Accessing floppy disk in Solaris 10 u5 VirtualBox Virtual Machine

Hi,
I cannot access my host floppy drive from my Solaris 10 u5 x86 64-bit VM on a WinXP host using VirtualBox 2.1.0. When I select "Mount Floppy A: from the VM window, the floppy is apparently mounted, as I can see disk activity. However, no floppy icon comes up on my Desktop, there is no /floppy, and I can't otherwise find the "mounted" drive.
I can access CD-ROMs using my VM with no problem: a CD-ROM icon appears on my Desktop.
Can anyone else using Solaris 10 as a guest on a Windows host access their floppy drives?
Any help would be greatly appreciated. I have asked this question in the Vbox forums, but evidently only a couple of users use SUN Vbox for Solaris guests, which I find remarkable.
Thanks.

I finally got the Solaris 10 VM to recognize the floppy. ACPI must be enabled for the guest. See:
http://forums.virtualbox.org/viewtopic.php?f=4&t=13599

Similar Messages

Accessing physical floppy disk drive from Windows 8.1 host machine to Windows XP SP3 hyper-v?

Hi there!
Could someone help up me? I just wanted to ask if it's possible for a hyper-v to access a physical "floppy diskette" drive?
Here's my setup: I have a Windows 8.1 as my host and Windows XP SP3 as the virtual machine. I would need to access the contents of the physical floppy diskette drive from the Windows XP SP3 vm. This is needed, because, currently our customer is still using
floppy disk drives, to most of their in-house applications. I tried to open Drive A: inside Windows XP SP3 VM while the physical diskette from the Windows 8.1 is inserted. But then again, it cannot directly access the contents. Also, I tried to use "virtual
floppy drives" and copy the files from the diskette. But for some reason, their applications do not support it. I did check device manager in Windows XP SP3 vm, but i cannot see the "Universal Serial Bus Controllers" option inside the VM.
Please help!!! Thank you!
All the best,
MS CAMPer

HI Carey, thanks for this, But this is under System Center Virtual Machine Manager. I already saw this a while ago.
Anyway, is there a way for Windows XP VM to access a physical floppy diskette drives inserted to Windows 8.1 host machine? I dont intend to use Virtual floppy disks. Only Physical ones.
Please please. Need your help guys! :( Thank you!

[VirtualBox]Virtual machine doesn't run anymore

Good morning,
today is my b-day and VirtualBox thought he could make me a present; he has chosen to not run my VMs anymore. ANY of them (even if I really need only one for university).
I'm desperated, it happened other times in these days, 4.3.16 never worked for me, but i've seen that 4.3.16-2 was released and I tried it.It didn't work, here's the log file.
VirtualBox VM 4.3.16_OSE r95972 linux.amd64 (Sep 10 2014 20:13:24) release log
00:00:00.285603 Log opened 2014-09-19T09:22:28.081277000Z
00:00:00.285604 Build Type: release
00:00:00.285606 OS Product: Linux
00:00:00.285607 OS Release: 3.16.3-1-ARCH
00:00:00.285607 OS Version: #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014
00:00:00.285618 DMI Product Name: System Product Name
00:00:00.285622 DMI Product Version: System Version
00:00:00.285661 Host RAM: 7915MB total, 7055MB available
00:00:00.285663 Executable: /usr/lib/virtualbox/VirtualBox
00:00:00.285663 Process ID: 2194
00:00:00.285664 Package type: LINUX_64BITS_GENERIC (OSE)
00:00:00.296993 Installed Extension Packs:
00:00:00.297003 Oracle VM VirtualBox Extension Pack (Version: 4.3.6 r91406; VRDE Module: VBoxVRDP)
00:00:00.299479 UIMediumEnumerator: Medium-enumeration finished!
00:00:00.299658 Using XKB for keycode to scan code conversion
00:00:00.305771 SUP: Loaded VMMR0.r0 (/usr/lib/virtualbox/VMMR0.r0) at 0xffffffffa1153020 - ModuleInit at ffffffffa11713f0 and ModuleTerm at ffffffffa1171700
00:00:00.305795 SUP: VMMR0EntryEx located at ffffffffa1172920, VMMR0EntryFast at ffffffffa11724a0 and VMMR0EntryInt at ffffffffa1172490
00:00:00.306821 Guest OS type: 'Windows81_64'
00:00:00.309343 Enabling CMPXCHG16B for Windows 8.1 / 2k12 guests
00:00:00.309830 fHMForced=true - Lots of RAM
00:00:00.309836 fHMForced=true - SMP
00:00:00.309838 fHMForced=true - 64-bit guest
00:00:00.315533 File system of '/mnt/virtualbox/Windows/Snapshots' (snapshots) is ext4
00:00:00.315544 File system of '/mnt/virtualbox/Windows/Windows.vdi' is ext4
00:00:00.316088 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={431685da-3618-4ebc-b038-833ba829b4b2} aComponent={ExtPack} aText={Failed to locate the module 'VDPluginCrypt' in extension pack 'Oracle VM VirtualBox Extension Pack'}, preserve=false
00:00:00.323437 Shared clipboard mode: Bidirectional
00:00:00.326617 Drag'n'drop mode: Off
00:00:00.335424 ************************* CFGM dump *************************
00:00:00.335426 [/] (level 0)
00:00:00.335429 CSAMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.335431 CpuExecutionCap <integer> = 0x0000000000000064 (100)
00:00:00.335432 EnablePAE <integer> = 0x0000000000000000 (0)
00:00:00.335433 HMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.335433 MemBalloonSize <integer> = 0x0000000000000000 (0)
00:00:00.335434 Name <string> = "Windows" (cb=8)
00:00:00.335435 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.335436 PATMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.335437 PageFusion <integer> = 0x0000000000000000 (0)
00:00:00.335437 RamHoleSize <integer> = 0x0000000020000000 (536 870 912, 512 MB)
00:00:00.335439 RamSize <integer> = 0x0000000100000000 (4 294 967 296, 4 GB)
00:00:00.335440 RawR0Enabled <integer> = 0x0000000000000001 (1)
00:00:00.335441 RawR3Enabled <integer> = 0x0000000000000001 (1)
00:00:00.335441 TimerMillies <integer> = 0x000000000000000a (10)
00:00:00.335442 UUID <bytes> = "5e c4 73 0a 75 73 23 41 a7 c0 84 f4 80 95 6b 24" (cb=16)
00:00:00.335445
00:00:00.335446 [/CPUM/] (level 1)
00:00:00.335447 CMPXCHG16B <integer> = 0x0000000000000001 (1)
00:00:00.335447 SyntheticCpu <integer> = 0x0000000000000000 (0)
00:00:00.335448
00:00:00.335449 [/DBGF/] (level 1)
00:00:00.335449 Path <string> = "/mnt/virtualbox/Windows/debug/;/mnt/virtualbox/Windows/;/home/mons/" (cb=68)
00:00:00.335450
00:00:00.335450 [/Devices/] (level 1)
00:00:00.335451
00:00:00.335451 [/Devices/8237A/] (level 2)
00:00:00.335452
00:00:00.335453 [/Devices/8237A/0/] (level 3)
00:00:00.335453 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335454
00:00:00.335454 [/Devices/AudioSniffer/] (level 2)
00:00:00.335455
00:00:00.335456 [/Devices/AudioSniffer/0/] (level 3)
00:00:00.335456
00:00:00.335457 [/Devices/AudioSniffer/0/Config/] (level 4)
00:00:00.335458
00:00:00.335458 [/Devices/AudioSniffer/0/LUN#0/] (level 4)
00:00:00.335459 Driver <string> = "MainAudioSniffer" (cb=17)
00:00:00.335460
00:00:00.335460 [/Devices/AudioSniffer/0/LUN#0/Config/] (level 5)
00:00:00.335461 Object <integer> = 0x00007fcc24007eb0 (140 514 754 068 144)
00:00:00.335462
00:00:00.335463 [/Devices/VMMDev/] (level 2)
00:00:00.335463
00:00:00.335464 [/Devices/VMMDev/0/] (level 3)
00:00:00.335465 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.335465 PCIDeviceNo <integer> = 0x0000000000000004 (4)
00:00:00.335466 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.335467 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335467
00:00:00.335468 [/Devices/VMMDev/0/Config/] (level 4)
00:00:00.335468 GuestCoreDumpDir <string> = "/mnt/virtualbox/Windows/Snapshots" (cb=34)
00:00:00.335469 RamSize <integer> = 0x0000000100000000 (4 294 967 296, 4 GB)
00:00:00.335470
00:00:00.335471 [/Devices/VMMDev/0/LUN#0/] (level 4)
00:00:00.335472 Driver <string> = "HGCM" (cb=5)
00:00:00.335472
00:00:00.335472 [/Devices/VMMDev/0/LUN#0/Config/] (level 5)
00:00:00.335473 Object <integer> = 0x00007fcc08000930 (140 514 284 276 016)
00:00:00.335474
00:00:00.335475 [/Devices/VMMDev/0/LUN#999/] (level 4)
00:00:00.335476 Driver <string> = "MainStatus" (cb=11)
00:00:00.335476
00:00:00.335477 [/Devices/VMMDev/0/LUN#999/Config/] (level 5)
00:00:00.335478 First <integer> = 0x0000000000000000 (0)
00:00:00.335478 Last <integer> = 0x0000000000000000 (0)
00:00:00.335479 papLeds <integer> = 0x00007fcc24003860 (140 514 754 050 144)
00:00:00.335480
00:00:00.335480 [/Devices/acpi/] (level 2)
00:00:00.335481
00:00:00.335481 [/Devices/acpi/0/] (level 3)
00:00:00.335482 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.335483 PCIDeviceNo <integer> = 0x0000000000000007 (7)
00:00:00.335483 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.335484 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335485
00:00:00.335485 [/Devices/acpi/0/Config/] (level 4)
00:00:00.335486 CpuHotPlug <integer> = 0x0000000000000000 (0)
00:00:00.335487 FdcEnabled <integer> = 0x0000000000000000 (0)
00:00:00.335488 HostBusPciAddress <integer> = 0x0000000000000000 (0)
00:00:00.335488 HpetEnabled <integer> = 0x0000000000000000 (0)
00:00:00.335489 IOAPIC <integer> = 0x0000000000000001 (1)
00:00:00.335490 IocPciAddress <integer> = 0x0000000000010000 (65 536)
00:00:00.335490 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.335491 RamHoleSize <integer> = 0x0000000020000000 (536 870 912, 512 MB)
00:00:00.335492 RamSize <integer> = 0x0000000100000000 (4 294 967 296, 4 GB)
00:00:00.335494 Serial0IoPortBase <integer> = 0x0000000000000000 (0)
00:00:00.335494 Serial0Irq <integer> = 0x0000000000000000 (0)
00:00:00.335495 Serial1IoPortBase <integer> = 0x0000000000000000 (0)
00:00:00.335496 Serial1Irq <integer> = 0x0000000000000000 (0)
00:00:00.335496 ShowCpu <integer> = 0x0000000000000001 (1)
00:00:00.335497 ShowRtc <integer> = 0x0000000000000000 (0)
00:00:00.335498 SmcEnabled <integer> = 0x0000000000000000 (0)
00:00:00.335498
00:00:00.335499 [/Devices/acpi/0/LUN#0/] (level 4)
00:00:00.335500 Driver <string> = "ACPIHost" (cb=9)
00:00:00.335500
00:00:00.335500 [/Devices/acpi/0/LUN#0/Config/] (level 5)
00:00:00.335501
00:00:00.335502 [/Devices/acpi/0/LUN#1/] (level 4)
00:00:00.335503 Driver <string> = "ACPICpu" (cb=8)
00:00:00.335503
00:00:00.335503 [/Devices/acpi/0/LUN#1/Config/] (level 5)
00:00:00.335505
00:00:00.335505 [/Devices/acpi/0/LUN#2/] (level 4)
00:00:00.335506 Driver <string> = "ACPICpu" (cb=8)
00:00:00.335506
00:00:00.335506 [/Devices/acpi/0/LUN#2/Config/] (level 5)
00:00:00.335507
00:00:00.335508 [/Devices/acpi/0/LUN#3/] (level 4)
00:00:00.335509 Driver <string> = "ACPICpu" (cb=8)
00:00:00.335509
00:00:00.335509 [/Devices/acpi/0/LUN#3/Config/] (level 5)
00:00:00.335510
00:00:00.335511 [/Devices/ahci/] (level 2)
00:00:00.335512
00:00:00.335512 [/Devices/ahci/0/] (level 3)
00:00:00.335513 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.335514 PCIDeviceNo <integer> = 0x000000000000000d (13)
00:00:00.335514 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.335515 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335515
00:00:00.335516 [/Devices/ahci/0/Config/] (level 4)
00:00:00.335517 Bootable <integer> = 0x0000000000000001 (1)
00:00:00.335517 PortCount <integer> = 0x0000000000000002 (2)
00:00:00.335518
00:00:00.335518 [/Devices/ahci/0/Config/Port0/] (level 5)
00:00:00.335519 Hotpluggable <integer> = 0x0000000000000000 (0)
00:00:00.335520 NonRotationalMedium <integer> = 0x0000000000000001 (1)
00:00:00.335521
00:00:00.335521 [/Devices/ahci/0/Config/Port1/] (level 5)
00:00:00.335522 Hotpluggable <integer> = 0x0000000000000000 (0)
00:00:00.335523 NonRotationalMedium <integer> = 0x0000000000000000 (0)
00:00:00.335523
00:00:00.335524 [/Devices/ahci/0/LUN#0/] (level 4)
00:00:00.335525 Driver <string> = "Block" (cb=6)
00:00:00.335525
00:00:00.335525 [/Devices/ahci/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.335526 Driver <string> = "VD" (cb=3)
00:00:00.335527
00:00:00.335527 [/Devices/ahci/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.335528 BlockCache <integer> = 0x0000000000000001 (1)
00:00:00.335529 Format <string> = "VDI" (cb=4)
00:00:00.335530 Path <string> = "/mnt/virtualbox/Windows/Windows.vdi" (cb=36)
00:00:00.335530 Type <string> = "HardDisk" (cb=9)
00:00:00.335531 UseNewIo <integer> = 0x0000000000000001 (1)
00:00:00.335531
00:00:00.335532 [/Devices/ahci/0/LUN#0/Config/] (level 5)
00:00:00.335533 Mountable <integer> = 0x0000000000000000 (0)
00:00:00.335533 Type <string> = "HardDisk" (cb=9)
00:00:00.335534
00:00:00.335534 [/Devices/ahci/0/LUN#1/] (level 4)
00:00:00.335535 Driver <string> = "Block" (cb=6)
00:00:00.335536
00:00:00.335536 [/Devices/ahci/0/LUN#1/Config/] (level 5)
00:00:00.335537 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.335537 Type <string> = "DVD" (cb=4)
00:00:00.335538
00:00:00.335538 [/Devices/ahci/0/LUN#999/] (level 4)
00:00:00.335539 Driver <string> = "MainStatus" (cb=11)
00:00:00.335540
00:00:00.335540 [/Devices/ahci/0/LUN#999/Config/] (level 5)
00:00:00.335541 DeviceInstance <string> = "ahci/0" (cb=7)
00:00:00.335542 First <integer> = 0x0000000000000000 (0)
00:00:00.335542 Last <integer> = 0x0000000000000001 (1)
00:00:00.335543 pConsole <integer> = 0x00007fcc24003270 (140 514 754 048 624)
00:00:00.335544 papLeds <integer> = 0x00007fcc24003590 (140 514 754 049 424)
00:00:00.335546 pmapMediumAttachments <integer> = 0x00007fcc24003878 (140 514 754 050 168)
00:00:00.335547
00:00:00.335547 [/Devices/apic/] (level 2)
00:00:00.335548
00:00:00.335548 [/Devices/apic/0/] (level 3)
00:00:00.335549 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335550
00:00:00.335550 [/Devices/apic/0/Config/] (level 4)
00:00:00.335551 IOAPIC <integer> = 0x0000000000000001 (1)
00:00:00.335551 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.335552
00:00:00.335553 [/Devices/e1000/] (level 2)
00:00:00.335553
00:00:00.335554 [/Devices/e1000/0/] (level 3)
00:00:00.335555 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.335555 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:00.335556 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.335556 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335557
00:00:00.335557 [/Devices/e1000/0/Config/] (level 4)
00:00:00.335558 AdapterType <integer> = 0x0000000000000000 (0)
00:00:00.335559 CableConnected <integer> = 0x0000000000000001 (1)
00:00:00.335560 LineSpeed <integer> = 0x0000000000000000 (0)
00:00:00.335560 MAC <bytes> = "08 00 27 fa b3 29" (cb=6)
00:00:00.335562
00:00:00.335562 [/Devices/e1000/0/LUN#0/] (level 4)
00:00:00.335563 Driver <string> = "NAT" (cb=4)
00:00:00.335563
00:00:00.335564 [/Devices/e1000/0/LUN#0/Config/] (level 5)
00:00:00.335565 AliasMode <integer> = 0x0000000000000000 (0)
00:00:00.335565 BootFile <string> = "Windows.pxe" (cb=12)
00:00:00.335566 DNSProxy <integer> = 0x0000000000000000 (0)
00:00:00.335567 Network <string> = "10.0.2.0/24" (cb=12)
00:00:00.335567 PassDomain <integer> = 0x0000000000000001 (1)
00:00:00.335568 TFTPPrefix <string> = "/home/mons/.config/VirtualBox/TFTP" (cb=35)
00:00:00.335569 UseHostResolver <integer> = 0x0000000000000000 (0)
00:00:00.335569
00:00:00.335569 [/Devices/e1000/0/LUN#999/] (level 4)
00:00:00.335570 Driver <string> = "MainStatus" (cb=11)
00:00:00.335571
00:00:00.335571 [/Devices/e1000/0/LUN#999/Config/] (level 5)
00:00:00.335572 First <integer> = 0x0000000000000000 (0)
00:00:00.335573 Last <integer> = 0x0000000000000000 (0)
00:00:00.335573 papLeds <integer> = 0x00007fcc24003740 (140 514 754 049 856)
00:00:00.335574
00:00:00.335575 [/Devices/hda/] (level 2)
00:00:00.335576
00:00:00.335576 [/Devices/hda/0/] (level 3)
00:00:00.335577 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.335577 PCIDeviceNo <integer> = 0x0000000000000005 (5)
00:00:00.335578 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.335579 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335579
00:00:00.335580 [/Devices/hda/0/Config/] (level 4)
00:00:00.335580
00:00:00.335581 [/Devices/hda/0/LUN#0/] (level 4)
00:00:00.335582 Driver <string> = "AUDIO" (cb=6)
00:00:00.335582
00:00:00.335582 [/Devices/hda/0/LUN#0/Config/] (level 5)
00:00:00.335584 AudioDriver <string> = "pulse" (cb=6)
00:00:00.335584 StreamName <string> = "Windows" (cb=8)
00:00:00.335585
00:00:00.335585 [/Devices/i8254/] (level 2)
00:00:00.335586
00:00:00.335586 [/Devices/i8254/0/] (level 3)
00:00:00.335587
00:00:00.335587 [/Devices/i8254/0/Config/] (level 4)
00:00:00.335588
00:00:00.335588 [/Devices/i8259/] (level 2)
00:00:00.335589
00:00:00.335589 [/Devices/i8259/0/] (level 3)
00:00:00.335590 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335591
00:00:00.335591 [/Devices/i8259/0/Config/] (level 4)
00:00:00.335592
00:00:00.335592 [/Devices/ioapic/] (level 2)
00:00:00.335593
00:00:00.335593 [/Devices/ioapic/0/] (level 3)
00:00:00.335594 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335595
00:00:00.335595 [/Devices/ioapic/0/Config/] (level 4)
00:00:00.335596 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.335596
00:00:00.335597 [/Devices/mc146818/] (level 2)
00:00:00.335597
00:00:00.335598 [/Devices/mc146818/0/] (level 3)
00:00:00.335599
00:00:00.335599 [/Devices/mc146818/0/Config/] (level 4)
00:00:00.335600 UseUTC <integer> = 0x0000000000000000 (0)
00:00:00.335600
00:00:00.335601 [/Devices/parallel/] (level 2)
00:00:00.335601
00:00:00.335602 [/Devices/pcarch/] (level 2)
00:00:00.335603
00:00:00.335603 [/Devices/pcarch/0/] (level 3)
00:00:00.335604 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335604
00:00:00.335605 [/Devices/pcarch/0/Config/] (level 4)
00:00:00.335605
00:00:00.335606 [/Devices/pcbios/] (level 2)
00:00:00.335607
00:00:00.335607 [/Devices/pcbios/0/] (level 3)
00:00:00.335608 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335608
00:00:00.335609 [/Devices/pcbios/0/Config/] (level 4)
00:00:00.335610 BootDevice0 <string> = "DVD" (cb=4)
00:00:00.335611 BootDevice1 <string> = "IDE" (cb=4)
00:00:00.335611 BootDevice2 <string> = "NONE" (cb=5)
00:00:00.335612 BootDevice3 <string> = "NONE" (cb=5)
00:00:00.335612 FloppyDevice <string> = "i82078" (cb=7)
00:00:00.335613 HardDiskDevice <string> = "piix3ide" (cb=9)
00:00:00.335614 IOAPIC <integer> = 0x0000000000000001 (1)
00:00:00.335614 LanBootRom <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/PXE-Intel.rom" (cb=85)
00:00:00.335615 McfgBase <integer> = 0x0000000000000000 (0)
00:00:00.335616 McfgLength <integer> = 0x0000000000000000 (0)
00:00:00.335617 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.335617 PXEDebug <integer> = 0x0000000000000000 (0)
00:00:00.335618 RamHoleSize <integer> = 0x0000000020000000 (536 870 912, 512 MB)
00:00:00.335619 RamSize <integer> = 0x0000000100000000 (4 294 967 296, 4 GB)
00:00:00.335620 SataHardDiskDevice <string> = "ahci" (cb=5)
00:00:00.335621 SataLUN1 <integer> = 0x0000000000000000 (0)
00:00:00.335621 UUID <bytes> = "5e c4 73 0a 75 73 23 41 a7 c0 84 f4 80 95 6b 24" (cb=16)
00:00:00.335623
00:00:00.335624 [/Devices/pcbios/0/Config/NetBoot/] (level 5)
00:00:00.335625
00:00:00.335625 [/Devices/pcbios/0/Config/NetBoot/0/] (level 6)
00:00:00.335626 NIC <integer> = 0x0000000000000000 (0)
00:00:00.335627 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.335627 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:00.335628 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.335629
00:00:00.335629 [/Devices/pci/] (level 2)
00:00:00.335630
00:00:00.335630 [/Devices/pci/0/] (level 3)
00:00:00.335631 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335632
00:00:00.335632 [/Devices/pci/0/Config/] (level 4)
00:00:00.335633 IOAPIC <integer> = 0x0000000000000001 (1)
00:00:00.335633
00:00:00.335634 [/Devices/pckbd/] (level 2)
00:00:00.335634
00:00:00.335635 [/Devices/pckbd/0/] (level 3)
00:00:00.335636 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335636
00:00:00.335636 [/Devices/pckbd/0/Config/] (level 4)
00:00:00.335637
00:00:00.335638 [/Devices/pckbd/0/LUN#0/] (level 4)
00:00:00.335639 Driver <string> = "KeyboardQueue" (cb=14)
00:00:00.335639
00:00:00.335639 [/Devices/pckbd/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.335640 Driver <string> = "MainKeyboard" (cb=13)
00:00:00.335641
00:00:00.335641 [/Devices/pckbd/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.335642 Object <integer> = 0x00007fcc2400f390 (140 514 754 098 064)
00:00:00.335643
00:00:00.335644 [/Devices/pckbd/0/LUN#0/Config/] (level 5)
00:00:00.335645 QueueSize <integer> = 0x0000000000000040 (64)
00:00:00.335645
00:00:00.335646 [/Devices/pckbd/0/LUN#1/] (level 4)
00:00:00.335647 Driver <string> = "MouseQueue" (cb=11)
00:00:00.335647
00:00:00.335647 [/Devices/pckbd/0/LUN#1/AttachedDriver/] (level 5)
00:00:00.335648 Driver <string> = "MainMouse" (cb=10)
00:00:00.335649
00:00:00.335649 [/Devices/pckbd/0/LUN#1/AttachedDriver/Config/] (level 6)
00:00:00.335650 Object <integer> = 0x00007fcc2400fa60 (140 514 754 099 808)
00:00:00.335651
00:00:00.335652 [/Devices/pckbd/0/LUN#1/Config/] (level 5)
00:00:00.335652 QueueSize <integer> = 0x0000000000000080 (128)
00:00:00.335653
00:00:00.335653 [/Devices/pcnet/] (level 2)
00:00:00.335654
00:00:00.335655 [/Devices/serial/] (level 2)
00:00:00.335655
00:00:00.335656 [/Devices/usb-ehci/] (level 2)
00:00:00.335656
00:00:00.335657 [/Devices/usb-ehci/0/] (level 3)
00:00:00.335658 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.335658 PCIDeviceNo <integer> = 0x000000000000000b (11)
00:00:00.335659 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.335659 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335660
00:00:00.335660 [/Devices/usb-ehci/0/Config/] (level 4)
00:00:00.335661
00:00:00.335662 [/Devices/usb-ehci/0/LUN#0/] (level 4)
00:00:00.335662 Driver <string> = "VUSBRootHub" (cb=12)
00:00:00.335663
00:00:00.335663 [/Devices/usb-ehci/0/LUN#0/Config/] (level 5)
00:00:00.335664
00:00:00.335665 [/Devices/usb-ehci/0/LUN#999/] (level 4)
00:00:00.335665 Driver <string> = "MainStatus" (cb=11)
00:00:00.335666
00:00:00.335666 [/Devices/usb-ehci/0/LUN#999/Config/] (level 5)
00:00:00.335667 First <integer> = 0x0000000000000000 (0)
00:00:00.335668 Last <integer> = 0x0000000000000000 (0)
00:00:00.335668 papLeds <integer> = 0x00007fcc24003870 (140 514 754 050 160)
00:00:00.335669
00:00:00.335670 [/Devices/usb-ohci/] (level 2)
00:00:00.335671
00:00:00.335671 [/Devices/usb-ohci/0/] (level 3)
00:00:00.335672 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.335672 PCIDeviceNo <integer> = 0x0000000000000006 (6)
00:00:00.335673 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.335673 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335674
00:00:00.335674 [/Devices/usb-ohci/0/Config/] (level 4)
00:00:00.335675
00:00:00.335676 [/Devices/usb-ohci/0/LUN#0/] (level 4)
00:00:00.335677 Driver <string> = "VUSBRootHub" (cb=12)
00:00:00.335677
00:00:00.335677 [/Devices/usb-ohci/0/LUN#0/Config/] (level 5)
00:00:00.335678
00:00:00.335679 [/Devices/usb-ohci/0/LUN#999/] (level 4)
00:00:00.335679 Driver <string> = "MainStatus" (cb=11)
00:00:00.335680
00:00:00.335680 [/Devices/usb-ohci/0/LUN#999/Config/] (level 5)
00:00:00.335681 First <integer> = 0x0000000000000000 (0)
00:00:00.335682 Last <integer> = 0x0000000000000000 (0)
00:00:00.335682 papLeds <integer> = 0x00007fcc24003868 (140 514 754 050 152)
00:00:00.335683
00:00:00.335684 [/Devices/vga/] (level 2)
00:00:00.335685
00:00:00.335685 [/Devices/vga/0/] (level 3)
00:00:00.335686 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.335686 PCIDeviceNo <integer> = 0x0000000000000002 (2)
00:00:00.335687 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.335688 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.335688
00:00:00.335688 [/Devices/vga/0/Config/] (level 4)
00:00:00.335690 CustomVideoModes <integer> = 0x0000000000000000 (0)
00:00:00.335690 FadeIn <integer> = 0x0000000000000001 (1)
00:00:00.335691 FadeOut <integer> = 0x0000000000000001 (1)
00:00:00.335692 HeightReduction <integer> = 0x0000000000000000 (0)
00:00:00.335692 LogoFile <string> = "" (cb=1)
00:00:00.335693 LogoTime <integer> = 0x0000000000000000 (0)
00:00:00.335694 MonitorCount <integer> = 0x0000000000000001 (1)
00:00:00.335694 ShowBootMenu <integer> = 0x0000000000000002 (2)
00:00:00.335695 VRamSize <integer> = 0x0000000008000000 (134 217 728, 128 MB)
00:00:00.335696
00:00:00.335696 [/Devices/vga/0/LUN#0/] (level 4)
00:00:00.335697 Driver <string> = "MainDisplay" (cb=12)
00:00:00.335698
00:00:00.335698 [/Devices/vga/0/LUN#0/Config/] (level 5)
00:00:00.335699 Object <integer> = 0x00007fcc24003c50 (140 514 754 051 152)
00:00:00.335700
00:00:00.335700 [/Devices/virtio-net/] (level 2)
00:00:00.335701
00:00:00.335701 [/EM/] (level 1)
00:00:00.335702 TripleFaultReset <integer> = 0x0000000000000000 (0)
00:00:00.335703
00:00:00.335703 [/HM/] (level 1)
00:00:00.335704 64bitEnabled <integer> = 0x0000000000000001 (1)
00:00:00.335704 EnableLargePages <integer> = 0x0000000000000000 (0)
00:00:00.335705 EnableNestedPaging <integer> = 0x0000000000000001 (1)
00:00:00.335706 EnableUX <integer> = 0x0000000000000001 (1)
00:00:00.335706 EnableVPID <integer> = 0x0000000000000001 (1)
00:00:00.335707 Exclusive <integer> = 0x0000000000000001 (1)
00:00:00.335708 HMForced <integer> = 0x0000000000000001 (1)
00:00:00.335708
00:00:00.335709 [/MM/] (level 1)
00:00:00.335709 CanUseLargerHeap <integer> = 0x0000000000000000 (0)
00:00:00.335710
00:00:00.335710 [/PDM/] (level 1)
00:00:00.335711
00:00:00.335711 [/PDM/AsyncCompletion/] (level 2)
00:00:00.335712
00:00:00.335712 [/PDM/AsyncCompletion/File/] (level 3)
00:00:00.335713
00:00:00.335713 [/PDM/AsyncCompletion/File/BwGroups/] (level 4)
00:00:00.335714
00:00:00.335714 [/PDM/BlkCache/] (level 2)
00:00:00.335715 CacheSize <integer> = 0x0000000000500000 (5 242 880, 5 MB)
00:00:00.335716
00:00:00.335717 [/PDM/Devices/] (level 2)
00:00:00.335717
00:00:00.335718 [/PDM/Devices/VBoxEhci/] (level 3)
00:00:00.335718 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxEhciR3.so" (cb=97)
00:00:00.335719 R0SearchPath <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64" (cb=83)
00:00:00.335720 RCSearchPath <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64" (cb=83)
00:00:00.335720
00:00:00.335721 [/PDM/Devices/VBoxPciRaw/] (level 3)
00:00:00.335722 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxPciRawR3.so" (cb=99)
00:00:00.335722 R0SearchPath <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64" (cb=83)
00:00:00.335723
00:00:00.335723 [/PDM/Drivers/] (level 2)
00:00:00.335724
00:00:00.335724 [/PDM/Drivers/DrvHostWebcam/] (level 3)
00:00:00.335725 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxHostWebcam.so" (cb=101)
00:00:00.335726
00:00:00.335726 [/PDM/Drivers/VBoxC/] (level 3)
00:00:00.335727 Path <string> = "/usr/lib/virtualbox/components/VBoxC" (cb=37)
00:00:00.335727
00:00:00.335728 [/PDM/Drivers/VBoxPciRawDrv/] (level 3)
00:00:00.335728 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxPciRawDrv.so" (cb=100)
00:00:00.335729
00:00:00.335729 [/PDM/NetworkShaper/] (level 2)
00:00:00.335730
00:00:00.335730 [/PDM/NetworkShaper/BwGroups/] (level 3)
00:00:00.335731
00:00:00.335732 [/PDM/USB/] (level 2)
00:00:00.335732
00:00:00.335733 [/PDM/USB/VBoxUsbCardReader/] (level 3)
00:00:00.335733 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxUsbCardReaderR3.so" (cb=106)
00:00:00.335734
00:00:00.335734 [/PDM/USB/VBoxUsbWebcam/] (level 3)
00:00:00.335735 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxUsbWebcamR3.so" (cb=102)
00:00:00.335736
00:00:00.335736 [/TM/] (level 1)
00:00:00.335737 UTCOffset <integer> = 0x0000000000000000 (0)
00:00:00.335737
00:00:00.335738 [/USB/] (level 1)
00:00:00.335738
00:00:00.335738 [/USB/USBProxy/] (level 2)
00:00:00.335739
00:00:00.335740 [/USB/USBProxy/GlobalConfig/] (level 3)
00:00:00.335740
00:00:00.335741 ********************* End of CFGM dump **********************
00:00:00.335744 VM: fHMEnabled=true (configured) fRecompileUser=false fRecompileSupervisor=false
00:00:00.335746 VM: fRawRing1Enabled=false CSAM=true PATM=true
00:00:00.335851 HMR3Init: VT-x w/ nested paging
00:00:00.335869 MM: cbHyperHeap=0x140000 (1310720)
00:00:00.338521 CPUM: Matched host CPU INTEL 0x6/0x3a/0x9 Intel_Core7_IvyBridge with CPU DB entry 'Intel Core i5-3570' (INTEL 0x6/0x3a/0x9 Intel_Core7_IvyBridge).
00:00:00.338657 Debug: HCPhysInterPD=00000000ba561000 HCPhysInterPaePDPT=00000000b36f1000 HCPhysInterPaePML4=00000000b3115000
00:00:00.338663 Debug: apInterPTs={00000000b36f7000,00000000c2da4000} apInterPaePTs={00000000c2c9b000,00000000c2cf4000} apInterPaePDs={00000000c2cf5000,00000000c2cf6000,00000000c2cf7000,00000000b7b7c000} pInterPaePDPT64=00000000b3151000
00:00:00.338669 Host paging mode: AMD64+PGE+NX
00:00:00.338672 PGMPool: cMaxPages=2096 (u64MaxPages=2084)
00:00:00.338674 pgmR3PoolInit: cMaxPages=0x830 cMaxUsers=0x1060 cMaxPhysExts=0x1060 fCacheEnable=true
00:00:00.359270 TM: GIP - u32Mode=1 (SyncTSC) u32UpdateHz=75
00:00:00.391293 TM: cTSCTicksPerSecond=0xca49afa5 (3 393 826 725) fTSCVirtualized=true fTSCUseRealTSC=false
00:00:00.391298 TM: fMaybeUseOffsettedHostTSC=false TSCTiedToExecution=false TSCNotTiedToHalt=false
00:00:00.392079 CoreCode: R3=00007fcc40f0d000 R0=ffffc90004e8c000 RC=a0fe8000 Phys=00000000b313f000 cb=0x1000
00:00:00.431663 AIOMgr: Default manager type is "Async"
00:00:00.431677 AIOMgr: Default file backend is "NonBuffered"
00:00:00.431814 BlkCache: Cache successfully initialised. Cache size is 5242880 bytes
00:00:00.431822 BlkCache: Cache commit interval is 10000 ms
00:00:00.431826 BlkCache: Cache commit threshold is 2621440 bytes
00:00:00.433686 [SMP] BIOS with 4 CPUs
00:00:00.434150 DevPcBios: Using LAN ROM '/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/PXE-Intel.rom' with a size of 0xc000 bytes
00:00:00.442118 SUP: Loaded VBoxDDR0.r0 (/usr/lib/virtualbox/VBoxDDR0.r0) at 0xffffffffa0693020 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.443711 SUP: Loaded VBoxDD2R0.r0 (/usr/lib/virtualbox/VBoxDD2R0.r0) at 0xffffffffa0006020 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.443743 Activating Local APIC
00:00:00.443748 CPUM: SetGuestCpuIdFeature: Enabled APIC
00:00:00.444142 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:00.446611 Shared Folders service loaded.
00:00:00.482262 DrvBlock: Flushes will be ignored
00:00:00.482284 DrvBlock: Async flushes will be passed to the disk
00:00:00.482411 VDInit finished
00:00:00.482576 AIOMgr: Endpoint for file '/mnt/virtualbox/Windows/Windows.vdi' (flags 000c0723) created successfully
00:00:00.485091 VD: Opening the disk took 2779925 ns
00:00:00.485128 AHCI: LUN#0: disk, PCHS=16383/16/63, total number of sectors 67108864
00:00:00.485137 AHCI: LUN#0: using async I/O
00:00:00.485242 DrvBlock: Flushes will be ignored
00:00:00.485254 DrvBlock: Async flushes will be passed to the disk
00:00:00.485262 AHCI LUN#1: CD/DVD, total number of sectors 0, passthrough disabled
00:00:00.485271 AHCI: LUN#1: using normal I/O
00:00:00.485397 AHCI#0: Reset the HBA
00:00:00.488970 NAT: DNS#0: 192.168.1.1
00:00:00.488992 NAT: DNS#1: 8.8.8.8
00:00:00.488996 NAT: DNS#2: 8.8.4.4
00:00:00.489503 Audio: Trying driver 'pulse'.
00:00:00.493558 Pulse: open PCM_IN rate=44100Hz channels=2 format=s16le
00:00:00.493575 Pulse: Requested record buffer attributes: maxlength=26460 fragsize=17640
00:00:00.494814 Pulse: Obtained record buffer attributes: maxlength=26460 fragsize=8820
00:00:00.494849 HdaCodec: can't open in fmt(freq: 44100)
00:00:00.494859 Pulse: open PCM_OUT rate=44100Hz channels=2 format=s16le
00:00:00.494870 Pulse: Requested playback buffer attributes: maxlength=26460 tlength=17640 prebuf=-1 minreq=-1
00:00:00.497428 Pulse: Obtained playback buffer attributes: maxlength=26460 tlength=12348 prebuf=8824 minreq=3528
00:00:00.497459 HdaCodec: can't open out fmt(freq: 44100)
00:00:00.501613 SUP: Loaded VBoxEhciR0.r0 (/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxEhciR0.r0) at 0xffffffffa0031020 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.502042 DevPcBios: SATA LUN#0 LCHS=1024/255/63
00:00:00.502180 PGM: The CPU physical address width is 36 bits
00:00:00.502187 PGMR3InitFinalize: 4 MB PSE mask 0000000fffffffff
00:00:00.505772 VMM: Thread-context hooks enabled!
00:00:00.505811 HM: Using VT-x implementation 2.0!
00:00:00.505812 HM: Host CR4 = 0x1407f0
00:00:00.505814 HM: Host EFER = 0xd01
00:00:00.505814 HM: MSR_IA32_FEATURE_CONTROL = 0x5
00:00:00.505815 HM: MSR_IA32_VMX_BASIC_INFO = 0xda040000000010
00:00:00.505817 HM: VMCS id = 0x10
00:00:00.505818 HM: VMCS size = 1024 bytes
00:00:00.505819 HM: VMCS physical address limit = None
00:00:00.505819 HM: VMCS memory type = 0x6
00:00:00.505820 HM: Dual-monitor treatment support = true
00:00:00.505821 HM: OUTS & INS instruction-info = true
00:00:00.505822 HM: Max resume loops = 8192
00:00:00.505823 HM: MSR_IA32_VMX_PINBASED_CTLS = 0x7f00000016
00:00:00.505824 HM: VMX_VMCS_CTRL_PIN_EXEC_EXT_INT_EXIT
00:00:00.505825 HM: VMX_VMCS_CTRL_PIN_EXEC_NMI_EXIT
00:00:00.505825 HM: VMX_VMCS_CTRL_PIN_EXEC_VIRTUAL_NMI
00:00:00.505826 HM: VMX_VMCS_CTRL_PIN_EXEC_PREEMPT_TIMER
00:00:00.505826 HM: MSR_IA32_VMX_PROCBASED_CTLS = 0xfff9fffe0401e172
00:00:00.505828 HM: VMX_VMCS_CTRL_PROC_EXEC_INT_WINDOW_EXIT
00:00:00.505828 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_TSC_OFFSETTING
00:00:00.505829 HM: VMX_VMCS_CTRL_PROC_EXEC_HLT_EXIT
00:00:00.505829 HM: VMX_VMCS_CTRL_PROC_EXEC_INVLPG_EXIT
00:00:00.505830 HM: VMX_VMCS_CTRL_PROC_EXEC_MWAIT_EXIT
00:00:00.505830 HM: VMX_VMCS_CTRL_PROC_EXEC_RDPMC_EXIT
00:00:00.505831 HM: VMX_VMCS_CTRL_PROC_EXEC_RDTSC_EXIT
00:00:00.505831 HM: VMX_VMCS_CTRL_PROC_EXEC_CR3_LOAD_EXIT
00:00:00.505832 HM: VMX_VMCS_CTRL_PROC_EXEC_CR3_LOAD_EXIT (must be set)
00:00:00.505833 HM: VMX_VMCS_CTRL_PROC_EXEC_CR3_STORE_EXIT
00:00:00.505833 HM: VMX_VMCS_CTRL_PROC_EXEC_CR3_STORE_EXIT (must be set)
00:00:00.505834 HM: VMX_VMCS_CTRL_PROC_EXEC_CR8_LOAD_EXIT
00:00:00.505834 HM: VMX_VMCS_CTRL_PROC_EXEC_CR8_STORE_EXIT
00:00:00.505835 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_TPR_SHADOW
00:00:00.505835 HM: VMX_VMCS_CTRL_PROC_EXEC_NMI_WINDOW_EXIT
00:00:00.505836 HM: VMX_VMCS_CTRL_PROC_EXEC_MOV_DR_EXIT
00:00:00.505836 HM: VMX_VMCS_CTRL_PROC_EXEC_UNCOND_IO_EXIT
00:00:00.505837 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_IO_BITMAPS
00:00:00.505837 HM: VMX_VMCS_CTRL_PROC_EXEC_MONITOR_TRAP_FLAG
00:00:00.505838 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_MSR_BITMAPS
00:00:00.505838 HM: VMX_VMCS_CTRL_PROC_EXEC_MONITOR_EXIT
00:00:00.505839 HM: VMX_VMCS_CTRL_PROC_EXEC_PAUSE_EXIT
00:00:00.505840 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_SECONDARY_EXEC_CTRL
00:00:00.505840 HM: MSR_IA32_VMX_PROCBASED_CTLS2 = 0x8ff00000000
00:00:00.505841 HM: VMX_VMCS_CTRL_PROC_EXEC2_VIRT_APIC
00:00:00.505842 HM: VMX_VMCS_CTRL_PROC_EXEC2_EPT
00:00:00.505843 HM: VMX_VMCS_CTRL_PROC_EXEC2_DESCRIPTOR_TABLE_EXIT
00:00:00.505843 HM: VMX_VMCS_CTRL_PROC_EXEC2_RDTSCP
00:00:00.505844 HM: VMX_VMCS_CTRL_PROC_EXEC2_VIRT_X2APIC
00:00:00.505844 HM: VMX_VMCS_CTRL_PROC_EXEC2_VPID
00:00:00.505845 HM: VMX_VMCS_CTRL_PROC_EXEC2_WBINVD_EXIT
00:00:00.505846 HM: VMX_VMCS_CTRL_PROC_EXEC2_UNRESTRICTED_GUEST
00:00:00.505846 HM: VMX_VMCS_CTRL_PROC_EXEC2_PAUSE_LOOP_EXIT (must be cleared)
00:00:00.505847 HM: VMX_VMCS_CTRL_PROC_EXEC2_RDRAND_EXIT
00:00:00.505847 HM: VMX_VMCS_CTRL_PROC_EXEC2_INVPCID (must be cleared)
00:00:00.505848 HM: VMX_VMCS_CTRL_PROC_EXEC2_VMFUNC (must be cleared)
00:00:00.505848 HM: MSR_IA32_VMX_ENTRY_CTLS = 0xffff000011ff
00:00:00.505849 HM: VMX_VMCS_CTRL_ENTRY_LOAD_DEBUG
00:00:00.505850 HM: VMX_VMCS_CTRL_ENTRY_LOAD_DEBUG (must be set)
00:00:00.505850 HM: VMX_VMCS_CTRL_ENTRY_IA32E_MODE_GUEST
00:00:00.505851 HM: VMX_VMCS_CTRL_ENTRY_ENTRY_SMM
00:00:00.505851 HM: VMX_VMCS_CTRL_ENTRY_DEACTIVATE_DUALMON
00:00:00.505852 HM: VMX_VMCS_CTRL_ENTRY_LOAD_GUEST_PERF_MSR
00:00:00.505852 HM: VMX_VMCS_CTRL_ENTRY_LOAD_GUEST_PAT_MSR
00:00:00.505853 HM: VMX_VMCS_CTRL_ENTRY_LOAD_GUEST_EFER_MSR
00:00:00.505853 HM: MSR_IA32_VMX_EXIT_CTLS = 0x7fffff00036dff
00:00:00.505855 HM: VMX_VMCS_CTRL_EXIT_SAVE_DEBUG
00:00:00.505855 HM: VMX_VMCS_CTRL_EXIT_SAVE_DEBUG (must be set)
00:00:00.505856 HM: VMX_VMCS_CTRL_EXIT_HOST_ADDR_SPACE_SIZE
00:00:00.505856 HM: VMX_VMCS_CTRL_EXIT_LOAD_PERF_MSR
00:00:00.505857 HM: VMX_VMCS_CTRL_EXIT_ACK_EXT_INT
00:00:00.505857 HM: VMX_VMCS_CTRL_EXIT_SAVE_GUEST_PAT_MSR
00:00:00.505858 HM: VMX_VMCS_CTRL_EXIT_LOAD_HOST_PAT_MSR
00:00:00.505858 HM: VMX_VMCS_CTRL_EXIT_SAVE_GUEST_EFER_MSR
00:00:00.505859 HM: VMX_VMCS_CTRL_EXIT_LOAD_HOST_EFER_MSR
00:00:00.505860 HM: VMX_VMCS_CTRL_EXIT_SAVE_VMX_PREEMPT_TIMER
00:00:00.505860 HM: MSR_IA32_VMX_EPT_VPID_CAP = 0xf0106114141
00:00:00.505861 HM: MSR_IA32_VMX_EPT_VPID_CAP_RWX_X_ONLY
00:00:00.505862 HM: MSR_IA32_VMX_EPT_VPID_CAP_GAW_48_BITS
00:00:00.505863 HM: MSR_IA32_VMX_EPT_VPID_CAP_EMT_UC
00:00:00.505863 HM: MSR_IA32_VMX_EPT_VPID_CAP_EMT_WB
00:00:00.505864 HM: MSR_IA32_VMX_EPT_VPID_CAP_SP_21_BITS
00:00:00.505864 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVEPT
00:00:00.505865 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVEPT_SINGLE_CONTEXT
00:00:00.505865 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVEPT_ALL_CONTEXTS
00:00:00.505866 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID
00:00:00.505866 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID_INDIV_ADDR
00:00:00.505867 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID_SINGLE_CONTEXT
00:00:00.505868 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID_ALL_CONTEXTS
00:00:00.505868 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID_SINGLE_CONTEXT_RETAIN_GLOBALS
00:00:00.505869 HM: MSR_IA32_VMX_MISC = 0x100401e5
00:00:00.505870 HM: MSR_IA32_VMX_MISC_PREEMPT_TSC_BIT = 0x5
00:00:00.505870 HM: MSR_IA32_VMX_MISC_STORE_EFERLMA_VMEXIT = true
00:00:00.505871 HM: MSR_IA32_VMX_MISC_ACTIVITY_STATES = 0x7
00:00:00.505872 HM: MSR_IA32_VMX_MISC_CR3_TARGET = 0x4
00:00:00.505872 HM: MSR_IA32_VMX_MISC_MAX_MSR = 512
00:00:00.505873 HM: MSR_IA32_VMX_MISC_RDMSR_SMBASE_MSR_SMM = false
00:00:00.505874 HM: MSR_IA32_VMX_MISC_SMM_MONITOR_CTL_B2 = true
00:00:00.505875 HM: MSR_IA32_VMX_MISC_VMWRITE_VMEXIT_INFO = false
00:00:00.505875 HM: MSR_IA32_VMX_MISC_MSEG_ID = 0x0
00:00:00.505876 HM: MSR_IA32_VMX_CR0_FIXED0 = 0x80000021
00:00:00.505877 HM: MSR_IA32_VMX_CR0_FIXED1 = 0xffffffff
00:00:00.505878 HM: MSR_IA32_VMX_CR4_FIXED0 = 0x2000
00:00:00.505879 HM: MSR_IA32_VMX_CR4_FIXED1 = 0x1767ff
00:00:00.505880 HM: MSR_IA32_VMX_VMCS_ENUM = 0x2a
00:00:00.505880 HM: MSR_IA32_VMX_VMCS_ENUM_HIGHEST_INDEX = 0x15
00:00:00.505881 HM: APIC-access page physaddr = 0x00000000ba5f0000
00:00:00.505882 HM: VCPU 0: MSR bitmap physaddr = 0x00000000ba5ed000
00:00:00.505884 HM: VCPU 0: VMCS physaddr = 0x00000000ba5ef000
00:00:00.505885 HM: VCPU 1: MSR bitmap physaddr = 0x00000000ba5e8000
00:00:00.505886 HM: VCPU 1: VMCS physaddr = 0x00000000ba5ea000
00:00:00.505887 HM: VCPU 2: MSR bitmap physaddr = 0x00000000ba5e3000
00:00:00.505888 HM: VCPU 2: VMCS physaddr = 0x00000000ba5e5000
00:00:00.505889 HM: VCPU 3: MSR bitmap physaddr = 0x00000000ba5de000
00:00:00.505890 HM: VCPU 3: VMCS physaddr = 0x00000000ba5e0000
00:00:00.505891 HM: Guest support: 32-bit and 64-bit.
00:00:00.505894 HM: Supports VMCS EFER fields = true
00:00:00.505895 HM: VMX enabled!
00:00:00.505902 CPUM: SetGuestCpuIdFeature: Enabled SYSENTER/EXIT
00:00:00.505903 CPUM: SetGuestCpuIdFeature: Enabled PAE
00:00:00.505904 CPUM: SetGuestCpuIdFeature: Enabled LONG MODE
00:00:00.505905 CPUM: SetGuestCpuIdFeature: Enabled SYSCALL/RET
00:00:00.505905 CPUM: SetGuestCpuIdFeature: Enabled LAHF/SAHF
00:00:00.505906 CPUM: SetGuestCpuIdFeature: Enabled NX
00:00:00.505906 HM: Nested paging enabled!
00:00:00.505907 HM: EPT flush type = VMX_FLUSH_EPT_SINGLE_CONTEXT
00:00:00.505907 HM: Unrestricted guest execution enabled!
00:00:00.505908 HM: VPID enabled!
00:00:00.505909 HM: VPID flush type = VMX_FLUSH_VPID_SINGLE_CONTEXT
00:00:00.505911 HM: VMX-preemption timer enabled (cPreemptTimerShift=5).
00:00:00.505911 HM: VT-x/AMD-V init method: GLOBAL
00:00:00.505913 VMM: fUsePeriodicPreemptionTimers=false
00:00:00.506353 Logical host processors: 4 present, 4 max, 4 online, online mask: 000000000000000f
00:00:00.506397 Physical host cores: 4
00:00:00.506398 ************************* CPUID dump ************************
00:00:00.506401 RAW Standard CPUIDs
00:00:00.506401 Function eax ebx ecx edx
00:00:00.506402 Gst: 00000000 00000005 756e6547 6c65746e 49656e69
00:00:00.506404 Hst: 0000000d 756e6547 6c65746e 49656e69
00:00:00.506406 Gst: 00000001 000306a9 00040800 00002201 178bfbff
00:00:00.506408 Hst: 000306a9 02100800 7fbae3ff bfebfbff
00:00:00.506409 Gst: 00000002 76035a01 00f0b0ff 00000000 00ca0000
00:00:00.506411 Hst: 76035a01 00f0b0ff 00000000 00ca0000
00:00:00.506412 Gst: 00000003 00000000 00000000 00000000 00000000
00:00:00.506413 Hst: 00000000 00000000 00000000 00000000
00:00:00.506415 Gst: 00000004 0c000000 00000000 00000000 00000000
00:00:00.506416 Hst: 1c004121 01c0003f 0000003f 00000000
00:00:00.506417 Gst: 00000005 00000000 00000000 00000000 00000000
00:00:00.506418 Hst: 00000040 00000040 00000003 00001120
00:00:00.506419 Hst: 00000006 00000077 00000002 00000009 00000000
00:00:00.506421 Hst: 00000007 00000000 00000281 00000000 00000000
00:00:00.506422 Hst: 00000008 00000000 00000000 00000000 00000000
00:00:00.506423 Hst: 00000009 00000000 00000000 00000000 00000000
00:00:00.506424 Hst: 0000000a 07300803 00000000 00000000 00000603
00:00:00.506425 Hst: 0000000b 00000001 00000001 00000100 00000002
00:00:00.506427 Hst: 0000000c 00000000 00000000 00000000 00000000
00:00:00.506428 Hst: 0000000d 00000007 00000340 00000340 00000000
00:00:00.506429 Name: GenuineIntel
00:00:00.506430 Supports: 0-5
00:00:00.506431 Family: 6 Extended: 0 Effective: 6
00:00:00.506432 Model: 10 Extended: 3 Effective: 58
00:00:00.506433 Stepping: 9
00:00:00.506433 Type: 0 (primary)
00:00:00.506434 APIC ID: 0x00
00:00:00.506435 Logical CPUs: 4
00:00:00.506435 CLFLUSH Size: 8
00:00:00.506436 Brand ID: 0x00
00:00:00.506437 Mnemonic - Description = guest (host)
00:00:00.506437 FPU - x87 FPU on Chip = 1 (1)
00:00:00.506438 VME - Virtual 8086 Mode Enhancements = 1 (1)
00:00:00.506439 DE - Debugging extensions = 1 (1)
00:00:00.506440 PSE - Page Size Extension = 1 (1)
00:00:00.506440 TSC - Time Stamp Counter = 1 (1)
00:00:00.506441 MSR - Model Specific Registers = 1 (1)
00:00:00.506442 PAE - Physical Address Extension = 1 (1)
00:00:00.506443 MCE - Machine Check Exception = 1 (1)
00:00:00.506443 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:00.506444 APIC - APIC On-Chip = 1 (1)
00:00:00.506445 10 - Reserved = 0 (0)
00:00:00.506445 SEP - SYSENTER and SYSEXIT = 1 (1)
00:00:00.506446 MTRR - Memory Type Range Registers = 1 (1)
00:00:00.506447 PGE - PTE Global Bit = 1 (1)
00:00:00.506447 MCA - Machine Check Architecture = 1 (1)
00:00:00.506448 CMOV - Conditional Move Instructions = 1 (1)
00:00:00.506449 PAT - Page Attribute Table = 1 (1)
00:00:00.506449 PSE-36 - 36-bit Page Size Extention = 1 (1)
00:00:00.506450 PSN - Processor Serial Number = 0 (0)
00:00:00.506451 CLFSH - CLFLUSH Instruction. = 1 (1)
00:00:00.506451 20 - Reserved = 0 (0)
00:00:00.506452 DS - Debug Store = 0 (1)
00:00:00.506453 ACPI - Thermal Mon. & Soft. Clock Ctrl.= 0 (1)
00:00:00.506453 MMX - Intel MMX Technology = 1 (1)
00:00:00.506454 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:00.506455 SSE - SSE Support = 1 (1)
00:00:00.506455 SSE2 - SSE2 Support = 1 (1)
00:00:00.506456 SS - Self Snoop = 0 (1)
00:00:00.506457 HTT - Hyper-Threading Technology = 1 (1)
00:00:00.506457 TM - Thermal Monitor = 0 (1)
00:00:00.506458 30 - Reserved = 0 (0)
00:00:00.506459 PBE - Pending Break Enable = 0 (1)
00:00:00.506459 Supports SSE3 = 1 (1)
00:00:00.506460 PCLMULQDQ = 0 (1)
00:00:00.506461 DS Area 64-bit layout = 0 (1)
00:00:00.506461 Supports MONITOR/MWAIT = 0 (1)
00:00:00.506462 CPL-DS - CPL Qualified Debug Store = 0 (1)
00:00:00.506463 VMX - Virtual Machine Technology = 0 (1)
00:00:00.506463 SMX - Safer Mode Extensions = 0 (1)
00:00:00.506464 Enhanced SpeedStep Technology = 0 (1)
00:00:00.506465 Terminal Monitor 2 = 0 (1)
00:00:00.506465 Supplemental SSE3 instructions = 1 (1)
00:00:00.506466 L1 Context ID = 0 (0)
00:00:00.506467 11 - Reserved = 0 (0)
00:00:00.506467 FMA extensions using YMM state = 0 (0)
00:00:00.506468 CMPXCHG16B instruction = 1 (1)
00:00:00.506469 xTPR Update Control = 0 (1)
00:00:00.506469 Perf/Debug Capability MSR = 0 (1)
00:00:00.506470 16 - Reserved = 0 (0)
00:00:00.506471 PCID - Process-context identifiers = 0 (1)
00:00:00.506471 DCA - Direct Cache Access = 0 (0)
00:00:00.506472 SSE4.1 instruction extensions = 0 (1)
00:00:00.506473 SSE4.2 instruction extensions = 0 (1)
00:00:00.506473 Supports the x2APIC extensions = 0 (1)
00:00:00.506474 MOVBE instruction = 0 (0)
00:00:00.506475 POPCNT instruction = 0 (1)
00:00:00.506475 TSC-Deadline LAPIC timer mode = 0 (1)
00:00:00.506476 AESNI instruction extensions = 0 (1)
00:00:00.506477 XSAVE/XRSTOR extended state feature = 0 (1)
00:00:00.506477 Supports OSXSAVE = 0 (1)
00:00:00.506478 AVX instruction extensions = 0 (1)
00:00:00.506479 29/30 - Reserved = 0x0 (0x3)
00:00:00.506480 Hypervisor Present (we're a guest) = 0 (0)
00:00:00.506480
00:00:00.506481 RAW Extended CPUIDs
00:00:00.506481 Function eax ebx ecx edx
00:00:00.506482 Gst: 80000000 80000008 00000000 00000000 00000000
00:00:00.506483 Hst: 80000008 00000000 00000000 00000000
00:00:00.506484 Gst: 80000001 00000000 00000000 00000001 28100800
00:00:00.506486 Hst: 00000000 00000000 00000001 28100800
00:00:00.506487 Gst: 80000002 20202020 20202020 65746e49 2952286c
00:00:00.506489 Hst: 20202020 20202020 65746e49 2952286c
00:00:00.506491 Gst: 80000003 726f4320 4d542865 35692029 3735332d
00:00:00.506493 Hst: 726f4320 4d542865 35692029 3735332d
00:00:00.506495 Gst: 80000004 50432030 20402055 30342e33 007a4847
00:00:00.506496 Hst: 50432030 20402055 30342e33 007a4847
00:00:00.506498 Gst: 80000005 00000000 00000000 00000000 00000000
00:00:00.506499 Hst: 00000000 00000000 00000000 00000000
00:00:00.506500 Gst: 80000006 00000000 00000000 01006040 00000000
00:00:00.506501 Hst: 00000000 00000000 01006040 00000000
00:00:00.506502 Gst: 80000007 00000000 00000000 00000000 00000000
00:00:00.506503 Hst: 00000000 00000000 00000000 00000100
00:00:00.506504 Gst: 80000008 00003024 00000000 00000000 00000000
00:00:00.506506 Hst: 00003024 00000000 00000000 00000000
00:00:00.506507 Gst: 80000009 00000007 00000340 00000340 00000000*
00:00:00.506508 Hst: 00000007 00000340 00000340 00000000
00:00:00.506509 Ext Name:
00:00:00.506510 Ext Supports: 0x80000000-0x80000008
00:00:00.506511 Family: 0 Extended: 0 Effective: 0
00:00:00.506512 Model: 0 Extended: 0 Effective: 0
00:00:00.506512 Stepping: 0
00:00:00.506513 Brand ID: 0x000
00:00:00.506514 Mnemonic - Description = guest (host)
00:00:00.506514 FPU - x87 FPU on Chip = 0 (0)
00:00:00.506515 VME - Virtual 8086 Mode Enhancements = 0 (0)
00:00:00.506516 DE - Debugging extensions = 0 (0)
00:00:00.506516 PSE - Page Size Extension = 0 (0)
00:00:00.506517 TSC - Time Stamp Counter = 0 (0)
00:00:00.506518 MSR - K86 Model Specific Registers = 0 (0)
00:00:00.506518 PAE - Physical Address Extension = 0 (0)
00:00:00.506519 MCE - Machine Check Exception = 0 (0)
00:00:00.506520 CX8 - CMPXCHG8B instruction = 0 (0)
00:00:00.506520 APIC - APIC On-Chip = 0 (0)
00:00:00.506521 10 - Reserved = 0 (0)
00:00:00.506522 SEP - SYSCALL and SYSRET = 1 (1)
00:00:00.506522 MTRR - Memory Type Range Registers = 0 (0)
00:00:00.506523 PGE - PTE Global Bit = 0 (0)
00:00:00.506524 MCA - Machine Check Architecture = 0 (0)
00:00:00.506524 CMOV - Conditional Move Instructions = 0 (0)
00:00:00.506525 PAT - Page Attribute Table = 0 (0)
00:00:00.506526 PSE-36 - 36-bit Page Size Extention = 0 (0)
00:00:00.506526 18 - Reserved = 0 (0)
00:00:00.506527 19 - Reserved = 0 (0)
00:00:00.506528 NX - No-Execute Page Protection = 1 (1)
00:00:00.506528 DS - Debug Store = 0 (0)
00:00:00.506529 AXMMX - AMD Extensions to MMX Instr. = 0 (0)
00:00:00.506530 MMX - Intel MMX Technology = 0 (0)
00:00:00.506530 FXSR - FXSAVE and FXRSTOR Instructions = 0 (0)
00:00:00.506531 25 - AMD fast FXSAVE and FXRSTOR Instr.= 0 (0)
00:00:00.506532 26 - 1 GB large page support = 0 (0)
00:00:00.506532 27 - RDTSCP instruction = 1 (1)
00:00:00.506533 28 - Reserved = 0 (0)
00:00:00.506534 29 - AMD Long Mode = 1 (1)
00:00:00.506534 30 - AMD Extensions to 3DNow! = 0 (0)
00:00:00.506535 31 - AMD 3DNow! = 0 (0)
00:00:00.506536 LahfSahf - LAHF/SAHF in 64-bit mode = 1 (1)
00:00:00.506536 CmpLegacy - Core MP legacy mode (depr) = 0 (0)
00:00:00.506537 SVM - AMD VM Extensions = 0 (0)
00:00:00.506538 APIC registers starting at 0x400 = 0 (0)
00:00:00.506538 AltMovCR8 - LOCK MOV CR0 means MOV CR8 = 0 (0)
00:00:00.506539 5 - Advanced bit manipulation = 0 (0)
00:00:00.506540 6 - SSE4A instruction support = 0 (0)
00:00:00.506540 7 - Misaligned SSE mode = 0 (0)
00:00:00.506541 8 - PREFETCH and PREFETCHW instruction= 0 (0)
00:00:00.506542 9 - OS visible workaround = 0 (0)
00:00:00.506542 10 - Instruction based sampling = 0 (0)
00:00:00.506543 11 - SSE5 support = 0 (0)
00:00:00.506543 12 - SKINIT, STGI, and DEV support = 0 (0)
00:00:00.506544 13 - Watchdog timer support. = 0 (0)
00:00:00.506545 31:14 - Reserved = 0x0 (0x0)
00:00:00.506546 Full Name: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz
00:00:00.506546 TLB 2/4M Instr/Uni: res0 0 entries
00:00:00.506547 TLB 2/4M Data: res0 0 entries
00:00:00.506548 TLB 4K Instr/Uni: res0 0 entries
00:00:00.506549 TLB 4K Data: res0 0 entries
00:00:00.506549 L1 Instr Cache Line Size: 0 bytes
00:00:00.506550 L1 Instr Cache Lines Per Tag: 0
00:00:00.506550 L1 Instr Cache Associativity: res0
00:00:00.506551 L1 Instr Cache Size: 0 KB
00:00:00.506552 L1 Data Cache Line Size: 0 bytes
00:00:00.506552 L1 Data Cache Lines Per Tag: 0
00:00:00.506553 L1 Data Cache Associativity: res0
00:00:00.506553 L1 Data Cache Size: 0 KB
00:00:00.506554 L2 TLB 2/4M Instr/Uni: off 0 entries
00:00:00.506555 L2 TLB 2/4M Data: off 0 entries
00:00:00.506555 L2 TLB 4K Instr/Uni: off 0 entries
00:00:00.506556 L2 TLB 4K Data: off 0 entries
00:00:00.506557 L2 Cache Line Size: 0 bytes
00:00:00.506557 L2 Cache Lines Per Tag: 0
00:00:00.506558 L2 Cache Associativity: off
00:00:00.506558 L2 Cache Size: 0 KB
00:00:00.506559 Host Invariant-TSC support: true
00:00:00.506560 APM Features:
00:00:00.506561 Physical Address Width: 36 bits
00:00:00.506561 Virtual Address Width: 48 bits
00:00:00.506562 Guest Physical Address Width: 0 bits
00:00:00.506563 Physical Core Count: 0
00:00:00.506563
00:00:00.506564 RAW Centaur CPUIDs
00:00:00.506564 Function eax ebx ecx edx
00:00:00.506565 Gst: c0000000 00000007 00000340 00000340 00000000
00:00:00.506566 Hst: 00000007 00000340 00000340 00000000
00:00:00.506567 Gst: c0000001 00000007 00000340 00000340 00000000
00:00:00.506568 Hst: 00000007 00000340 00000340 00000000
00:00:00.506569 Gst: c0000002 00000007 00000340 00000340 00000000
00:00:00.506570 Hst: 00000007 00000340 00000340 00000000
00:00:00.506572 Gst: c0000003 00000007 00000340 00000340 00000000
00:00:00.506573 Hst: 00000007 00000340 00000340 00000000
00:00:00.506574 Centaur Supports: 0xc0000000-0x00000007
00:00:00.506575 Mnemonic - Description = guest (host)
00:00:00.506575 AIS - Alternate Instruction Set = 0 (0)
00:00:00.506576 AIS-E - AIS enabled = 0 (0)
00:00:00.506577 RNG - Random Number Generator = 0 (0)
00:00:00.506577 RNG-E - RNG enabled = 0 (0)
00:00:00.506578 LH - LongHaul MSR 0000_110Ah = 0 (0)
00:00:00.506579 FEMMS - FEMMS = 0 (0)
00:00:00.506579 ACE - Advanced Cryptography Engine = 0 (0)
00:00:00.506580 ACE-E - ACE enabled = 0 (0)
00:00:00.506581 ACE2 - Advanced Cryptography Engine 2 = 0 (0)
00:00:00.506581 ACE2-E - ACE enabled = 0 (0)
00:00:00.506582 PHE - Padlock Hash Engine = 0 (0)
00:00:00.506583 PHE-E - PHE enabled = 0 (0)
00:00:00.506583 PMM - Montgomery Multiplier = 0 (0)
00:00:00.506584 PMM-E - PMM enabled = 0 (0)
00:00:00.506585 14 - Reserved = 0 (0)
00:00:00.506585 15 - Reserved = 0 (0)
00:00:00.506586 Parallax = 0 (0)
00:00:00.506586 Parallax enabled = 0 (0)
00:00:00.506587 Overstress = 0 (0)
00:00:00.506588 Overstress enabled = 0 (0)
00:00:00.506589 TM3 - Temperature Monitoring 3 = 0 (0)
00:00:00.506589 TM3-E - TM3 enabled = 0 (0)
00:00:00.506590 RNG2 - Random Number Generator 2 = 0 (0)
00:00:00.506590 RNG2-E - RNG2 enabled = 0 (0)
00:00:00.506591 24 - Reserved = 0 (0)
00:00:00.506592 PHE2 - Padlock Hash Engine 2 = 0 (0)
00:00:00.506593 PHE2-E - PHE2 enabled = 0 (0)
00:00:00.506593
00:00:00.506594
00:00:00.506594 ******************** End of CPUID dump **********************
00:00:00.509556 VM: Halt method global1 (5)
00:00:00.509633 HaltedGlobal1 config: cNsSpinBlockThresholdCfg=2000
00:00:00.509736 Changing the VM state from 'CREATING' to 'CREATED'.
00:00:00.510260 SharedFolders host service: adding host mapping
00:00:00.510273 Host path '/home/mons/Cartelle condivise/Virtualbox/Windows', map name 'Windows', writable, automount=false, create_symlinks=false, missing=false
00:00:00.510521 Changing the VM state from 'CREATED' to 'POWERING_ON'.
00:00:00.510596 AIOMgr: Endpoints without assigned bandwidth groups:
00:00:00.510606 AIOMgr: /mnt/virtualbox/Windows/Windows.vdi
00:00:00.510723 Changing the VM state from 'POWERING_ON' to 'RUNNING'.
00:00:00.514198 Guest Log: BIOS: VirtualBox 4.3.16
00:00:00.514335 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:00.524130 ERROR [COM]: aRC=VBOX_E_IPRT_ERROR (0x80bb0005) aIID={480b372c-c0b5-4c23-9bd7-dcbb85b1594c} aComponent={Display} aText={Could not take a screenshot (VERR_NOT_SUPPORTED)}, preserve=false
00:00:00.531071 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0, flags=0x1
00:00:00.531129 UIFrameBuffer::RequestResize: Screen=0, Format=0, BitsPerPixel=0, BytesPerLine=0, Size=720x400, Sending to async-handler..
00:00:00.531175 UIFrameBufferQImage::resizeEvent: Format=0, BitsPerPixel=0, BytesPerLine=0, Size=720x400
00:00:00.531184 UIFrameBufferQImage::resizeEvent: Resizing to FALLBACK buffer due to format is invalid..
00:00:00.533627 AHCI#0: Reset the HBA
00:00:00.533706 AHCI#0: Port 0 reset
00:00:00.534173 Guest Log: BIOS: AHCI 0-P#0: PCHS=16383/16/63 LCHS=1024/255/63 67108864 sectors
00:00:00.534255 AHCI#0: Port 1 reset
00:00:00.534391 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:00:00.551320 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fcbc8000000 w=640 h=480 bpp=32 cbLine=0xA00, flags=0x1
00:00:00.551343 UIFrameBuffer::RequestResize: Screen=0, Format=843204434, BitsPerPixel=32, BytesPerLine=2560, Size=640x480, Sending to async-handler..
00:00:00.551380 UIFrameBufferQImage::resizeEvent: Format=843204434, BitsPerPixel=32, BytesPerLine=2560, Size=640x480
00:00:00.551390 UIFrameBufferQImage::resizeEvent: Resizing to directly use VGA device content..
00:00:00.650041 2D video acceleration is disabled.
00:00:00.650061 HID LEDs sync is not supported on this platform.
00:00:03.014547 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:03.014980 Guest Log: BIOS: Boot : bseqnr=1, bootseq=0023
00:00:03.016232 Guest Log: BIOS: CDROM boot failure code : 0003
00:00:03.016501 Guest Log: BIOS: Boot from CD-ROM failed
00:00:03.016842 Guest Log: BIOS: Boot : bseqnr=2, bootseq=0002
00:00:03.017867 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0, flags=0x1
00:00:03.017904 UIFrameBuffer::RequestResize: Screen=0, Format=0, BitsPerPixel=0, BytesPerLine=0, Size=720x400, Sending to async-handler..
00:00:03.017979 UIFrameBufferQImage::resizeEvent: Format=0, BitsPerPixel=0, BytesPerLine=0, Size=720x400
00:00:03.017998 UIFrameBufferQImage::resizeEvent: Resizing to FALLBACK buffer due to format is invalid..
00:00:03.022076 Guest Log: BIOS: Booting from Hard Disk...
00:00:03.421944 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007fcbc8000000 w=1024 h=768 bpp=24 cbLine=0xC00, flags=0x1
00:00:03.421972 UIFrameBuffer::RequestResize: Screen=0, Format=843204434, BitsPerPixel=24, BytesPerLine=3072, Size=1024x768, Sending to async-handler..
00:00:03.422038 UIFrameBufferQImage::resizeEvent: Format=843204434, BitsPerPixel=24, BytesPerLine=3072, Size=1024x768
00:00:03.422048 UIFrameBufferQImage::resizeEvent: Resizing to FALLBACK buffer due to format is invalid..
00:00:04.308262 RTC: period=0x200 (512) 64 Hz
00:00:05.764361 AHCI#0: Reset the HBA
00:00:05.779746 Guest Additions information report: Version 4.3.14 r95030 '4.3.14'
00:00:05.779796 Guest Additions information report: Interface = 0x00010004 osType = 0x0003A100
00:00:05.779854 Guest Additions capability report: (0x0 -> 0x0) seamless: no, hostWindowMapping: no, graphics: no
00:00:05.779944 Guest reported fixed hypervisor window at 0009d800000 (size = 0x2400000, rc = VINF_SUCCESS)
00:00:05.830383 AIOMgr: Flush failed with VERR_INVALID_PARAMETER, disabling async flushes
00:00:06.288518 Guest Log: VBoxMP::DriverEntry: VBox WDDM Driver for Windows 8, 64 bit; Built Jul 15 2014 17:44:23
00:00:06.288628 Guest Log: VBoxMP::DriverEntry: OsVersion( 6, 3, 9600 )
00:00:06.288873 Guest Log: VBoxMP::VBoxMpCrCtlConConnectHgcm: WARNING! :vboxCrCtlConConnect failed, rc (-2900)
00:00:06.288933 Guest Log: VBoxMP::VBoxMpCrCtlConInit: VBoxMpCrCtlConConnectHgcm failed with rc(0), 3D not supported!
00:00:06.288973 Guest Log: VBoxMP::DriverEntry: 3D is NOT supported by the host, falling back to display-only mode..
00:00:07.770392 OHCI: Software reset
00:00:07.770468 OHCI: USB Reset
00:00:07.808807 RTC: period=0x10 (16) 2048 Hz
00:00:07.820650 OHCI: USB Operational
00:00:07.823789 RTC: period=0x200 (512) 64 Hz
00:00:07.863023 EHCI: Hardware reset
00:00:07.863159 EHCI: USB Operational
Now if I downgrade to 4.3.14 it says me that module vboxdrv is not loaded (not true).
Can anyone help me to make the last version working?
Thank you in advance.

I updated succesfully but now I have another problem, when I try to share a folder it says me
[virtual-user@arch-vm_desktop sbin]$ sudo mount -t vboxsf Virtualbox /mnt/Virtualbox
/sbin/mount.vboxsf: mounting failed with the error: No such file or directory
I read on the wiki and it's written that the problem is the vboxsf module not loaded but
[virtual-user@arch-vm_desktop ~]$ lsmod
Module Size Used by
fuse 87446 2
nls_iso8859_1 12461 1
nls_cp437 16553 1
vfat 21231 1
fat 61984 1 vfat
mousedev 17272 0
ppdev 16782 0
serio_raw 12849 0
evdev 21544 7
e1000 130280 0
snd_intel8x0 34948 2
snd_ac97_codec 118704 1 snd_intel8x0
ac97_bus 12510 1 snd_ac97_codec
snd_pcm 88487 2 snd_ac97_codec,snd_intel8x0
snd_timer 26614 1 snd_pcm
snd 69340 8 snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm
mac_hid 12633 0
intel_agp 17432 0
microcode 22061 0
intel_gtt 17848 1 intel_agp
i2c_piix4 20857 0
psmouse 102792 0
pcspkr 12595 0
soundcore 13031 1 snd
parport_pc 26351 0
parport 35749 2 ppdev,parport_pc
battery 13356 0
ac 12715 0
button 12909 0
vboxvideo 12437 1
drm 258005 3 vboxvideo
i2c_core 50152 2 drm,i2c_piix4
vboxsf 41351 2
vboxguest 206301 8 vboxsf
ext4 501845 1
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86460 1 ext4
sd_mod 44356 3
sr_mod 21903 0
cdrom 47479 1 sr_mod
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 1 crc_t10dif
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ahci 29195 2
libahci 27158 1 ahci
ohci_pci 12808 0
ohci_hcd 42982 1 ohci_pci
ehci_pci 12512 0
ehci_hcd 69939 1 ehci_pci
libata 181553 2 ahci,libahci
scsi_mod 142915 3 libata,sd_mod,sr_mod
usbcore 199328 4 ohci_hcd,ohci_pci,ehci_hcd,ehci_pci
usb_common 12440 1 usbcore
i8042 18002 1 libps2
serio 18282 6 serio_raw,atkbd,i8042,psmouse
[virtual-user@arch-vm_desktop ~]$ sudo systemctl status vboxservice
[sudo] password for virtual-user:
● vboxservice.service - VirtualBox Guest Service
Loaded: loaded (/usr/lib/systemd/system/vboxservice.service; enabled)
Active: active (running) since sab 2014-09-20 11:40:18 CEST; 1min 41s ago
Process: 190 ExecStartPre=/usr/bin/modprobe vboxsf (code=exited, status=0/SUCCESS)
Process: 186 ExecStartPre=/usr/bin/modprobe vboxvideo (code=exited, status=0/SUCCESS)
Process: 159 ExecStartPre=/usr/bin/modprobe vboxguest (code=exited, status=0/SUCCESS)
Main PID: 204 (VBoxService)
CGroup: /system.slice/vboxservice.service
└─204 /usr/bin/VBoxService -f
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.000642 main OS...
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.000837 main OS...
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.001024 main OS...
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.001207 main OS...
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.001392 main Ex...
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.001394 main Pr...
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.001394 main Pa...
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.004342 main 4....
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.091214 automount V...
set 20 11:40:18 arch-vm_desktop VBoxService[204]: 00:00:00.092686 automount V...
Hint: Some lines were ellipsized, use -l to show in full.
[virtual-user@arch-vm_desktop ~]$ sudo mount -t vboxsf Virtualbox /mnt/Virtualbox
/sbin/mount.vboxsf: mounting failed with the error: No such file or directory
[virtual-user@arch-vm_desktop ~]$
Last edited by Mons1990 (2014-09-20 09:45:00)

AnyConnect VPN on Mac - Can't SSH to Virtualbox Virtual Machines

Hi,
I'm running AnyConnect version 3.1.05170 on my Mac. I'm also doing SW Development on multiple Virtual Machines on my Mac via VirtualBox. When I connect via VPN, I can no longer SSH to my Virtual Machines. I'm sure there is a rules setting or something that is killing my "Host Only Network" in VirtualBox so I can no longer access them. The worst part is that even if I Quit the AnyConnect Client, I still can't SSH to my Virtual Machines, so whatever rule is put in place doesn't go away when I disconnect the tunnel.
Has anyone witnessed this or have a suggestion on how to go about solving it?
Thanks,
- Curt

Hello,
I just encountered the same problem. To solve it, I checked the box "Allow Local (LAN) access when using VPN (if configured)" in the preferences of AnyConnect.
It's working fine for me but I am using Parallels and not VirtualBox.
Regards
David

Problem with installing Solaris Express Community Edition(Virtual Machine)

When I start my virtual machine to install Solaris Express Community Edition(X86 edition), it just displays an character interface
grub>
and there is no other useful information, so I don't know what to do next, does anyone can help?

Try seting "-jdkhome xxxxxxxxxx" in the ide.cfg file in your Forte \bin\ directory. Point it to the SDK install directory - that is, make "xxxxxxxxxx" the path to the SDK install.
You seem to be accessing a java.exe that is pointing to a location that is other than where jvm.dll is residing. This may get you to executing the correct java.exe.

Expanding root partition in Solaris 10 VirtualBox virtual machine

I am running a Solaris 10 u8 x86 64-bit guest as a VirtualBox VM on a WinXP x64 host. I was running out of space in the guest VM, so I used CloneVDI (http://forums.virtualbox.org/viewtopic.php?f=6&t=22422) to clone and expand the VM from 20GB to 30GB. Now I need to expand the / partition in the VM filesystem so that it sees the whole 30GB now available. What is the best way to do this within the Sol10 guest? Is there a way to simply add a new "extent" to the existing filesystem?
Thank you in advance...

sparcmaster wrote:
The virtual disk is now expandable to 40GB.Do you mean you've already expanded it?
prtvtoc /dev/dsk/c0d0s0* /dev/dsk/c0d0s0 partition map
* Dimensions:
* 512 bytes/sector
* 63 sectors/track
* 255 tracks/cylinder
* 16065 sectors/cylinder
* 2717 cylinders
* 2715 accessible cylinders*And here's the problem. The OS didn't care. This VTOC shows only ~20GB
16065 x 2717 / 2 / 1024 / 1024 => 20.81
The only way to change this is to blow it away and recreate it and hope your data survives. If you do it right it should, but you need to be prepared for it to not work.
You'd boot from alternate media (CD/DVD/network), then use 'fdisk' on the root drive. It'll have a 20GB Solaris partition on it. Destroy it and create a new one that is full size (40G).
Now run 'prtvtoc' on the drive again. If the number of sectors per cylinder is the same (just the number of cylinders increased), then you should be okay and able to continue. If the size of a cylinder changed, then your data will probably not be accessible.
Now take your original 'prtvtoc' output file and remove the line with slice 2 in it
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 6345675 37270800 43616474 /
1 3 01 48195 6297480 6345674
2 5 00 0 43616475 43616474 <=== Remove this line
8 1 01 0 16065 16064
9 9 01 16065 32130 48194Use 'fmthard' to reapply the slices.
# fmthard -s <vtocfile> /dev/rdsk/c0d0s2Check the disk and all the slices should be back.
Verify root filesystem is still present and okay
# fsck -n /dev/rdsk/c0d0s0If all that is done, then you're really close. Since the root slice is at the end of the disk, increasing the size is simple. Just go into 'format -> partition' and edit slice 0. Keep the start cylinder the same, but change the number of cylinders to use the rest of the disk. When done type 'label' and exit format. If done correctly you can now run 'growfs /dev/rdsk/c0d0s0' to increase the size. Reboot and everything should come up.
The worst part is that when you increase the Solaris partition, I don't believe there's a guarantee that the cylinder size won't change. When I've attempted this, I haven't had any problems, but I've always been ready if it didn't work. When it works, it does save time.
Good luck!
Darren

No support for floppy disks under Snow Leopard?

I suddenly am not able to use my floppy drive anymore. Granted, I seldom ever use it, but I wanted to just back up some small files, and inserted a disk into my external floppy drive, and I'm no longer allowed to write to a floppy disk. I have the little slider button in the unlocked position, and I was always able to write to a floppy with my old OS, Tiger. Now I have a new iMac computer with the most update version of Snow Leopard, and I cannot write to a floppy disk anymore. Does anyone else still have one of these, to tell me what is going on with it? Did Apple just discontinue support at all for floppy disks? I can still insert the disk and read what is on it, and even copy it to my desktop, but I cannot write to the disk. I've tried several different ones, and they all tell me the same thing. Under Info and Permissions, it says that I am only able to read the disk, and it won't let me change it at all. I guess if this is not possible anymore, I can just toss this device, but it pains me, because I'd still like to be able to use it. Thanks for any information you can provide.
Kristy

Hi Kristy
It sounds as though you have solved your problem but I have found a way to fully access floppy disks formatted as Mac OS Standard. This may not work for all though because I have access to a Windows 7 PC.
On my mid-2011 iMac running OS X 10.8.2 (Mountain Lion) I was trying to download and copy onto floppy disks (for an old Macintosh) some software downloaded from the internet.
I found, as you did, that I could read such disks via a USB floppy disk drive, but that I could not write to them.
Thanks to your post I realised that it was simply because such formats have only limited support in more recent versions of OS X.
There is software called MacDisk for Windows. I just ran it in Windows 7 running as my Bootcamp partition accessed via VMWare Fusion. The software is free to test (with some limitations).
I just successfully copied a file via it to a disk and then was able to read it on my iMac.
Hope this helps you, or anyone else looking to do such strange things.

Help Requested - Creating Solaris 10 x64 Virtual Machine on an ESX Server

Hi All,
I have been trying to create a Solaris 10 64 bit Virtual Machine on ESX and VMWare server Virtualization Platform.
One of the forum entries said - The installer doesn't really care. At every boot, the processor type will be determined and a 32-bit or a 64-bit kernel will be run (unless you override it)
I hence downloaded the iso from http://www.sun.com/software/solaris/get.jsp and I installed it. When I run uname -a command on the terminal, this is what is displayed -
SunOS unknown 5.10 Generic_127128-11 i86pc i386 i86pc
This indicates that the kernel is 32 bit right?
Please help me create the 64 bit VM.
Thanks in Advance,
Raj.

Hi,
I am having lots of trouble doing a jumpstart
installation of Solaris 10
on a T1000 Server.
My setup
Using Debian Sarge as the Jumpstart Server ( I have
used this machine to install Sol 8 and 9 on Sun
V240/210. Running TFTP Server, RARPD,
BOOTPARAMD,NFS.
T1000 - No OS installed.
Attempted an Install by doing - boot net -v install
Below is the screen output.
Rebooting with command: boot net -v install
Boot device: /pci@7c0/pci@0/network@4 File and args:
-v install
100 Mbps FDX Link up
Requesting Internet Address for 0:14:4f:21:b9:c4
Requesting Internet Address for 0:14:4f:21:b9:c4
100 Mbps FDX Link up
Using RARP/BOOTPARAMS...
Internet address is: 192.168.2.35
hostname: sun-server
domainname: milky
Found 192.168.2.1 @ 0:20:e0:65:48:3d
root server: 192.168.2.1 (192.168.2.1)
root directory:
/jumpstart/2.10/Solaris_10/Tools/Boot
Found 192.168.5 @ 0:d:56:10:13:28Don't see any problem here.
boot: cannot open kernel/sparcv9/unix
Enter filename [kernel/sparcv9/unix]:
Do it a favour. Go Sarge box and goto /jumpstart/2.10/Solaris_10/Tools/Boot
and check do you have required kernel (kernel/sparcv9/unix)
also check your privilege for the file please.
I think it is possibly not mounting the nfs share. I
have already changed the NFS_client variable to 3
under etc/default/nfs in the Boot directory.
I would appreciate any help or suggestions.

Microsoft Virtual Machine Converter 3.0 throws Cannot Enumerate Disk ERROR

I am running the Microsoft Virtual Machine Converter 3.0 to migrate Windows 2012 R2
SP1 virtual machine from VMware on to Microsoft Azure. I followed all the pre-requisites of the tool. But, when I run the MVMC 3.0 tool it fails in the Analyze Disk stage, and displays this error below:
10/14/2014 16:24:18 -07:00 [3] VERBOSE: Analyzing disk C:\azure_storage\MVMC\0\disk-1.vhd
10/14/2014 16:24:23 -07:00 [3] VERBOSE: Disk C:\azure_storage\MVMC\0\disk-1.vhd is bootable
10/14/2014 16:24:30 -07:00 [3] VERBOSE: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException:
The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException: Could not enumerate volume with disk number "1".
at Microsoft.Accelerators.Mvmc.Engine.Volume.WinVolumeFinderService.GetWinPaths(UInt32
diskNumber)
at Microsoft.Accelerators.Mvmc.Engine.InjectionRejection.FirewallUpdater.UpdateFirewallRules(IOwnedVirtualDisk
virtualDisk, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PostConversionTouchupService.UpdateFirewallRules(String
bootDiskPath, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
--- End of inner exception stack trace ---
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
10/14/2014 16:24:30 -07:00 [3] EXCEPTION: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException:
The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException: Could not enumerate volume with disk number "1".
at Microsoft.Accelerators.Mvmc.Engine.Volume.WinVolumeFinderService.GetWinPaths(UInt32
diskNumber)
at Microsoft.Accelerators.Mvmc.Engine.InjectionRejection.FirewallUpdater.UpdateFirewallRules(IOwnedVirtualDisk
virtualDisk, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.PostConversionTouchupService.UpdateFirewallRules(String
bootDiskPath, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
--- End of inner exception stack trace ---
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest
machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
10/14/2014 16:24:30 -07:00 [3] Exception caught : Microsoft.Accelerators.Mvmc.Engine.VolumeMvmcException:
Could not enumerate volume with disk number "1".
at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()

Same issue here. We DID have spanned disk over 2 x VMDKs but I have fixed that issue now and problem persists. The one thing I have yet to try is installing VMWare Tools - they were uninstalled on a previous failed conversion and I am getting an error saying
"VERBOSE: Microsoft.Accelerators.Mvmc.Engine.DiskCopyFailureException: The virtual disk(s) attached to the source virtual machine were not successfully converted to VHD(s) and copied to the workspace folder path. ---> Microsoft.Accelerators.Mvmc.Engine.DisablingNonWindowsGuestVHDException:
The virtual hard disk C:\Temp\MVMC\0\disk-0.vhdx on which you are trying to disabling VMWare tools, is not a valid Windows-guest OS virtual hard disk. (Are you trying to disable a virtual hard disk with Linux-guest or other OS in it?)"
I am about to install the tools and try again under advice from our partner

Virtual disk consistency error due to the Linux virtual machine virtualization host location ?

Environment
- windows server 2012 r2 Hyper-v failover clustering configuration
Installing CentOS 6.5 as a guest OS
Virtual machine is up on clustering , that information and virtual disk in the CSV .for the virtual machine .
1 of 1 showed the data virtualization in a virtual machine when there is a CentOS virtual machine on a host , the data of one of the virtual machine does not look after migrating to twice the virtualization host .
Do you have any experiences you had one of the above ? The workaround ?

Hi Leon,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards
Jeremy Wu

Solaris 8 Floppy Disk Drive Problem

Hi to all!, I need help with Solaris 8 10/00 Intel. I�ve installed it and everything works fine, but I cant make the system to recognize the floppy disk drive, everytime I do a "volcheck", it just ignores it. Inside CDE happens the same thing, when I do check the floppy, nothing happens. Any clue?. I�m using an AMD Athlon 700, with VIA KT133 chipset. Thank a lot!.

Try "ftp" + your email address. (but "anonymous" works, too).
Perhaps a typo or there was some other temporary problem with the
web site.
The K7M boards have different bios release numbers, it seems the
first bios release had a revision number of 1007:
ftp://ftp.asus.com.tw/pub/ASUS/mb/slota/k7m
Do you have to boot using the DCA floppy for some specific reason?
(for example to install using the >32GB ide-drive patch; network install
and no local cdrom drive; El-Torito CDROM boot does not work at all)?
Or do you have the system already installed by booting from CDROM,
and you just want to get usable floppy/serial/parallel ports under
solaris 8? In that case have a look at http://www.tools.de/solaris/via/. I've written a small driver that attaches to the VIA
686A SouthBridge PCI/ISA device and it re-enables the Super-I/O
controller on that chip. The Super-I/O chip is disabled due to the
solaris ACPI bug and is the reason all these on-board devices do
not work under solaris 8. According to
http://www.asus.com.tw/products/Motherboard/SlotA/k7m/spec.html, the K7M uses the same SouthBridge chip, so my driver should work for
this board, too.

Solution towards floppy disk access problems

Some computer cases have metal front plates which must be bent/removed so that one may install floppy disk drive. When one bends the metal front plate, make sure the metal front plate is bent far enough so that it CANNOT contact the floppy disk's drive.
More specifically, if one takes a look at the bottom of floppy disk drive, one may notice a circular disk which must be able to spin freely in order for the floppy disk drive to function. Now, will with some computer cases, there may be a considerable distance between the case's metal front plate and the "true front" of the computer case.
When this is true, and if the computer's "metal front plate" is not bend far enough, the metal front plate may contact the "drive" located at the bottom of the floppy disk drive, stopping it from spinning. As a result, one cannot boot to floppy, and, when one boots to Windows and places a floppy disk in the floppy disk drive, the floppy disk drive access lite stays lit and Windows Explorer prompts one to insert a floppy disk; both of which give the impression that the floppy disk drive is not functioning.
And depending upon tempuratures, etc., this may occur sometimes, but not others. And installing a new floppy disk drive, using new ribbon cable, etc. may, or may not, help; that is, except in the instance when installing new one should "happen" to bend the front metal plate a bit more than previously. But if only slightly, the problem may return again with time.
So, if one has an issue reading floppy disks, make sure any metal front plates are bent far out of the way.
Regards,
stevestechresource

I second that pterhune
I would say that this article describes handling of cheap cases as Q-tec, I know there are others as well, but some of Q-tec's cases have really cheap metal. It bends if you look hard at it

Creating a floppy boot disk for solaris 10

Hi
I have downloaded the Solaris 10 x86 DVD and and cd ISO from the Sun download site. However my PC doesnt boot from the CD Rom.
Is there a way to create a bootable floppy to install Solaris?
any tips regarding the above very welcome.
thank you in advance
tesh

Hi
I have downloaded the Solaris 10 x86 DVD and and cd ISO from the Sun download site. However my PC doesnt boot from the CD Rom.
Is there a way to create a bootable floppy to install Solaris?
any tips regarding the above very welcome.
thank you in advance
tesh

Is there an Apple approved device that will allow me to access photos on 3.5" floppy disks?

I have family photos on 3.5" floppy disks that I want to transfer to iPhoto. Is there an Apple approved device to do so? Thanks for your help!

The only problem that I could foresee is that the 3.5" disks may not be in a current Apple format of HFS+. You're probably safe if they're 1.44MB floppies but if they're 400-800K floppies - in the older HFS format you should still be able to read files from the disks with no problems, but no writing back to or erasing the disks.
I remember going through all the trouble with my SyQuest and ZIP disks, too!
Good luck,
Clinton

HP Proliant 380 G4 / SmartArray 6 / HP driver / No Floppy disk.

Hello!
And here I am with a "nice" problem:
I want to run Solaris on a HP Proliant 380 G4 series with SmartArray 6. HP kindly provide drivers for Solaris 10 on their homepage. Those drivers need to be extracted to a floppy disk. Now here is where the trouble starts: I do not have a floppy disk drive for ther server nor is it easy to just plug one in. I've tried a USB floppy disk drive which at least got me as far as the first part of the installation. It then fails when it tries to actually install the driver onto the system as it does not know anything about USB drives.
I somehow need to inject the driver to the system without having a floppy drive. I'm not sure if you can do this on installation or by somehow copying the files onto the installation ISO or using jumpstart.
Any clues or hints how this might work would be very much appreciated. I'm sitting here with my head spinning.
Thank you very much,
Georg

<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>rogerisland wrote on Fri, 03 June 2005 11:25</b></td></tr><tr><td class="quote">
>That is, you can boot Solaris from the install CD (or DVD) together >with
>HP's driver from the ITU floppy in the USB floppy drive, and copy >Solaris to
>the raid array. And after that, the Solaris installer tries to mount the >ITU floppy
>(to copy the raid array driver from the floppy to the raid array), but >fails
>because no PS/2 floppy device /dev/diskette is present?
Basically, yes (and I want to install Solaris 10 on x86)
</td></tr></table>
OK, Solaris 10 should have less issues with USB floppy support than
older Solaris 9 or Solaris 8 releases.
<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Quote:</b></td></tr><tr><td class="quote">
I have to use the console installation (without the GUI) because the interactive one hangs at the end of the disk.
</td></tr></table>
Yep, that's a known bug in the Solaris 10 x86 GUI installer. It didn't
exist in Solaris 9 x86 and older.
When the GUI installer is in use, the final step of installing the extra
driver from the ITU floppy prompts for something on /dev/console,
but with the S10 installer GUI running there's no way to type
/dev/console input.
<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Quote:</b></td></tr><tr><td class="quote">
Another problem is that the installer tries to copy the driver to the array before disc 1 is finished (after it installed all the files though) where no reboot is attempted.
I'd like to try your suggestion though.
Is it possible to fire up a shell if I use option 3 on the installer (console install in GUI) or interactive shell (option 1) (if it wouldnt hang..but maybe it hangs BECAUSE it tries to access the disk) ?
</td></tr></table>
If the GUI installer is running, right click on the desktop and open a
"Terminal" window, to get a shell.
If you run the "ptree" command when the installation has stopped after
copying the packages from CD1 to the HDD, you should notice the
following processes:
<div class="pre"><pre> 2678 /usr/sbin/install.d/pfinstall -f /swap2 -s /dev/dsk/n 9335 sh -c /sbin/sh /tmp/diskette_rc.d/icdinst9.sh 9336 /sbin/sh /tmp/diskette_rc.d/icdinst9.sh 9345 sh /tmp/diskette_rc.d/inst9.sh 9348 sh /tmp/diskette_rc.d/inst9.sh</pre></div>
The last one ("inst9.sh", PID 9348 in my case), is blocked in a read()
system call waiting for data from /dev/console (this can be verified with
"pstack $pid" and "pfiles $pid").
You can use "kill -9 $pid" to stop that inst9.sh process which hangs the
installer.
Before you kill inst9.sh, manually mount the ITU floppy from the USB
floppy drive and install the raid drivers manually.
Btw.: I'm not 100% sure, but the installation from CD1 is probably
complete anyway and the only thing missing is the raid array driver from
HP's ITU floppy. In this case it should be sufficient to boot into single user
mode from the S10 x86 installation CD/DVD (but don't forget to add HP's
raid array drivers from the USB floppy). At the "select type of installation"
prompt (options 1 .. 4) use "b -s" to boot into CD single user mode.
On the single user shell, mount both the the raid array and the UFS floppy
and use the "install.sh" script on the ITU floppy to install the missing
raid array driver to the raid array.

Accessing floppy disk in Solaris 10 u5 VirtualBox Virtual Machine

Similar Messages

Maybe you are looking for