Accessing BW in netweaver 2004s issue
Accessing BW in netweaver 2004s issue
Hi
I logged into Sap (sneak preview installed locally) via client 001 ( in order to work on BW) & user= SAP*
When I try to create a new class with transaction se24
I get the following message "No changes for user SAP* allowed"
Can anyone help me on this issue ?
How can extend right to that user in order not to be blocked.
Thanks in adance
Kadiga
Hi Kadiga,
You can post in the SAP NetWeaver2004s Ramp-Up forum of BI. Here is the link:
/community [original link is broken]
Bye
Dinesh
Similar Messages
-
Access key for NetWeaver 2004s trial version
Hi,
I've installed the trial version of SAP NetWeaver 2004s. When I try to create a new function module, it asks for the access key. How and where can I get the access key for the trial version?
Please help.
Thanks
Raam...Hi:
Apparently the developer license is for the user id "bcuser". You should work under that user id.
From http://www.sap.com/platform/netweaver/minisap.epx :
"...you will also need a developer key when you try to change a repository object in the workbench. Enter: 29671482393151224771".
Thanks for any additional points you choose to assign (...the more the better
Best Regards -
Ron Silberstein
SAP -
Access to SAP Netweaver 2004s --- ECC 6.0
Good evening....
The question is: Must I install the java engine in my sap ECC 6.0 to access via web to SAP or isn't necessary ???
I've read in the marketplace and I think isn't necessary but I need to be sure.
I'll can access via web (internet explorer) to my SAP without install the java engine ???if using SAPGUI through the internet, you do not heed JAVA.
if you want to go through a browser, I cannot say. -
Securing Netweaver 2004s Portal
Hello everyone,
I'm trying to realize secure access to a NetWeaver 2004s Enterprise Portal. Does anyone know an easy way to achieve this? I can just disable the http port in the visual administrator, unfortunately the message server does recognize this but does not forward requests to the SSL port. Second issue is trex: configuring trex for ssl is a rather huge task, but once the http port is disabled there seems to be no choice but configuring trex for ssl also. Third question regards the webdispatcher: how am I able to configure it to connect to the message server (which uses ssl then) properly?
Hope someone can help, it should not be THAT hard to get a system secure should it?
Kind regards,
HendrikHere is the link for the Portal Security guide.
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/cdc640c1b2cc38e10000000a155106/frameset.htm -
BEX Front end issues in sap netweaver 2004s
We have problems with accessing SAP NETWEAVER 2004S BEX tools(BI7.0).
We have the following softwares installed:
SAP_BW SAP NETWEAVER BI7.0 SP 10(SAPKW70010)
SAPGUI6.40 PATCH LEVEL 22
Microsoft office 2003
.NET version 1.1
Microsoft VJ# 1.1 Distributable package
We are having the following issues in each components:
1.BEX ANALYZER:Unable to open the reports.Getting the error message that
"Critical error occured.Program needs to be closed.Refer the trace file"
2.Report Designer:component Bex Report Designer avilable verion 59, Version 132 required.Before you can continue you have to run the front-end setup"
3.BEX WAD:Unable to save any web templates.Getting the following error message.
"E002 Error While Executing Service RSWAD_WEBPUB_CALL_SERVICE:V for object 1()"
In BI front end check tool for PC not showing any red files.But it showing Blue color for some of the microsoft dll's.
Please help us with your inputs..
thanks in advance
SoujanyaHi Soujanya,
This is known issue in BEx tools in this latest release.
We got the same problem and still facing.
We are using BEx 3.5X to access all reports.
Install BEx 3.5 too. Then you get two sub menus to access BEX tools.
Make sure that you open reports in 3.5 BEx Analyser.
I think all reports, which you tried to open in BEx(BI 7.0) are corrupted. try to copy to your datatargets/install (if they are BI Content Reports).
Good Luck,
Anand.
Pls give points if this is useful -
Error while trying to access RSA1 in SAP NETWEAVER 2004 S
HI friends,
i am working on SAP NETWEAVER 2004s and have created a few open hub destinations in this and when i tried to delete a few , system is showing an error " Destination Type is not Supported" when ever i am trying to access RSA1 .
i will be glad if you could let me know how to overcome this,
thanks and regards,
sasdihar gunturu
points will be awarded***Hi Gunturu,
Do you know what sp level are you working with ?
Here you´ll find a detail of sp level and his corrections, see the 22 page. Maybe that help you.
https://websmp207.sap-ag.de/~sapidb/011000358700004483762006E
Regards,
Natalia. -
Installed Netweaver 2004s SP7 but cannot access any tools
I have successfully Installed Netweaver 2004s SP7 Java version but cannot access any of the tool sets. When I try the URL's localhost:50100/irj or localhost:50100/caf it takes me to the initial screen. When I click on any of the tabs (example: Guided Procedures followed by Design time) everything is blank. If I type the URL localhost:50100/webdynpro/dispatcher/sap.com/cafeugpuidt/AppWorkset it takes me to the design time but when I click on anything to create actions or processes, I get the error message "The Web Dynpro 'AppWorkset' Application has expired. Restart the application with refresh button or the following link AppWorkset"
My goal is to play with Guided Procedures. Is EP the only way to access design time and runtime or are there other ways?Yeah well that sounds like DNS problems so I suggest you change your DNS settings to use Google DNS servers at 8.8.8.8 and 8.8.4.4
If you found this post helpful, please click on the star on the left
If not, I'll try again -
Display access in Netweaver 2004s
Hi all
How do i give display access to user for Tcode SXMB_MONI and SXMB_IFR in Netweaver 2004s
ThanksHi Jacko,
For transaction SXMB_MONI you have:
- <i>S_XMB_ADM</i>. The authorization object Integration Engine Administrator, determines the global administrator for the monitoring and administration of the Integration Engine. The field can have the following contents:
X (The user is the administrator and can access XML messages in all clients in the system)
Empty (User is not the administrator and can only access XML messages in the current client)
-<i>S_XMB_AUTH</i>. This provides authorization protection for all actions that affect configuration, administration, monitoring, runtime, the cache, and time-controlled and prioritized message processing.
Activity (Activity executed in the area: change 02, display 03, execute 16, activate/deactivate 63, reorganize 65).
Area for Integration Engine (CACHE, CONFIG, FILTER,...and so on).
- <i>S_XMB_MONI</i>. The authorization object XI: Monitoring of XML Messages is used during monitoring of the XML messages that are processed by the Integration Engine and saved in the database. In particular, this includes the transaction Integration Engine Monitoring (Monitor for Processed XML Messages) and the message monitoring in the Runtime Workbench.
Activity (you must fill with 03 - Display).
You can not give display access to transactio SXMB_IFR because this tcode let to user open the folder X:\Documents and Settings\<current user>\SapWorkDir.
I hope helps you.
Regards, Leandro -
Issue with common system files for Sneak Preview SAP NetWeaver 2004
Hello,
I am trying to install Sneak Preview SAP NetWeaver 2004 and 7.0 - Full Java Edition with SAP NetWeaver Portal onto my machine.
On the third step of installation-- install common system files-- I am getting the some error messages and the installation was stopped. Can anyone kindly provide some assistance?
THANK YOU in advanced.
Errors:
INFO[E] 2007-09-10 00:18:17 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:18:18 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:18:18 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:23 [iaxxgenimp.cpp:779]
showDialog()
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
INFO 2007-09-10 00:24:23
CJSlibModule::writeInfo_impl()
Setting ACL of registry entries for SAP system J2E...
INFO[E] 2007-09-10 00:24:32 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:24:32 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:24:32 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:46 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
Exit status of child: 1I am not sure if this helps, but SAP_J2E_LocalAdmin exists in my system as a group not user.
-
SAP NetWeaver 2004s SR 1 SP9 INSTALL
I spent last week trying to install SAP Netweaver 2004s SR 1 SP9 in XP SP2 with no success.
The JDK version is 1.4.2_09 and the install process fail in step "Import Java Dump", the <i>sapinst.log</i> indicates the error:
14-dic-2007 11:55:30 com.sap.inst.jload.Jload dbImport
GRAVE: <b>DB Error during import of J2EE_CONFIGENTRY</b>
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: Message: Cannot assign NULL to host variable 2. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO J2EE_CONFIGENTRY( CID , NAMEHASH , ISFILE , NAME , DTYPE , VBIGINT , VDOUBLE , VSTR , VBYTES , FBLOB ) VALUES ( ? , ? , ? , ? , ? , ? , ? , ? , ? , ? )".
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: SQLState: SAP06
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: ErrorCode: 1001142
14-dic-2007 11:55:31 com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
ERROR 2007-12-14 11:55:31
CJS-30049 Execution of JLoad tool 'C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:\Archivos de programa\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\install\sltools\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib/iaik_jce.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/jload.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/antlr.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/exception.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/jddi.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/logging.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/offlineconfiguration.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/opensqlsta.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/tc_sec_secstorefs.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar" -sec J2E,jdbc/pool/J2E,
MX3506DC0976/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
MX3506DC0976/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/Programas/SAPNW2004sJavaSP9_Trial/SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\../Sneak_Preview_Content\JAVA\JDMP -job "C:\Archivos de programa\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/jload.java.log' for more information.
ERROR 2007-12-14 11:55:31
FCO-00011 The step importJavaDump with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
INFO 2007-12-14 11:55:38
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump".
I have read many posts in many forums and there are some posts about the same problem of the table J2EE_CONFIGENTRY, but never clear answers (or answers for Linux OS). I really appreciate any help about it.
PD: No, it's not the timezone configuration (I have GMT+1 and daylight saving enabled).Hi Friends!
This is Anand Here
I am totally new to SAP
I was trying to install SAP on 2003Server
while installing the ABAP System-Central Instance
I Got this error message
An error occurred during the installation of component SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation. Press the log View Button to get extended error information or press OK to terminate the installation. Log Files are written to SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation
The following error occured and the installation could not proceed
ERROR 2007-12-27 20:33:33
- FSL-00001 System Call Failed. Error 5 (Access is denied.) in execution of system call 'FindFirstVolumeMountPoint' with parameter (
?\Volume{c682cb5b-b31d-11dc-be09-806e6f6e6963}\), line (77) in file (synxcfsmit.cpp).
ERROR 2007-12-27 20:33:33
MOS-01235 Module function getInfo of module CIa0sMount Failed,
Can Somebody help me with this -
Problem with ejbs in Netweaver 2004s-Class not found exception
Hello,
I have a webdynpro project(Newtweaver 2004s) referring to a stateless session bean. I created an ejb and defined two public parts - part 1 contains EJB components and part 2 contains some Exception classes I refer to in my webdynpro project. I added these parts to my webdynpro project as dependencies for compile and runtime. I am able to compile and deploy the webdynpro project without any issue but I get runtime errors saying the following:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for component com.test.techops.ccf.data.Data. (Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)
at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:51)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:382)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:707)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:174)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:74)
... 27 more
Caused by: java.lang.NoClassDefFoundError: com/test/techops/ccfejb/util/CCFException --> Defined in my ejb (public part)
at com.test.techops.ccf.data.wdp.InternalData.<init>(InternalData.java:240)
... 32 more
I did not have any issues when the code was running on Netweaver 2004 but now it does not seem to work when I migrated to 2004s. Can anyone please advice me on what the problem might be ?
Thanks,
RamaHi Harsha,
Thanks for your quick reply.
Trying to figure it out by comparing JRE versions but still no result. I have found one problem is that
when Gantt is loaded , Java in control panel loads all the Applets requried in to its Resources.
These Resources are missing for the user for whom the Gantt error is produced.
Loaded Resources can be found in the below Path :
ControlPanel -> Java-> General Tab -> View Button -> select Resources in Show .
So, How to load these resources ??? . Is there any setting to do that ???
Regards,
Ravikiran.K -
Netweaver 2004s SR3 PI 7.0 Installation Error
Hi All,
I am installing Netweaver 2004s SR3 PI 7.0 on Sun Solaris 10 and Oracle 10g, all the components are 64bit version.
During the installation step 95 out of 98 prepare to install minimal configuration ended with error. please find here the below error
ERROR 2008-10-29 20:26:23.2
FCO-00011 The step callOfflineCTC with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|callOfflineCTC was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: in
function NW_Call_Offline_CTC_ind_ind_ind_ind_SubComponentContainer_callOfflineCTC() {
var nw = NWInstall.getSystem(context.get("sid"));
var ctcDirFs = nw.getCI().getInstanceDir().concat("j2ee", "ctc");
var ctcExeFile = installer.onWindows() ? "LaunchOfflinectc.bat" : "LaunchOfflinectc.sh";
var ctcCall = ctcDirFs.concat(ctcExeFile);
installer.writeTrace("CTC is in" + ctcCall);
ASSERT(arguments.callee, ctcCall.isExisting(), "CTC executable cannot be found in " + ctcCall.toString());
var pmgt = new ProcessMgt();
var app = pmgt.createChildApplication(ctcCall, []);
var userData = nw.getUsers().getAccountData(NWUsers.roles.SIDAdm);
var user = (new AccountMgt()).getUser(userData.name);
var env = pmgt.getProcessEnvironment();
if (installer.onUnix()) {
env.setUser(user);
env.setWorkingDirectory(ctcDirFs.getNode());
env.setEnvironmentVariable(new Property("JAVA_HOME", nw.getJavaHome().toString()));
installer.writeTrace("For the Offline CTC Call, JAVA_HOME is set to " + env.getEnvironmentVariable("JAVA_HOME"));
app.setEnvironment(env);
var retval = app.run([], true);
ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);
installer.writeTrace("CTC has been called in Offline Mode.");
CTC retval is not 0 but 255.).
I applied the sap note:1094628 - Error in step Call OfflineCTC from SAPInst 7.0 SR3 still it was not working.
I am not able to solve the issue please give the proper answer.
Thanks
Srinivasa Rao ArjalaHi ,
Please find here the latest updated logs.
sapinst_dev.log:
-rw-r----- 1 root sapinst 2992708 Oct 30 16:36 stepLogMessages.88.xml
-rw-r----- 1 root sapinst 1546114 Oct 30 16:58 LaunchOfflinectc.sh.log
drwxrwxrwx 10 root sapinst 21504 Oct 30 16:59 .
-rw-r----- 1 root sapinst 2992673 Oct 30 16:59 stepLogMessages.xml
-rwxrwxrwx 1 root sapinst 46729 Oct 30 16:59 stepKeydbClient.dmp
-rwxrwxrwx 1 root sapinst 158685 Oct 30 16:59 controllerKdbClient.dmp
-rw-r----- 1 root sapinst 6207660 Oct 30 16:59 sapinst.log
-rw-r----- 1 root sapinst 9603491 Oct 30 16:59 sapinst_dev.log
tail -f sapinst_dev.log
var retval = app.run([], true);
ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);
installer.writeTrace("CTC has been called in Offline Mode.");
CTC retval is not 0 but 255.). You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to /sapinst. </p> </body></html>
TRACE 2008-10-30 16:59:57.572 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
LaunchOfflinectc.sh.log:
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException:The input message is not valid for the Action Controller
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.cul.serviceimpl.process.WriteProfileControllerI mpl:execute97
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:createSystemProperti es538
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:executeWizard141
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:main583
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke0-2
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke39
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: sun.reflect.DelegatingMethodAccessorImpl:invoke25
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: java.lang.reflect.Method:invoke324
Oct 30, 2008 4:58:40 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5 ,main]] Error: com.sap.engine.offline.OfflineToolStart:main81
Thanks
Srinivasa Rao Arjala -
Installing Java add-in Netweaver 2004s SR1
Hello,
I am trying to install a Java Add-in on a newly upgraded Netweaver 2004s SR1 system (upgrade was from NW04). This system is a Unicode ABAP system at the moment.
When running the DB instance installation, it fails with this message:
ERROR XXXX
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'MSSQL@BWZ' NT service).
It looks like it tries to connect to the database instance locally (but it is on another server, so it doesn't exist locally). This is very strange, since it reads all parameters from the profile files without asking for the name of the database server during the parameter input.
Upon creating these services as dummy services, it actually passes these stages, but fails on actual connection to the database that's supposed to be installed.
Has anyone encountered this? Perhaps there's a way to force it into asking which database instance to connect to explicitly?
Thanks,
DanielI'm getting the same error as you. I'm upgrading from CRM 4.0 (6.20 release) to 5.0 (7.00 Netweaver 2004s SR2). My system is Unicode. I'm attempting to install the Java instance as an add-in. For me, the "Central Services Instance (SCS) Java Add-in" phases were successful. I'm also stuck in the "Database Instance Java Add-in" phase. For my installation, I'm stuck in step 11 of 18...which is "Grant database access for account Domain\sidadm". I'm installing the Java instance on the Central Instance server. However, like you the database server (SQL Server 2005) is on a different host. I did the very same steps in our sandbox system and was successful. The only difference, my sandbox system Central instance and database were on the SAME server.
I've opened a ticket with SAP.
<b>Here is the error message from my sapinst.log</b>:
ERROR 2007-08-03 16:01:32
FSL-06002 Error 1060 (The specified service does not exist as an
installed service.) in execution of a 'SyWinGetSecurityDescriptor'
function, line (1296), with parameter (Error in getting security
descriptor for 'MSSQLSERVER' NT service).
ERROR 2007-08-03 16:01:32
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error
text undefined.
ERROR 2007-08-03 16:01:32
FCO-00011 The step doGrantServiceRights with step key
|NW_Addin_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|7|0|NW_CreateJavaSchema|ind|ind|ind|ind|1|0|NW_MSS_DB|ind|ind|ind|ind|6|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with
status ERROR .
Rich -
Which patch to begin with SAP netweaver 2004s - BI 7.0
Hi every body,
I have some questions on this new BW release.
1)Which patch could correct the most problems on BI 7.0?
2)Do the configuration of instal an 7.O with using the 3.5 functionalities, means that we have not the 7.0 bugs on the new objects (DTP, datastore, ...)because we do not use them ?
3)In an upgrade configuration, do it exist a tool or anything which permit to upgrade, for example ODS into Datastore or update rule into DTP and so on ?
Thanks a lot for your answers
best regards
Ulrich LARCHERHi Ulrich,
ad 1.)
We (SAP) recommend to start with SPS7, which greatly improves stability especially in the frontend area. For the backend feature, you could easily go with SPS6.
ad 2.)
pretty much, yet there might be some hiccups. In general, most customers with a technical upgrade (upgrade to SAP NetWeaver 2004s, yet using mainly BW 3.5 features) do not report too many issues.
ad 3.)
for your examples given, there are kind of migration tools. A former ODS Object will automatically be an DataStore Object; a DTP can be created with an update rule as template starting from SPS7 (please be aware that the conversion of a routine can only happen on a best guess base - you will have to check the results in case of extensive / complex ABAP routines). In general, you will also find an extensive description about the migration support tools for SAP NetWeaver in the SPS7 version of the documentation. We have included a dedicated chapter in the technical operation manual (TOM) for most of the features that are affected by migration.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office -
Hi,
I installed Netweaver 2004s with rapid installer but i can not connect to BI7.0 with SapLogon 710. SapLogon waiting for response forever. What are the post actions after I installed the Netweaver 2004s. I can connect to portal by IE.
I am new to this so any help will be greatly appreciated.
thanks,
JenniOS is Windows Server. SAPID is IKI. I am the only one trying to connect to BI so DPMON is not the issue. I wanted to stop and start the SAPIKI_03 service but I can not stop it, maybe it is related to that.
What are the post steps after installing rapid installer?
How can I make sure that I installed Java+Abap stack or only Java?
Thank you for your help.
jenn
Maybe you are looking for
-
internet explorer as well as firefox keeps showing certifacate expired warning on all my personal items (banks, hotmail,creditcards, firefox support, etc. right now,as i write this, i am in red browser with certificate error mode. to eliminate this,
-
$150 port in credit x2 lines no credit received
I can tell from other posts that many others are just as frustrated as I am. I switched from T-Mobile to Verizon on December 29th and was in luck, or so I thought, that they were offering a port in credit of $150 per smart phone. My husband and I mad
-
I updated firefox last night and now none of my history will show up in my location bar. Everytime I either close the browser window or start a new tab I have to completely type out new addresses.
-
Advice on creating Answers with different line heights
Some of my answers have 1 line, some have 2, some even have 3 lines. Any recommendations on configuring my Quiz slide so that the boxes automatically resize? Currently, I have two problems: 1) I need to manually page-layout every slide where one or m
-
2012 MacBook Pro 15" retina [USB 3.0 Issue]
Hello all, I am having an issue with my new laptop, please read! I've purchased Macbook pro retina few days back, and I can't connect my 3.0 USB ext hdd I have tried formatting with my other Mac computer, under every possible system type(?) such as "