Accessing flash based memory device from mac osx

Hey there!
I have a flash memory based voice recorder (sony icd-p620) which is not mac compatible & I was wondering if there is a way to access the files.
Or is there a way just to grab everything on it & copy it over?
Thanks!

I was wondering if there is a way to access the files.
If there are no drivers for it, then chances are there's no way to access it.

Similar Messages

  • How do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

    how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

    Welcome to Apple Support Communities
    When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
    To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it

  • Files saved to iomega NAS device from Mac not visible to PCs

    I'm using my MacBook in a primarily Windows environment at work. We have an Iomega NAS device for our network file sharing.
    Some, but not all, of the files I save to the network share from my Mac are not visible to PCs. Am able to see all the files out there saved by the PCs via the Mac, but not all files saved by the Mac are visible by PCs (ie, they show up in Finder/Mac but not in Explorer/PC).
    Details:
    - Mac OS X 10.6.2
    - iomega StorCenter ix2 Network Storage Device (NAS)
    - Netgear Router (details unknown)
    All other network works fine from the Mac -- can see shared PCs, can use network attached printer, access the Internet, see all the shared folders on the NAS device.
    Happens with all types of files (MS Office documents, JPGs, GIFs, PDFs), but not for every documents. Probably 3 out of 4 documents saved to NAS device from Mac are visible to PCs on the network, and 1 out of 4 is not visible.
    Any ideas? Thanks.

    OS X 10.4.8 update has not altered the behavior of this bug. The Office 2004 11.30 update seems to have caused the problem to happen less frequently. I would say it now happens half as frequently.

  • Can I upgrade from mac OSX 10.6.8 to 10.8?

    Can I upgrade from mac OSX 10.6.8 to 10.8?

    Same list as stedman1, but uses model numbers which is slightly more accurate.
    Check that your computer is compatible with Mountain Lion.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    iMac (Mid 2007 or newer) model number 7,1 or higher
    MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    MacBook Air (Late 2008 or newer) model number 2,1 or higher
    Mac mini (Early 2009 or newer) model number 3,1 or higher
    Mac Pro (Early 2008 or newer) model number 3,1 or higher
    Xserve (Early 2009) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better)
    8 GB or more of available space
    Check to make sure your applications are compatible.         Application Compatibility
    If you have applications that you want to use that aren’t compatible, you can retain Snow Leopard and create a new partition to install Mountain Lion on or you can run Snow Leopard  server in a virtual mode.
    If your computer isn't compatible, you might be able to upgrade to Lion.        Computer Compatibility - Lion
    If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.

  • Error when starting Flash Builder 4.7 in Mac OSX Maverick

    I'm getting this error when I start Flash Builder 4.7 on Mac OSX Maverick.

    I solved it. The trick was to press the Install button. After a few minutes Flash Builder opened.

  • (cannot install on flash-based storage devices)

    Hello
    I am planning to install cs4 creative suite to my new pc WIN7
    that uses for c drive (operation system) a solid state disk (64 GB Kingston V-SERIES 2.5 SATA MLC-SSD)
    the question is this hard drive considered flash based storage device and i am going to have a problem
    with the istallation or it would be ok
    and if is a problem with it can i install the cs4 to my other hard drive that is mostly for data
    or cs4 has to be installed on the drive with the operation system
    Rgrds
    John

    Should be fine.
    Bob

  • Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater.  Update Not Verified?

    Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater.   Getting a message half way through the download stating the updated "could not be verified.  It may have been corrupted during downloading."   Any ideas for picking up the latest Update?
    Uploading screenshot....     any advice appreciated.
    Matt

    Either try redownloading or try downloading the standalone updater: OS X Lion Update 10.7.4 (Client Combo).
    Such errors may be caused by glitches in your Internet connection or because of hard drive problems. I suggest you try the following:
    Repair the Hard Drive and Permissions - Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • Cannot go to the Internet from Mac OSX, and Fedora Core 5

    All Windows users (XP, 2000, Vista Beta) can connect to the Internet no problem on WRT54G with Firmware v4.20.6 (may 26, 2005). But odd enough, though getting the right DHCP assigned IP addresses and DNS server address, MacBook Pro (OS 10.4.1) and Fedora Core 5 cannot go to the internet at all using Safari and firefox browsers: the message keeps saying that your computer is not connected to the internet. Tested with BOTH wired and wireless connections, no luck to the internet. So, it's not about the wireless settings and setup. It doesn't work even if I directly connect the CAT5 cable to the router port.
    Tested at wireless hotspots, at work where we have Cisco access points, and at a friend's place where there is netgear wireless router, MacBookPro is just working fine connected to the internet.
    Any suggestions? Linksys doesn't support Mac and Linux PCs at all?

    Thank you very much All (devildance, and Frank).
    Seems like it is working fine now...
    I reset the router as factory default, and reconfig the wireless setting(disable broadcasting SSID, configure TKIP PSK, and MAC filtering). Directly connected CAT5 cable from the router to my MacBookPro Windows XP. Working fine. Switched to Mac OSX, working fine. But, when I disconnected the LAN, and attempted to connect wireless, I couldn't go to the Internet using Safari and Firefox: keeps saying that your computer is not connected to the Internet.
    Still could ping to 4.2.2.2 and 207.232.22.25, but getting errors "could not resolve the host name" when I pinged with the hostname bearshare.com.
    Connected the wired CAT5. Working fine. Unplugged and used the wireless, could not get to the internet.
    Checked the NICs settings on both LAN ethernet and wireless airport. All seems the same and correct: IP address, subnetmask and gateway address, and NO DNS entry. The same settings, but works on LAN cat5, and not works with wireless. So, for the sake of it, just manually added the DNS server IP addresses and domain names on wireless NIC. And Wala...it is working fine with wireless. Still strange the fact that Ethernet LAN NIC still doesn't have any DNS entries and working fine, but required DNS entries on wireless NIC.
    For Fedora Core, could ping and resolve names without changing any settings. But when going to the Internet, got the error saying "comcast doesn't support this platform/OS" and another error "Welcome to Comcast High speed Internet....registration currently unavailable" when attempting to go any websites. Notieced that we pinging cnn.com, bearshare.com, or any websites, got ping reply from the same IP address which appears to be one of the comcast DNS server IP, 68.87.64.132.
    So, I think it is a comcast issue not supporting Linux or something else which I would need to call to Comcast about...
    But, thanks...looks like I can go to the Internet on Mac OSX, and Fedora core now with Linksys WRT54G. Thanks so much guys for all the suggestions....

  • IMac Memory Issues: "Your Mac OSX Startup Disk Has No More Space Available"

    Hi all,
    I've done some extensive searching on my issue, and haven't been able to find a solid solution.  I was hoping that if I shared my specific problem, it might shed some light on what is going on.  My OS is current:  10.8.2  with plenty of HD space (over 250 GB) and 4 GB ram.
    Over the past couple of days, my iMac has become very slow and laggy.  Most times I will eventually get the message:  "Your Mac OSX Startup Disk Has No More Space Available".  This is after it has been lagging for quite a while, sometimes several hours.
    I will restart, things will be sufficiently fast for a few minutes, but once I start working in any application (including any browser, or adobe software) it starts to slow down until it is eventually to a crawl, with the spinny wheel showing up often, even when only one application is open at a time.  It doesn't take more than several minutes to start slowing down.  Even simple things like hovering over the dock start to really lag, or opening my applications folder or System Preferences can take upwards of 15-30 seconds, even several minutes sometimes.
    Here's some steps I've taken so far:
    -  Checked the activity monitor and system memory seems fine.  No single app takes up more than 7% or so of memory at any given time.  1.65 GB active, 1.64 GB inactive, about 700 MB wired, free about 4 MB.  VM size is 247 GB, CPU also seems OK:  (%user around 10-20%, %System around 10%, Idle around 70-80%).  No single app seems to be taking up an excessive amount of Real Memory.
    -  Permissions repair (It found some things to fix, but never completely finished, seemed to freeze after several hours, tried it several times)
    -  Checked disk for repair (no problems found), did the S.M.A.R.T check and ran tests again using Onyx.
    -  Re-indexed Macintosh HD
    -  I saw a suggestion to reset the PRAM, so I did that.
    I do have the system backed up via Time Machine.  Suggestions for further action are very much appreciated!

    Ok, thanks.  Here's a screenshot from during when it was running to a near halt (took me a while even to take the screenshot):
    Here's a second screenshot after restart.  All I did was open Chrome to post this:
    At this exact moment I have about 500MB of memory free, but I have been watching it slowly count down starting from 2GB free when I first restarted.  So far it is running smoothly, but I am guessing that it will start to lag again once the free memory dials down.
    In case there is any correlation:  I happened to have a strange issue with my internet connection.  My router seems to be working fine, and I have wi-fi connected around the house.  However, I did have my iMac connected via ethernet cable, and the wired connection was not working (was not finding a DNS address), but when I go to Wi-fi, it works.  Again, could be totally unrelated, but it started just before the slowdown.

  • Cannot access in a shared folder on Mac OsX Lion Server

    Hello, i've a strange issue with Mac Os X Server 10.7 :
    i created an shared folder, grant r/w permission to everyone group, but when i try to access to him from Pc with windows7 ask me te credential, however if i logon with a registered Mac OSx account it refuse the connection, obviously when connect to this shared folder from Mac i've no problem, of course...
    Someone can help me?
    Thanks Riccardo.

    Maybe someone in the Lion Server Forum would know the answer?
    Regards,
    Colin R.

  • I'm having an issue on All ADOBE reader/flasher player opening window on Mac OSX Lion

    I have tons of error when i'm openning Adobe reader/Adober flash player/Adobe application manager. When i went check out the Library/Adobe appiication support, it's missing and i can't get it to open. What are the solution to make this work. Cause i really wanna to download Adobe photoshop trial install and open it, but i keep on getting error all the time. What can i do to resolve this issue on my mac osx Lion 10.7.5 version? Any suggestion?

    Could you try switching back to the PPAPI version of the plugin to see if that helps (reversing the steps outlined in the FAQ below)?  From what we've learned, this only effects the NPAPI version and the PPAPI version should display fonts correctly.
    Enable system Flash Player in Google Chrome | Windows | Mac
    We are working with Google to get this fixed asap.
    Thanks,
    Chris

  • Erasing a device from Mac

    How do I erase an iPod device from my Mac? (I can only update three devices so wish to remove one which has been updated previously.)

    It will only erase the phone and remove it from the iCloud account.  It won't erase the iCloud account itself.  If it's your iCloud account with your email address and credentials (and not the company's), you will be able to sign into the account on your new phone.  (If the account belongs to the company, they will probably delete the data in the account and/or reset the password so it can no longer be accessed by you.)

  • How to delete old provisioning profiles from mac OSX lion

    hi everyone
    i want to delete my old provisioning profiles
    i did it from prgarnizer of xcode but it give me error when i run app on iphone
    "This provioning profile have no valid signature"
    i search about it then get to know that it store in
    library->mobiledevices-provisioning profile folder
    but i had a problem i.e my mac mini with mac osx lion 10.7.2 don;t have that directory
    so please let me know that where it is in that
    thanks in advance

    Use Organizer via Xcode and then on your device, use Settings/General/Profile....delete.
    See the walk-thru in TN 2250 - 'Perform Common Tasks' as well...

  • D3D depth issue and D2D render flash after update device from Lumia Black to Lumia Denim

    Hi,
    Yestoday I updated my lumia 929 device from Lumia Black to Lumia Denim. I develope game on this device.
    My game is D2D and D3D Interop with silverlight 8.1 program. Then problem occured. The depth of 3D objects become wrong. And the d2d content will flash time to time. I use d2d to render text.
    However, I solved the depth problem by setting up DepthStencilState. But the d2d content flash problem doesn't solved. 
    Not only Lumia 929, but 930, 638 and many devices.
    In lumia 525 and 520t, my game still works fine.
    Can anyone help me ?
    Any help will be appliciated, thank you.

    Hello,
    Can you provide more detail concerning how you are rendering your text with D2D? Are you doing the D2D update on the UI thread? I think we just need more detail before we can offer any suggestions.
    Thanks,
    James
    Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/
    Hi, thank you for your reply.
    What do you mean D2D update?I draw D2D content on the UI thread.
    I render text like below
    void YHMText::DrawCustom(wstring str, float scale, float posX, float posY, float layoutX, float layoutY, float opacity, float rotationAngle, int colorID)
    mText = str;
    if (mIsResourceLoaded && opacity > 0.0f)
    mText = str;
    DX::ThrowIfFailed(m_dwriteFactory->CreateTextLayout(mText.c_str(), (uint32) mText.length(), mTextFormat.Get(), layoutX / scale, layoutY / scale, &mTextLayout));
    DWRITE_TEXT_RANGE range = { 0 };
    range.length = static_cast<uint32>(mText.length());
    DX::ThrowIfFailed(mTextLayout->SetFontCollection(mFontCollection.Get(), range));
    #ifdef YHMWINRT
    Windows::Foundation::Size logicalSize = mDeviceResources->GetLogicalSize();
    #endif
    #ifdef YHMSILVERLIGHT
    Windows::Foundation::Size logicalSize = mDeviceResources->GetRenderTargetSize();
    #endif
    float dpiScale = 1.0f;
    #if (NTDDI_VERSION == NTDDI_WIN8)
    dpiScale = 96.0f / mDeviceResources->GetDPI();
    #endif
    D2D1::Matrix3x2F screenTranslation;
    D2D1::Matrix3x2F screenScale;
    D2D1::Matrix3x2F globelScale = D2D1::Matrix3x2F::Scale(scale, scale);
    D2D1_POINT_2F center;
    center.x = posX * logicalSize.Width / 1920.0f * dpiScale;
    center.y = posY * logicalSize.Height / 1080.0f * dpiScale;
    D2D1::Matrix3x2F rotation = D2D1::Matrix3x2F::Rotation(rotationAngle, center);
    if (gScreenMode == YHMScreenMode::Portrait)
    screenTranslation = D2D1::Matrix3x2F::Translation(posX * logicalSize.Width / 1080.0f * dpiScale, posY * logicalSize.Width / 1080.0f * dpiScale);
    screenScale = D2D1::Matrix3x2F::Scale(logicalSize.Width / 1080.0f * dpiScale, logicalSize.Width / 1080.0f * dpiScale);
    if (gScreenMode == YHMScreenMode::Landerscape)
    screenTranslation = D2D1::Matrix3x2F::Translation(posX * logicalSize.Width / 1920.0f * dpiScale, posY * logicalSize.Height / 1080.0f * dpiScale);
    screenScale = D2D1::Matrix3x2F::Scale(logicalSize.Width / 1920.0f * dpiScale, logicalSize.Height / 1080.0f * dpiScale);
    m_d2dContext->SetTransform(screenScale * globelScale * screenTranslation * mDeviceResources->GetOrientationTransform2D() * rotation);
    DX::ThrowIfFailed(mTextFormat->SetTextAlignment(mTextAlignment));
    mDeviceResources->BeginDrawD2D();
    mBrush[colorID]->SetOpacity(opacity);
    m_d2dContext->DrawTextLayout(D2D1::Point2F(0.f, 0.f), mTextLayout.Get(), mBrush[colorID].Get(), D2D1_DRAW_TEXT_OPTIONS_NO_SNAP);
    mBrush[colorID]->SetOpacity(1.0f);
    mDeviceResources->EndDrawD2D();
    This works fine with Lumia Black. But in Lumia Denim, my d2d text may flash.
    I noticed that the flash problem usually occured when D3D content draw first. In my render methods, d3d content and d2d content are place together.

  • Problems to download music from Mac OSX 10.4.11 to iPhone 4

    Hi to you all
    Since few days I am an owner of an iPhone 4. And also I have Mac with OSX 10.4.11 at home. Well, if I connect my iPhone to Mac to synch music from Mac to iPhone 4, the iPhone get not recognized and I am therefore not able to get my music from Mac on my iPhone.
    During update on Mac, I got the error message on OS is telling "Installing iTunes.pkg could not completed, this package needs Mac OSX 10.5.
    If I search on Mac for new update, it says "your system is updated and there is no other update available"
    With other words, I can not get higher release on Mac why I am not able to get a new version of iTunes on Mac and therefore why I am not able to synch my music from Mac to iPhone. Very frustrating.
    Any advise is welcome.
    Thank you.

    You will need to upgrade your version of OS on your Mac. You will need Leopard (10.5.8) or Snow Leopard (10.6.X)
    Stedman

Maybe you are looking for