Accessing Flash in SWT Browser

Let me preface this with my setup. I am running Eclipse 3.1
on WinXp Home and using the Eclipse flex plugin. On my first
attempt at installing I got FP9 installed and the system asked for
a reboot, I started Eclipse after the reboot but there was no sign
of any Eclipse plugins ( I can't remember if Eclipse was running
during my first install, that might have been a problem though
there was no prompt to close it if it was). I then clicked the
install again and ran through it once more without installing FP9
so it would keep going. Finally I got the plugin installed. Now
onto my problem.
I open the Flex Start Page in Eclipse and click on the "Run
Flex Compnent Explorer", the page loads with the side bar and two
blank frame. I click on a link in the sidebar and the browser
prompts me to install flash 8. I click 'yes' to install and the
frame goes from empty to a coloured background but that's all. Each
time I click on a link in the side bar I get prompted again to
install Flash 8. And on it goes. How do I fix this? I have looked
every where for an answer and have yet to find one that helps.
Cheers,
Stuart.

Hi,
> Let me preface this with my setup. I am running Eclipse
3.1 on WinXp Home and
> using the Eclipse flex plugin. On my first attempt at
installing I got FP9
> installed and the system asked for a reboot, I started
Eclipse after the reboot
> but there was no sign of any Eclipse plugins ( I can't
remember if Eclipse was
> running during my first install, that might have been a
problem though there
> was no prompt to close it if it was). I then clicked the
install again and ran
> through it once more without installing FP9 so it would
keep going. Finally I
> got the plugin installed. Now onto my problem.
>
> I open the Flex Start Page in Eclipse and click on the
"Run Flex Compnent
> Explorer", the page loads with the side bar and two
blank frame. I click on a
> link in the sidebar and the browser prompts me to
install flash 8. I click
> 'yes' to install and the frame goes from empty to a
coloured background but
> that's all. Each time I click on a link in the side bar
I get prompted again to
> install Flash 8. And on it goes. How do I fix this? I
have looked every where
> for an answer and have yet to find one that helps.
The problem is that you need Flash Player 9 installed to view
the
Component Explorer. It sounds like FP9 didn't get installed
successfully the first time around. (Since the official
version of FP9
isn't available, the autodownload from Adobe autodownloads
FP8, which
won't help.)
To check this, go to any page with a Flash movie on it (like
the Adobe
home page), right-click on the movie, and see what the
"About" entry
says. If it doesn't say "About Flash Player 9...", then you
don't have
the right version installed. If so, you can try running the
installer
again to see if it installs FP9 successfully, or you can try
the
standalone FP9 installer at:
http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs#flashplayer9
Thanks.
nj
Flex Builder team

Similar Messages

  • Trying to access Flash Player Settings Manager always asks to install but I already have it installe

    I am trying to access Flash player website settings manager.  I link from a browser to the settings manager but instead of a panel there is a download required to get latest Flash Player which I already have.  I download it successfully. Windows 7 control panel has Adobe Flash Player 11 ActiveX 64-bit. When I link again, I get the same message to download flash player as if I never did it before.  What am I missing? There is also Flash Player (32-bit) icon that invokes Flash Player settings manager.Is this the best I can do to get the website storage settings?  My ultimate goal is to remove Flash player cookies which I learned about today to be a problem. Thanks.

    I am trying to access Flash player website settings manager.
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l
    I link from a browser to the settings manager but instead of a panel there is a download required to get latest Flash Player which I already have.
    I have no idea what you are talking about.  Just at what site are you getting this message to download instead of the settings panel?
    My ultimate goal is to remove Flash player cookies which I learned about today to be a problem. Thanks.
    If you want to temporarily remove Flash Player LSO's(cookies), just delete the browser's temporary files.  If you want to permanently remove LSO's, go to your control panel and activate the Flash Player Settings Manager.  Change the Local Storage Settings to Block all sites from storing information on this computer.  However, most sites with Flash Player videos will not work with this setting.

  • When I try to watch certain videos on my ipad2 it says Thanks for trying to access Flash Player. Unfortunately it is not available for your device because of restrictions that Apple has put in place.  Can any tell me what app I can download to replace it.

    When I try to watch certain videos on my ipad2 it says Thanks for trying to access Flash Player. Unfortunately it is not available for your device because of restrictions that Apple has put in place.  Can any tell me what app I can download to replace adobe flash player.
    Thanks

    Use the iSwifter browser from the app store. Works for most flash content.

  • How to access the Web Service Browser

    Hi,
    I need to access the Web Service Browser to generate a Web Service Description.
    How can I do it?
    I use the follow url:
    http://<host_name>:<port_number>/sap/bc/bsp/sap/WebServiceBrowser/search.html?sap-client=<relevant_client>
    but I can't say how to determine values for the three placeholders.
    Help me please.
    THANKS

    Hi Andrea,
    you can access the web services in sap transaction SICF. Then right click on the
    service and choose "test". The hostname is the host on where the sap system
    runs.
    The port ´number can be seen in transaction SMICM -> shift + F1. Here you can see
    the portnumer assigned to the HTTP protocol.
    And the client is the sap client (standard client) for which the service is configured.
    Hope this helps.
    KR,
    Andreas

  • Problem accessing mail via Safari browser

    How do I access iCloud Mail via my Safari browser on my iPhone? If I go to iCloud.com it just offers me the option to install it on my phone.
    The problem is, I already have it installed on my phone and it works fine EXCEPT at my new job - the wifi is not very good and I can access internet/Facebook etc but every time I try and load email it always says it 'cannot find the server .' I therefore tried to access email via safari browser - my other email provider works fine that waybut iCloud doesn't even give me the option to login, just keeps suggesting I install it.
    Any ideas how I can check iCloud email at work? Can't do it on work computers, site is blocked....and there is no 3G/4G signal.
    Thanks for any advice!

    According to http://support.apple.com/kb/PH2618 you should be able to access it via a browser by going to https://www.icloud.com/#mail

  • Flash content blank and unable to access flash control panel to turn off hardware acceleration.

    Flash content appears as blank and nothing happens when attempting to access flash player settings. Not sure if it helps, but the operating system is Mac OS X Mavericks running in virutal machine.
    * QuickTime
    * Shockwave Flash 14.0 r0
    * Displays Java applet content, or a placeholder if Java is not installed.

    Hi 薛定谔的老猫,
    On your [about:addons] page, please select "Always Activate" for the Flash player.
    *If it is crashing: [[Send plugin crash reports to help Mozilla improve Firefox]]
    *Please also try to reload the page after you change this setting.
    * Also try to reinstall Flash.
    Please post back with your results, it can help other users.

  • Error in trying to access my FORM via browser

    Hi, I am new to Oracle Application Development, as a starter I created a sample form in Form builder and compiled it, let say TESTFORM.fmx
    I have placed this file in [ C:\DevSuiteHome_1\forms ] as my default location in "default.env" file is this only.
    Then I created a tag in "formsweb.cfg" as:
    #ETA Report
    [TESTFORM]
    envfile=default.env
    form=TESTFORM.fmx
    userid=i-----r/i----r@xii
    widith=1500
    height=600
    imagebase=codbase
    archive_jini=frmall_jinit.jar,colorpicker.jar,keyfilter.jar,my_icons.jar
    archive=frmall.jar
    When I try to access it via my browser [IE6] by going to link: http://pptaw0054.lotte-ppta.com:8889/forms/frmservlet?config=TESTFORM
    A grey box of 1500x600 is shown with an error shown in the center: java.lang.ClassNotFoundException: oracle.forms.engine.Main_
    Can anyone please help me out with the problem.
    Thankyou!

    Hi Check these -
    1. Check these URL's are working
    http://pptaw0054.lotte-ppta.com:8889/forms/frmservlet
    http://pptaw0054.lotte-ppta.com:8889/forms/lservlet
    2.If Webutil installed? Then do proper configuration for "WebutilArchive"
    WebutilArchive=frmwebutil.jar,jacob.jar
    3.If Jinitiator is used,check if all corresponding jar files are downloaded onto user machine.Because all required class as shown in the error are there in jinitiator jar files.Also check all jar files that you have mentioned in archive_jinit are downloaded onto user machine.
    DO like this if using webutil archive_jini=frmall_jinit.jar,colorpicker.jar,keyfilter.jar,my_icons.jar,frmwebutil.jar,jacob.jar
    4.Enable all activex settings of your browser and do a proxy bypass setting in the browser as well..
    5. Check if you have download rights for downloading JAR files mentioned in archive_jini
    Edited by: anandk on Jul 24, 2012 1:18 PM

  • Can't access hotmail account from browser. cerficiate untrusted

    Can't access hotmail account from browsing, I tried to log into my hotmail account by visiting www.live.com and log into my account (add e-mail address and password) when sign in i get a message saying:There was a problem establishing asecure connection.( I get two tabs Details and Stop) I click on Detials I get another message saying: server Certificate Error. untrusted certificate,unable to determine the certificate origin, This has been disallowed by your administrator.. When i press on option Stop i get e message saying: refussing connection.This server has beed previously supporting HTTP Strict Transport Security. Due to SSL certificate warning/errors, a connection will not be made. Please could anybody help me.. I contact Vodafone they said it's microsoft issue then the latter said it's blackberry problem. i have tried everything nothing seems to work.. I don't want to register my hotmail account on my BB, but i want to access it through browsing as i do on my PC.. I will be really gratful.. thank you
    Solved!
    Go to Solution.

    Ggggrrrr, i really hope that's wrong, i would also be moving away from BB sharpish if that's the case. Hoping someone cleverer than me can come up with a solution, the BB manual certainly doesn't help. Like the first poster I have tried getting vodafone to help and also hotmail, both without success.

  • How do I resize my flash to fit browser? Help plz

    Yes I searched but none of the answers I saw made any sense so how do I make my flash fit any browser? like I made it 1280x800 to fit mine and then how do I make it fit a bigger or small one eg. 1800x1200?

    There's is a way to do it? Flash Builder?
    Basicaly, this is what i want: www.parasuco.com (resize the browser to see!)
    Thanks!

  • How to temporaly switch off flash in opera browser?

    How to temporaly switch off flash in opera browser?

    Not too sure there's a way to turn flash off temporarily. You
    will have to uninstall it and then reinstall it when you want it
    again.

  • How do I access flash after downloading it?

    How do I access Flash after downloading it to my PC

    Double click the program icon is what works for me

  • Unable to access CMC through web browser

    Hi All,
    I have a BOXI3.1 Windows install on a VM server. Install is up and running and I can access the CMC via Start menu on the server. When I attempt to access the CMC via browser on a remote computer it fails with a "IE cannot display the webpage" error message.
    I have tried http://alias:8080/cmcapp, http://servername:8080/cmcapp and http://IP address:8080/cmcapp, but all fail.
    Is there a server setting or a BO setting that must be changed?
    Thanks in advance for you help!

    Hi Scott,
    The communication should be two way communication. In both machine host entries the other machine details with hostname should be entered. Try this way should work and if any firewall configured please allow both the machines to communicate.
    If this doesn't work then check for the following:
    In VM there is an option configured to Ethenet called Host Only entry turned it to bridged will solve the problem.
    Regards,
    Pawan

  • How can I access my favorites by browser at other locations?

    How can I access my favorites by browser at other locations?

    Hi!
    In order to use the advantages of Firefox Sync you need to configure it in every device that you intent to use it. If you want to have access to your bookmarks without synching them you can use some of the add-ons that you can find in the [http://addons.mozilla.org http://addons.mozilla.org] site.
    In any case, if the devices are yours, I would encourage you to take a couple of minutes and set up Firefox Sync in all of them. That way you would be able to sync not only your favorite bookmarks but also your tabs, browsing history, passwords, etc in a really secure and private way.

  • Cannot access Siebel application through browser

    Hi,
    We have installed Siebel demo quickstart SIA 8.1.1 in one laptop.The Siebel application works fine. The only problem is that we cannot access the Siebel application through a browser. We have to launch the Siebel application from Windows program menu.We need to set up the Siebel application so that we can access it through IE browser. There are some settings that need to be set up in the .cfg files to make the application available trough Internet Explorer.
    We have already tried using the url http://servername:8081/callcenter_enu/start.swe? But it returns "page cannot be displayed". We are accessing the application from the host computer.
    Regards
    CP

    Are you able to connect with dedicate client?
    if yes, then you just to need to verify setting/configuration for web server. Which can be found in installation guide.
    Also could you please share logs. Error you are getting is quite generic and have multiple symptoms.
    Have you tried to search on Oracle Support. There is complete article available for this error.
    Regards,
    Rajesh Kumar

  • How 2 access flash drives via iphone..(just an idea)

    guys im jus gona give idea or a new concept 4 the iphone4 ie a new feature which can be included in the future..what does the iphone doesn't have when compared to the mac book.??..a"USB port"..i have designed a cable such that in one end its a mini usb male pin and on the other end its a normal usb female pin...so if there is a female pin usb port in the iphone...and with some upgradation in the software(os)
    ..it will help accessing flash drives,memory cards..etc..the data transfer port which is now used in the iphone can also be transformed.."my main idea is to access flash drives"...im sure tat apple engineers r brainy enough 2 come up wit this concept in some other way...

    Firstly, you will have to buy more equipment as the Express doesn't support extra drives.
    If you can use BTMM, then the Time Capsule is good, or the AirPort Extreme. However, these don't offer a web interface to access them, or a way of accessing them from iOS.
    Synology NASes might work, or if you want to mess around a Raspberry Pi. Possibly even a Mac mini if you have the cash to spend.

Maybe you are looking for