Accessing Outlook via browser?

I access my work MS Outlook e-mail through Safari (on my iMac) when at home by logging in to a website. It works great!
However, one would think that since the i

Dude you were just about to reveal the secreat to your success and you trailed off in mid sentence. Is anyone else worried about this guy?? Did you suffer a heart attack? Was there a home invasion? Did you fall out of your chair? Did you figure out the meaning of life?
The only thing missing was ... after your last word. We are praying for you.

Similar Messages

Problem accessing em via browser

Hi,
Anyone know what the problem? I got the error message from the sysman/log folder. Anyone know where i can find the documentation of the setting up of oem?
Beside starting the dbconsole service, what others services and things need to be started or done before i can use em via browser. (http server, any agents, set up repository)
Currenlty I managed to load the http://<host>:5500/em page. Although the database instance is already started up, the web page still indicate that the db instance is down and need to be started up.
Check the sysman/log folder and found the below error message from the trace files. Anyone know what the problem?
2005-03-28 12:47:44 Thread-5 ERROR command: nmejcn:
received no status header from epository at
http://slasun11:5501/em/upload/ sponse header from repository
Thread-810 ERROR pingManager: nmepm_pingReposURL:
Did not receive a response header from repository

According to http://support.apple.com/kb/PH2618 you should be able to access it via a browser by going to https://www.icloud.com/#mail

Firefox 29.0.1 Cannot view download in progress, nor access downloads via browser

I am running Firefox 29.0.1 in a Windows OS. Up until a few days ago, the grey arrow (green when downloading) worked fine, dropped down a menu that showed recent downloads, and allowed me to access them. Now I find I cannot do this. I would prefer to use the native "download button", but am open to suggestions if this is not possible.

You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Can't access NAS200 via browser

All was working fine until yesterday when I (unsuccessfully) tried to set up a ftp option. Now trying to reach the NAS200 web interface, I get a "The connection was reset. The connection to the server was reset while the page was loading" error message.
I running under Windows 7 Pro with static ip address. All other functions of the NAS200 are working, e.g., drive mapping, etc. I've reset the system, reassigned the static ip address, and everything else I can think of. The setup utility correctly identifies the NAS20 and its assigned ip address. The only think I did to get into this situation is play with the ftp option. How can I undo the damage. Thanks for any help.
Gene

gene7 wrote:
All was working fine until yesterday when I (unsuccessfully) tried to set up a ftp option. Now trying to reach the NAS200 web interface, I get a "The connection was reset. The connection to the server was reset while the page was loading" error message.
I running under Windows 7 Pro with static ip address. All other functions of the NAS200 are working, e.g., drive mapping, etc. I've reset the system, reassigned the static ip address, and everything else I can think of. The setup utility correctly identifies the NAS20 and its assigned ip address. The only think I did to get into this situation is play with the ftp option. How can I undo the damage. Thanks for any help.
Gene
I suggest, you try using another internet browser and another computer. You may also try turning on/off the NAS200.

Portal not accessable via browser as inside sapmmc - http provider is red

Hi Experts,
I am very new to NW admin side and currently my client is facing an issue while accessing portal via browser.
Problem: Some times suddently when users try to access production portal it takes a lot of time to open up and in most cases it doesn' t get opened up at all. To check what' s wrong with the portal i access sapmmc and inside their i find under current status -> ... -> services -> http provider -> total requests in red status with a description as avg request - response time last reported value above threshold limit. It will be the same case under open alerts too.
My server configuration is:
SAP-JEE = 7.0SP14
OS = Windows 2003 (X86) 5.2
Server Version = 1.4.2_17-bo6
Kernel Version = 7.00 patch level 109886.44
Server = 32 bit
RAM = 16.00GB
Processor = Intel(R) Xeon(R) CPU E5450 @3.00GHZ (8CPUs)
Heap Size: 1024 MB
Approximate number of users = 500 - 600
Currently to solve the issue, we give a reboot to server. But with the progress in time the frequency is getting increased drastically (approx once in 2- 3 days).
Any pointers on how to solve this issue will be greatly appreciated.
Thanks In Advance,
Vipin.

Hi all,
Thanks for your valuable inputs!
Now the issue seems to end up by raising an OSS notes with SAP and i have been given responsibility to prepare a doc that needs to be submited to SAP.
I have already got the screenshots from SAPMMC on it' s status and all, but also requires log information specific to the reason behind this behaviour. Can i know where the log information specific to such issues gets logged and all the necessary information that i need to document to raise an OSS.
Inputs with be of great help and will be highly appreciated.
Thanks In Advance,
Vipin.

Can't Acces VM neither via browser nor ssh

I have one instance of gitlab created via vm-depot and it was wornking very fine for some months. Then it suddenly stopped. I can't access it via browser and ssh neither and it has a lot of important projects saved that i don't wanna lose. I checked the
endpoins and they are ok. I also tried to reboot and set it to a smaller size but it did't work... I don't know what to do, please help me.

Hi,
You might want to recreate the VM by deleting the existing VM and retaining the attached disk. You can then attach the same to the new VM.
Recovery Steps can be Scripted or Manual. To perform the same, suggest you to have a look at the below article
http://blogs.msdn.com/b/mast/archive/2014/11/20/recovering-azure-vm-by-attaching-os-disk-to-another-azure-vm.aspx
Hope this helps !
Regards,
Sowmya

Problem accessing mail via Safari browser

How do I access iCloud Mail via my Safari browser on my iPhone? If I go to iCloud.com it just offers me the option to install it on my phone.
The problem is, I already have it installed on my phone and it works fine EXCEPT at my new job - the wifi is not very good and I can access internet/Facebook etc but every time I try and load email it always says it 'cannot find the server .' I therefore tried to access email via safari browser - my other email provider works fine that waybut iCloud doesn't even give me the option to login, just keeps suggesting I install it.
Any ideas how I can check iCloud email at work? Can't do it on work computers, site is blocked....and there is no 3G/4G signal.
Thanks for any advice!

According to http://support.apple.com/kb/PH2618 you should be able to access it via a browser by going to https://www.icloud.com/#mail

Error in trying to access my FORM via browser

Hi, I am new to Oracle Application Development, as a starter I created a sample form in Form builder and compiled it, let say TESTFORM.fmx
I have placed this file in [ C:\DevSuiteHome_1\forms ] as my default location in "default.env" file is this only.
Then I created a tag in "formsweb.cfg" as:
#ETA Report
[TESTFORM]
envfile=default.env
form=TESTFORM.fmx
userid=i-----r/i----r@xii
widith=1500
height=600
imagebase=codbase
archive_jini=frmall_jinit.jar,colorpicker.jar,keyfilter.jar,my_icons.jar
archive=frmall.jar
When I try to access it via my browser [IE6] by going to link: http://pptaw0054.lotte-ppta.com:8889/forms/frmservlet?config=TESTFORM
A grey box of 1500x600 is shown with an error shown in the center: java.lang.ClassNotFoundException: oracle.forms.engine.Main_
Can anyone please help me out with the problem.
Thankyou!

Hi Check these -
1. Check these URL's are working
http://pptaw0054.lotte-ppta.com:8889/forms/frmservlet
http://pptaw0054.lotte-ppta.com:8889/forms/lservlet
2.If Webutil installed? Then do proper configuration for "WebutilArchive"
WebutilArchive=frmwebutil.jar,jacob.jar
3.If Jinitiator is used,check if all corresponding jar files are downloaded onto user machine.Because all required class as shown in the error are there in jinitiator jar files.Also check all jar files that you have mentioned in archive_jinit are downloaded onto user machine.
DO like this if using webutil archive_jini=frmall_jinit.jar,colorpicker.jar,keyfilter.jar,my_icons.jar,frmwebutil.jar,jacob.jar
4.Enable all activex settings of your browser and do a proxy bypass setting in the browser as well..
5. Check if you have download rights for downloading JAR files mentioned in archive_jini
Edited by: anandk on Jul 24, 2012 1:18 PM

My access was blocked because i left my pc on at home and now i cannot access anymore with thunderbird only via browser how can i restore access??

I cannot access anymore via thunderbird while with the same pw i can access via browser after my account was blocked how can i restore access via email program?

I was on my gmail account and looked at settings forward and pop/imap
be sure they are activated.
Imap if you want to access it from several places. That way you have the original on Gmail-server and copies on your pc.
Pop on the other hand loads down the emails. perfect if its just one pc.
(i'm not sure the Gmail-server deletes them thou).

Can no longer access Facebook via Safari on iPhone

Ever since I loaded IOS 6 onto my iPhone 4, I cannot get to Facebook via Safari...it automatically reverts to the fb app. Even if I put www.facebook.com into the browser. I still access fb via Safari on my ipad (new ipad). This is important as I have low vision and the font is too small on the app.

I have the problem after upgrading my iPad to iOS 6.
It started with the app store, then facebook app and finally can't access to any apple.com page.
Already restore the iPad and now I can access to app store. Still working to get back my access to facebook.
If anyone has an idea about this?

I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

Welcome to the Apple Community.
Only content in your iTunes library can currently be sent via AirPlay from your mac.

Sync with Outlook via RDP?

We have been using a number of TS servers for our users to access Outlook and MS Office apps for years now. However, recently, we have purchased and deployed about 50 Blackberries. We use BIS to set up their pop3 Outlook accounts.
I'm trying to figure out a way for those users to add/sync their phones with Outlook to get their contacts/calendar. Is this even possible? They RDP in to the servers to access their Outlook accounts. I found a thread in techarena about using BES express free version, but it was unclear whether it was free for just one user or up to 30 users.   Any ideas are appreciated! Mostly the phones are Pearl flips and some and some Curve 8330s.

Hi and Welcome to the Forums!
With only BIS, one is natively restricted to email-only OTA. That is the way it is designed. There are all kinds of threads in these forums looking for ways to mimic ActiveSync capabilities via BIS, but I've yet to see anything that truly succeeds. BES is the RIM solution for achieving OTA sync of stuff beyond email.
BESX is the new capability for Exchange users to have nearly all the capabilities of BES, and for free (with limitations, of course...one gets what one pays for!). Here is the announcement article from these forums:
http://supportforums.blackberry.com/t5/Announcements/Announcing-BlackBerry-Enterprise-Server-Express...
It has links to all kinds of other data, plus the BPS/BESX forum on this site is full of other chatter:
http://supportforums.blackberry.com/t5/BlackBerry-Professional-Software/bd-p/bps_unite
One caveat, however...do not expect to fully mimic ActiveSync under any circumstances. With BES/BESX, you will have OTA calendar and contacts fully synchronized. But, email will remain limited to new emails starting at the point of activation...none of the RIM solutions are designed to fully mirror the entire mailbox on the HH. There are tricks in BES to get some history, but I'm not sure if those even translate into BESX...plus they are limited as well and do not provide 100% (unless, of course, the users mailbox items are within the limitations for history).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Ix2-200 VERY slow accessing files via osx 10.10

ix2-200 running fine. Drives are good. Using latest firmware 2.1.46.30093.
Can manage via browser just fine.
Connect to server using smb ipaddr and it mounts up just fine.
I can open the directory (using osx 10.10.1) with finder just fine, but when I try to access the files within the directory, nothing shows up (I know the files are there) and can hear/see drive activity (blue light flashes). If I wait an hour or so, I can start seeing files. Since this is a laptop, it's not possible to always leave it connected and waiting at least an hour after connecting to it is not acceptable.
How can this issue be resolved?
Thanks
Bill

Hello morber
Try connecting to the ix2-200 via AFP instead of SMB/windows file sharing on your Mac.
Finder> Go> Connect to Server, there enter the ip address of the unit and proceed. It should ask which share folders to access and if secured, enter the NAS user account credentials.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Accessing NetStorage via WebDAV from Windows 7

Until last week we were running Netware 6.5 SP8. I was aware that accessing NetStorage via WebDAV (using Microsoft Web Folders) does not work on Windows 7. Now I migrated the server to OES 11 SP2 and I decided to re-investigate the issue. Currently, I still can't access NetStorage from WebDAV on Windows 7. When I try to add new network location in Windows, enter the correct URL and I'm prompted for username and password. After entering the correct password, the username/password window re-appears. On entering the username and password second time, I get error message "The folder you entered does not appear to be valid. Please choose another."
Is the situation still such that accessing NetStorage via Microsoft Web Folders on Windows 7 does not work, or do I have something misconfigured?
From web browser, there are no problems accessing NetStorage.

Originally Posted by vatson
Until last week we were running Netware 6.5 SP8. I was aware that accessing NetStorage via WebDAV (using Microsoft Web Folders) does not work on Windows 7. Now I migrated the server to OES 11 SP2 and I decided to re-investigate the issue. Currently, I still can't access NetStorage from WebDAV on Windows 7. When I try to add new network location in Windows, enter the correct URL and I'm prompted for username and password. After entering the correct password, the username/password window re-appears. On entering the username and password second time, I get error message "The folder you entered does not appear to be valid. Please choose another."
Is the situation still such that accessing NetStorage via Microsoft Web Folders on Windows 7 does not work, or do I have something misconfigured?
From web browser, there are no problems accessing NetStorage.
My limited understanding is that MS seriously mangled/changed WebDav in Windows 7 and if you google for webdav webfolders and windows 7 you'll find all sorts of differing things that may be needed for things to work.
I do know that you can download the free NetDrive client software somewhere and that should work on Win7 against NetStorage.
I vaguely recall there was something special you had to do with Web Folders on Windows 7 if you wanted to use WEBDAV against FILR, so perhaps those same steps are necessary against NetStorage.
Also, are you accessing NetStorage directly, or going through a reverse proxy such as NAM?

Accessing discoverer via url.

Accessing Discoverer via URL.
Hi,
I'm having a problem with the following....
I am trying to setup a scheduler for generating discoverer reports, without using the discoverer scheduler. I want to be able to easily print them off in a particular location.
This is fine for normal reports with simple url's but complicated url's are causing me a problem. I have created a java program which will build the url string from some set parameters using the URL class.
Parameters include Responsibility, user name, password, workbook and the workbooks parameters.
The problem is that discoverer will not allow the request asking the user to reenter his password. Even when a site check indicates that the url is exactly correct.
I have even taken the generated url and cut and pasted it into the browser without success. I don't think it is a java issue but maybe how the system is setup.
Any help would be useful!

Hi
You cannot embed the password on the java command line. This was determined to be a security breach because the password would have been in plain view. In order to make a URL work you need to be working with the full application server and be using either private or public connections, ideally with SSO enabled.
All you do is run the report as usual from within Viewer when connected as the user you want to be connected as. You can then copy the URL from the address bar at the top of your browser and paste this into a new browser. If a public connection is being used without SSO the report will execute. If SSO is enabled then SSO authentication is required. If a private connection is being used without SSO then the password will be prompted, whereas if a private connection is being used and you are using SSO then the password will be remembered by SSO and supplied for the user.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Accessing Outlook via browser?

Similar Messages

Maybe you are looking for