Accessing Cell Broadcast Settings/ Emergency Broadcasts

I'd like to have control over the Emergency Broadcasts that come through my phone. Where do I find these settings at? I can't find where it is to save my life.

My Z3+ doesn't have those options available.

Similar Messages

Broadcasting Settings: Workbook Precalc. Variable Sequence

Dear all,
does anybody know how it is possible to change the sequence of the variables for the pre-calculation in the Broadcaster settings for distributing a Workbook with different Queries?
Thanks a lot
Dieter

the sequence can be determined in the query level.
but if multiple query user in workbook or web template, there is a logic defined in a note 1060735.
regarding workbook Note 1416277 is describing a error correction.

Information Broadcasting settings Problem.

Hi All,
When we are trying to change the Information Broadcasting settings for some queries. We are not able to edit the existing settings as the message pops up saying system is not ready for change and asking us for the modifiable system. Is it possible to change the information broadcasting settings with out making the system modifiable?.
Regards,
Aditya.

In which system you are trying to do this?
I understand in DEV system, there should not be any problem of doing the system modifiable and then do the Broadcasting setting and then transport it to Qly and Prod.
However Qly and Prod system are not supposed to be modifiable.
Regards
Pankaj

Transfer Broadcaster settings from 3.0 to 7.0

Recently BEx has been upgraded from 3.0 to 7.0. Is there a way to display broadcaster settings from 7.0 that were created in 3.0? Or transfer them to 7.0? I have multiple broadcaster settings created in 3.0 and I want to transfer them to 7.0 to be able to use the email option as an attachment.
Thanks

Hi,
This might help you
How to upgrade from XI 3.0 to 7.0
Regards
Agasthuri Doss

Bex Broadcasting settings

Hi,
My requirment to schedule a web template which contains multiple views to send a EMAIL with PDF attachment on daily basis.
Is there any help document that explains settings
When i am in broadcaster settings....i can see options email and email(bursting)
PDF margins...etc
Can any one update me help doc link on broadcaster settings
Thanks

Hi,
check this below link.
this is a comprehensive BI documentation. it involves broadcasting PDF files as well.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60c829d8-e5cd-2b10-f8ba-b7ffb6a9a56b
Hope this helps.
Rgds,
Sreekul Nair

Information Broadcasting Settings (Dynamic Change or User Exit)

Hi,
We are working on BI7 and we have a need to print a cost centre specific report on different cost centre specific printers.
This relationship of user to cost center to printer is stored in a custom table(Ztable) as given below:
User Id         Cost Center              Printer
Abc               2000                        XYZ
It is easy to setup a setting in the Information Broadcasting and use it for printing. But problem is coming from the fact that it is a static setting and a new setting is required for each record of above custom table (Ztable).
Also, if there is any change in custom table entry, which is linked with R3 source system then we need to do manual changes in the Information Broadcasting settings. There are more than 520 printer records in this Ztable.
It could be better, if there was some way to use a single information broadcasting setting and use it with different parameters but I could not find any such option.
Other possibility is to create the settings by a background job but I did not see any such possibility as well.
Is there any user exit that can be used to manipulate Information Broadcasting settings in background?
Thank you very much for your help!
Praveen

hi praveen,
One of the important enhanceents in BI7 broadcasting was to "individualize the content based on master data"......
   for example....If the last field in your master data record was an email address...
                        you can create a report,   filter by the UserID (1'st field) and email it...
   I didn't send it to a printer....but I am guessing it should not be much different than emailing...
Good luck, BB

Best FC settings for broadcast?

Hello everyone,
I am relatively new at this, and I am looking for a better workflow and FC/compressor/ settings for our productions, and to solve a sound issue.
We use a set of Panasonic AG-HMC150P to capture external videos, so the footage is in HD (imported through ProRes)... sometimes we use our older Panasonic DVXs connected to a Tricaster to produce on-location multi-camera programs, and finally we record our studio programs on DV mini-tapes and/or recorded DVDs.
We need to produce each program in two formats: DVDs, and Mpeg-2 muxed to feed our video server (Cablecast), which in turns feeds a fiber-optic transmitter to the cable company.
At present what we do is import everything into a preset NTSC DV (3:2) 720x480 sequence (QuickTime Video Settings Compressor set at DV/DVPRO - NTSC) with 48 kHz- 16-bit audio. Then we basically send the finished product to compressor and export it to a standard best-quality 90-min DVD. We use that for our DVD copies of the program. Then what we do is grab the .ac3 and .m2v files created by compressor, and feed them to MPEG-Streamclip, exporting them as an Mpeg with MP2 audio stream; which creates the mpeg-2 file for our cablecast server.
So the first question is this: is there a better/efficient sequence setting or workflow we should use? Should we use one sequence setting for DVD production and then copy the content onto a different sequence with different settings for broadcast/mpeg-2 encoding?
The quality of the mpeg file (when played from the server onto our monitor) is quite good, although I am noticing a loss of quality when I watch the program on TV at home (some visual artifacts and occasional pixellations), but my main problem is sound crackling when the program displays lower thirds (occasionally), more pronounced when PPT files converted to jpeg graphics are displayed in the program. I am VERY careful to keep white levels below 90 IRE (or whatever the scopes indicate as being 90%) and apply broadcast safe filters (chroma and brightness). I keep my average sound level at about -12 dBFS with peaks not exceeding -6 dBFS (sound is compressed in SoundPro).
Any idea what might be causing the crackling? Thank you for any help you can provide...

I found the custom settings that I'd made from the DVD Best 90 minute preset and pasted them below. I made these based on a screen shot that my client provided of an MPEG Streamslip settings window.
Stefan, you should be able to start from any of the DVD presets in the Settings window. Then click "Duplicate Selected Setting" (just below the Settins tab, 3rd button over) to add a copy to the "Custom" settings folder. Select the copy, make changes in the Inspector window and then click "Save" (at the bottom right of the Inspector window).
My settings were for PAL, but the same settings should apply to NTSC minus frame rate and frame size differences. The key changes that I made were the number of encoding passes (I changed 2-pass to 1-pass) and the bit rate (the average bit rate and the maximum bit rate were increased). Also, I was encoding from DV source which has the same picture dimensions at its MPEG2 counterpart so there was no need to change the width and height.
After you've made your custom preset, encode a short test file and send it to the broadcaster to see if it's compliant with what they can broadcast before committing an entire program to it.
-Warren
Name: MPEG-2 6.2Mbps 1-pass Custom
Description: Custom settings based on screen shot provided by client.
File Extension: m2v
Estimated size: 9 GB/hour of source
Type: MPEG-2 video elementary stream
Usage:generic
Video Encoder
Format: M2V
Width and Height: Automatic
Pixel aspect ratio: Default
Crop: None
Padding: None
Frame rate: (100% of source)
Frame Controls: Automatically selected: Off
Start timecode from source
Aspect ratio: 4:3
Field dominance: Automatic
Average bit rate: 20 (Mbps)
1 Pass VBR enabled
Maximum bit rate: 23.5 (Mbps)
Best motion estimation
Closed GOP Size: 1/2 second, Structure: IBBP

Settings for Broadcasting

Dear all,
Can anyone figure me out. How to create a broadcasting setting (i.e.., sending mail ) through process chains once the infoprovider got filled.
I know there is a option to trigger it out from broadcast settings; but here i cant able to view that option.
What might be the Problem. only option i can able to view is direct scheduling.
All i wanna do is to send mails across my users;once the infoprovider got filled.

Hi,
Check the following thread.
broadcasting through process chains
I hope it will help.
Thanks,
S

Store broadcasting settings

Hi All,
I have given assignment to store all the information broadcasting settings ,
how can i achive this in BW server
Please help , iam new in BI.
Thanks in advance.

Hi
along with my old reply
Information Broadcasting:
Check the followings.
/people/sap.user72/blog/2005/12/23/summary-of-new-features-for-information-broadcasting-in-sap-netweaver-2004s
/people/community.user/blog/2006/12/28/exception-broadcasting-in-sap-netweaver-2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/296edc90-0201-0010-7982-c6dc0b288296
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00d91245-1f5d-2a10-c795-8394960f56cc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b485d390-0201-0010-8189-91444c74c69f
Regards
mahesh

Excessive Emergency Broadcasting "Required Weekly Test"-ing

Has anyone else noticed excessive Emergency Broadcasting System tests tonight? I've seen at least six (probably more like 8) "required weekly tests" in the past two hours and it's absolutely obnoxious. I'm in Northern NJ if that counts for anything.

When I first got FiOS TV almost 5 years ago I saw and heard tests 2 - 3 times per week, sometimes more, at all hours of the day and night. After about 6 months they disappeared, and I don't remember a test in at least a couple of years, I think they do them in the middle of the night when most people, including me, are asleep.And I never leave the TV on at night.
Is Verizon still installing new TV service in new areas where you are located? If so, I think that may be the reason for the tests. As they install a new subdivision or a multi-family building, etc, I think they are required to test to make sure it works in the new area. Unfortunately though, it appears that they cannot test in just the new area, but seem to cover a lot of areas already installed and activated.
But that many tests in a short time does seem to be excessive; perhaps the tests are failing and they are retesting trying to find the problem? I don't know. But I know I would not be happy either...and unfortunately I have no idea what you might be able to do about it. But I think it will go away soon.
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7.1, Build 09.97
Keller, TX 76248

Changing Broadcaster settings

Hello everybody,
I would like to know if there is any way of changing the owner of a broadcaster setting. I am the presently the owner of the settings and would like to transfer it to someone else (the client would like to keep the same technical name of the broadcaster settings). Is there any way of doing this? Any tricks?
I tried by opening RSRD_SETTING table via SM30, but SAP will not let me change its values...
Thankyou

I not sure either there is possibility to do it.
I would suggest to create the same settings with different user in TA RSRD_ADMIN.

Broadcast Settings

Hi
I have a process chain that kicks off a "Trigger Event Data Change" for an infoprovider, I have several broadcast settings for a web template which uses a query based on this infoprovider. When I first ran it, all the settings executed perfectly, about 2 days later some executed while others fell over with an error, the problem is everytime I run it some of the settings work while others fail but never the same ones fail, but there is always a failiure, the error message I get back is,
*Error: java.lang.NullPointerException*
I get this for each setting that fails.
The BEX Query is fine and when run on its own runs fine, the same with the WAD. The error only happens with the broadcast setting.
Anyone ever have the same problem? Thanks for the help.
Regards
Lyndon

It looks like there is something wrong with the java engine... maybe it's a time out, maybe it's something else...
let a systemguy have a look at it... (logs...)
Joke

Execute many Broadcasting Settings at one time

Hello Gurus,
I have ~ 20 broadcasting settings defined in my system and I am searching for a way (Transaction, Program etc.) to execute them in one step.
What I currenty do is:
Open each setting in Bex broadcaster in the Portal, press execute, and wait, and this for 20 times.
I have defined a broadcasting event in a process chain, that executes scheduled settings. But when errors in the chain occur, I have to start the settings manually.
Points will be awarded for every good tip!
br
klaus

HI,
Try Using RSBATCH and shcdule all these jobs in Process chain parallel.
Hope this helps,
Let me know if this works out for u...
Andy

Help in Finding BEx Broadcasting Settings

We recently refreshed our Sandbox environment with a copy of our Dev environment. We use Information Broadcasting. When someone opens a Workbook in BEx in our Sandbox environment and clicks "Distribute Workbook", they are prompted with the Broadcaster logon screen for our Dev environment and not Sandbox. This makes sense, since we copied our Dev environment. How do we change the settings so that the Broadcaster connects to Sandbox? Thanks.

Hi,
You need to make changes in SPRO to maintain Broadcasting Settings .
Regards,
Sasi.

Is Broadcasting Settings Transportable?

Hello friends,
                  I am working on Broadcasting Information from SAP Netweaver Enterprise Portal.
                 I am working in BW DEVELOPMENT SERVER and i have created broadcasting settings for a query and i have successfully broadcasted the reports to different users.
                  My question is i want to do it in BW PRODUCTION SERVER .I know that we can transport queries or workbooks from DEVELOPMENT SERVER TO QUALITY AND FROM THEIR TO BW PRODUCTION SERVER.
                    We will do all the Broadcasting settings for a query in BW DEVELOPMENT SERVER.Is it possible to transport BROADCASTING SETTINGS from BW DEVELOPMENT SERVER TO BW PRODUCTION SERVER?
                  If so,how to transport?
             Shall we directly do all the settings in BW PRODUCTION SERVER instead of transporting it from DEVELOPMENT TO PRODUCTION?
         Please, send me the relevant answer.It's very urgent.
Thanks
Mohan chand Reddy A

Hi,
Transporting Broadcast Settings
To make the broadcast settings available in various BI systems, transport them.
If the transport system is activated, a dialog box for specifying a transport request appears when you save the broadcast settings. Enter the required transport request.
If a fixed standard BEx transport request is specified, the broadcast settings are automatically written to this request and the transport request dialog box is not displayed.
The technical name of the object type (TLOGO) for broadcast settings in transport requests is BRSE.
Thanks

Accessing Cell Broadcast Settings/ Emergency Broadcasts

Similar Messages

Maybe you are looking for