Accessing Cost Center Dimension From GL_BALANCE_F

Hi:
I'm modifying the P&L tab on the Profitability dashboard. Most of the lines are derived from Account values, some expenses are derived from cost centers. I understand how to assign accounts to account group numbers in the configuration .CSV files, and I've been successful at getting the correct values. But I can't figure out how to get data from the W_GL_BALANCE_F table by cost center. I see that there is a dimension for cost center. How do I make the join?
Any suggestions are appreciated.
Thank you.

Hi All
Thanks for your inputs.But
1.Cost center is real cost center to answer Saravan's question.
2.One to one PC to CC may be for postings but issue here is how CC is getting populated /Also Cost elemenet does not carry any cost center assignment.To answer Radha's quation.
3.Field is "optional".Thats fine if we make it REQUIRED it may pick the CC but now issue is now field is under" optional"but still  it is picking up the CC.
Is there any other ideas please.
regards

Similar Messages

  • Bring profit center and cost center  hierarchy from R3 to BW in BI 7.0

    Hello,
    I need to get the hierarchy from R/3 to BW. Can someone send me a link or mention steps i need to do to bring profit center and cost center hiearchy from R3 to BW.
    Thanks
    Laura.

    As you would for any other infoobject
    Activate the business content hierarchy datasources on R3 for cost centre and profit centre
    Go into BW - replicate the metadata
    Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
    Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
    Then repeat new infopackages for all hierachies

  • Messg-AAPO189 :Account object Cost Center differs from that in asset master

    At the time of Asset Acquisition in T-Code F-90 using Internal order, the system throws the following error:
    Message-AAPO189  :Account object Cost Center differs from that in asset master
    But in Asset Master data and Internal Order Master data's Cost Centers are same. 
    And we are not facing this problem for all Assets (only for few asset class only we are facing this error).
    Please guide on this.
    Note:
    We are not using Joint Venture Accounting.
    Regards
    JS
    Edited by: JS on Aug 12, 2009 7:14 PM

    Closed

  • Cost Center Inheritance from Org Unit

    Good day all,
    Can someone please advise regarding cost center inheritance from org units?
    I understand the inheritance concept, however simple need to know if the CCenter is added to the org unit via A011 relationship, does the system physically create a A011 relationship on the position inhertiting the cost center from the org or does the system simply pick up the realtionship from the org unit relationsip for use in IT0001 field KOSTL (cost center)?
    Thanks guys, have a lovely day!
    Christy

    Hi Christy,
    As we know cost centre(K) is an unusual object in OM.Two type of objects internal  whose master record are in database table beloging to sap erp hcm and eexternal object whose master data belong to other application areas.Cost centre is an external object that is used to represent origin of costs.Inheritance concept is on the basis of whoch cost centre are assigned in org plan.
    directly related cost centre is called master cost centre and they are made via A011 cost centre assignment relationsip.they can be made at org unit,position or work centre and nornmally its org unit that common.Org unit at the top are asisgned the cost centre as a best practise so that all the org units below or reporting will inherit the same.
    Similarly multiple cost centre assignments can also e made through 1018 infotype(cost centre distribution).Inheritance also applied to them aswell.
    Hope this helps.
    No Worries
    KG

  • Extracting cost center data from two tables

    Hi Everyone,
    I'm trying to extract cost center data from two different tables in SAP and pull it into one InfoObject.  I'm using 0costcenter and it's already extracting data from one of the tables I need.  Could someone explain how to add the second table? Thank you.

    You can create a Generic Extractor , Create a view on 2 tables with proper join condition n use this to load 0COSTCENTER.

  • How to find the cost center group from cycle/ segment in CO module?

    Hi All,
    I need to fetch the list of cost centers in the cost center group against the cycle.
    Is there any table which will store the list of cost centers against the cycle?
    or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
    but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
    Regards,
    Mrunal

    FM: RK_AL_CYCLE_READ
    CHECK TABLE: T811K

  • How to receive the cost center group from legacy system

    Hi Experts,
    i need to collect  cost center group hierarchy from Legacy system.is there any standerd tcode available to get it.
    Usefull answers will be rewarded.
    looking forward to hear from all.
    regards,
    Tom

    Hi,
    Cost Center group can be viewed from field SETCLASS of table SETLEAF.
    To Fetch the relevant cost center from a cost center group, we can use FM: 'K_HIERARCHY_TABLE_READ'.
    Below thread may give you more details.
    Cost Center Group
    Regards,
    Ranjith.

  • Cost Center derivation from multiple statistical account assignments

    Dear all,
    I have
    a) a statistical internal with actual posted cost center A and
    b) a statistical WBS with actual posted cost center B.
    When posting with both (a) and (b) the cost center derived is from the statistical order. Is there a way to influence from which object the cost center will be derived.
    Kind regards,
    Orestis

    Hi Orestis,
    You can use substitution (OKC9) setting prerequisites as both internal order and WBS are filled and substituing the cost centre by the value from PRPS table.
    Regards,
    Eli

  • Which table to fetch cost center (KOSTL) from(material cost estimation )??

    Hi..
    i am going to create a report to display material cost estimate.
    it has two selection screen parametrs..(matnr and werks)..
    i need to display cost center as the output of the report..
    which tables shud i fetch from??
    and what is the logic??
    can sum1 plz provide the code??

    <b>now hw can i get cost elemnts of the cost center..</b>
       am not sure if this will work as all the key fields are not given in where condition, anyways chk our
      select single setname
               from setleaf
               where valfrom LE p_kostl and
                        valto GE p_kostl and
                        setclass eq '0101'.

  • Cost center retraction from BPS to R/3

    Hi All,
    I am trying to build a prototype model to check the functionality of cost center planning between SEM and R/3. We are trying to substitute the planning process from R/3 to BW.
    I am using standard cost center cube 0cca_c11 and switching between basic and transactional cubes. I have created planning function and set all the retraction parameters..
    BUSI I_BUSI
    CASE I_CASE
    DELTA DEL_BOOK
    MAPP KCD_REPID
    RFC_DEST RFCDEST
    TEST TEST_X
    ZARE I_COAR
    ZELM I_CELM
    ZTYP I_CTYP
    In the parameter group i have set the delta process
    Retr. R/3 Comp. 6
    Retractor Control 4
    Delta Update 0
    Sender str. Initially blank and later ZCOSTPLAN1
    Destination XXXXX
    Test 0 (Update)
    Controlling Area 01
    Cost Element 02
    CElem Category 03
    When i executed the parameter group initially with no sender structure, i get a log message that x records were read, 0 changed and 0generated.
    I created sender structure assigning UPB_RET_COPS as retraction target and referring the dictionary structure UPB_RET_COPS. When i tried to execute i keep getting error messages, i keep getting error message mapping could not be executed, sender structure not suitable for planning
    area defined.
    I am new to SEM and i would like to have some feedback. Do i need a sender structure if i would not like to do manipulation during extraction or if i need to have a sender structure how i should create my structure and make the values updated in R/3.
    Without the sender structure assigned i get success messages in the log ie 12 read 0 changed and 0 generated. With sender structure assigned i keep getting error messages.
    Your help is appreciated.
    Thanks

    Sorry, I missed to add a my observation that when execute the Planning function with some values in selection of either CRM element or WBS element, it is running fine. However when both are left balnk in the selections it is giving me this error. To handle this case, do we need any thing to transfer characteristics with unassigned values '#' ?
    Cheers,
    Ramz

  • ALE-Cost Center Data from ERP to HR

    Hello,
    I used BD64 to set message type COSMAS/COSFET.
    I used BD16 to transport cost center from ERP client to HR client, it succeeded.
    My  question is...
    When I create/change cost center on ERP client,
    are there any setting that ALE could be triggered automatically after I press SAVE button.
    Thanks!
    Regrads.

    Hi Vince,
    i'm not sure, because i have only a basis system at the moment.
    I think there is no message type but a BAPI ("Bank" with method "SaveReplica"), that you could add to your distribution model.
    Hope this helps.
    Regards
    Bernd

  • How to get cost center group from cost center

    Hello
    I have cost center and i need to get the cost center group.
    Anyone having an idea how to get it???
    Thanks
    Parvez

    Hi,
    Cost centre could be assigned to different cost centre groups. For standard hierarchy, you can retrieve it from CSKS table, but for other groups SETLEAF table (class 0101) will provide you a complete answer.
    Regards,
    Eli

  • Converting cost center field from mandatory to optional in Tcode CRC1

    Dear Experts,
             I'm a PP consultant & facing a problem regarding cost center .I'm trying to test a scenario into test server where trying to create a new resource(work center) via tcode CRC1(PP-PI).
    In the last screen (Costing), system is asking for the cost center which somehow couldn't be created.
    Now system is not allowing to complete the resource cretaion without entering cost center(as it is maintained as mandatory field).
    I want to change this setting of cost center from mandatory to optional for the sake of completeing the process (as it is being done into testing server only)
    Pls let me know the way by which i can convert this mandatory entry of cost center int Optional one.
    Thanks in advance ....

    Hi,
      To add to what Ajay has said:
    When you create a work center you are lead through various screens, the sequence depends on the work center category. You navigate with Next screen and Previous screen or, if you do not want to enter required data, skip."
    regards
    Waman

  • Unable to pick Cost Center picked from OM

    Hi,
    During payroll processing for a particular staff cost centre from OM is not picked and its blank. When I tried to enter same info under infotype 0027 its reflecting correctly. So I checked all OM config and postion linkage to Org unit etc. everything looks fine. For other staff in the same department there is no problem. I know problem looks funny. Could there be any missing link.

    Hi,
    i general cost center in payroll processing will be picked from PA infotypes IT0027 or IT0001.
    So you need to maintain the respective infotypes.and do check costecenter relationships

  • How to get Cost Center number from a Customer

    Hi Sap Experts,
    I have a customer number from xd03. But I would like to know which is the cost center used by this customer, how can I find that?
    Because I'm getting an warning message when using FB08, it points to the Tax Jurisdiction issue. I believe at some point, it's checking the Jurisdiction field of the cost center.
    Regards,
    CHL

    Hi,
    Thank you for the reply.
    The thing is, when I run FB08 for a specific document, i'm getting this warning Msg: Account assignment object has jurisdiction code XX, line iten XX AAAAAA.
    I checked already the configurations for jurisdiction code in customer master data and the path "define tax jurisdiction code" with spro.
    I noticed something, during the debug at some point its reading the cost center's jurisdiction number, and will compare it with customer's master data jurisdiction.
    But if there's no cost center it will process fine.
    It's in the program SAPLKAIP, form CostCenter_Check. Not sure if it's SAP standard code.
    Cheers.
    CHL

Maybe you are looking for

  • UIX: How to add linked view table columns to the Read-only table

    Hi I have two tables T1: ID, STAFF_ID, NOTE T2: STAFF_ID, USERNAME I have created corresponding entity objects (E1, E2), views (V1, V2), association A(E1->E2 as *..1 using STAFF_ID) and viewlink VL(V1->V2 as *..1 using association A). My model in App

  • Sharepoint 2013 and ADFS 3.0 Multi-Tenancy Problems

    Hi  I am hoping someone might be able to help with my scenario. Architectural Overview: We have a 3-Tier Sharepoint 2013 deployed. In this infrastructure we have the following Servers (1x ADFS server, 1x TMG Proxy for External Access, 2x Web Front-En

  • How to read directory and file

    I am being passed a vector which has information about a file with its directory path. I need to read the file and work on it .. how do I get to that.. Also the vector may have multiple entries and I need to go through all of them.. How do I go about

  • Problems with sound

    after some time sound card just stops working and I have to restart computer to have it working again aby idea

  • Low Quality on Imported AVI

    This is not a premiere elements issue, but I am using the software to create a project.  My problem deals with the quality of the video I took on vacation.  I inadvertently place the camera in a low resolution mode.  Although the video can be seen us