Accessing PC on Home Network

I just got my 1st Mac, and when I boot it up, it lists my 2 WIN PC's that are on the network. When I double click on it, it says connection failed. I'm not sure how to access it, as I need to transfer files. All the computers belong to me, so I have complete access to them, just don't know how to access the files.
Any suggestions would be greatly appreciated!
Chaz

Well...
On airport utility you can see the name of the windows network of your TC, default is WORKGROUP, (yes caps look) you need to have the pc on the same network name.
On PC you can change the name on properties of my computer > Computer Name > Change > Member of...
Be happy

Similar Messages

New Ipod Touch 5g can't access Internet in home network (using Linksys E4200 router). But, OK with other Wifi.

Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

ITunes cannot access files from home network

Just got new Vista PC. All my music files are on older XP PC. I have set up my home network, and Vista PC can see/access all my XP folders. I have Sonos and Yahoo Jukebox installed on Vista PC and both programs can access the XP music files and play them.
On iTunes however, I cannot create my Music folder with the XP music. When I select 'Add Folder to Library' and get the 'Browse for Folder' popup, I see the 'Network' icon, but when I select it, nothing happens. I can right-click 'Explore' from there to re-launch/see the full network, but iTunes cannot seem to see/access this.
Same problem if I go through iTunes' Preferences/Advanced/General to set the iTunes folder location. I can hit browse and see 'Network' in list, but selecting it produces nothing.
Very surprised that I have no problem through Sonos or Yahoo Jukebox but Apple brakes down.
Any thoughts?

After the update I cannot connect to my router anymore
(see other threat)

Unable to access website using home network but able to access using school network.

Hi, I'm currently on a MacBook Pro running OS X Mountain Lion and Safari v6.0.4.
As per the title, I'm unable to access particular websites, namely abduzeedo.com and fromupnorth.com, using my home network but when I try to access using my school network, I can access it freely.
The error message I get is: "Safari can't open the page [website] because the server where this page is located isn't responding"
I've tried clearing my cache, resetting my IP, deleting the library file (or whatever it was that some people suggested in forums) but it still doesn't work ):
Any suggestions?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Using Mac mini as an access point for home network

Hi
I'm looking for some help on using my mac mini as an access point on my home network.
I have a G5 tower which is wired in to my router and acts as a home server. It has all my itunes library, films, etc
I stream these to various machines in the house, one of which is a mac mini in our living room.
The mini is connected to the network via powerline adapters meaning the airport is left free.
So i set up internet sharing on the mini via airport so I can use the machine as an access point for the living room.
If I connect another machine to the mini via airport, Internet is working fine but for some reason I can't see the any other machines on the network.
All I see in the sidebar is the mini, not the server.
I've tried it on both mine and my friends macbook but had no luck.
Am I doing this the wrong way?
How would you go about doing this?
Cheers

Internet Sharing may not be providing an address via DHCP, It also may not be providing a subnet Mask that can get you to communicate with the other computers on your local Network.
Take a look at what IP addresses are being used by the various computers on the network. I would expect you have a Router that may be using 192.168.0.1 as its base "private" address, and issuing DHCP Addresses in that range and higher with a subnet mask of 255.255.255.0, meaning anything with the same three high octets can communicate freely without Router intervention.
But what addresses are bing used for the Wireless Shared computer(s)? and what subnet mask?

Macbook not access work or home networks with wep key

I have just purchased a Macbook. It is to be used for work and home purposes. The work network is a given, and can not be changed. It requires a wep key that is 26 charcters long. When I input this via the Network instructions on my Macbook, it is not recognized. I have tried putting the prefix '$' in front, and '0x', and '0X' and placing in '"' (double quotes) and NO LUCK! I can't get into the network. This is no issue with multiple Windows PC's that I have. I can also access via pocket PC, and Cingular 8125 smartphone, but not Macbook.
At home, I can not access my network, a 2wire router, without disabling the wep key. Not acceptable. I have 2 Windows PC's that work fine on this network, with a 13 character wep key. Have tried the $ and all the other hints and no luck.
Suggestions please! I purchased this Macbook to be able to show that it could be a more reliable and productive machine, working in the office environment. So far, can't get into the office environment!
Thanks
Macbook Mac OS X (10.4.6)

Ok, some progress, but not in yet. I was able to "connect", but have no Internet connection. On the "Network Diagnostics", I have a green light for "AirPort", "Airport Settings", "Network Settings", BUT I have a red light for "ISP", "Internet" and "Server". I checked by "Sharing" settings, and have the Firewall On, since I know that the company requires such (tried with it off, and same status). Are there some ports I need to open? What other steps do I need to take to get beyond "connected" and really access the internet??
Thanks,

Need help choosing how to extend my existing home network to my detached garage?

I have done as much research as possible on this scenario but cannot seem to match the ideal solution with my wants. Perhaps I simply just do not understand networking as well as I thought I did. Either way, any helpful information or suggestions are greatly appreciated.
Objective: Extend my wireless network to my detached garage.
My current ISP provider is Time Warner Cable. I have RoadRunner Extreme, which in my area gives consistent speeds of 50 Mbps download and 5 Mbps upload when I am connected via ethernet cable. When I upgraded to the "Extreme" package i found out I was forced to use their Motorola SB6580 ... its a DOCSIS 3.0 cable modem + wireless router. I was able to access the Motorola's setup options on the internet and I disabled the wireless function. This has allowed me to use my Time Capsule as the primary router to provide wireless access on my home network. I have not had any issues with this setup and is my preferred way to operate.
I have recently moved my home office to the 2nd story of my detached garage and need to extend my wireless network to meet the demands of all my gear. I have decided to achieve this goal by going with one of the following 3 options:
1.) enable the wireless function on the motorola modem making it the primary router. move my time capsule out to the office and use it in bridge mode. However I do not think I understand bridge mode correctly. I thought the secondary router (in this case my TC) in bridge mode needed to be connected w/ an ethernet cable at all times to enable this feature? If I understand similar networking discussions I will lose the ethernet ports with this option? If this isnt called Bridge mode once i take away the ethernet cable what is it "technically" called?
2.) buy a 2nd airport extreme base station and create the same type of wireless network extension setup. The difference here is I would leave my motorola's wireless features disabled, use 2 apple products that speak apples to apples wirelessly and relieve myself of all the headaches involved with a neopolitan setup. This seems like the obvious choice b/c Apple products are much more user friendly, but I dont want to spend the $200 on a new router if I can achieve a comparable setup by just enabling the equipment I already have.
3.) use either of these 2 scenarios above & go buy a 150' ethernet cable to join them together. if this is the case wouldnt a $50 hub suffice on the end of the cable? I dont necessarily need to have wireless, just reliable connectivity. I can access the existing wireless network now, but download speeds are not great and things really start to slow down when i have multiple clients connected. I would rather not have to drill through exterior walls, bury conduit and install learn how to install data wall plates, but i will if this is the pros far out way the cons.
Current modem/router placement: if standing @ the front door of my 1 story house facing out towards the street my motorola modem/router is in the front right-hand corner of the house.
Distance location of the detached garage office setup: if standing @ my front door my my work area is in the far back left corner of my property. it is approx 175' from the router and on the 2nd story of the garage. I said 150' cable earlier b/c i could relocate the router to a bedroom on the opposite end of the house, however this would eleminate the current wired status of the items connected to it and I would prefer to keep them wired in.
clients connected in the house: (4) apple tv's; Roku; Xbox; Wii; Playstation 3; (2) Lenovo laptops; iPad; (2) Blackberry's; (2) iPhones; iPod touch; (2) wireless netowrk printers; (2) smart tv's ... a handful of these are currently wired into the time capsule now which provides an uninterupted viwing experience for the MLB package. This of course trumps all opportunity costs involved with moving the router. There is nothing more frustrating than a screen buffering in the botton of the 9th inning after you've sat there for 3 hours.
clients connected in the office: (2) 27" imacs; apple tv; iPad; network printer; Wii; Harmony Link universal remote; Mac Book Pro ...
I have approx 5TB of digital media that is shared over the network via shared iTunes libraries that I would like to access as well. iCloud helps with all of our household gadgets as far as acessibility but with all the backups going on simutaneously it also creates headaches when you need the throughput. I need to do a better job of managing those settings. nonetheless, I would like some guidance on the best way to extend my current netowrk, suggestions for better scenarios i did not mention and thus am probably not aware of and any networking 101 schooling if it doesnt sound like i understand the way bridge mode/network extension works. sorry for the long post and thank you for your time & help.

Ethernet beats all other solutions hands down..
A single ethernet connection from wherever is the closest point in the house to the garage office... wins. You can plug a router working as AP and switch or pure switch on to it. Get a cabler in to do the job.. and they can probably figure it out and do the whole job whilst you scatch your head.. yes you will pay for it.. but a cabler knows how to do it. And most likely leave the inside network exactly as it is. Since office is important to be reliable.. there is one and one only reliable method.. ethernet.
If the garage and house are on one electrical circuit.. which is doubtful if it is a separate building then EOP adapters can often work well.. They do not handle earth leakage protection, breakers (rather than fuses) or meters at all well.. but if they are simply all connected to power.. behind the same meter and using old fashioned fuse box.. EOP rated at 200mbps or some now are 500mbps can work reasonably well. Speed about the same as wireless at its best but if it works when installed will generally not change with the weather, moon, and wind direction which wireless is liable to do.
Wireless bridging.. hmm avoid if possible. For reliable connection no.. apple products can do wireless repeater but as you mentioned that turns off the ethernet ports except for the Express.. that is the only unit you can use as a bridge and plug a switch into it. Why Apple why??
So if you want to bridge two points by wireless buy specialised wireless bridge.. that means an AP in the house plugged into the existing network.. and AP unit perhaps on the outside of the garage.. or in windows if you have a window in the house that looks at a window in your office. Look at products from companies like ubiquiti.. they are not too expensive but professional equipment and designed for precisely this kind of work.
Hence the reliability is dramatically better than domestic stuff.. and will require a lot less work to maintain the link.
Conclusion.. wire it.
Unless you rent the house.. an investment in ethernet cabling install once properly and forget .. beats every other solution even if it costs x5 as other solutions.

Problem with "Home Network" in hub manager

Hi everyone,
I had a bit of an issue with my homehub this week where some prolonged decorating caused the hub to be unplugged for most of the day. When the hub was plugged in again it appeared to have performed a factory reset. Now over the past day or two it has had the odd issue that I've needed to sort. My main issue is that currently the "Home Network" option with the Home Hub manager will cause the router to reset and drop connection, however it is only this page. Also the router isn't responding to requests to bthomehub.home and I have to use the IP. I've done a factory reset through the hub manager and set up all my previous settings as were previously, but the lack of access to the "Home Network" page is still a problem and is getting to be frustrating because I have a chromecast unable to connect without being able to turn off smart setup.
Details of my home hub below, any input would be lovely.
BT Home Hub 5 (Type A) | Software version 4.7.5.1.83.8.173.1.6

have you tried a factory reset but using the recessed button on back and holding for 20/30 secs until the lights flash?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

My ipod 5 won't connect to my home network

I have an updated iPod 5th generation and for the last three days I've had limited internet access at my home network. It works everywhere else but not at home. It says it's connected but nothing that requires internet will load. I'm the only in the house hold with this problem. Yes, it could connect before. Yes, I've reset my network settings, and forgot the network and reconnected. I don't know what else to do.

Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Connecting to existing home network via Airport Express

I had my Macbook Pro connected to our home router which allowed me access to our home network and the internet. On this network we had connected both my MBP and my flatmates PC (which is connected directly to the router via network cable).
Through this configuration i was able to both access the internet AND access files on the PC. I have recently purchased and airport express to eliminate the need for the network cord. Since setting up the AE i have been able to connect to the internet no problem by creating a wireless network and using all the automatic settings, however in the process i have lost my ability to connect to the home network and my flatmates computer. In fact, under "networks" in finder the home network has disappeared. Also in network prefences i am getting a warning saying "The cable for Ethernet is not plugged in".
Is anyone able to tell me what im doing wrong?
thanks ....
Message was edited by: seysearles

The problem is that the AirPort Express (AX) is creating a subnet.
To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address).

How can I Access TC outside of my home network?

Hi everyone:
I am new to the MAC World. We just bought my daughter a Mac Book Pro to use in University then added the time capsule at home so she would be able to back up her work over the internet and we would be able to use the WIFI and TC here at home. We get to the University, set everythin up and Airport goes into a loop searching for the TC; it appears it cant see the TC. We are using the wired internet through the school then go to a wireless router in my daughters dorm to allow her to access the internet both with her phone and computer.
Is there a simple fix for this? I also have three other PC's other laptops and several cell phones accessing the home network at any given time but only need access outside my home to the TC for the MAC Book Pro. The sales rep at Future Shop said it would be easy to hook up and access.
Any help would be appreciated.
Thanks,
Martin

Ok.. you have to work out the way you are going to access the TC..
There are basically three methods..
1. Direct access using AFP.. you need a static public IP and the TC as the main internet router.. then you need to turn on internet access and password the hard disk. The college has to have port 548 open.
If you do not have a static public IP then you can use ddns service but there is no client in the TC.. so you will have to figure out a way to update the service.
2. Use BTMM with icloud. This is the Apple method. It actually uses vpn..(the vpn is locked to apple use only but it is not available to end user).. The requirements are 7.6.1 firmware and lion or ML on a Mac computer. I am not sure of the ports because the link to the Apple cloud is separate from the vpn to your home system.
3. VPN.. that means you need to bridge the TC and use a decent quality vpn modem / router or combo thereof.
VPN are not for the faint of heart.. it can take a lot of work to get running but offers the best security.. you will need to change the network equipment in your house more than likely.. using a pc / mac as a vpn server is possible.. but messy.
There are also easy ways to at least access the home computer.. teamviewer for example. This is likely blocked by the college though.
Double NAT is where you put a router on a private IP behind another router on a private IP.. that makes port forwarding close to impossible.

I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time...
Thanks for any help.

I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
Are you talking about files you are hosting on the TC?? Not Time Machine backups??
Can you tell me exactly how you are accessing the TC.. please do a test..
Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
Do the same test from the same computer with wireless turned off running ethernet.
Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
eg
Now do the test from the HP laptop and give me the results from that.
Is the issue wireless only.. ??
Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
About Wireless Diagnostics

How do i get my laptop to access the itunes library on my external drive hooked up to my desktop via my home network?

How do i get my laptop to access the itunes library on my external drive hooked up to my desktop via my home network?

If you are willing to pay $24.99 per year for iTunes Match you can put your library in the cloud provided you don't have more than 25,000 tracks.
iCloud- iTunes Match
iTunes in the Cloud and iTunes Match Availability
iTunes Store- Troubleshooting iTunes Match
iTunes- How to add a computer or iOS device to iTunes Match

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

Posted in error.

Connecting two routers to create a home network and have access to the net "wired"

How do i set up a network between two linksys routers that can access the internet and computers set up on both routers. I noticed I cannot browse our home network computers that are behind the other router. currently i have a net connection going to router 1 and a cable from that router going to the wan port on router two. I cannont access router 1 computers from router 2. thank you for your help!

See here.

Accessing PC on Home Network

Similar Messages

Maybe you are looking for