Accessing and using the Clipboard

It is very seldom that I need to use the Clipboard, so I never can remember how to accesss it on the rare occasions that it is useful. I FINALLY found it today, but I don't want to have to go through this again, Therefore, I have two qustions:
(1) Is there a way to put it in FAVORITES? If so, how?
(2) There is now a link in my Clipboard that I want to send as an E-mail attachment. Unfortunately, I can't copy it. How to I remove/copy something on my Clipboard?

Similar Messages

How can I access and use the alphabetical keyboard of the phone ?

How can I access and use the alphabetical keyboard of the phone ? I cannot find the answer in the manual of use. Thanks for your help !

Recently I was abroad and tried to contact my voicemail to check my messages. I was asked to enter a password and did not know how to use the letters below the figures on the keyboard. I had to give up and wait until I was back in my country (no password is then needed).

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

I can access and use the store just fine - but when I try to open iTunes HELP, I just get a blank/white Help box. Any thoughts or ideas? Dee

Not sure if I have to repeat question, but I cannot access the iTunes HELP from the Store on my PC (Dell laptop/Windows 7) - opens the box, but it remains blank/white, never fills in with HELP information. Any thoughts? dee

I would check with HP. Your scanner may need a firmware update and updated HP software. Start here:
http://www8.hp.com/us/en/hp-search/search-results.html?qt=LaserJet+m1217nfw+MFP& cc=us&lang=en&charset=utf-8&qp=&hpn=&hpa=&hps=&hpr=&cat=&current_url=CSSres
then here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4075472

HT5085 I bought a new computer. I backed up my old computer and put my itunes library on an external hard drive, that I then uploaded to the new computer. However, how do I access my Itunes account and use the $25.00 or so credit that Ihave and purchase

I bought a new computer, I backed up my itunes library on an external hard drive from the old computer. I then uploaded the external hardrive to my new comupeter Windows 8 - How do I access my apple store account to purchase additional music and use the $25 or so dollars I have in credit. ?
Thanks - Patti

You should be able to log into your account via the Store > Sign In menu option - if the drop-down menus aren't showing the control-B should them to show.
Your balance should be accessible wherever you are signed into the account. My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option (that option will only show after you've signed in).

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

Glad you found the answer. But something seems wrong. FCP should be able to assign the scratch disk to your startup drive. It's not advisable, but it should be possible. You might want to try and figure out what's going on before what ever's going on cause other problems.

I recently converted from my Blackberry Torch to the Z10. I travel a lot and use the VZ Access manager through my Torch. Can I do the same thing through my new Z10? I don't see that as an option on the software sight.

I recently converted from my Blackberry Torch to the Z10. I travel a lot and use the VZ Access manager through my Torch. Can I do the same thing through my new Z10? I don't see that as an option on the software sight.

Hi Atepastt,
Congrats on your new Z10! I know having the right features is important. The Z10 uses Blackberry link software. The device uses the mobile hotspot feature to non-cord tether the device. The mobile hotspot feature is an additional cost. You can add this feature online http://vz.to/1di2TlT .
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Can i access my account and use the programs on another computer?

can i access my account and use the programs on another computer? i would like to be able to use both my laptop and my desktop

yes, you are allowed concurrent installations and activations on, up to, two computers.
by signing out of one, you can activate on a third etc.

I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto. but i cannot update it and or access my photos. Help. thanks.

I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto. but in update, it says i have no updates. i dont even remember making changes in iphoto.Help. thanks.

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2

How to backup files to ensure future access and use using a different mac

I recently attempted access backed up data on my LaCie drive from a different Mac notebook. I was blocked. I didn't write down the message, but it essentially advised that the data was locked and I wasn't allowed access. I wasn't given a chance to enter any kind of system password to bypass the lock.
Here is my problem: I recently spilled some wine into my keyboard. Since then, the system has slowed to a crawl and occasionally weird things begin to happen, regardless of which software I am using [eg iPhoto, Quickbooks, idvd, Photoshop, email, and even dashboard]. I know I am very lucky to have any access to my files at all. While I do, I need to back everything up so that I can have access to my files later on. I plan to have my Mac serviced this week. I don't know if it needs to be replaced, or whether it can be repaired.
*+If it can't be repaired, how do I back up my files to ensure future access and use using a different mac?+*

I'll check the example you linked. I appreciate you responding.
I was not trying to boot another system at all. Actually, I was working on a newer mac laptop. I attempted to load a dvd I had created in my idvd on the other mac from the LaCie. I was using a mac because I knew it had all the iLife software I needed in order to work with my idvd components. Honestly though, I don't know if the mac I was using is intel based. I hadn't considered it. Does Apple sell macbooks with intel? No matter.
So, let's see -- I was using the other powerbook to read the LaCie via firewire -- and yes, the LaCie has its own power supply.
If I remember correctly, the denial I received [when attempting to load the idvd file] knew that I had created it. I got the feeling that it wasn't allowing me into the file for security reasons. I just don't remember setting security. Incidentally, I just checked and I do not have a master password set nor do I have FileVault protection turned on.
I'll check that link you sent. Thx again, M~

How do I access and use my Itunes library from a different/new computer?

How do I access and use my Itunes library from a different/new computer? My computer is no longer working, so I need to be able to access my library from my wife's computer.

Your library will only be where you put it. Copy everything from your backup copy of your old computer to the new one.
You can redownload some itunes purchases in some countries:
Download past purchases - Apple Support

How do I access and use my iTunes library on a different computer?

How do I access and use my i Tunes library on a different computer?

The iTunes library is only where the user puts it. If desired to have on an additional computer, put it there by copying the ENTIRE iTunes folder from the existing computer to the new computer.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

Accessing and using the Clipboard

Similar Messages

Maybe you are looking for