware scanner in Mac OS X is called XProtect. When you download an application (or any other kind of executable code), it is automatically "quarantined," so that when you open it you're asked if you really want to do that. I'm sure you're very familiar with this aspect of Mac OS X if you have ever downloaded any apps from outside the App Store. What you don't know, though, is that each time you try to open a new app, that app is checked by XProtect. If it is identified as malware, you will not be allowed to open it, and will be warned that it's malware.
    At this time, there is no known malware that can infect a properly up-to-date Mac. All current malware will be blocked by one or more methods.
    For more information, see my Mac Malware Guide.
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com.)

  • Provide correct link to download and use my product, Adobe Acrobat XI Pro Student and Teacher Edition (Windows, English)

    Please provide correct link to download and use my product, Adobe Acrobat XI Pro Student and Teacher Edition (Windows, English)

    If you want instant replies, you need to Contact Customer Care.
    If you post here in the user forum, you have to wait until someone sees your post (and knows the answer).
    Anyway: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

    Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

    I was searching for how to setup the 903+ and my W520 and came to this thread.
    1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
    but if you are going to go BT headset....
    2.  What I did for the 903+
    Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
    Required reboot.
    Activated the Bluetooth with FN + F5 menu.
    Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
    Ran the updated Bluetooth driver install.
    Rebooted for good measure.
    Double-clicked the Bluetooth Tray icon.
    Clicked Add A Device.
    Turned off my 903+ and continued to hold down the power to enable pairing mode.
    Showed up in devices and added it.
    Worked for audio. There are probably additional options for enabling the mic.
    Hope that helps whoever might find this thread.

  • How do I access and use my iTunes gift card balance

    How do I access and use my iTunes gift card balance

    You redeem your gift card to your iTunes account.
    Then you make iTunes purchases and the amount is deducted from your account.
    See this -> iTunes 11 for Mac: Redeem an iTunes allowance, gift certificate, or Gift Card

  • Will Remote Desktop allow me to access and use my Mac Pro 2009 from my MacBook Pro 2011?

    Own a small business, have two locations, I need to use Windows via Parallels on my Mac Pro 2009, but I am forced to spend most of my time at the other location which has a MacBook Pro 2011. Will Remote Desktop allow me to use the MacBook Pro 2011 to access the Mac Pro and use Windows via Parallels?

    If all you need is to be able to control another computer, then ARD would be overkill. If the systems have Mac OS X 10.5 or later you can use the Screen Sharing built into those versions of Mac OS X to control the system.
    Another and perhaps easier option is to use a service such as LogMeIn or TeamViewer. Either option may be significantly easier than dealing with screen sharing or ARD. 
    You'll want to confirm that any solution you choose will work with Parallels, of course. I haven't tried remote control of a system to use Parallals, so there may be special considerations there. If you don't get useful comments here, you might try Parallels' forums.
    Regards.

  • How do I access and use an extension while in photoshop?

    I just installed extension manager CC and BlendmeIn. How do I access and search this extension while designing in photoshop CC? *When I go to Window>extensions it is not there.
    Thank you!!
    Kate

    But why pay for a solution. You can do the same thing with "Share My Desktop" and "Chicken of the VNC".

  • How do I Install And Use Plugins

    I have a plugin I had made for acrobat 9.4. Recently I upgraded my Acrobat to 10.5. Docs that i have read say the plugin should work in 10.5. I dropped the plugin   here    C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\plug_ins.   but It does not appear in any of the tools
    Can any one tell me if a plugin from 9.4 will work in 10.5  and how do I install it and where does it show up?
    Thanks for the help

    The Advanced menu item was removed by Adobe in Acrobat X. Don't know what a plug-in would do. It probably needs an update.
    It's very optimistic to think a plug-in written for one version of Acrobat will run without issues in a future version. The issues aren't usually big, but there's more often something than not.

Maybe you are looking for