Accessing Blackberry synched data through a desktop PC

Prior to having my Blackberry Storm 9530, I had a regular cellphone and a Palm Pilot.  One useful feature of the Palm software was that I could access the synched data (contact information, calendar, etc) on my desktop.  While I know how to use the Storm as an extra hard drive, thereby accessing photos and documents, I have not discovered any way to access my calendar, memo pad or contacts.  
Does anyone know how to do this?   Is there a 3rd party software that will do it, if Desktop Manager won't?  I am concerned about the device crashing.  I may not want to buy another Blackberry device after this one, don't really know yet.  But I want to be able to view my data.
Can anyone help me?

Hi and Welcome to the Forums!
Contrary to how others do things, RIM does not provide a desktop PIM. Others force you to use their PIM and only their PIM. RIM provides a conduit software that functions as a bridge between your chosen PIM and the BB. See this KB for compatible PIM's:
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
You can configure the BB to sync with the PIM:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Access SharePoint Online Data through code/powershell

    Hi All,<o:p></o:p>
    I need to access SharePoint Online site to upload documents from local machine to the doc libraries on the site.. (100s of docs)
    I am trying to see if I can use PowerShell script for this..  However, I see that SharePoint Online Management Shell cmdlets are not robust enough to do such operations..  Is there a way I can use CSOM / .net console app / any other way.. I am drawing
    blank here.. L<o:p></o:p>
    Any help is much appreciated.<o:p></o:p>
    Charan

    You can start from here
    http://blogs.technet.com/b/fromthefield/archive/2014/02/19/office365-script-to-upload-files-to-a-document-library-using-csom.aspx
    Regards Chen V [MCTS SharePoint 2010]

  • How to access archived data through queries

    Hi,
    I would like to know if there is any way to access the archived data through SAP query. I don`t have any infostructure for this archived data.

    You mean mails once present and readable on the iPad, but no longer there (in the, by default, 50-long mail list)?

  • Creating/Accessing Blackberry Calendar on desktop computer

    Hello Blackberry Community
    I have just migrated from Palm PDA to a Blackberry 8830. I appear to have tranferred all my Palm data (addresses, calendar etc) to the Blackberry.  My question is---Palm software allows users to sync and access all the PDA info via desktop and customize sync operations.  Does Blackberry/Verizon or another outside appolication have a similar software program to allow me to get into the addresses, calendar etc via a desktop program?   Running WIndxp home.
    Also, I noticed in the transfer that birthday dates didn't transfer over.  Guess not all of the fields are paralell and some will have to be re-entered manually.
    Thanks so much for your help.  I fell like a newbie all over again   ;-{
    Solved!
    Go to Solution.

    BlackBerry doesn't have its own desktop software (for database, Memopad, Calendar, etc.) - you have to depend on something like Outlook. BB's desktop will let you backup your device, instruct your 8830 to sync w/ Outlook, Install additional programs, etc
    Phil

  • Accessing Password Keeper Data using Desktop Software

    I recently had a pressure crack to the LCD on my Curve 8310.
    I need to access my stored passwords in Password Keeper, however since the LCD is toast, can't read anything on the phone.
    I'm waiting on a replacement LCD, but need Password, ASAP.
    Is there any programs to view the program on the pc?
    Solved!
    Go to Solution.

    I tried a solution which did actuall work, so I figured I would post in case anyone else has this same problem.
    I had previously backed up the data from my Blackberry Curve 8310 using the Desktop Management Software.
    I downloaded a Simulatr for my Curve 8310 and installed the software.  I found the simulator at BlackBerry Smartphone Simulators - URL
    http://na.blackberry.com/eng/developers/resources/simulators.jsp
    Once the program was installed I ran the program, which brings up an image of the phone.
    I started my Desktop Management Software.
    Now back in the Smartphone Simulator
    In the menu, I selected "USB Cable Connected" which simulates connecting the smartphone.
    Once I did this, the Desktop Management Software prompted me to create settings for then new phone.
    Once I set up this new Virtual Phone, I Restored my backup from the Desktop Management Software to the New Virtual Phone.
    I could then use the mouse to go to the Password Keeper and open the program.  It prompted me for my password and all of the data appeared.
    Hope this helps someone else.  Good Luck.
    Mark

  • How do I access session data through an EJB?

    Hi
    How do I access session data through an EJB?
    I am currantly developing a Web service (using ejb's, JBoss.net and Apache Axis). A client making a call to this Web service, is expecting a bussiness-object in return. My problem is that this bussiness-object i stored in a users session data. How do I retrieve this bussiness-object from the users session.
    I have read that this does not work with httpsessions, is this true? If this is true, is it possible to store the bussiness object in a JavaBean e.g:
    <jsp:useBean id="userContextWebImpl" scope="session" class="com.ac.march.client.UserContextWebImpl">
    <%
    String key = "test";
    String value = "This is the value";
    userContextWebImpl.setValue( key, value1 );
    %>
    </jsp:useBean>
    and then retrieve this information through the EJB? Or is it possible to do this by using Statfull JavaBeans? Or can this be done through a nother solution?
    Please help!

    I have created a JavaBean with scope="application" to store some data. The data is stored when a user prefomes a spesific task.
    A different person then makes a call to a Web-Service on the server. The Web-Service then asks an EJB to retrieve the data stored in the JavaBean (servlet cotext). In other words: How do I retrieve this data from the EJB?
    I have tried with this code, but with no luck.
    (ApplicationContextWebImpl is the JavaBean)
    public static String getBookingResult( String key )
         String myResult = null;
         String myKey = key;
         ApplicationContextWebImpl applicationContextWebImpl = null;
         try
              applicationContextWebImpl = new ApplicationContextWebImpl();
              myResult = (String)applicationContextWebImpl.getValue( key );
         catch ( java.rmi.RemoteException e )
         return myResult;
    }

  • How to enable users to access windows 2012 through remote desktop client on windows XP SP3

    Hi I have just installed Windows Server 2012 and trying to give access to the users. The users are on windows XP Pro SP3 remote desktop client (Shell and control version 6.1.7600 with Remote Desktop Protocol 7.0 support). 
    I have enabled the windows server 2012 remote desktop users through "control panel -> systems and security ->  Remote access" for the users. When I try to connect to the windows server as administrator, it is getting connected.
    But when I try to connect as other users I get the following message.
    "To sign in remotely, you need the right to sign in through Remote Desktop Services. By default members of the Administrators group have this right. If the group you're in does not have the right, or  if the right has been removed from the Administrators
    group, you need to be granted the right manually."
    Is there any other setting to be done to eanble the Remote Desktop for the users.

    Hi I have just installed Windows Server 2012 and trying to give access to the users. The users are on windows XP Pro SP3 remote desktop client (Shell and control version 6.1.7600 with Remote Desktop Protocol 7.0 support). 
    I have enabled the windows server 2012 remote desktop users through "control panel -> systems and security ->  Remote access" for the users. When I try to connect to the windows server as administrator, it is getting connected.
    But when I try to connect as other users I get the following message.
    "To sign in remotely, you need the right to sign in through Remote Desktop Services. By default members of the Administrators group have this right. If the group you're in does not have the right, or  if the right has been removed from the Administrators
    group, you need to be granted the right manually."
    Is there any other setting to be done to eanble the Remote Desktop for the users.
    Have you tried adding those users to the "Remote Desktop Users" group? It's in Active Directory Users and Computers and it's a Built-In group. Might want to give that a try ...
    - JJ

  • Is there a way to have internet access for my laptop through Verizon?  I have a smartphone, but I don't want to rack up too much data.

    Is there a way to have internet access for my laptop through Verizon?  I have a smartphone, but I don't want to rack up too much data.  How would the laptop connect to the  4G? network?  Thanks for any info:)

    Rcshnoor nailed it, everything will depend on how they manage their data connection once the laptop is connected.  It is perfectly feasible that they will have no issues with this new connection.  However, there is nothing stopping the user from going above and beyond the data usage cap currently sufficient for the phone by itself.  We cannot presume that any estimations on new usage will be accurate either.
    Users should always be aware of the reality that revolves around data usage and the devices that consume them.  Its no different than installing a 2nd waterline/hose on your house.  Sure the hose will be fine if you remember to turn it off when you are done, but no one is going to stop you from letting it run all night if you forget.

  • Error in accessing data through external table

    Hi,
    I am getting the following error while trying to view data through external table,
    ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-04062: no data source specified
    ORA-06512: at "SYS.ORACLE_LOADER", line 19
    according to this error "KUP-04062: no data source specified", location should be specified and i have specified the location as
    LOCATION (<diectory_name>:' '),
    then also it is giving the same error.
    Please Help!

    I am also got the same error when retrieving the data from external table.
    I resolve this problem, like this:
    1. I imported the flat file(.csv) into repository.
    2. Map that flat file fields to database table cols.
    3. Deployed the mapping using controlcenter, and run the mapping.
    4. if it fails there, i loaded the flatfile data through the command prompt using "sqlldr" statement and control file is our mapping control file.
    5 Then it loaded data into database table sucessfully.
    Thanks.

  • How can I accessing my old IIgs through PB G4??

    I want to access my old IIgs by connecting it with a firwire cable to my PB. I accomplished this once and the IIgs hard drive icon showed up on my PB desktop. I was able to run programs on the IIgs through my PB. Now I cannot remember how I did it although I believe it involved the C key...
    I want to access an old program that ran on classic 9 - contained on the IIgs, and also use it as external storage.

    to be more precise
    I have saved all my datas of my old iphone on itunes and icloud. I got a new phone 4s that I connected to itunes in order to load it and sync with my old datas. but I don't konw how but when itunes sync my new iphone i did not take my old datas. at the end of the sync process, I got an iphone totally virgin, but none of my previous apps, neither contact neither calendar neither anything. what happened? did itunes erased all my previous datas?? i hope not but if it's the case, can I recuperate my old datas through icloud? please help because as a lot of us, all my life is in this iphone.. (contacts, photos of my 18months girl, etc etc)
    thank you very much

  • 8830 Calendar Synch Issue/Vista 2007/Desktop Mgr v5.0.1

    I use Vista 2007; I have 5 e-mail accounts on my 8830 - none are linked to Microsoft Outlook.  Somehow, my calendar on Outlook  is using an e-mail address that is not the set default on the 8830 to synch (I had to list one e-mail as a default on the 8830's General Options) and so when I open an appt. syched from Outlook on the 8830 it shows the secondary address and I can't change it to the set default.  When I create a calendar entry on the 8830, it shows the default e-mail but then it doesn't synch to the Outlook (unless I list the secondary e-mail).  I have not been able to figure out how to fix this. Whenever I synch to Desktop Mgr v5.0.1 it synchs off of the secondary e-mail address.  Any ideas on how to fix this?  I've had this unit for years and this is the first major issue I've encountered.  This has not affected my notes/tasks/contacts/memo sections, which is a good thing.    Thank you!
    Solved!
    Go to Solution.

    My unit is fixed - here's how we did it (thanks Verizon):
    1.  Back up data via Blackberry Desktop Manager
    2.  Under Options, Advanced Options, Default Services: Delete all the e-mail associated Calendars (CICM extensions, if I recall correctly).  I only used Microsoft Outlook - not connected with an e-mail so this was just getting rid of the non-use calendars.
    3.  Wipe 8830
    4.  Restore the 8830 using the back up data file via Desktop Manager (note, this created duplicate entries again, because the unit took out the associated e-mails on the entries, and thus now I had one Outlook calendar on the 8830 with merged/duplicated entries from before - everything else synched fine).
    5.  On Desktop Manager, go to Back-Up/Restore Advanced options, and move the Calendar-ALL database over to the left hand side box called FILE (to create a back up file just for that)
    6.  On the right hand side, clear the Calendar-ALL database (the one from the 8830)
    6.  Go back to Synchronization, then set calendar synchronization this first time to go from Outlook-Device (change to dual synch later).
    5.   I did a full/regular synch and that solved the problem.

  • Can't load data through smart view (ad hoc analysis)

    Hi,
    There is EPM application where I want to give ability to planners to load data through smart view (ad hoc analysis). In Shared Services there are four options in
    EssbaseCluster-1: Administrator, Create/Delete Application, Server Access, Provisioning Manager. Only Administrator can submit data in smart view (ad-hoc analysis). But I don't want to grant Essbase administrator to planners, I'm just interested to give them ability to load data through ad-hoc analysis. Please suggest!

    I take that you refreshed the Planning security, If not refresh the security of those users. Managing Security Filters
    Check in EAS whether those filters are created with "Write" permissions.
    Regards
    Celvin
    http://www.orahyplabs.com

  • How can I set a third party application to access my organizations intranet through my organizations network

    how can I set a third party application to access my organizations intranet through my organizations network  . I am using blackberry bold 9700 OS 6

    Hi deepajithesh
    This feature is not available. Applications access the BlackBerry Network using the connection to BIS.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Access to Palm data after re-creation of user ID in Win XP Pro

    Hi,
    I am using Win XP Pro on my laptop. I had installed Palm Desktop under my user id e.g "ajitshah". Due to  problem with user profile not functioning correctly, my administrator recreated user profile "ajitshah".
    Now I am able to access all other programs except Palm - unable to access palm desktop or carry out Hotsync operations. Is there any ways to access my Palm data and carryout Hot Sync operations?
    Thanks for your help.
    Kind regards,
    Ajit Shah
    Post relates to: Tungsten E

    Your question is not stated in a way that is easily answered. I suggest you contact Palm support via chat: www.palm.com/chat - the service runs 24/7

  • Upload excel sheet data through sqlloader into oracle tables

    hi everyone,
    i am working with excel sheet with following records
    8501      Jacob Marshall      15000      21/10/2009      Finance
    8502      Chris Campell      50000      13/06/2008      R&D
    8503      Simon Dough      50000      3/07/2008      Engineering
    8504      Mark Haggai      75000      9/3/2006      Product Management
    8505      Verica Beverley      45000      7/2/2008      HR
    and i saved it in emp_details.csv
    after that when i write following code to make control file
    load data
    infile 'C:\Documents and Settings\prashant_dabral\Desktop\a.txt'
    into table tmp
    field terminated by','optionally enclosed by" "
    (emp_no,emp_name,salary,doj,dept_name)
    after this pl\sqldev returning me error message that ORA-00900:invalid sql statement
    can anybody tell me how to resolve issue
    or
    another method to Upload excel sheet data through sqlloader into oracle tables

    A control file is a file located on the operating system, not some SQL or PL/SQL code you try and execute.
    Create the control file as a file and then use that to load your data with SQL*Loader from the command line.
    http://www.morganslibrary.org/reference/sqlloader.html
    Or better still, create it as an external table and then you don't need a seperate control file or need to use sql loader from the command line...
    http://www.morganslibrary.org/reference/externaltab.html

Maybe you are looking for