Accessing portal pagegroup pages without need to SSO login to the portal.
how do I make an entire page group publicly accessible so that all users who try to access the portal page do not need to SSO login to view the page.
I changed for the page as PUBLIC and given view privileges..however the portlets do not show up...can anyone tell an easy way to make a created pagegroup publicly accessible.
It would be good if someone can elaborate on how ppl usually build a pagegroup which is publicly accessible without logging into oracle portal.
Thanks,
Prasanth.
Hey Christian -- I think you left off one piece. He mentioned that the portlets are not showing up. Barring anything like external applications, it could be that the portlets are inheriting from their provider and the provider is not set to be public.
Prasanth: To check/change this, go to Navigator and the Providers tab. Then drill down to the provider where your portlets are. Click Grant Access on the provider level or drill down to the individual portlet depending on how your portlets are setup.
If you grant public access on the provider level, everything under that provider will be publicly accessible unless you set them otherwise. To grant public access to a provider, add the user PUBLIC and give them execute rights. To grant public access to an individual portlet, drill to that portlet and click grant access. Clear the check mark that says Inherit Privileges from Portal DB Provider and grant the user PUBLIC execute access to that portlet.
Rgds/Mark M.
Similar Messages
-
I received an error message after attempting to log in to a website. Access prohibited. You have attempted to access a secure page without the appropriate authorization.
I access this website at least twice a week and now I get this error message. I am able to access this website through Internet Explorer. Is there something I can do to fix this problem, so I can use Firefox?Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852 -
Error: Page Metadata could not be obtained from the Portal database.
Hi,
Maybe some one can help me with this.
After my installation (oas portal 10.1.4) I changed my URL in portal and sso.
modplsql : http://<webserver>:<port>/pls/portal/htp.p?cbuf=test --> its working fine. I got test
Parallel Page Engine (PPE) : http://<webserver>:<port>/portal/page --> its working fine. I got PPE is working.
http://login.hostname:port/oiddas --> It`s working fine
http://login.hostname:port/sso --> It`s working fine
http://hostname:port/portal/page/portal/TOPLEVELSITE --> It's not working I got in firefox Error: Page Metadata could not be obtained from the Portal database. In explorer i got HTTP 500 error.
I checked my application.log and I got this:
**portal: id=45342345678,1 ContentFetcher Unexpected Exception Request Failed:oracle.webdb.dispatcher.DispatcherException: I/O Error dispatching request name=content-fetcher19 label=pageMeta url=http://<webserver>:port/portal/pls/portal/!PORTAL.wwpob_page.show/TOPLEVELSITE time=1ms timeout=60000ms process=Dispatching**
Maybe some one can help me to solve this threat.
Thank you.C@rlitos wrote:Edited by: C@rlitos on Sep 30, 2009 6:14 PM
Hi!!
To register the url in portal I used this doc 434795.1 - 558634.1 from metalink.
http://download-west.oracle.com/docs/cd/B14099_17/core.1012/b13998/variants.htm#CBDBDJHD
I verified and i got this:
LSNR_TOKEN
SITE_TOKEN
SITE_ID
LS_LOGIN_URL
URLCOOKIE_VERSION
ENCRYPTION_KEY
ENCRYPTION_MASK_PRE
ENCRYPTION_MASK_POST
U
oldurl.com:7781
XY776FQWDCY4EFF
8AC54EFF
http://oldurl.com:7780/pls/orasso/orasso.wwsso_app_admin.ls_login
v1.2
2FWERFW768767866
6B4DEERWF87W87897E89WRF897W3FC9
F0FEC6AREW76786WEFWER76F8968695
N
newurl.com
1RG8IYA4F9D2E30A
F9D2E233A
http://newurl.com/pls/orasso/orasso.wwsso_app_admin.ls_login
v1.2
B32852345661513F0
1A5DTR546EYEYEHEHSVSGFB44C
A33RTWERGERGERGREFWERF8
N
I havent create new token values.
Edited by: C@rlitos on Sep 30, 2009 6:14 PMHave you configured your Infra with a new hostname on a different port ?
Unless, you had installed your OAS with custom ports, and have not used the default ports for the components, your lsnr_token for the newurl has a problem. orasso and sso should be configured at 7777, and by default they configure at that port. That means that your newURL should be pointing to http://newurl.com:7777/pls/orasso/orasso.wwsso_app_admin.ls_login for the ls_login_url.
This might have happened due to some error in registering your portal with the SSO. Have you used custom ports for your installations?
Additionally, did you configure your newurl on port 80? -
WHEN I TRY TO ACCESS A WEB PAGE MY I POD TOUCH RETURNS TO THE DESKTOP SCREEN
WHEN I TRY TO ACCESS A WEB PAGE MY I POD TOUCH RETURNS TO THE DESKTOP SCREEN
Try a hard reset of your iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock -
How to Find out who is login into the Portal.
Hi Friends ,
I have one doubt Now I have one Requirement. i.e.
How many members (users) login in to the Portal?
In what time they login into the portal?
How many times hits the iView in Portal?
Who is last login into the portal?
I have find out these details by using these details I will create one Iview.
How to find these details. By using these details I will created one iView. Kindly let me know.
Could you tell me those
1. Is it creating Portal Activity Report iView in Portal?
2. By using WDJ Application we can create one Application. By using this application we can create iView?
Regards
Vijay KalluriHello Vijay,
If you are interested in a 3rd party application with all the stats you need and more, check out Click Stream by Sweetlets. Easy to download and user friendly with many key reports quickly accessible. It also answers some of the questions you had above a whole lot simpler than anything else out there or any other route you had in mind.
In the very near future Click Stream will also have iView recording to monitor iViews, telling which iViews have been clicked, etc. Also, the one you were looking for, "who the last login into the portal", will soon be added.
Click Stream uses the Usermanagement (UME) API to get more information about the user, groups, roles, LDAP attributes etc. and offers you the ability to use such information for filtering within any report.
Click Stream also uses the PCD API to get information about the pages your users are visiting.
Here are some reviews on the SAP EcoHub from people who have used it: http://ecohub.sdn.sap.com/irj/ecohub/solutions/clickstream
Please just let me know if you have any question or if you are open to test drive Click Stream. We will certainly help as best as we can.
Good luck. -
Error while login to the portal
Hi All,
When I try to login to the portal as a user who dont have Super administrator role and have only "Everyone" role are getting the following error.
Error occurred while trying to access desktop: "portal_content/every_user/general/com.sap.portal.defaultDesktop". The object does not exist or you are not authorized to access it. If this problem persists, contact your system administrator.
Log Off
I followed the steps which are given in the other threads as a solution but still facing the problem.
In my main rules we have given condition like If user = * then use the general default desktop and in the default desktop permissions that Everyone role has read permission . Even then the problem is not solving.
Can anybody help plzzzzz........
Thanks in advance.I'm not sure what you mean by "content admin" vs "system admin". Content admin is used mostly to navigate to the portal content studio where you can work with PCD objects and set permissions. You will not see all PCD objects here, so things like rules etc won't be visible.
System admin is a role. It has many functions, including the system landscape editor, where you can work with systems, and the portal dispay area, where you can work with display items, such as rules.
There is also a permission editor where you should be able to set permissions on any object.
So, what do you mean by asking if you should use content admin or syetm admin? -
New users are getting "cntl_error" whenever login into the portal
Dear Experts,
New users are getting "cntl_error" whenever login into the portal. They are accessing .par application. I have read so many threads, but unable to find exact solution.
I have tried in my browser with the user login, then no error. But the user login there end then its giving "cntl_error" error.
Problem with Internet Explore Browser? Any additional setting required for users browser?
Could you please help me, how to resolve this error.
Thanks in Advance.
Regards,
Vijay.Hi Vijay,
Check this thread - "CNTL_ERROR" raised,error key: RFC_ERROR_SYSTEM_FAILURE- Show Team Calendar , this might help you on what you are looking for.
Regards,
Sen -
Sharepoint portal goes down Whenever a specific user logs into the portal
hi All,
Sharepoint portal goes down Whenever a specific user logs into the portal
When a specific user logs into the portal , the iis goes down and no one able to access the portal.
once we reset iis then portal works fine .Please help us to identify the root cause for this issue.What is the error message it throws for everyone after that user user logged into the site. Did you encountered the same behavior for the other web application in the same farm as well?
It would be worth to check health of that particular application pool and the account used for it during the time you face the issue.
Veeramani.S -
Disable Multiple logins in the portal
Dear All,
I have an requirement to disable multiple logins in the portal from same user id. I don't think so it is possible in portal. My portal is EHP1 SPS6.
Do you guys know any of this standard functionality available in portal ?
Thanks
SunnyHi,
As Juan said, it seems that there is no standard settings available at the portal to disable the multiple logons.
Please have a look at this [thread|/message/7411465#7411465 [original link is broken]] which deals with the same issue.
Regards,
Varadharajan M -
Launch Portal Start page without IE toolbars
Hi guys,
We have this requirement where after user logs in and is authenticated, the portal contents to be displayed will appear in the window without IE toolbars. I have seen forum posts to
1. Customize the Log On page to insert javascript that will disable IE toolbars
However, we are using a 3rd-party loggin mechanism and thus will not use the standard SAP's logon page. This rules out this option for us.
Does anyone have any advice as to how we can go about to implement this?Isn't this the same question as you asked earlier (Re: To redirect the Enterprise portal logon page)
-
Change Page Title of embedded DS reports in the portal
Dear all,
we have our Design Studio Reports embedded in the Portal. The title of the browser window is the title of the navigation entry you are navigating to.
We have a demand where we need to overwrite the title from within the Design Studio Report to add a specific pattern to the title of the browser.
as an Example:
Name of the navigation entry: Report XY
Current browser title: Report XY
Target browser title: [DS] Report XY
I know from the ABAP Web Dynpro and CRM WebUI that there are standard functions to influence the title with customer code, when they are embedded in the portal.
Is there any way (hopefully without the use of the SDK) to influence the browser window title from Design Studio Reports when embedded in the Portal?
Thanks a lot and best regards
FabianAll the links which is mentioned above is either they are doing it in code behind or javascript like document.title.
I want to change dynamically using ECMA script. the point i found here is if you use the below code you will get an error saying list "Pages" does not exists in the SharePoint site.
clientContext.Web.Lists.GetByTitle("Pages");
So i am wondering how can we change the page title of SharePoint hosted app ( Default.aspx) dynamically
Say example i have one text box and submit button. when give the title in the text box and click on submit the title should reflect in the page.
Navaneeth -
Need list of places where the portal configures the exchange host name
Hello,
Our exchange server is changing it's host name.
Can anyone please give me a list of <b>detailed places</b> at the portal, admin tool and config tool where I should apply this change?
Regards,
Royit is stored as encrypted nameNo it isn't. It is stored in a format defined in this case by Windows. There is no encryption here.
I want to know the list of unicode characters which are affecting the file namingIt would be considerably more sensible to find out the characters that are legal in filenames. There are a lot fewer of those ;-)
Personally I just use the ASCII characters excluding & and /. -
Unable to login to the Portal!! PRD!
HI all,
After renewing the Logon-Ticket-Keypair between the J2EE Engine (on the
Portal) and the ABAP server (on BW) in Visual administrator. Users cannot
sign in to the Portal, when putting username and password it bounces back
to the page without being signed in.
The only change made recently was putting creating the ticketkeypair in
Visual Admin and importing it to BW (strust)
I did that by exporting the crt and importing it to STRUSTSSO2 and added to the ACL list with the Portal system ID and client.
Please help me as this is a production system..Hi Samer,
You say "Users cannot
sign in to the Portal, when putting username and password it bounces back
to the page without being signed in."
Do you actually get "Authentication Failed" error message or just nothing. If it is nothing it suggests to me that the Login Stack is not configured correctly so it is not creating the SAP Logon Ticket any longer. If you can post the login stack for the ticket policy (I assume you use the ticket policy by default) perhaps it will make things clearer. After the BasicPassword module there should be a CreateTicket module.
Hope this helps,
Simon -
SSO Configuration in the Portal - Configtool screen greyed out
Hi,
I am trying to setup SSO to our AD server in our portal system.
However, when I go into the config tool to change the settings in the UME LDAP Tab - the screen is greyed out and I cannot change anything.
Anyone know how I can modify this screen?
DaveHi ,
You can opt for SAML.
Configuration from BASIS & Portal Side.
[Setup SAML 1.1-based Web SSO from NetWeaver CE to non-SAP systems ]
Configuration from Share Point side.
[http://technet.microsoft.com/en-us/library/ff607753.aspx]
Also you can check out the third party tool u201C btexx MOSS Integratoru201D .
[http://www.btexx.com/products/btexx-collaborationmanager/MOSS-WSS]
[http://www.btexx.com/products/btexx-collaborationmanager/video]
Regards
Sahil Kohli -
At University we have just completed migration to iPlanet Messaging Server 5.2. Users of UNIX and pine now have to identify twice to get email. As stated in the question, they have to login to their shell, and then pine forces another login. Each additional time they run pine to check email it requires a new login.
Is there any way to get rid of the additional authorizations required to read email after someone is successfully authenticated to our own student/faculty servers? Perhaps adding some sort of Kerberos ticket system?
Thank YouAt University we have just completed migration to iPlanet Messaging Server 5.2. Users of UNIX and pine now have to identify twice to get email. As stated in the question, they have to login to their shell, and then pine forces another login. Each additional time they run pine to check email it requires a new login.
Is there any way to get rid of the additional authorizations required to read email after someone is successfully authenticated to our own student/faculty servers? Perhaps adding some sort of Kerberos ticket system?
Thank You
Maybe you are looking for
-
Cut & paste no longer work in Safari with iOS 5
I can't seem to cut & paste text in Safari under iOS 5. Has that feature been removed?
-
Internet explorer works perfectly and firefox will not load any websites
-
OK now I have a weird problem, So I got my Iphone 3g on the 23rd of December, its been working perfectly, no problems at all, couldnt be happier, then all of the sudden, I turned it on this morning, was fiddling with maps, and all of the sudden it sa
-
Problems Installing BPA (Bpel Process Analytics)
Hi, I was installing BPA under my Applicattion Server 10g R2, first of all i've installed Oracle Bpel Process Manager 10.1.2, after that i started the installation of BPA, checking all the requirements, the installation first copy the files , and the
-
More package advice...
Hi there, I'm having a bit of a conceptual problem with packages. At the moment, I am using a bunch of common classes that will be used throughout my desktop swing applications. As I see it right now, if I compile my application and distribute it to