Accessing internet from Ipad

I am having problems with my Ipad not connecting to the internet
tried disconnecting from Wifi and turning on and then back off but nothing works
it does sometimes decide to work but when it does its really slow
we have 3 iphones in house that all connect to Wifi and work fine just not the Ipad
any ideas?

This is very interesting, I did not even realize that this was possible.
If you can share how you managed to get this to work as far as you have, that would be great.
My limited understanding was that BackToMyMac is Sort of an Apple hosted Registry Service where all devices for a specific member account register themselves and then can communicate with each other by Looking up this registry for the route back to the device.
I just tried Good Reader AFP Server Connect  option and it does seems to work on the LAN/WiFi Network. It does take a while to populate the folder tree, even locally. Will try to connect from the  Barnes & Noble At&T WiFi Access Point tomorrow.
Could improper port 548 forwarding be causing the problem? Have you tried port 427 ( the other port that afp uses).
Could trying to connect from Terminal Command line give a more verbose error ?

Similar Messages

  • On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me) Thank)

    On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me. Thank)))

    The following link has a Wi-Fi troubleshooting section for personal hotspot that may help: iOS: Troubleshooting Personal Hotspot

  • HT204074 Cannot access iTunes from iPad any longer? Not sure what happened?

    Cannot access iTunes from iPad...not sure what happen. Used to work fine

    You are right- they got to let us know that status or something. Here I am already to sit down and relax with a nice episode of Dexter and cannot access anything. it was fine this morning and now its annoying.

  • HT204023 hi everybody,i have a ipad 2 wifi 3G , and i want to share my internet from ipad to an other ipad or pc , when i check setting menu,i cannt see ,"personal hotspot" ,please help me ,for active this option on my ipad

    hi everybody,i have a ipad 2 wifi 3G , and i want to share my internet from ipad to an other ipad or pc , when i check setting menu,i cannt see ,"personal hotspot" ,please help me ,for active this option on my ipad

    how can i ,install this function on my ipad ?please help me
    is there any way for solution my problem?i mean that how can i personal hotspot or an onther application for this purpose
    i will have a internet sharing by ipad for my labtop

  • HT4623 unable to access itunes from ipad

    I am unable to access itunes from remote devices which include my ipad and iphone. When I try to purchase apps etc, I am advised "Cannot connect to itunes Store" 

    Hello marie-louise,
    I recommend taking a look at this section of the article Can't connect to the iTunes Store found here http://support.apple.com/kb/ts1368.
    Troubleshooting on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
    Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to 3G, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts. 
    Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet. 
    Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
    Try resetting (turning off and then on again) your Wi-Fi router
    If the issue persists, see troubleshooting Wi-Fi networks and connections.
    Note: All iPhone, and iPod touch models support 802.11b/g Wi-Fi networks. In addition, iPhone 4, and iPod touch (4th generation) support 802.11n Wi-Fi networks (2.4 GHz only).
    And if that does not resolve the issue take a look at this article:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    All the very best,
    Sterling

  • Access icloud from ipad

    how do you access icloud from an ipad?

    Go to Settings>iCloud, sign in with your Apple ID, then turn on the data you want to sync with iCloud.  See http://www.apple.com/icloud/setup/ios.html.

  • How can i share my network from timecapsule to other devices. The thing is i can use access internet from my macbook only.

    I have recently got a Time Capsule with my Macbook pro retina 15". I am trying to setup my time capsule as a wifi station at my home. But the thing is I can only access wifi from my lap only.
    How can I share my network from timecapsule to other devices, and im using OS X 10.8.2
    Please help me!
    Thanks in advance!
    (sorry for the bad english)

    How is the TC currently connected into the network?
    It should work fine in bridge and create a wireless network.. it should already be able to share the network without being the main router.
    Setting up wireless from wireless is difficult.
    I would recommend you buy the USB to ethernet cable Apple sell as an accessory for Air and MBPr so you can actually use ethernet when required.

  • Can i access internet from my PC to my blackberry using bluetooth?

    Hi,
    Since 8100 doesn't have wifi can we access internet using my PC bluetooth?
    Thanks

    Nope, sorry.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to access Internet from LAN - Cisco ASA 9.1(2)

    Hi,
      I have Cisco 5515 IOS 9.1(2). I had configured out-to-in rule with 'ssh' and able to access the Internet server, but the same server is unable to access the Internet. Not sure what i am missing here. Please look in to the configuration below and suggest.
    10.4.20.2 is the host i am trying to access the Internet and it fails, but able to 'ssh' to this IP from the internet.
    ASA Version 9.1(2)
    interface GigabitEthernet0/0
     description OUTSIDE
     nameif outside
     security-level 0
     ip address 1.1.1.1 255.255.255.248
    interface GigabitEthernet0/1
     description BACKUP
     nameif backup
     security-level 0
     ip address 2.2.2.2 255.255.255.248
    interface GigabitEthernet0/4
     description INSIDE
     nameif inside
     security-level 100
     ip address 10.4.20.1 255.255.255.0
    boot system disk0:/asa912-smp-k8.bin
    ftp mode passive
    clock timezone PT -8
    clock summer-time PT recurring
    dns domain-lookup outside
    object network 2.2.2.4_10.4.20.2
     host 10.4.20.2
    access-list out2in extended permit icmp any any inactive
    access-list in2out extended permit ip 10.4.20.0 255.255.255.0 any
    access-list out2in_bkp extended permit icmp any any inactive
    access-list out2in_bkp extended permit tcp any object 2.2.2.4_10.4.20.2 eq ssh
    pager lines 24
    logging enable
    logging timestamp
    logging standby
    logging monitor debugging
    logging trap debugging
    logging history debugging
    logging asdm debugging
    mtu outside 1500
    mtu backup 1500
    mtu inside 1500
    mtu management 1500
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-713.bin
    asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    object network 2.2.2.4_10.4.20.2
     nat (inside,backup) static 2.2.2.4 net-to-net dns
    access-group out2in in interface outside
    access-group out2in_bkp in interface backup
    access-group in2out in interface inside
    route outside 0.0.0.0 0.0.0.0 1.1.1.2 10 track 100
    route backup 0.0.0.0 0.0.0.0 2.2.2.3 20 track 101
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    aaa authentication http console LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 management
    http 0.0.0.0 0.0.0.0 outside
    http 0.0.0.0 0.0.0.0 backup
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    sla monitor 100
     type echo protocol ipIcmpEcho 8.8.8.8 interface outside
    sla monitor schedule 100 life forever start-time now
    sla monitor 101
     type echo protocol ipIcmpEcho 8.8.4.4 interface backup
    sla monitor schedule 101 life forever start-time now
    service resetoutside
    crypto ipsec security-association pmtu-aging infinite
    crypto ca trustpool policy
    track 100 rtr 100 reachability
    track 101 rtr 101 reachability
    telnet timeout 5
    ssh 0.0.0.0 0.0.0.0 outside
    ssh 0.0.0.0 0.0.0.0 backup
    ssh timeout 60
    ssh version 2
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    dhcpd address 192.168.1.2-192.168.1.254 management
    dhcpd enable management
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ntp server 123.108.225.6 source outside
    ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
    username xyz password ***** encrypted privilege 15
    class-map inspection_default
     match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
     parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
     class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:9b63e3cfc9f98800d2bb3efa34c75906
    : end

    Hi Anand
    Could you please do a packet tracer on the Asa?
    Packet-tracer input inside icmp 10.20.4.2 8 0 4.2.2.2 detailed
    Are you able to ping 4.2.2.2 from the server ?
    Please use the following command
    "fixup protocol icmp"
    And then check whether you are able to ping the Internet.
    Regards
    Aditya

  • Error Accessing internet from the flex application.

    Hi
    I am getting the following error while runningm my flex
    application deployed on the OC4J server. The error did not come
    when I was running the application directly from the flex builder.
    However , after deploying it on the application server my
    flex application cannot access the internet and in turn
    throws this error. Does this have anything to do with the
    'crossdomain.xml' file, which most probably does not exist on my
    server. If that is the case, please can somone let me know as to
    where exactly do I put the 'crossdomain' file.
    [RPC Fault faultString="Security error accessing url"
    faultCode="Channel.Security.Error" faultDetail="Destination:
    DefaultHTTP"]
    at mx.rpc::AbstractInvoker/
    http://www.adobe.com/2006/flex/mx/internal::faultHandler()
    at mx.rpc::Responder/fault()
    at mx.rpc::AsyncRequest/fault()
    at ::DirectHTTPMessageResponder/securityErrorHandler()
    at
    flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/flash.net:URLLoader::redirectEvent()
    TIA
    ~Shishir

    This file goes in the"root of the web server". Now tis is not
    very helpful so here are some examples:
    IIS default:
    C:\Inetpub\wwwroot
    Flex 1.5 "integrated Jrun" default installation
    C:\Program Files\Macromedia\Flex\jrun4\servers\default
    Tomcat:
    C:\Program Files\Apache Software Foundation\Tomcat
    5.0\webapps
    If in doubt, put one everywhere until it works, then take
    them out until it breaks.
    Use the universal permission until you get it working:
    <allow-access-from domain="*" to-ports="*" secure="true"
    />
    Tracy

  • Accessing MobileMe from iPad Browser

    I'm sure there's a simple solution to this, but how does one go about accessing the MobileMe website from the iPad safari browser? Every time I try to access my account it brings me to the "welcome to the iPad" page where it wants me to set up my accounts etc. There is NO WAY I can see to bypass this to access my iDisk account....
    While I'm here, let me just do the requisite complaining about the lack of integration between the iPad and MobileMe. This is Apple, right? How about at least updating the iDisk and gallery apps to iPad format?

    Tom Gewecke wrote:
    my friend wants check his MobileMe Email on my iPad, he cannot do that.
    Is there another way??
    Try using a different browser like iCab.
    Tried iCab. I can log in to MobileMe, but the buttons for selecting galleries do not work. Same for all of the other functions except selecting the MobileMe area (Mail, Gallery, etc.) and logout. Not a bad browser, but it does not work with me.com - at least for me.
    My iPad has a big enough screen to manage galleries and photos. It would be nice to ba able to do that. GoodReader works great for documents.

  • Best way to upload RAW photos to internet from iPad

    If I am on a trip and 64GB isnt enough storage for my RAW photos (and I am without my MacBook Pro), what is the best way to upload my pics in full RAW format to an internet location. Apps? Best site to store them on in full RAW? Thanks for the help!

    I just posted the same question. I also have a 64gb ipad, however, with movies and tv shows, games, apps for the trip, that only leaves 8-9 gbs. I could as you have suggested buy more SD cards for my camera..but was also hoping just to batch load 200-300 photos a day up to internet storage (which I am willing to pay for) and then dump them down when I get home. iDisk will do them 1 at a time, but that's not much of a solution. I have wifi where I am staying, so that isn't an issue. I wouldn't want to use a 3g data plan as the roaming would cost more than the trip. This would just let me bring just my camera & ipad (with camera kit). I was hoping to avoid a laptop too.
    Can it just not be done yet? Do I need to lug around my 13" macbook pro as well? My main question is not where can I get internet storage, but how do I get large amounts of photos off the ipad to that storage? idisk, dropbox, etc. Don't seem capable of transfering large amounts of pictures FROM the ipad.
    Thanks!
    Message was edited by: Mark Shykula

  • Need to access INTERNET from guest computer

    From time to time my grandchildren are at my home and need to get on line with their laptops , One has VERIZON Internet at home the other COMCAST. I have FIOS, Is it porrible for them to get on line from my home?

    Simply give them the wireless SSID and passcode (on a sticker on the bottom of your router) and they can connect to your network when they visit.

  • Connected to home network, but cannot access internet on ipad

    I have got strong signal on home network but cannot access the internet. Tried resets, etc

    It could be a simple problem that needs a reset for the related devices. Other than that, try to control the security settings and passwords of your home network. You might be using WEP password protocol to connect your home network. Try to use WPA protocol instead of WEP. Maybe it will help to solve your problem.

  • How to access website from ipad showing access denied website

    HHow to access to website which showing as access denied

    If you are getting an "access denied" error you likely have the wrong URL or you have entered it incorrectly. There is also the possibility that there is a coding error in links on the website itself that is causing this error.

Maybe you are looking for

  • MIRO: posting to G/L Accounts with purchase order reference

    hello our company want to post an invoice for other expense in MIRO through the tab "G/L Acconunt" and don't through the tab "PO reference". our problem that when we post through "G/L Account" how we allocate the "purchasing document" to the line of

  • Best practice in database

    Dan I would appreciate help with the following query: The best practice in the development and deployment in the use of database is: 1. Creating a resource external SQL database. If positive, indicates that when the DataSource is created in the WebLo

  • Deploy Hibernate (v 3.6) on Weblogic 11gR1 (patch set 2)

    Hello, Facing issues in deploying hibernate JPA 2.0 project on Weblogic server 10.3.3 The error message being: Module named 'EJB605EAR' failed to redeploy. See Error Log view for more detail. weblogic.management.DeploymentException: VALIDATION PROBLE

  • Major issues with my iMac- crashes and errors

    In the past 2 weeks I have had multiple issues with my computer. 3 times the OS has crashed- twice I had to pull the plug to get it to do anything. I can't open Photoshop. I can't print. Adobe Bridge keeps crashing. I have to turn Airport off/on abou

  • Please please help! iMovie 09 won't load my project

    Hi, I've been slowly working on a project from a holiday we took early 2009 (yep, I mean slowly). I was actually getting close to having the movie finished and ready for export but now iMovie won't even show the project and this is a long project The