Accessing cache server of JRun
Hi there,
I am writing a .NET app that ports data from one database to
another. The destination database is used by a JRun v3.01 server
application. The cache server of JRun is used to store the next
primary key for every table in the database (no auto-incrementing
values). The problem is, my export app sometimes takes an ID that
the cache server is going to use next, and then obviously an error
occurs. However, if I restart the server for my application, and
then try to export, then it works successfully as the cache was
cleared and the latest ID value was retrieved, even if I did the
export using my new application. Does anyone know how I can access
this cache server from my .NET application?
Thanks a lot!!
hey
u can use mozilla,i use that,but u need to give the host name for XI server in the drivers.>etc folder on ur local PC.use Java 1.4.2
thanx
ahmad
Message was edited by:
Ahmad
Similar Messages
-
Architectural Choice for accessing Coherence Cache Server
I am a newbie and have a coherence use-case question.
When accessing an independent coherence cache server from application code such as an EJB deployed in WLS, architecturally does one write up an entity which is then used as a sole point of
access to the resource (coherence cache server) for querying, adding, modifying entries or are the accesses to the coherence cache server split and spread among the application code.
For example,
1. I write an EJB (EJB 1) which recieves the request from other EJB's (EJB 2, EJB 3), EJB 1 runs requests from EJB2 and EJB 3 on the Coherence Cache Server and acts as the sole point of
contact to the resource.
2. EJB 2 and EJB 3 both run requests against the coherence cache server. No fixed entity in architecture repsonsible for interaction with Coherence Cache Server.
Which is more common ?stevephe wrote:
Yes you could treat Coherence as a "pluggable" resource, just like a database. But that, just like in the case of a database, wouldn't boil it down to a single entity/interface. You'd treat Coherence as a "integration tier" resource that you'd "plumb in" just like you would a database, thus shielding your application's "domain" objects from integration-level concerns. That's how I've tiered our application, although we aren't inside a container like Weblogic/WebSphere/etc. The domain objects specify their persistence requirements via a multiplicity of interfaces; those interfaces have a number of implementations in the integration tier, one set of which just happens to be a Coherence set. You can use a "registry" approach to pick up the appropriate implementations (we use Spring injection.) Have a look at the Coherence book from Apress for more details.Apress? You mean Packt, don't you?
Best regards,
Robert -
How to apply Qos in the precedence of cache server
m in an isp and iwant to apply the QOS to enhance my network internet performance
actually i have two requests , i will start with showing brief topology about my network and start asking the questions .
here is the topology below :
from the topology above , my access is only on R1 which is BGP internet gateway router and R2 is my ISP router.
1- i want to apply Qos on R1 so that a subnet of 32 ips to have gurantee bandwidth of 30M .
assume the subnet is 10.20.30.0/27 that need to be bw gurantee .
2- i want the download traffic by idman or ftp on my Router R1 dont exceed 50 % of my total bw .
i mean that i have 450M bandwith from my isp , & sometimes we have a slow in browsing , so i want to enhance the browsing quality because its more important that downloading files from internet.
here is my two requests above , i dont know how it will work with the precedence of the cache server .
anyway , i will paste my config of router and i will replace my puplic ips with xxx for privacy .
7200Gateway#sh run
Building configuration...
Current configuration : 10149 bytes
upgrade fpd auto
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname 7200Gateway
boot-start-marker
boot-end-marker
logging message-counter syslog
logging buffered 50000
enable secret xxxxxxxxxxxxxx
no aaa new-model
ip source-route
ip wccp 80 redirect-list CACHE80
ip wccp 90 redirect-list CACHE90
ip cef
no ip domain lookup
ip accounting-threshold 4294967295
login block-for 180 attempts 3 within 60
login quiet-mode access-class telnet
login on-failure log
login on-success log
no ipv6 cef
multilink bundle-name authenticated
username xxxxxx password xxxxx
archive
log config
hidekeys
interface GigabitEthernet0/1
description LAN
bandwidth 230000
ip address 10.160.150.2 255.255.255.0
ip wccp 80 redirect in
ip policy route-map CACHE-REDIRECT
load-interval 30
duplex auto
speed auto
media-type rj45
negotiation auto
interface FastEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/2
description Cache
bandwidth 150000
ip address x.x.x.x 255.255.255.248
ip wccp redirect exclude in
load-interval 30
duplex auto
speed 1000
media-type rj45
negotiation auto
interface GigabitEthernet0/3
description Internet
bandwidth 230000
ip address x.x.x.x 255.255.255.252
ip wccp 90 redirect in
load-interval 30
duplex full
speed 1000
media-type sfp
negotiation auto
router bgp zzzzzzz
no synchronization
bgp log-neighbor-changes
network xxxx mask xxxxx
network xxxx mask xxxx
network xxxx mask xxxxx
network xxxx mask xxxx
network xxxx mask xxxxx
network xxxx mask xxxx
redistribute connected
redistribute static
neighbor zzzzzzzz remote-as zzzzzzz
neighbor zzzzzzz password zzzzzzz
neighbor zzzzzz route-map Pipo out
no auto-summary
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 xxxxxxxxxxx
ip route xxxxxxxx 255.255.0.0 xxxxxxxxxx
ip route xxxxxxxx 255.255.0.0 xxxxxxxxxx
ip route xxxxxxxx 255.255.0.0 xxxxxxxxxx
ip route xxxxxxxx 255.255.0.0 xxxxxxxxxx
ip route xxxxxxxx 255.255.0.0 xxxxxxxxxx
ip route xxxxxxxx 255.255.0.0 xxxxxxxxxx
ip route xxxxxxxx 255.255.0.0 xxxxxxxxxx
no ip http server
no ip http secure-server
ip flow-top-talkers
top 200
sort-by bytes
cache-timeout 5000
ip access-list extended bb
permit ip xxxx.xxxx.xx.0 0.0.1.255 any
ip access-list extended CACHE80
permit tcp xxxxxxx any eq www
ip access-list extended CACHE90
permit tcp any xxxxx.0 0.0.0.255
ip access-list extended pipo
permit ip xxxxx xxxxxxx any
permit ip xxxxx xxxxxxx any
ip access-list extended private
permit tcp 172.16.0.0 0.0.255.255 any eq www
permit ip 10.20.30.0 0.0.0.255 any
ip access-list extended telnet
permit ip xxxxxx xxxxxxx.255.255 any log
permit ip xxxx xxxxx 0.0.0.255 any log
ip prefix-list bb seq 5 permit xxxxx
ip prefix-list bbseq 10 permit xxxxxx
logging history size 500
no cdp run
route-map pipo permit 10
match ip address prefix-list pipo1
route-map pipo permit 20
match ip address prefix-list newsubnet
set metric 500
set origin incomplete
set as-path prepend xxxxxxxxx
route-map permit 10
match ip address prefix-list bibo
route-map CACHE-REDIRECT permit 10
match ip address private
set ip next-hop 1vvvvvv
route-map CACHE-REDIRECT permit 20
match ip address bibo e1
set ip next-hop vvvvvv
route-map CACHE-REDIRECT permit 30
match ip address pipo
set ip next-hop vvvvvvvvvv
route-map CACHE-REDIRECT permit 100
snmp-server community xxxxxx RO
control-plane
dial-peer cor custom
line con 0
password xxxxxxxx
logging synchronous
login
stopbits 1
line aux 0
stopbits 1
line vty 0 4
exec-timeout 60 0
password xxxxxxxxxxxxxxxxx
logging synchronous
login local
endHi Vinay,
Please check the program. I have used the replace statement but it is not working.
IF NOT v_sap_bom_rec IS INITIAL.
Spliting the records at '~' delimiter
SPLIT v_sap_bom_rec AT c_del INTO wa_bom_file-model_name
wa_bom_file-product_code
wa_bom_file-description
wa_bom_file-product_type
wa_bom_file-mfg_part_num
wa_bom_file-mfg_part_desc.
REPLACE cl_abap_char_utilities=>horizontal_tab IN wa_bom_file-mfg_part_desc WITH space .
wa_bom_file-status = c_status.
APPEND wa_bom_file TO i_bom_file.
But it is not working.
Please help me..
Thanks
Neelima -
Dashboard Design Cache Server failed to start after upgrade to BOBJ 4.0 SP09 Patch 3
Hi Friends,
We have upgraded our BOBJ 4.0 server from SP04 Patch 8 to SP09 patch 3.
After upgrade completed "Dashboard Design Cache Server" Failed to start. other servers are running fine.
xccache_<hostname>.DashboardDesignCacheServer_trace.000003.glf Error Log:
|c24257f2-85df-0f2b-efe2-d7cfe59df826|2014 06 19 14:04:21:444|-0400|Information|Information|>=|S| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200||{|0|1|0|1|-|-|-|-|-|-||||||||||||SessionManagerFactory::createInstance
-:0:-: TraceLog message 1241
|84f9fa46-c9ce-d9c4-fb5b-a08e6b6c1fea|2014 06 19 14:04:21:451|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||using OSGi emulation; cause: java.lang.ClassNotFoundException: org.eclipse.core.runtime.Platform
-:0:-: TraceLog message 1242
|2eb28d2c-acaa-e2ff-26de-0ce297ad41e5|2014 06 19 14:04:21:502|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||adding contributions from "jar:file:/bobje/sap_bobj/enterprise_xi40/java/lib/dsl_engine.jar!/META-INF/DSLContributions/DSLContributions.properties": DSL-Contribution = com.sap.sl.sdk.datasource.strategy.DataSourceStrategyContribution,com.sap.sl.sdk.services.session.BridgeSessionContribution,com.sap.sl.sdk.session.cms.BridgeCmsSessionContribution,com.sap.sl.sdk.session.filesystem.BridgeFileSystemSessionContribution,com.sap.sl.contributions.EPackageContribution,com.businessobjects.dsl.framework.session.SessionContribution,com.sap.sl.core.emf.registry.GeneratedPackageContribution,com.businessobjects.dsl.services.JavaDPContribution,com.businessobjects.dsl.services.repository.RepositoryServicesContribution,com.businessobjects.dsl.services.olap.sapbw.SapBwBrowsingServicesContribution,com.businessobjects.dsl.services.universe.UniverseServicesContribution,com.businessobjects.dsl.services.security.SecurityServicesContribution,com.businessobjects.mds.consumption.ConsumptionContribution,com.businessobjects.mds.consumption.SecurityKeyServiceContribution,com.businessobjects.mds.olap.protocol.bics.BICSClientContribution,com.businessobjects.mds.olap.protocol.ess_japi.EssJapiClientContribution,com.businessobjects.mds.olap.protocol.sapbapi.SapRfcClientContribution,com.businessobjects.mds.olap.protocol.xmla.XMLAClientContribution,com.businessobjects.mds.olap.OlapClientContribution,com.businessobjects.mds.publishing.PublishingContribution,com.businessobjects.mds.repository.cms.CMSSessionContribution,com.businessobjects.mds.repository.filesystem.FSSessionContribution,com.businessobjects.mds.repository.memory.MemorySessionContribution,com.businessobjects.mds.securedconnection.services.SecuredConnectionContribution,com.businessobjects.mds.security.cms.CMSSecurityContribution,com.businessobjects.mds.security.SecurityContribution,com.businessobjects.mds.services.internal.MdsModelContribution,com.sap.sl.edp.dataprovider.bics.BicsDataProviderBuilderContribution,com.sap.sl.edp.dataprovider.olap.OlapDataProviderBuilderContribution,com.sap.sl.edp.dataprovider.relational.RelationalDataProviderBuilderContribution,com.sap.sl.pquery.PQueryServiceContribution
jvm/Bootstrap.cpp:146:-: TraceLog message 1243
|9992bc42-cf8b-51bd-739f-ee471da81b76|2014 06 19 14:04:22:292|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|47600550826240|| ||||||||||||||||||||||ras21-core: CBootstrap::getSLUserSecurity starting wait loop[3], timeout[119]
-:0:-: TraceLog message 1244
|762aa011-8afb-af8d-6bd6-a61be1be142d|2014 06 19 14:04:22:399|-0400|Error| |>>| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at sun.awt.AppContext$6.getContext(AppContext.java:822)
at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
at java.util.TimeZone.getDefault(TimeZone.java:515)
at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
... 21 more
Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1011)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1036)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at com.sun.jmx.trace.Trace.out(Trace.java:180)
at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
at java.lang.Thread.run(Thread.java:743)
-:0:-: TraceLog message 1245
|4ab25da4-f37d-97ff-b2ad-a97877076bb3|2014 06 19 14:04:22:399|-0400|Information|Information|>=|S| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200||}|0|1|0|1|-|-|-|-|-|-||||||||||||SessionManagerFactory::createInstance: 00.957
-:0:-: TraceLog message 1246
|d3abc036-3e0f-728a-7dba-e3b540d39fe6|2014 06 19 14:04:22:451|-0400|Error| |>>| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.bridge.JavaBridgeMain||Could not initialize processing subsystem
java.lang.ExceptionInInitializerError
at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:243)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
... 10 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
... 11 more
Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at sun.awt.AppContext$6.getContext(AppContext.java:822)
at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
at java.util.TimeZone.getDefault(TimeZone.java:515)
at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
... 21 more
Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1011)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1036)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at com.sun.jmx.trace.Trace.out(Trace.java:180)
at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
at java.lang.Thread.run(Thread.java:743)
-:0:-: TraceLog message 1247
|7fad3c80-8dfb-1944-911f-4d98498f150a|2014 06 19 14:04:22:491|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||Caught Error at top level
java.lang.ExceptionInInitializerError
at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:243)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
... 10 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
... 11 more
Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at sun.awt.AppContext$6.getContext(AppContext.java:822)
at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
at java.util.TimeZone.getDefault(TimeZone.java:515)
at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
... 21 more
Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1011)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1036)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at com.sun.jmx.trace.Trace.out(Trace.java:180)
at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
at java.lang.Thread.run(Thread.java:743)
-:0:-: TraceLog message 1248
|dd2a290d-c8ad-ebea-d1b5-3ebe783e598b|2014 06 19 14:04:22:491|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||BEGIN TRACING JVM PROPERTIES
java.vendor = <SAP AG>
sun.management.compiler = <HotSpot 64-Bit Tiered Compilers>
os.name = <Linux>
sun.boot.class.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/sapjvm-alt-rt.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/resources.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/rt.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/sunrsasign.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jsse.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jce.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/charsets.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jfr.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/classes:/bobje/sap_bobj/enterprise_xi40/java/wily/Agent.jar>
ooc.orb.oa.thread_pool = <64>
java.vm.specification.vendor = <Sun Microsystems Inc.>
businessobjects.server.friendlyname = <halsapad12.DashboardDesignCacheServer>
businessobjects.logs.home = </bobje/sap_bobj/logging/>
java.runtime.version = <6.1.055>
com.sap.vm.version = <10>
businessobjects.ns = <hal-sapa-d12.dc.fmcna.com:6400>
com.wily.log4j.defaultInitOverride = <true>
user.name = <cbi>
user.language = <en>
sun.boot.library.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64>
java.version = <1.6.0_51>
user.timezone = <America/New_York>
java.net.preferIPv4Stack = <false>
sun.arch.data.model = <64>
java.endorsed.dirs = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/endorsed>
sun.cpu.isalist = <>
sun.jnu.encoding = <UTF-8>
file.encoding.pkg = <sun.io>
file.separator = </>
java.specification.name = <Java Platform API Specification>
com.wily.introscope.agent.agentName = <xccache_halsapad12.DashboardDesignCacheServer_java>
java.class.version = <50.0>
user.country = <US>
java.home = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre>
com.sap.vm.compressedoops = <true>
java.vm.info = <Aug 12 2013 00:30:55 - 61_REL - optU - linux amd64 - 6 - bas2:201693 (mixed mode)>
os.version = <2.6.18-128.el5>
path.separator = <:>
businessobjects.enterprise.orb.threadmodel = <threaded>
java.vm.version = <6.1.055 23.5-b02>
com.sap.vm.type = <opt>
introscope.enterprisemanager.serversockets.reuseaddr = <false>
java.awt.printerjob = <sun.print.PSPrinterJob>
sun.io.unicode.encoding = <UnicodeLittle>
com.sap.vm.codeline = <61_REL>
user.home = </sapmnt/CBP/cbi>
java.specification.vendor = <Sun Microsystems Inc.>
tracelog.logdir = </bobje/sap_bobj/logging/>
java.library.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64/server:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/../lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x64/:/bobje/sap_bobj/enterprise_xi40/linux_x86/:/bobje/sap_bobj/enterprise_xi40/linux_x64/wcs/components/:/bobje/sap_bobj/enterprise_xi40/linux_x64/plugins//auth/secEnterprise:/bobje/sap_bobj/enterprise_xi40/linux_x64/crpe/:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw/:/bobje/sap_bobj/enterprise_xi40/linux_x64/plugins//desktop/CrystalEnterprise.Report:/bobje/sap_bobj/enterprise_xi40/linux_x86/ras:/bobje/sap_bobj/mysql/lib:/bobje/sap_bobj/enterprise_xi40/dataAccess/connectionServer/drivers/lib64:/bobje/perl/lib/5.8.0/i386-linux-thread-multi/CORE:/bobje/sap_bobj/enterprise_xi40/linux_x64//sapjvm/jre/lib/amd64/server:/bobje/sap_bobj/enterprise_xi40/linux_x64//sapjvm/jre/lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw/lib-i86_linux/X11:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw//lib-linux:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw//lib-linux_optimized:/bobje/oracle/CBI/db_home/lib:/home/db2cbi/sqllib/lib64:/home/db2cbi/sqllib/lib32:/bobje/sap_bobj/enterprise_xi40/linux_x86:/sapmnt/CBP/db2cbi/sqllib/lib64:/sapmnt/CBP/db2cbi/sqllib/lib32:/usr/X11R6/lib:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib>
java.vendor.url = <http://www.sap.com/>
businessobjects.enterprise.orb.thread_pool_size = <5>
java.vm.vendor = <SAP AG>
java.runtime.name = <Java(TM) SE Runtime Environment>
java.class.path = <:/bobje/sap_bobj/enterprise_xi40/java/lib//XcelsiusServer.jar:/sapmnt/CBP/db2cbi/sqllib/java/db2jcc_license_cu.jar:/sapmnt/CBP/db2cbi/sqllib/java/db2java.zip:/sapmnt/CBP/db2cbi/sqllib/java/db2jcc.jar:.::/bobje/sap_bobj/enterprise_xi40//java/wily/Agent.jar>
tracelog.jni = <1>
bobj.enterprise.home = </bobje/sap_bobj/enterprise_xi40/>
businessobjects.enterprise.orb.request_timeout = <3600000>
java.vm.specification.name = <Java Virtual Machine Specification>
java.vm.specification.version = <1.0>
sun.cpu.endian = <little>
sun.os.patch.level = <unknown>
java.awt.headless = <true>
java.io.tmpdir = </tmp>
java.vendor.url.bug = <http://service.sap.com/support>
businessobjects.enterprise.orb.client_timeout = <0>
ooc.orb.oa.conc_model = <thread_pool>
os.arch = <amd64>
java.awt.graphicsenv = <sun.awt.X11GraphicsEnvironment>
java.ext.dirs = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/ext-sap:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/ext:/usr/java/packages/lib/ext>
user.dir = </bobje/sap_bobj/enterprise_xi40/linux_x64>
bobj.logging = <true>
line.separator = <
>
java.vm.name = <SAP Java Server VM>
file.encoding = <UTF-8>
tracelog.process = <xccache_halsapad12.DashboardDesignCacheServer_java>
com.sap.vm.profilingserver = <true>
java.specification.version = <1.6>
com.wily.introscope.agentProfile = </bobje/sap_bobj/enterprise_xi40//java/wily/halsapad12.DashboardDesignCacheServer.profile>
END TRACING JVM PROPERTIES
-:0:-: TraceLog message 1249
|a79b935e-9c92-9957-35bf-2c937079beb8|2014 06 19 14:04:22:492|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||BEGIN TRACING COMMAND LINE
-loggingPath
/bobje/sap_bobj/logging/
-cache
-documentType
CrystalEnterprise.XL.Query
-nops
-restart
-fg
-name
halsapad12.DashboardDesignCacheServer
-pidfile
/bobje/sap_bobj/serverpids/halsapad12_halsapad12.DashboardDesignCacheServer.pid
-ns
hal-sapa-d12.dc.fmcna.com:6400
-procParentIOR
IOR:010000002500000049444c3a4a6176614272696467652f4941646170746572426f6f7473747261703a312e300000000001000000000000005a000000010101ca1a00000068616c2d736170612d6431322e64632e666d636e612e636f6d006cbd10000000000000001c26a353bb16050003000000010000000100000014000000011af5ca010001000000000000010100000000000200
-libraryName
XcelsiusServer
-useSLUS
END TRACING COMMAND LINE
-:0:-: TraceLog message 1250
|088b0565-be95-fe7f-e474-4e3c45773bbc|2014 06 19 14:04:22:492|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||11 threads are still alive in this JVM
Thread 'Thread[main,5,main]' is still alive
Thread 'Thread[Business Objects - Sessions Clean up,5,main]' is still alive
Thread 'Thread[Thread-2,5,main]' is still alive
Thread 'Thread[Configuration Watch Heartbeat Heartbeat,5,Agent]' is still alive
Thread 'Thread[Remove Metric Data Watch Heartbeat Heartbeat,5,Agent]' is still alive
Thread 'Thread[Agent Heartbeat,5,Agent]' is still alive
Thread 'Thread[Agent Execution,5,Agent]' is still alive
Thread 'Thread[Agent ServerConnection,5,Agent]' is still alive
Thread 'Thread[UnknownHub Hub Transmit 1,5,Agent]' is still alive
Thread 'Thread[UnknownHub Hub Receive 1,5,Agent]' is still alive
Thread 'Thread[PO:client_main Mailman 1,5,Agent]' is still alive
Regards
Kannan KKannan,
the error in your logs like "NoClassDefFoundError" etc. point us towards issues with jar files. either they are missing or not the correct ones.
A general practice in such situation is to
stop all servers except CMS,IFRS,OFRS > repair the base installation
OR
If you have a working environment with the exact same patch, copy the 'lib' folder from "/bobje/sap_bobj/enterprise_xi40/java/" to the non-working server.
PS: please attach the logs to the thread instead of pasting the content.
-Nikhil Nair -
Hi,
We have installed content server and it is working fine. We would like to install cache server to access content server from different location to reduce the access time. Is there any document/guide to link cache server to the existing content server.
For ex.When the user in Delhi stores the original, it has to route through cache server (Located at Delhi) to the content server (Located at Chennai) and get stored in Content server.
My mail ID is [email protected]
PrasannaHi Prasanna,
the installation of a cache server is pretty similar to a content sever. Therefore it's covered in the installation guide of the content server. You find the installation guide on
http://service.sap.com/instguides -> SAP Netweaver -> SAP Netweaver 7.0 (NW2004S) -> Installation
In the Window scroll down to the end. You find the Installtion Guides under
3 - Installation - Standalone Engines - > Installation - Content Server 6.40 on UNIX
3 - Installation - Standalone Engines - > Installation - Content Server 6.40 on Windows
On http://service.sap.com/ContentServer you find additional information including an FAQ answering your questions on the cache server.
Bye, Michael -
Hi,
1. What is the procedure to copy originals from local content server to central content servers located at different geographical locations. (There is a report SAPKROTP, but i am unable to execute it). Even if copy it, will it display in DIR as two different files.
2. About Cache server : As name implies it is a temp storage and based on reference from SAP help and few other documents, it is very clear that documents cannot be checked in cache server. Also We are not defining cache server in OAC0 and OACT settings. Hence Can we check-in originals in cache server?.
If any of you have worked with multiple caching and multiple content server distributed environment, please mail me the document. My mail id is [email protected]
Prasanna
<b>Points will be awarded for useful answers</b>Hi Prasanna,
A Cache Server is used to store copies of documents when they are accessed for the first time. As a result, the documents can be accessed again more quickly, since the contents are taken directly from the Cache.
With Cache the Originals documents are stored in one location on content server. The copies in the cache can be replaced with newer content at any time.
The Original document will still be located on the Content Server
The Content Server can Retrieve the cache Content at any time
As earlier i had told you that any number of content servers can be installed in different locations. The contents are transferred directly b/w the client & content server. If the Content server are accessed from different locations that are linked via WAN cache servers should be used.
You need to install one Cache Server at each location on WAN for enhancing the performance & Reducing the traffic in Network. So Cache server is used only for speeding up accesses of documents stored.
For Customizing the Multilayer Cache Servers & Content Servers follow this SAP NOTE <b>0216419</b>
Hope following this Note will help you & solve your problem.
Regards
Rehman
Reward Your Points If Useful -
The Security Token Service is not available error on dedicated Distributed Cache server
I have an error on a dedicated Distributed Cache server stating that the Security Token Service is not available. I was under the impression that when Distributed Cache was running on a dedicated server that the only service that should be enabled
is Distributed Cache.
The token service is working as expected on all other servers but this one. Does this service need to be started or should I just ignore this error message?
Jennifer Knight (MCITP, MCPD)as per my little experience with 2013, if STS is working fine on Web server then I am sure that sharepoint will be fine...Distributed cache stores the ST issued by STS. NO need to worry about this error.
Login
Token Cache
DistributedLogonTokenCache
This
cache stores the security token issued by a Secure Token Service for use by any web server in the server farm. Any web server that receives a request for resources can access the security token from the cache, authenticate the user, and provide access to the
resources requested.
I would say check the ULS logs and get more details about the error why its not working on that server.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
How can i see the content of the cache server 2 ?
How can i see the content of the cache server 2 ?
Caching server is backed by an sqlite database. If you want to see what you currently have downloaded, you can glean some information by accessing the database. Use this command to connect to the database:
sudo sqlite3 /Library/Server/Caching/Data/AssetInfo.db
Once connected, you can use .tables to see the tables in the database but the one with the most information appears to be ZASSET. Use:
select * from ZASSET;
To list the current contents. You will get a series of records similar to the following:
26|1|5|0|868991341|402440412.42114|402507221.969799|ffaf18a45cd5dd5e853233629036 5767|30B9108D-ABE4-4061-A2E0-42E91301249B|Fri, 06 Sep 2013 18:21:34 GMT|/content/downloads/14/11/091-9722/ognnjd4fno85m4pbapjtnv23b7rf1mkufx/OSXUpd Combo10.8.5.pkg|
Note that the final value is a human recognizable name of the package. However, you may also see items like this:
125|1|4|0|11622676|406739736.508118|406739736.508125|4f1f9b08b32f9f6211e4569604b 1efef|481BF3D9-99BB-415F-ADB6-860EDD24B08E|Thu, 14 Nov 2013 10:24:30 GMT|/us/r1000/032/Purple6/v4/37/a3/d2/37a3d2f7-2594-8224-7eda-712f17a3fd8b/mzps 6227198657217312566.D2.pd.ipa|
This is an iOS application. There is no real way that I know of yet to match the package name (mzps6227198657217312566.D2.pd.ipa) to a product name.
When finished, type .quit
R-
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available on the iBooks Store -
How to connect SQL server using JRun
I am relatively dumb into Java. I am running JRun server in Unix box, and I need to connect to the SQL server (full marks for guesssing that SQL server is on the Win2K box).
Now I want to connect to the SQL server from Jrun using JSPs.
Question:
1. Is JDBC:ODBC only way to connect to the SQL server, if yes -
2. Do I have to create a DSN on the server for the JDBC:ODBC bridge to work
3. Can I write my own database connection package,
Appreciate if any body can help me with this problem, and if you have written a package to connect to the database, then would be nice if you would let me try the same.
If you have any responses, please email me at [email protected]
Thanks in Advance for the anticipated help.
Viviar PrasadHi Prasad,
There is two ways(what I have done) to connect to sql server in jRun..
1) using your jdbc - odbc connectivity using your type one jdbc driver..
2) using type 4 driver.. (type 2 and 3 are not available right now for sql server)
in 1 you have to create an dsn and use it directly in program bypassing jrun management console(I mean u don't have to configure for that)
in 2 case you need to use jrun proprietery driver for the jdbc... there is a problem here..
this driver is available in Jrun 3.0 enterprise edition only and still has got some problem so you need to apply service pack-2 to your Jrun installation and need to download the driver.. jdbc driver from following link
ftp://ftp.allaire.com/kbftp/jrun/all/jrun_drivers.jar.zip
this will suply a html doc along with the driver . which will explain you how to apply..
you can download jdbc driver specilly for sql server from this link http://www.j-netdirect.com/jsqlconnect2_26.zip
but it will expire in a month..
any way once you have obtain any of the above driver, follow these step to configure jdbc in jrun.. you need to put the driver in the classpath..
1 - open your management console
2- select the webapplication for which you want to configure from left frame of mc(management console)
3- select jdbc data source click the add button and follow the wizard..
for more info ref to jrun quick start configuring jdbc settings that came with your JRun..
or you can directly click the link there and type
the name of the
first
datasource(you have supply any name you will be using that to access db in your java prog)
second name of the the jdbc driver
for Jrun it's
allire.jrun.jdbc.JRunDriver
for net direct
com.jnetdirect.jsql.JSQLDriver
third
url for jrun driver
jdbc:jrun:sqlserver://hostname:portno/databasename = dbname; USER = uname; Password = password
where dbname is your database name
uname is your sql server user name e.g sa
password is your password for the corresponding user name
where hostname is the name of the computer where your sqlserver is running it could be an ip e.g 10.0.0.32:1433
1433 is the default port no for the sqlserver if you are using tcp protocol to connect to the sql server
url for net direct
jdbc:JSQLConnect//hostname:port/databasename=dbname; USER =uname; Password = password
for any more information on this you can mail me in this id
[email protected]
All the best..
regards
Bishwa -
Mapviewer cache server security
I have an Oracle Application Server with MapViewer deployed
There are some map tile layers prefetched so all the files are in <tile_storage default_root_path> directory.
Also there is an application that uses mapviewer
but if I write in the browser host:port/mapviewer/mcserver?request=gettile&format=PNG&zoomlevel=0&mapcache=name&mx=1&my=2, I get the image.
How can I restrict access to mapviewer cache server to nonauthenticated users, so the prefetched images could be accessed only through my application.
Thanks.Hi!
First of all you can enable security constraints for +/mapviewer/*+ pages in you app server. -
Hi,
We have installed the content server quite long back and it is working fine. Now as part of plant rollout we are installing cache server for other locations. We have installed cache server. But We have few doubts in configuring. Can sombody has any material wrt cache server configuration (like SCMSHO,SCMSCA...) with screen shots.
prasannaHello,
find the below comments ,could be helpful for you.
Pre-Installation Checklist for the SAP Knowledge Warehouse
<u><b>Cache server Softwere</b></u>
Windows NT 4.0 Server English ( SP 4 or 5)
Windows NT Option Pack 4.0 with following components:
IIS 4.0
MS Data Access Components 1.5 (MDAC:ADO,ODBC and OLE DB) or higher
MS Managemant Console
NT Option Pack Common Files
Transaction Server (TS Core Componennts)
Windows Scripting Host (Windows Scripting Host Files)
MS Proxy Server 2.0
No non-SAP applications must be installed.
TCP/IP - protocol
RFC to the R/3 system must be possible
<u><b>Cache Server Hardware</b></u>
Manufactured by a SAP hardware partner
512 MB RAM
2 x Pentium Pro 200 MHz or higher (no Alpha CPUs)
Raid 1 for the operating system
Raid 5 for the devspaces of the SAP DB (recommended: 72 GB available)
Raid 1 for the logs of the SAP DB (at least 2 GB available, should not be on the same Raid like the Devspaces or the NT Page file)
High performance SCSI controller
Hostname must satisfy the requirements for R/3 -Installations
Regards,
Murali.S -
I lost my hard drive and am replacing a lot orf software on the new one.software. Bah!
But Adobe premiere 10 won't allow me to access the server to download a replacemet.
What am I doing wrong?Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 10: http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l -
i would want to know the main system parameters involved in the management of the cache server. Indeed our cacher server fills up until it's full and then some entries are deleted after some delay; i don't know which parameters manage these events.
Eric.Caching server is backed by an sqlite database. If you want to see what you currently have downloaded, you can glean some information by accessing the database. Use this command to connect to the database:
sudo sqlite3 /Library/Server/Caching/Data/AssetInfo.db
Once connected, you can use .tables to see the tables in the database but the one with the most information appears to be ZASSET. Use:
select * from ZASSET;
To list the current contents. You will get a series of records similar to the following:
26|1|5|0|868991341|402440412.42114|402507221.969799|ffaf18a45cd5dd5e853233629036 5767|30B9108D-ABE4-4061-A2E0-42E91301249B|Fri, 06 Sep 2013 18:21:34 GMT|/content/downloads/14/11/091-9722/ognnjd4fno85m4pbapjtnv23b7rf1mkufx/OSXUpd Combo10.8.5.pkg|
Note that the final value is a human recognizable name of the package. However, you may also see items like this:
125|1|4|0|11622676|406739736.508118|406739736.508125|4f1f9b08b32f9f6211e4569604b 1efef|481BF3D9-99BB-415F-ADB6-860EDD24B08E|Thu, 14 Nov 2013 10:24:30 GMT|/us/r1000/032/Purple6/v4/37/a3/d2/37a3d2f7-2594-8224-7eda-712f17a3fd8b/mzps 6227198657217312566.D2.pd.ipa|
This is an iOS application. There is no real way that I know of yet to match the package name (mzps6227198657217312566.D2.pd.ipa) to a product name.
When finished, type .quit
R-
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available on the iBooks Store -
Caching Server receives non-whitelisted requests
I run a OSX Caching Server on a 10.8.3 Mountain Lion System. While this update server solution works fine for most of the client computers, one client causes unusual requests:
2013/04/01 09:51:36:104 Request for non-whitelisted URL denied (http://192.168.42.3:53783/)
THis message is generated from each attempt to access a Mac Appstore Download (this one was for the Final Cut Pro X 10.0.8 update) and after using this URL, the client simply ignores the caching server and moves on downloading this assets from Apples source servers.
The client is a Protina MBP running the official 10.8.3 build.
Regards,I have this exact problem too. Interestingly, I have this on my Mini server, then I've setup a caching server on my MacBook Pro and its the same. This log is from my MacBook Pro, its called badgerbookpro.local but its the same on the Mini server. Both are runing 10.8.3
Jun 1 01:34:22 badgerbookpro.local AssetCache[4811]: Caching server started
Jun 1 01:34:25 badgerbookpro.local AssetCache[4811]: Registration succeeded. Resuming server.
Jun 1 01:37:02 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 01:37:02 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 01:38:23 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 01:38:23 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 01:43:51 badgerbookpro.local AssetCache[4811]: HTTPConnection[0x7fdc04b1b900]: responseHasAvailableData: - Sender is not current httpResponse
Jun 1 01:44:46 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 01:44:46 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 01:45:05 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 01:45:05 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 02:51:24 badgerbookpro.local AssetCache[4811]: Request for non-whitelisted URL denied (http://192.168.1.48:62249/)
Jun 1 02:51:24 badgerbookpro.local AssetCache[4811]: HTTP Server: Error 400 - Bad Request (/)
Jun 1 03:55:04 badgerbookpro.local AssetCache[4811]: Server shutting down (15)
Jun 1 03:55:04 badgerbookpro com.apple.launchd[1] (com.apple.AssetCache[4811]): Exited with code: 15 -
Caching server does not always cache. AppleId?
Under the services menu (Server version 4) I have Caching enabled.
The promise of this functionality thrilled me when I first discovered it. I have a family of Mac users, 5 laptops, 4 iPads, and 5 iPhones. Internet wise we are out of ADSL range and have to use 3G wireless data modems for access. This is fantastically expensive and we try to keep bandwidth usage to a minimum. Hence the promise of downloading once and having application updates cached automatically was wonderful.
However in some cases it seems to work wonderfully and others not at all. My guess is that many apps are individually coded to the AppleId of the end user and that unless you are using the same AppleId for all users the caching server is of limited use. Is this a good guess? Why would some apps not cache? Any suggestions?
Many thanks for your time.
MarkThank you Brenden.
That page was helpful but does not get to the root of my issue.
I listened to Steve Gibson spend 3 podcast episodes of Security Now elaborating on the fine details of iOS security some months ago. I seem to remember (and I may have this confused) that much of the content that the Apple systems download is encrypted using among other things the AppleId of the purchaser. This is not just a DRM measure but a security measure. It wont let code run unless it is verified. What I suspect the implication is for me and for caching services is that only shared content and maybe generic updates to operation system etc (things that are not encrypted with the AppleId as the key) could be cached.
Implication is that given most users in my household are buying their own applications via their own AppleId these files cannot be shared via a caching service. Hence if one daughter is using her own version of Final Cut tied to her AppleId and another has a different version of Final Cut tied to her AppleId (stupid example) but when an update becomes available the multiple gigabyte file is downloaded twice and ironically cached twice.
The above is only conjecture on my part but seems to fit with what is happening.
Does anyone here know the facts as to this?
Would love to know.
thanks again,
Mark
Maybe you are looking for
-
Distribution manager failed to connect to the distribution point
After upgrading my distribution point to windows server 2012 standard I can't distribute content to my distribution point. I see the following error. source: SMS Server Component: SMS_DISTRIBUTION_MANAGER message id 2391 Distribution Manager failed t
-
Hi, Did anyone try <env-entry-mapping> in orion-ejb-jar.xml? It seems that it is suppressed during deployment. The orion-ejb-jar.xml being generated into -deploymentDirectory place (specified or default) simply drops these mappings. The effect is tha
-
Hi, How to configure Crystal report using MySql? I added mysqlconnector.jar in CRConfig.xml file, Is there any jar to include for mySql? Pls Help me those who knows...
-
Probook 6540b; more memory causes system to slow down dramatically
Hi, I have a Probook 6540b with Intel i5 and I'm running Windows 7 Ultimate 64bit. I bought the notebook with 4GB RAM installed. I heard from the supplier that the computers tend to be "buggy" with more than 2GB RAM, but I needed the memory so I didn
-
Hi friends, i have created routing for finish product .in MTO senario i went for MRP RUN after sales order is entered. .the corresponding planned order is created . but when itry to convert the planned order to production order a message is coming