Accessing Notes [AS CS3]

I'm trying to write a script that will add content to the active note in a document. I think I've got everything sussed out except for how to address the *active* note window specifically. This assumes that the user has a particular note showing in the Notes panel and probably does not have his cursor in the note itself.
Any suggestions would be appreciated -- thanks!
Mary

I'm sorry - your comments aren't addressing my question. I'm trying to get to the Notes that were on the iPhone and sync'd up with my iMac. That's all.
I'm sorry, but yes I did provide information that addresses your question, which I provided at the beginning of my first post in this thread.
+*Apple does not provide a utility to access notes from your iPhone's backup, but there are 3rd party utilities that do. Here is one.+*
*+http://homepage.mac.com/vaughn/msync/*+
You're welcome again.
You didn't post here to discuss prices? The following was copied from your original post, so you certainly fooled me.
*Much as I loved my iPhone, it's way to expensive at this point in the recession to replace it at the prices AT&T gives to existing customers, so I think I'm going to downgrade to cheaper.*
Lecture? Good grief. If you don't want to discuss information regarding the price of phones, then don't include anything about price with your post.
Phones aren't "subsidized" - they're just discounted heavily for new users, which is a slap in the face to existing customers. If you're a customer, you get charged top dollar. Counterintuitive to long-term retention, but whatever.
FAIL. Phones are "subsidized", which is the term used by cellular providers for the discount they provide for a new phone purchase. Subsidy = Discount with cellular providers. And a subsidy is not provided by cellular providers to new subscribers only. A subsidy is also provided to existing subscribers who qualify for upgrade or subsidized pricing on a new phone - those subscribers who have fulfilled their contract term for a subsidy provided with an existing phone.
I couldn't care less if you purchase another iPhone. You've got issues.

Similar Messages

Iphone 4s in settings can't access Notes or Mail. Also can't access mail from home screen. Can't send email. All else is good.

I need help. I have reset my iphone. I have turned it off then on. Still can't launch my built in mail app from home screen. When I try it goes to blank page then right back to home screen view.
In settings for the iphone 4s I can not access Notes or Mail, Contacts,Calendars. When I tap either of the two they highlight in blue and then go right back to Home Screen view. I seem to be able to access everything else in settings with no trouble.
From home screen I have no trouble I can launch the built in utility Notes with no problem. I also can launch Calendars from Home Screen view. My Contacts are still reachable by tapping Phone from H/S view then clicking on contacts.
I can not launch mail. nor can I send email. Also the built in mail app is not showing it is recieving mail either. All else seems fine.
I can log in to my email from Safari on iphone and from my laptop with no problem.
Anyone have any suggestions? My iphone is out of warranty. Apples only suggestions are To pay for support.
Thanks in advance

Just had a thought....was trying to rememberif anything changed last night. I think I installed a mac OS X Security update. That's about the time the trouble started. Any ideas? Thanks.

Access Not Made (Initialized Field)

Hello Experts,
I have come across a generic problem. I have defined a new field (material Type - MTART) in the field catalog and included the same in the new condition table (Country / Destination country / Material type / Cust tax cla / Material tax cla ). The condition table is included in the already defined access sequence. This access seuqnce is assigned to the tax conditn type ZWST.
A condition record maintained for the conditon type ZWST for newly defined access. When I create a sales order, the ZWST condition type is not picking up the record maintained for this access. Error message - 102 Access not made (Initialized field)
Subsequently, thecondition value from the next access is picked up.
Question - Did I miss any step during creation of a new field in the field catalog?
Thanks in advance for your kind help. Be assured to get the full points if answered satisfactorily.

Hi
Error message - 102 Access not made (Initialized field)
If you are getting this msg in a sales order in the analysis why a particular condition type value has not been picked
Then this will not be a Error message and also not warning message
There will be a yellow exclamatory mark
Access not made (Initialized field) conceptually means
Suppose if you maintain a condition record say a condition type ZR00 for a sales org 1000 and DC 10 for a material X the price is Rs1000
Now in sales order the value for ZR00 is not coming and the message is Access not made (Initialized field)
This means that in the sales order either sales org is not 1000 or DC is not 10
Simply it means that condition record is maintained for sales org 1000 and DC 10 but your sales order is not created for those data
hence the access is not executed because the initialized fields sales org 1000 and DC 10 is missing
Hope you are getting my point
If it is understood then you can analyze your sales order and solve your error
Reply whether this input has been useful to you
Regards
Raja

Error : Access not possible using "null" objects reference

Hello.
i am working with a zbapi.
i called a external email program in this bapi,everything is working fine over here.
In webdynpro java they mapped my bapi and starting working from there.
every functionality is working fine but regarding this email stuff it is showing an error as access not possible using null objects reference.
where could be the possible error.
is it in webdynpro or in abap side.

Raghu,
You are right. When it comes from the WD Java, may be you are not passing any value at all. You can trace it by these ways.
1. Check it using SE37, make sure everyhting is fine.
2. Print all the values that you are passing to the RFC in the execute RFC method().
3. using ST05 transaction in R/3, enable RFC and SQL trace, check what is passing in between web dynpro and R/3.
Moreover paste your error message here.
Thanks,
Raj.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Welcome to Apple Communities
Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application

Error 102 Access not made (initialized field) during pricing analysis in item level of Sales Order

Hi SAP Experts,
Good day!
I am facing an issue in Pricing Analysis of a Sales Order Item level which is Error 102 Access not made (initialized field).
Details for ZICT condition Type:
Access Details:
*ZINTER is originally used in billing and was decided to also use for order.
There is no problem involved in billing.
Please take note that I already found other discussions and an OSS Note regarding this issue and applied the suggested solution. But still I encounter an issue in the order created.
After implementation of the proposed solution which is moving Material type(MARA-MTART) and Valuation Class(MBEW-BKLAS) to the corresponding fields TKOMP-MTART and TKOMP-ZZBKLAS.
ZICT Condition Type details:
Access details:
As I mentioned above, I already followed steps in previous discussion. It seems odd that there is still a problem. Can you please enlightnen me up and advice if there are things that I still need to know.
I am hoping for your response and help with this matter.
*NOTE: The development Box that I am using is an ECC6 Upgrade development system

Hi Please find the attached screenshot. Hopefully this will be of help.

Java.sql.SQLException: Cannot obtain connection after 3600 seconds. , Exception = Access not allowed

Using Weblogic Platform 7.0 (installed from platform700_win32.exe),
Running a BPM Doamin(WLIDomain with BPM only).
When I try to access my entity bean(CMP), the following exception is getting thrown.
I have seen a similar post in here, but the answer to that post, which says to
provide ACL. does not apply quite well my scenario.
To do this, I right clicked on the connection pool and selected define Ploicy..
It shows two options
RealmAdapterAuthorizer and DefaultAuthorizer; On DefaultAuthroizer i specified
role accessing the resource would be "everyone". - restarted the server - but
still the same error.
Please suggest a solution if any. Do i have to get some service pack for this?
TIA
Ranjith.

We have never seen a case yet where this was not a permissions problem.
Do you have a fileRealm.properties file as part of your configuration?
"Ranjith" <[email protected]> wrote in message
news:3f0fdeb3$[email protected]..
>
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
atweblogic.jdbc.jts.Connection.wrapAndThrowSQLException(Connection.java:701)
atweblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:623)
atweblogic.jdbc.jts.Connection.prepareStatement(Connection.java:133)
atweblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.ja
va:139)
atweblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:81
atservice.samplemgt.v1_0.ejb.entity.BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDB
MS.ej
bFindAll(BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDBMS.java:873)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.collectionFinder(RDBMSPersi
stenceManager
java:300)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:715)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:688)
atweblogic.ejb20.internal.EntityEJBLocalHome.finder(EntityEJBLocalHome.java:47
6)
at ...

Weblogic 7.0, Oracle9i - "Access not allowed" error

All:
I am looking for any suggestions/help/advice/etc on my problem. The background is this, I have an application that uses 3 MDBs, 3 Entity Beans, is deployed on Weblogic7.0 (the latest), and needs to query an Oracle9i database.
I have set up my drivers and URL, they work fine under a normal java class making a connection. They also return "success" when using dbping to test the connection, so the set up is right.
When Weblogic starts, the connection pool is made, the DataSource is fine -- but when the EJB is deployed it comes back with the SQLException "Access not allowed".
I've put the classes12.zip file at the beginning of the classpath, modified the setenv.cmd file so the PATH includes %ORACLE_HOME%\bin and %WL_HOME%\bin\oci920_8.
I've also put in the following in the weblogic-ejb-jar file:
<security-permission>
<description>Oracle</description>
<security-permission-spec>
grant {
permission java.lang.RuntimePermission "loadLibrary.ocijdbc9";
</security-permission-spec>
</security-permission>
I've even tried to do what the Security Manager portion of the Weblogic documentation says to do. It said to "activate the security manager" by putting the following line in the startWeblogic file:
-Djava.security.manager
None of these have worked -- I keep getting that error. Like I said previously I have tried the connections and they have worked through other methods.
I've tried everything, including using an XA driver -- to no avail. My forehead is getting really sore from banging it on the monitor --- can you help???? :/
Thanks!
The connection pool information follows (from the config.xml file):
<JDBCConnectionPool CapacityIncrement="1"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="1"
LoginDelaySeconds="1" MaxCapacity="36" Name="P3IConnectionPool"
Properties="user=EI_SERVICES;password=EI_SERVICES;dll=ocijdbc9;protocol=thin"
RefreshMinutes="0" Targets="beaserver"
TestConnectionsOnReserve="true" TestTableName="STATE_LKUP" URL="jdbc:oracle:thin:@192.168.23.45:1521:ORASUN"/>

Just in case anyone needs this in the future....
After creating the connection pool in Weblogic 7.0 (using the Weblogic console) right click on the connection pool and select "Define Policy", select "Default Authorizer", then enter "Caller is a member of the group everyone" and apply.
That takes care of the problem... didn't happen in Weblogic 6.1

Err : "Access Not Allowed to oracle.jdbc.driver.OraclePreparedStatement"

Hi,
How to resolve the error "Access Not Allowed to oracle.jdbc.driver.OraclePreparedStatement"
in jdeveloper?
Or
Can you please give me some sample pgms which uses oracle.jdbc.driver.OraclePreparedStatement?
Thanks in advance,
Senthil Kumar M.

This is the error from the trace logs...
application [XMII] Cannot send an HTTP error response [500 Application error occurred during request processing. (details: com.sap.xmii.Illuminator.logging.LHException: com.sap.xmii.Illuminator.logging.LHException: java.lang.NoClassDefFoundError: oracle.jdbc.driver.OraclePreparedStatement)].
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: The stream is closed.
Exception id: [0050569D6ACD006A0000010C000023D300046F4B653C90D7]
I could not find anything on the SDN regarding this message, so I may need to open up an OSS note.
Thanks
Skip Ford

New Condition table / access not getting picked in purchase order.

I have created a new condition table for the tax to be calculated for Site / Material combination. The access sequence is also crated.
When I created the purchase order the condition / tax is not getting picked. When I checked in the analysis, I found that the error was Access not made (initalize field) for the site. The material is being picked up.
Please note that the site is getting picked from KOMK table ( I think it is a header table), while the site is actually there in the line item level in the po.
Request your help at the earliest.
Regards,
Veena.

TCODE OBQ2
Select the tax access sequence. Click on accesses. Tick the right combination required site / article . then click on the fields tab. This will take you to the next screen. There click on the field for which you want to change the selection table and then click on field catalog at the bottom of the screen.
This will take you to the field catalog screen. there select the table and field and then save.
With this procedure you can select the required field into KOMK OR KOMP.
Regards,
Veena.

AS - all page items, access not allowed

I am upgrading an AppleScript from working with InDesign CS5.5 to CS6. When I recompile I get the syntax error:
"Can't set <<constant dpvtdppv>> to <<class aPgi>>.
Access not allowed."
My statement is a simple
"set pList to get all page items" within a tell myDoc section.
In reviewing the AS guide for InDesign CS6, the notes say that Chapter 4, covering all page items, was not changed in CS6. Page 113 of the guide phrases the statement without a "get", so my statement would be
"set pList to all page items". This fails with the same error. As my code gets plenty of use under CS5 and CS5.5, I suspect a dictionary error from Adobe.
Anyone with ideas?

G'day
try :
set pList to every page item
m.

SQL access not possible (LC10 / LiveCahce)

Hi All!
I have installed my SCM system and LiveCache Client on the iSeries. My LiveCache Server is installed on a Windows 64-bit Server. I am following the post steps to Initialize LiveCache:
To initialize the liveCache instance LCA:
a) Choose Back (F3). (in LC10)
The liveCache: Initial Screen re-appears.
b) Enter LCA in the Name of database connection field.
c) Choose liveCache: Monitoring.
In the tree structure select <LC_NAME>(<host name-LC_Name>) Administration and
double-click on Operating.
The liveCache Administration menu appears.
e) From the menu, choose Administration Initialize liveCache
Several dialog boxes appear.
f) Confirm with Yes.
But when the screen comes up after selecting LiveCache Monitoring, up in the left hand corner, there is an '!' that reads: SQL access not possible .
Has anyone encountered this problem?
Thanks!
Diana

Hello Diana,
As I saw in your posts::
B Connect to LCA as SUPERDBA with sapliv01-LCX
Try to connect as SUPERDBA/<pwd>@sapliv01-LCX on connection 1 ...
C Attach to SAP DB : Kernel 7.6.00 Build 029-123-130-265
C Database release is SAP DB 7.6.00.029
C INFO : Database 'LCX' instance is running on 'sapliv01'
C INFO : LVC DEFAULTCODE = ASCII
C *** ERROR => different codepage: application=UNICODE, LVC=ASCII
http://dbslsdb.cpp 4668
B ***LOG BY2=> sql error -4025 performing CON dbds#1 @ 1044 dbds 1044 "
==>
The problem is that you tried to connect as SUPERDBA user, which was created
with Default type < database parameter DEFAULT_CODE=ASCII > & the Application is UNICODE system.
What has to be checked/fixed on your system:
-> Go to TA LC10 -> LCA connection -> Integration && check what user you set for the Standard liveCache user. Why did you set 'SUPERDBA' user ? It has to be SAPR3 or SAP<SID>. Check what
   user you selected during the liveCache installation as LCUSER.
-> Please check in LC10 -> Integration for LDA/LEA connections if you set the DBM user - control
   & liveCache user and passwords correctly. You could also test connections in /ndb59.
-> For SAP liveCache documentation see the SAP note 767598.
     The SAP liveCache documentation in English available for SAP customers at:
    http://help.sap.com/saphelp_nw70/helpdata/en/b6/cbdda6248ff648ae9f39f8e28eb24f/frameset.htm
    -> Database Administration in CCMS: SAP liveCache Technology
    -> liveCache Assistant -> Integration
-> The SUPERDBA user is usually SYSDBA user, see "Brief description of the user types" in the database in the SAP note 25591
-> If you have further problems with liveCache/MAXDB please post them at
MAXDB/liveCache forum: SAP MaxDB
Thank you and best regards, Natalia Khlopina

SQLException: Access not allowed (problem with ACL)

Hi, I'm getting the following error when I start my Weblogic (7.0) server.
java.sql.SQLException: weblogic.common.ResourceException: Access not allowed
I followed these steps to Provide the necessary ACl permisiions:
1. Compatibility Security => ACLs
Create a new ACL:
name : weblogic.jdbc.connectionPool.yourPoolname
permission : admin
group : Administrators
2. Create a new Connection Pool:
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button.
I even checked fileRealm.properties, the user admin123 (the user name with which I start the server), is included in all the connectionpool ACL lists. I restarted the server to pick the new changes but it still gives the same errors.
Please help,
Thanks

You need to create the correct ACL for the DataSource following this procedure in the Administration Console:
1. Compatibility Security => ACLs
Create a new ACL:
name : weblogic.jdbc.connectionPool.yourPoolname
permission : admin
group : Administrators
2. Compatibility => click Refresh button
3. Services => JDBC => Connection Pool
Create a new Connection Pool:
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button.
4. Services => JDBC => Data Sources
You can create a new Data Source using this connection pool successfully
Regards,
Prasanna Yalam

I need to re-install my inDesign 5.5 but don't have my licence no for the previuos version (3). My 5.5 has been registered on my Adobe-account, but not the CS3, what can i do?

I need to re-install my inDesign 5.5 but don't have my licence no for the previuos version (3). My 5.5 has been registered on my Adobe-account, but not the CS3, what can i do?

Why do you need InDesign CS (that is version 3) or InDesign CS3 (that is Version 5) to install InDesign CS5.5 (it is version 7.5)?
If it is an upgrade and asks you to input your serial of an older version, you have to get an find it. No one will help you here. If you can't find it and if you have not registered it, you are out of luck. You will have to spend money for a new version.

BB Pearl 8130 "access not allowed!" when trying to download Blackberry App World

Hi, well I am trying to download blackberry app world onto my blackberry pearl 8130 and whenever I try to download it it goes through the language prompts but then goes to a page with "access not allowed" My device software is v4.5, I am currently in Canada, I have the data plan, I can use the internet browser and my carrier is Telus. All help is appreciated, please and thank you!

Hi and Welcome to the Forums!
"Access Not Allowed"? Is that the precise and exact message? If not, please do provide the precise message.
Please check this page to ensure you meet the minimum requirements (including if it is available in your country):
http://na.blackberry.com/eng/services/appworld/download.jsp
If it is available in your country and you feel you meet the device-level system requirements, then contact your carrier to ensure that you meet the service plan (from them) requirements for access (via their network) to AppWorld. Generic data plans, even unlimited, are usually not sufficient...a specific BB data plan is normally required.
Lastly, do be aware that AppWorld is merely a portal, vending apps developed mainly by others. As such, it is not your exclusive procurement source -- there are others that you can try (e.g., Handango, Handmark, BPlay, GetJAR or Mobihand). I have found that there are very few apps that are exclusive to AppWorld. You can search the on-line catalog and then search out other procurement sources, including quite often the developer website itself.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Accessing Notes [AS CS3]

Similar Messages

Maybe you are looking for