Accessing hard drives connected by airport remotely

Hi
I have two large hard drives connected to my airport extreme that I would like to have access to remotely. I have enabled file sharing and can acces the files over my wifi connection. Also I have enabled "remote file sharing" and can access these drives via the following workflow. Go To Server > "afp://10.0.1.1" ..... I would like to be able to access these files in a similar fashion as "Back to my Mac" but without mobile me. I am a bit of a networking novice, so I may be unclear on several things:
Do I set up an external ip address for my airport extreme or is there one for it already?
Do I need to setup a dns, domain name or somehow register this ip address via dyndns.org?
Do I need to setup an appletalk protocol?
Do I need to contact my ISP and make arrangements through them to have this work?
Do I need to set up a Leopard server on a Mac mini for this to work...
Any advice, of direction to head in this matter would be much appreciated!
thanks

>Setup an out of range DHCP reservation (10.0.1.201)
Actually with DHCP Reservation, the IP address should be within the DHCP range. The reservation feature makes sure that this IP is not provided to any other network client, i.e., it is reserved to one specific client by its MAC address.
Ok, so let's go over the basic steps to see if anything was missed.
Start the AirPort Utility > Select the AEBSn, and then, note the IP address shown.
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Disks, and then, select File Sharing.
Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
Verify that Secure Shared Disks = With a disk password. (Recommended)
Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
Click on Update.
To connect to the shared AirPort Disk from a remote location using a Mac:
From the Finder > Go > Connect to Server.
Enter the DynDNS-provided Domain Name or Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
Click Connect.
You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
Click Connect.

Similar Messages

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

Remotely Access Hard Drive Connected to ABS

Hello all, I apologize in advance if this question is in another thread, I haven't been able to find it.
Can someone walk me through the steps to remotely access my external hard drive that is connected to my Airport Base Station (802.11n) from the internet? I open the "connect server" window from a different wifi source and put in my IP address but it never works. I think I have the right IP address, not sure, it's the one I found in my modem settings. My set up entails a DSL modem connected to my ABS and the hard drive connected to that. I have "Share disks over Ethernet WAN port" checked too.
Is there a guide somewhere? Again, thanks in advance!
Tim

I went to http://www.canyouseeme.org/ from my home and it said that it couldn't see port 548 (connection timed out) so I guess it was blocked. I can't turn my firewall off on my modem, very lame, (it's an Actiontec and I have Qwest DSL) so I put it on low, checked again and this time it says it was refused. My IP address changed too which I guess happens every time I reset it.
I will try and contact my provider and see if they are blocking that port.
Should I have Apple Talk turned on? or is that for something different?
Thanks Again
Tim

Can i access music on my hard drive connected to airport extreme with my iphone 5

Can I access photos and music on my usb hard drive connected to an airport extreme using an iPhone 5? I can access theme with mac and pc.
Thanks, Kevex.

Yes, but not out of the box. You have to download an app like FileBrowser.

Using Time Machine w/external hard drive connected to airport extreme

I hooked up an external hard drive on my airport extreme. I see it in sharing, however, Time Machine doesn't recognize it as a back-up drive unless I have it directly connected to my MacBook Pro. How do I get Time Machine to recognize the external drive when it's connected to the airport?

FWIW, the AEBS has known problems sharing a directly connected HD. Take a look over in the AEBS forums, and you'll see that this is a very common problem. Perhaps Apple will update the firmware and rectify this problem.
Cheers,
Andreas

Can a PC share a hard drive connected to Airport Extreme?

I have a new Airport Extreme with a Seagate FreeAgent Desk for Mac 1.5 TB hard drive connected via USB. The Airport connects to the internet via a Linksys Vonage router, and two Macs are set up to use the Airport via wireless. The FreeAgent drive has 4 partitions: 1 for a TimeMachine backup from both Macs, 2 for SuperDuper backups of both Macs, and 1 for home video files and other backups. I also have a Dell PC running Windows XP SP2 hardwired to the same Linksys Vonage router.
I'd like to use partition 4 on the FreeAgent drive to backup the PC. Is this possible, and if so, how do I get the PC to recognize the FreeAgent drive?
Thanks very much for your help.

dwhewlings, Welcome to the discussion area!
Yes, you need to use Bonjour for Windows.

External hard drive connected to Airport Extreme not working on PC

I have a Macbook Pro running 10.9.1 and my work laptop, which runs Windows 7. I have a WD 2TB external hard drive connected to my Airport Extreme, with 1TB formatted for Mac and the other 1TB formatted in FAT format. My Macbook can connect to the drive and read/write perfectly fine, but I'm not even seeing the drive on my PC anywhere. I'm wanting to use the Mac formatted partition to backup photos and personal documents and the FAT partition to backup my work.
Is there a setup thing I need to do on either the Airport Extreme or on my PC to connect to have the drive visible? Both drives are setup to allow file sharing and my Airport Extreme is running version 7.6.4.
Thanks!

There are 3 different methods to establish a connection from your PC to the hard drive in this Apple support document:
http://support.apple.com/kb/HT1331

Two hard drives connected to Airport Extreme. How to include one of them in TimeMachine Backup and use other disc as Time Machine backup disc?

Hi,
the title says it all. I've got an airport extreme and two hard drives connected to it. My idea was to use one as my additional storage (say DISC STORAGE) and the other one as my backup drive (say DISC BACKUP). I would like to backup my mac AND DISC STORAGE together to DISC BACKUP using time machine. My mac has 256 GB HDD, DISC STORAGE is 1 TB big, DISC BACKUP 2 TB. So there are no space issues.
Problem: DISC STORAGE is not included in Time Machine's backup to DISC BACKUP. At the moment, only the mac is backed up to DISC BACKUP.
Does anybody know if and how I can include DISC STORAGE in the backup process?
By the way, DISC STORAGE is not listed in the "exclude from backup" list in Time Machine.
Thanks!
Arne

Unforrtunately, Time Machine cannot backup from a network drive to another drive. Time Machine will only backup a Mac and a drive that is directly attached to the Mac, via USB or FireWire.
You will need to use an application like Carbon Copy Cloner or SupoerDuper to be able to backup from DISC BACKUP to DISC STORAGE.

Connecting to an external hard drive connected to airport extreme via usb

I have two computers running off my airport extreme base station. I have a desktop computer connected via an ethernet connection and i have a laptop that connects wirelessly. I have an external hard drive connected via the usb on my Airport. I installed my airport disk utility software on my desktop as it is the computer i store all my itunes material on and it syncs to my ATV. I am able to see my external hard drive as a networked drive on my desktop, and it works fine. However i am not able to see the networked drive on my laptop. I am running Norton 360 on both machines and both machines are running Windows Vista.
Do I have to install the Airport Disk Utility on both machines? I have read thru lots of threads about this and have not been able to solve this problem. I have gone into my firewall settings and allowed file sharing on my laptop. I cannot think of anything else to do. Any help would be greatly appreciated as this is the main reason I purchased my Airport Extreme.

I have exactly the same set-up, but I can see the portable drive with my MacBookPro but not with the PC connected by an ethernet cable to the Airport Extreme. How did you get the PC to see the portable drive on the Airport?

Backup an external hard drive connected to Airport -- is this possible?

Currently I have a hub connected to my airport extreme. There are 2 external hard drives connected to the hub. One has my iTunes library on it, and the other is being used for time machine backups.
I have no problem doing the backup wirelessly to the one hard drive. In time machine, I could pick either external drive to back up to. What I am trying to do is back up the external drive too. Time machine is only seeing the hard drive on my laptop. The exclude list is blank and when I try to add the itunes HD to the exclude list (to remove it), it won't let me select it-- it is greyed out.
If I connect the itunes HD directly into my laptop, I can run the backup, but that is not very convenient. Is what I am trying to do possible? Does anyone have any ideas? Are there any other posts discussing this (I could not find any with my specific problem).
Thanks!

nealmay wrote:
Currently I have a hub connected to my airport extreme. There are 2 external hard drives connected to the hub. One has my iTunes library on it, and the other is being used for time machine backups.
I have no problem doing the backup wirelessly to the one hard drive. In time machine, I could pick either external drive to back up to. What I am trying to do is back up the external drive too. Time machine is only seeing the hard drive on my laptop. The exclude list is blank and when I try to add the itunes HD to the exclude list (to remove it), it won't let me select it-- it is greyed out.
That's correct. Time Machine will not back up a network drive (see #2 in the Frequently Asked Questions *User Tip* at the top of this forum).
You're going to need a different app. Which one will depend on where you want the backups to go; some apps will not back-up from a network drive; others won't back up to a network drive. I don't know, offhand, of any that will do both. Perhaps Kappy, V.K., or others will.
For backups to a local disk, try either CarbonCopyCloner (which I use to make a full bootable "clone" in addition to Time Machine), and I think SuperDuper will do this as well. CCC is donationware, so you can try it for a while, then send them some $$ so they can keep it current. It can be scheduled to run automatically, and you have the choice of it keeping only current copies or to archive prior versions as well. SuperDuper has a free version, but you need the paid one (about $30) to do scheduling. I don't know if it will keep archive copies.
There are many other backup apps, some of which will handle network drives. Check Google, VersionTracker.com, or MacUpdate.com.

How do I access my hard drive connected to airport extreme?

I've already imported video to my hard drive. I had it previously connected via firewire. It's there in an imovie 08. However, when I open up imovie in the "Event Library" panel, my hard drive has a yellow triangle with an exclamation point on it. Does anyone know how I can access this?
Do I have to choose "import" first and then copy the movie back into imovie? I think this would defeat the purpose of storing the footage on the external drive, right? I'm trying to make my first movie, so please be gentle if this is an easy question to answer. It's throwing me for a loop right now.
Thanks again!

sorry, the hard drive is connected via USB to my airport extreme. Here's how i can look at the files:
Macintosh HD, under "shared" i select my hard drive, open it and then click on imovie events, then i can access the 19 different folders which contain multiple clips in each folder, along with an imovie thumbs file etc.
However, in imovie when create a new project, then click on import, it will ask me where i want to save the files, and on the drop down arrow, the only choice is my macintosh HD and I can't choose anything else. I really don't want to save them to my computer's hard drive if i don't have to. It seems there should be an easier way to do this, but i'm overlooking something. I just want to be able to make a movie with the clips that are already saved on my hard drive which is connected via airport extreme. Thanks again!

Access external hard drive connected to Airport Extreme USB via Windows & Mac

I have an Airport Extreme and I would like to connect an external hard drive to it via USB so that I can backup pictures, music, documents etc. I need to be able to see the external hard drive from my windows PC. I eventually will be buying a Mac so I would like to be able to also get to my pictures and documents via the MAC as well.
I currenlty have an iPhone, iPad and Apple TV so getting to the external drive from these devices would be a huge bonus also if that is possible.
I recently bought an ioSafe Solo External Hard Drive and I had to return it because it was only formatted for the PC. When I plugged it into my Airport Extreme, I could see the drive via the Airport Disk Utility but I could not see it from my PC and I could not map a drive to it. When I contacted ioSafe support, they said that what I was trying to do was not possible since I did not have a MAC available to me to reformat the drive.
I hope that I am not trying to accomplish the impossible because I will always need to live in a MAC/PC world.
Any help would be greatly appreciated. Thank you for your time!

You must know people with Macs.. it is 2min work to plug a USB drive into a Mac Laptop and format it Mac OS extended with a quick format.. And that is better IMHO than buying a utility or buying a pre-formatted drive which are often more expensive for no very good or obvious reason.
Another option is a Linux boot disk.. Linux distributions have very similar command line tools to the Mac OS. (some are identical) and HFS+ has been available for ages in Linux.

How do I find a hard drive connected to Airport Extreme Base Station?

*Apple Says:* "If your base station supports it, you can connect a USB hard disk to the USB port on your base station and computers on your network (both wired and wireless) can connect to it to access, share, and store files and data."
Cool. So I followed the instructions. The drive is recognized by the base station and listed in the Airport Utility. It looks like it's ready to go...
So... How do I access the drive? I don't see it on my desktop, it's not under network. I've tried "Connect to server..." and browsing, I can't see the drive, anywhere. Yeah, I've searched the crap out of this issue on google and this message board as well as apple support knowledge base. I'm sure this is a simple issue and I'm just missing the obvious. Help me out.

Hello Timothy Uhl. Welcome to the Apple Discussions!
Try the following to mount the disk...
o Click on the Desktop to enter Finder
o Go > Connect to Server...
o Enter 10.0.1.1 for the server
o Enter Disk Password
o Connect
If this still doesn't solve the problem, let's double-check your disk sharing settings...
AirPort Extreme Base Station (AEBSn) - File Sharing Setup
Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
Disks - File Sharing
o Secure Shared Disks: <With disk password | With base station password | With accounts >
(Note: Choose "With a disk password," or "With base station password" if you want to secure the shared disk with a password, or choose "With accounts" if you want to secure the disk using accounts.
If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk.)
o Guest Access: <Not allowed | Read only | Read and write>
o Share disks over Ethernet WAN port: (unchecked)
(Note: Select the "Share disks over Ethernet WAN port" checkbox if you want to provide remote access to the disk over the WAN port.)
o Advertise disks globally using Bonjour: (unchecked)
o Workgroup: <Windows workgroup name>
o WINS server: <WINS server IP address>

IMac Media Server, or External Hard Drive Connected to Airport Extreme?

I would like to create a central repository for all of my movies/music which I would like to stream to an apple tv. For now, it is all iTunes compatible stuff. At the same time, i want to be able to access those media files from my iPad, iPhone, and other Mac machines throughout my house.
I currently have an iMac that is not often used. I had an idea to use it as a media server through which I could stream all of my media to the apple tv. The plan would be to buy a 3 or 4 TB hard drive, and connect the hard drive directly to the iMac (ideally via firewire), and then upload all of my movies/music to the hard drive, while keeping the libraries intact on the iMac. In addition, I would like to keep the library on my MBP, but direct the hard drive to utilize the media files on that same hard drive (so, essentially, using one set of media files, in two iTunes libraries). This way (I'm thinking), I should be able to stream my media from either library on my Apple TV (but in reality, the media is all on the one hard drive) and to my iDevices in my home.
The other option I have come up with is to connect a hard drive on the network, directly to the airport extreme (probably via USB, unless someone knows of a GE drive that is not a pre-formatted NAS server). Then I would hope to link the media libraries on both computers through to the media files stored on the hard drive.
So the questions I have are:
Which is the better set up for home streaming? Will one be faster than the other?
Is there a better way of doing this?
If I downloaded the Plex Media server to the iMac in the first option, would I be able to access all of the media on my Smart TV w/o the Apple TV?
Thanks in advance for your input.

Which is the better set up for home streaming? Will one be faster than the other?
Both will be about the same. The issue I would be sure to look at is how well the external hard drive's wake from sleep mode works. It is annoying if the drive sometimes goes to sleep and will not wake up without you waking over to the computer.
The direct connect via firewire is a slightly faster more reliable option, but not really something you will notice given the ATV would only need a fraction of the bandwith either have.
The more important thing for performace woudl be to use eithernet instead of WiFi. You will make your life a lot easer if you do not try to do streaming HD video over WiFi.
If I downloaded the Plex Media server to the iMac in the first option, would I be able to access all of the media on my Smart TV w/o the Apple TV?
No. ATV can only see content that is in your local iTunes setup or in iCloud. So in of these setups you will need the content on these drives to be added to iTunes.

Accessing hard drives connected by airport remotely

Similar Messages

Maybe you are looking for