Accessing Image on the scanner and load image to form scren

Hi,
Iam working with Developer 2000 with Forms 6i.
I want one information.
I want to access the scanner through D2k Form and i have put that image which is one the scanner to image item place on theform.
so please guide how to do this one
waiting for ur reply
so please give reply to [email protected]
Eagerly waiting for the reply
Thanks & Regards
durga rao

Find out what interface the scanner has (OCX probably) and use OLE2 to activate it.
Then use read_image_file built-in to read the scanned image file to the Form.

Similar Messages

  • May I know, how to coneect the scanner and printer to ipad?

    We want to know how to connect the scanner and the printer to ipad?
    And how to use the internet on ipad?
    Kindly let me support the method.
    Thank you so much!
    Best regards,
    Tin Tin

    You can't connect a printer or a scanner to a iPad, you can print using AirPrint with a compatible printer.  The internet setup is here in this link. http://manuals.info.apple.com/en_US/ipad_2_user_guide.pdf

  • Starting yesterday I can scan a pdf file in from the scanner and can not send a pdf in an email attachment

    Starting yesterday I can scan a pdf file in from the scanner and can not send a pdf in an email attachment.  What happened?  Windows 8

    Adobe Reader can't scan documents. What software do you use?

  • TS3274 When viewing pick lists from different web sites my iPad2 selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

    When viewing pick lists from different web sites my iPad 2 (safari) selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

    With your playhead over the clip in the timeline and that V track's 'track selector' as the only one active...hit the 'f' key.
    This will load the original clip into the viewer at the matching point of the frame in the timeline.
    K

  • I was restoring my iTouch and accidentally unplugged it and now it is stuck at the logo and loading bar under it.  I can't go into DFU because the home button doesn't work.

    I was restoring my iTouch and accidentally unplugged it and now it is stuck at the logo and loading bar under it.  I can't go into DFU because the home button doesn't work.  How can I fix it?

    - See if placing the iPod in recovery mode with this program will allow a restore.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Next let the battery fully drain. After charging for at least an hour try again.

  • When I go to my webpage it comes up blank I right click to get the page info and it is not showing the media and load images is checked

    I have an online business and when I go to my websites they come up blank. I went to the same site on my other pc and it loads just fine. When I checked the page info and compared the two the one that loads ok shows general, media, permissions and security and the other shows everything but media. How can I get this back? I've checked everything I can think of. Load images is checked

    According to http://en.wikipedia.org/wiki/IPhone_5
    the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
    It does not use SD cards.
    Fake iphones are really Android phones using the skin of iOS6.
    Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
    But if you are directed to Google Play, then I'm afraid you've gotten a copy.

  • My HP scanner/printer scans but my iMac doesn't seem to accept the scans in either iPhoto or Pictures.  I've got os 10.6.8 and all the latest sofware updates for the scanner and for iPhoto.  Helpv

    My Hp printer/scanner C5280 used to work fine with my iMac with OS 10.6 but lately after doing the scan it doesn't seem to finish by putting the scan in either iPhoto or in pictures.  I have all the latest sofware updates for both devices. The scanner does the "preview" scan right away and the copier works fine.  Is there some setting I am overlooking?

    Try using Image Capture, you will find it in your Applications folder. In either IC or the method you are using you can tell the application to scan to a destination. It will look similar to:
    If you still have trouble give AppleCare a call or visit your local Apple Store Genius and they can walk you through it. Your problem may be the at you are not defining anything in the preview to be scanned, you do this by dragging the mouse over the area you want scanned and it will draw a box around it.  Here is a screen shot that show's that.

  • Is it possible to add an HP all in one printer to my vetwork via UBS on an Airport Extreme so that the scanner and print functions are available over the network?

    Im very new to this "networking thing" so your patience is welcome. I have managed to get the Time capsual AE up and running and thanks to bonjour I have a printer via USB working. However, its an all in one machine and I can not work out how to get the scanner to work over the network - or even if its possible. Is this possible?

    No, you cannot scan over the network, unless the printer has network capability.. in which case the printer must connect via ethernet or wireless not USB.
    All USB printers are designed as local printers not network.

  • I get "HTTP Error 400. The request is badly formed." when trying to access a URL that I have accessed previously in the day and works OK with IE.

    Hi
    I accessed the site earlier in the day but when I came back to it I got the above message. Tried to access the site in IE and all worked fine. Tried disabling DNS prefetch and clearing out history but to no avail. I ran a virus scan but with no threat detected.

    That issue can be caused by corrupted cookies.
    *http://kb.mozillazine.org/Cookies
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • Creating the outline and Loading data for TBC in 11.1.2.2

    Hi all, feelin kinda dumb here because this task really should not be as difficult as it seems.
    I am trying to Load the TBC application in 11.1.2.2 Essbase. I have followed the documentation to
    1. Install EIS
    2. create the metadata repository and load the xml file provided
    I now need to create the essbase cube from this metadata repository, I cannot seem to find any real steps as to how to do this, everything I found was pertaining to creating the repository. Can anyone help define what needs to be done and what steps I need to take, I am new to EIS and Studio so the simpler the better :)
    thanx

    thanx, this did give me a better understanding of essbase studio, thank you. It did not help so much as getting the structure and data from the repository into essbase. For that from what I understand I can import models from EIS (where I loaded the TBC) one. In doing this I get an error saying that it cannot find any models (which I know are there because I can look at them in EIS. Unfortunately, looking over other posts, I installed Studio on a 64 bit server, which may be the issue I am facing (I hope)
    I am going to try and reinstall studio on a 32 bit platform and try the import again.

  • TS1702 Phone stuck on the updating screen. Black with the apple and loading bar.

    Updated to iPhone ios6. It started uploading the software. Iphone screen black with the apple and the loading bar. It's stuck there. Won't do anything. Itunes doesnt even recognize it anymore.

    iOS: Unable to update or restore

  • Where has the Setup and Load Guide gone?

    Hello experts,
    In the past I helped implement our CRM 3.0 and 4.0 systems.  At the time we had some very helpful guides (.pdf) which allowed us to configure the basic exchanges between R/3 and CRM.  They were called:
    Implementation and Configuration Step by Step
    Setup and Load Guide
    We are now going through a new CRM 7.0 fresh install and I am looking for those very same guides but updated for CRM 7.0.  
    At first someone pointed us to the building block guides "http://help.sap.com/saap/sap_bp/CRM_701_XX/Html/index.htm" but those do not appear to be the same content from what I recall in the older versions.  They look to help you establish a quick "default" type system even telling you values to plug in.  This was very different from the older versions where it explained step by step how to connect to R/3 and pull in values.
    Someone then told us that "those guides are in Solution Manager now" but not being overly knowledgeable in SOLMAN I cannot seem to find a way to locate them.
    Even in IMG in CRM 7.0 we see several references specifically saying "CRM Setup and Download Guide".
    Can someone please help me locate the latest versions of those guides.
    Thank you very much for your help.

    Andrei,
    Thank you for your response.  You are the second person to mention "Solution Manager documentation" as a way to obtain such information.  Can you elaborate on how you go about obtaining that type of information through Solution Manager?
    We were given guidance to find such documentation through the "accelerator tab" under Project Scope -> Roadmap but we are unable to find that tab.
    Please advise if that was what you might be referring to or something else.
    Thank you very much for your help.

  • By using OID how to unzip the folder and load bunch of .csv files

    Hi All
    bellow is the my scenario.
    in my scenarion we have created FTP folder that will load the .zip files(Every Day).
    .zip files that will contain bunch of .csv file (flat files) and by using OID need to extract the .zip file and load the all .csv files into target database. source data is .csv files and target data is oracle10g. Dose it will possible by using ODI?? please suggest me...
    Thanks in Advance
    Zakeer

    Hi,
    i'm interrested on this way of reading multiple files, i tried to follow those steps but i'm getting an error while running the package:
    ODI-1226: Step vReadFile fails after 1 attempt(s).
    ODI-1236: Error while refreshing variable VOUCHER_CUSTOMER_DATA_INTEGRATION.vReadFile.
    Caused By: java.lang.NumberFormatException: For input string: "#Activity_report_name"
    the variable vReadFile can't recognize the other variable Activity_report_name.
    the refreshing query for vReadFile is :
    select     file     C1_FILE
    from      TABLE
    /*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=files_namesSNP$CRLOAD_FILE=C:\/files_name.txtSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=#Activity_report_nameSNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=fileSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRACTION_ON_ERROR=0SNP$CR$$SNPS_END_KEY*/
    any suggestion plz
    regards

  • I have an Ipad 4 and its been working fine up until the last week, and now it is very unreliable connecting to the internet and loading pages. It connects to the Wifi network without any problems, all my other devices have no problems at all. Any help?

    I have reset netwrok settings, ip addresses are all fine, restarted my router, but I may be missing something. Anyone else having similar problems?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My MacBook Pro will turn on but goes to the logo and loads.. But after loading it won't turn on

    I clicked to turn my MacBook on.. It goes to the apple logo and loads like it's going to turn on afterwards. But then, the logo just sits there for hours. What exactly is wrong and how can I fix this???

    It's hard to offer troubleshooting suggestions other than the basics when the OS system is unknown.  Each OS has it's own troubleshooting and/or diagnostics.
    Check out the following KB Article:  http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers
    ==============
    It would help us to know which comp model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    This will help in providing you with the proper and/or correct solutions.

Maybe you are looking for