Accessing Printer through SNMP in powershell???

Hi,
I want to access the printer's toner level etc. information. I have installed the service on my Windows 7 both SNMP and Traps.
What I can not find out is that how do I access the printer using SNMP. What provider to install and how in WMI or through Powershell. What is the name of the name of the snapin? where is it located? how do I import it using import-module or how do I add
its provider in the wmi so that I get access to the cmdlets of it.
Your help is appreciated and thanks in advance !
Look forward to your solutions.
Sibtain

There is no support for SNMP in PowerShell. SNMP support for a printer comes from the printer vendor.
Contact you SNMP software vendor for assistance with SNMP.
¯\_(ツ)_/¯

Similar Messages

Access-list through SNMP

Hi!
I have Linksys SPS224G4.
I'm trying to create mac access-list and bing to interface by using SNMP.
Please advise me in what MIB can I find OID's to operate such functions?

These OID's lie in qosclimib.mib

How to access Access List information through SNMP?

Hi,
I wonder if it is possible to access a router's access lsit info (acl type, name, entries, stats) through SNMP.
Using the SNMP Object Navigator I have found a MIB and OIDs that should allow me to do just that:
Object
ciscoACLMIB
OID
1.3.6.1.4.1.9.9.808
MIB
CISCO-ACL-MIB ; - View Supporting Images
Description
"This MIB module defines objects that describe Cisco Access
Control Lists (ACL).
But clicking on the "Supported Images" link shows that this MIB is not supported in any IOS release? I have tested with an snmpwalk on a few routers with different IOS versions and I don't get any results:
SNMPv2-SMI::enterprises.9.9.808 = No Such Object available on this agent at this OID
Is there anyway to read the ACL info through SNMP? Can anybody explain me how to do this?
Thanks in advance.
Alberto

Hi Alberto,
Unfortunately ,it is not possible to get ACL information via SNMP.
there is an Enhancement BUG already been filed for the same.
CSCdu44167 no corresponding MIB for show access-list on a router .
Thanks-
Afroz
***Ratings Encourages Contributors ***

Accessing a printer through WRT54GL?

I have a WRT54GL that is working fine. I have a desktop running XP connected to a port on the back of the WRT54GL for internet access. I have a laptop running Vista which can access the internet wirelessly via the WRT54GL. All works well. I have a printer that has been a dedicated connection to the desktop but I would like to be able to share access to the printer with the laptop over the wireless connection. Can the WRT54GL be used to do this by connecting the printer to one of the ports on the back? Help!
Thanks.
wtridley

You didn't mention what printer you have, but if it's not network capable (no network interface port) then no, you can't do this without additional hardware. If it is network capable, then it could be as easy as plugging it into the router and adding it as a network printer on your computers.
You could just share the printer through the desktop. Only drawback is that you'll have to keep the desktop on to print.

F110 printing through a separate printer

Hi Guys,
How to set up F110 check prints through a different printer other than the local printer. Also does anyone knows how to install drivers in in SAP server so that users can slect different printers. I know its a basis issue. There is no Basis resource available at this time.
Regards
Madhu

Hi Kappy,
Ok, so I've looked into the matter further, and here is what I've found:
Firstly, I think I was wrong when I said earlier that the connection to the printer is ipp. Basically, I plugged into the ethernet port for the main office network (bypassing the router), and I could access a web interface for the printer at
http://printerhostname.local
This web interface gives an IP address. So I started the Printer Setup Utility and tried to add the printer using the given IP address under 'IP Printer.' When I did this I was able to find the printer (the right model number showed up), and add it to my printer list. However when I tried to send print jobs it didn't work! However, when plugged in directly via ethernet, the printer shows up under 'Bonjour' printers. When I selected this printer, I could send print jobs without any problems. What I take from this is that the printer is not actually setup with IP printing; does that seem like a reasonable conclusion?
About connecting the router to the ethernet port for the main office network, I'm actually connected directly via an ethernet cable, however I'm plugged into the WAN port (I access the internet through the main office network). Is it important that the connection is through the WAN port and not one of the four LAN ports? Sorry if I was unclear about the whole setup earlier.
Thanks again - I really appreciate the help,
nanoo

Always duplex printing when printing through cups server

I have about 6 printers which people normally accesses through a cups server running on a Linux box.
We have always printed through the cups server from the Macs we have - and this has always worked great (they get auto-detected as shared printers and so on).
But a few months ago something changed on the Macs - they can now ONLY print duplex - nomatter what i tell them to do in the print dialog. When printing first to a postscript file and then sending the postscript file to the printer (via terminal/lpr) everything gets printing correctly - but when using the printing dialog it always prints duplex.
When printing to the printers directly (many different models) everything works - but going through the cups server - only duplex.
All our Linux machines prints both duplex and simplex as they should, so the cups server isn't the problem.
Has anybody else had this problem?
Other OS

Armin,
You need to do the following to make the duplex printing work for postscript in Oracle Reports.
You need a printer with duplex option and an appropriate PPD file.
You also need the Unix tool sed to filter the output file.
The problem is that duplexing is enabled in the job level set up of the PostScript document but gets reset in the page set up because paper size and printer tray information is generated for every page. The workaround would be to write a script, which removes page level set-up information for the paper size and printer tray set up commands. As a side effect of this - it is no longer possible to switch the printer tray between pages.
Write a sed script file called 'duplexsed' with the following three lines. This
/^%%BeginPageSetup/,$ {
/^%%BeginFeature/,/^%%EndFeature/d
Copy the file to an appropriate directory, for example $ORACLE_HOME/bin.
Set the environment variable TK_PRINT:
TK_PRINT="sed -f $ORACLE_HOME/bin/duplexsed | lpr -l -s -P'%n' -#'%c'"
export TK_PRINT
Note that the print command is different for the various kinds of Unix.
You may need to refer your installation guide and make changes to the lpr command
Thanks
The Oracle Reports Team

Trying to find a way to add multiple google acounts to e printer through the cloud. c310a Photosmart

My wife and I have 2 separate Google Chrome cr48 laptops. In order to print we have to print through google cloud which is why I purchased this c310a. After registering her account to the printer, I try to register mine and get an error saying already registered to another acount. I would hope this printer can handle more than one google cloud account, because it would increase the practicality for buisnesses.

Hi timshep. If you have already 'shared' your printer in Google Cloud Print, and not getting the results you are looking for, maybe I misread your question.
Let me clarify. Google Cloud Print is only set up one time. After that, once the printer is shared by that 'master' Google' account with all of the other 'Google Accounts' that you want to be able to cloud print from will simply be able to access it, without adding the printer the same way the Master account set it up.
Now if I am way off base on what you are doing, here are some other questions that come to mind.
Are you trying to have multiple Google "Cloud" accounts listed in the HP Eprint App under the 'Cloud' option?
Or perhaps you specifically talking about Google CloudPrint App?
8. How do I use the Google Cloud Print app for Android? (Talks about multiple accounts)
https://support.google.com/cloudprint/?hl=en#3153824
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Setup restrictions to the printer through the embaded network adapter

I've recently prochesed an HP Officejet Pro K8600dn printer.
I've connected the printer to the internet through the embaded network adapter and it worked perfectly. Howerver, the printer can be freely used by anyone in my network so i'm wondering if there's a way to block certain ip's or to configure any of that in the printer?
Also, the EWS server that came with the printer works perfectly and i can access it through my web browser. I cannot find anything about configuring allowed or blocked ip's.
Thanks in advance for any help.

Not likely this printer is going to have that kind of security features. You'd be looking at something like a logon feature or Kerberos Authentication (which requires a dedicated server). This is just a simple open port that allows anything on the network to access the printer as long as it talks the right printer language.
That being said, the router configuration is a whole different animal. With the printer set up with a static IP, your router might allow you to restrict traffic to that address. You would need to check your router configuration or contact their support staff for assistance.
insert signature here

Help on printing through Output Server

It seems that when I print from test presentment to PDF or to the local printer through my Output Designer, I get two pages printing out which is correct. When I compile and run the .dat file through Adobe Central server, I am having the same .dat file print out 5 pages with blanks on the second and 4rth page. I have the job setup with two tasks called PGCNTGET and PGCNTSET. I would assume if my test presentment to PDF and local printer are printing correctly, it should print correctly through the server. I did remove the PGCNTGET and PGCNTSET tasks from the job and only used JFMERGe and in that scenario it does print correctly but of course without page numbering. Can you please suggest on how to debug this in Central since I am not as familiar with Central Server.

I've never used the PGCNT agents but debugging with Central requires that you set the "verbosity" for the agent(s) to
i trace
mode. This can be done using
b Central Control
on the server - which you may not have access to,
b or
it can be specified as an option for the task. If the task is defined in the job management database to include the
b @OtherJobTokens
parameter then it can be done using the
b ^job
line in the .dat file. For the print agent (JFMERGE) it is done with the
b -v
option (-v0 sets trace mode). If it is done using Central Control, then verbosity for the Print Agent would be set to
b -10
(don't forget to set it back to the current setting). The agent will then put all of its trace messages in the log file (usually jfserver.log) and you will need to get that file from the server (it is plain text). Note that there are some bogus messages and others are difficult to understand but it might point you in the right direction.

Can't get PC to be able to print through Rendezvous

I have an Airport Extreme connected by high speed cable. I have a PowerBook and an iMac. I have an HP PSC 2335 printer connected to the Airport Extreme and both my apple computers can access it through Rendezvous. However, my daughter has a Dell laptop and uses Windows XP Home. She also has a Wi-Fi card installed and has no problem accessing the Internet from the Airport. But she can't print, and I haven't been able to figure out how to solve that issue. When I try to add a printer on her computer, it cannot find the Rendezvous printer. Can anyone kindly help? Thanks! -- Katie

See iFelix's web site Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express.

Trying to print through Linksys router

Hey there,
I'm trying to get a co-worker's Macbook to print through the Linksys router we have set up in the office, but it's proving to be more difficult than I imagined.
I've located the printer through System Preferences, and strangely enough she DOES have Internet access (browser, mail, etc), however printing doesn't want to work for some reason.
Has anyone had experience networking Macs with Linksys routers? And if so, how can we get the Macbook to print through it?
Any advice is very appreciated.

hey, i did have the same problem for a while, i had a linksys router setup through a print server. if your printing through a print server, make sure that it has a static IP address and then just put in the information in the printers folder.
if your not using a print server, try enabling windows sharing, printer sharing and personal file sharing in system preferences > sharing folder.
Macbook (Black) Mac OS X (10.4.10) Core Duo 2.0GHz, 2GB RAM, 80GB HDD, 500GB LaCie External Hard Drive

Access Server through VIP (ACE 4710) but very slow

Re: Access Server through VIP (ACE 4710) but very slow
Hi Shiva
Kindly Help .....Accessing the server very slow.., Plz check my real configuration... this configuration is for application server and after this i have to configure more serverfarm for different server like webmail etc. in this ACE 4710. I have only one ACE 4710 .
ACE Version A4(2.0) = is there supports Probe with this version.??? without probe server will work but very slow. And plz guide Nat-pool is required
VIP :-- 172.16.15.8
LB/Admin# sh run
Generating configuration....
no ft auto-sync startup-config
logging enable
logging host 172.29.91.112 udp/514
resource-class RC1
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-mz.A4_2_0.bin
hostname LB
interface gigabitEthernet 1/1
description Management
speed 1000M
switchport access vlan 1000
no shutdown
interface gigabitEthernet 1/2
description clientside
switchport access vlan 30
no shutdown
interface gigabitEthernet 1/3
description serverside
switchport access vlan 31
no shutdown
interface gigabitEthernet 1/4
no shutdown
context Admin
description Management
member RC1
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
probe http probe1
description health check
interval 5
passdetect interval 10
request method head
expect status 200 200
open 1
rserver redirect https_redirect
description redirect traffic to https
webhost-redirection / 302
inservice
rserver redirect maintenance_page
description maintenance page displayed
webhost-redirection /sry.html 301
inservice
rserver host web1
ip address 192.168.10.3
inservice
rserver host web2
ip address 192.168.10.4
inservice
rserver host web3
ip address 192.168.10.5
inservice
serverfarm host http
rserver web1
    inservice
rserver web2
    inservice
rserver web3
    inservice
serverfarm redirect https_redirect_farm
description Redirect traffic to https
serverfarm redirect maintenance_farm
description send user to maintenance page
parameter-map type connection paramap_http
description parameter connection tcp
exceed-mss allow
sticky ip-netmask 255.255.255.0 address source Sticky_http
timeout activeconns
serverfarm http
class-map match-all REMOTE-ACCESS
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
class-map match-all slb-vip
2 match virtual-address 172.16.15.8 tcp eq www
policy-map type management first-match remote_access
class class-default
    permit
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
policy-map type loadbalance first-match slb
class class-default
    serverfarm http
policy-map type inspect http all-match slb-vip-http
class class-default
    permit
policy-map multi-match client-vips
class slb-vip
    loadbalance vip inservice
    loadbalance policy slb
    loadbalance vip icmp-reply active
    inspect http policy slb-vip-http
    connection advanced-options paramap_http
interface vlan 30
description "Client Side"
ip address 172.16.15.24 255.255.255.0
access-group input everyone
service-policy input client-vips
no shutdown
interface vlan 31
description "Server Side"
ip address 192.168.10.1 255.255.255.0
service-policy input remote_access
no shutdown
interface vlan 1000
description managment
ip address 172.29.91.110 255.255.255.0
service-policy input remote_mgmt_allow_policy
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.15.1
snmp-server contact "PHQ"
snmp-server community phq group Network-Monitor
snmp-server trap-source vlan 1000
username admin password 5 $1$b2txbc5U$TA74D920oSdd2eOZ4hSFe/ role Admin domain
default-domain
username www password 5 $1$.GuWwQEK$r8Ub4OcE3l190d5GA4kvR. role Admin domain de
fault-domain
username prem password 5 $1$8C7eRKrI$it3UV4URZ26X4S/Bh6OEr0 role Admin domain d
efault-domain
ssh key rsa 1024 force
banner motd # "ro" #
Regards,
Prem

Hi Shiva,
plz guide i'm new with ACE LB, also find my n/w design for connected ace to server. but server accessing very very slow, but when i connect through my old server software LB (with two interface)then accessing very fast. I just replace my old serverLB(with two interface) to ACE4710 and connect the same scenario then why not server accessing smoothly with VIP .Reply soon only I connect ACE's two interface with switch.....
Regards,
Prem

Someone outside of my network is printing through my wireless

Someone outside of my home network is printing through my wireless network. I have an HPb210e. How do Iadjust the printer settings to stop this?
Thank you

Are you using the printer as a standalone device or is it associated with an wireless access point?
Follow the instructions on this document to change the security type to WPA if you have it set up using WEP. Change the network key as well.
WEP is the currrently weakest security type available. It is very easy for anyone who is so inclined, to crack it and get your passphrase.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Can Connect to Printer through ethernet network cable, but not through Time Capsule connected to ethernet

I am a lone Mac user in a very large, unsympathetic institution. If I plug my MacBook Air into the ethernet cable in my office directly, I can print through the office printer. If I plug the ethernet cable into a Time Capsule and connect my Air to the capsule wirelessly I cannot print to the office printer. I can access the internet, so I know it isn't a problem with any of the hardware or the wireless connection.
Is it possible that the network, because of Time Capsule, shuffles me into a different subnet than the printer? Why would it do this? How would it know? Is there any kind of fix possible? (I use the Thunderbolt port to connect my Air to a monitor, so I can't use it to connect to an ethernet cable).
Thanks.

CuriousMacUser wrote:
Thank-you very much for this. How do I tell if it is in routher and bridge? How do I change it?
Tell me the IP address when you plug into the main network and can print..
Tell me the IP address when you connect wirelessly via the TC.
If they are the same IP range.. then you are on a bridged TC.. if they are different. Then you are on router mode TC and should bridge it.

Splwow64.exe crash accessing printer properties page

Accessing the printer properties page fails in all instances.Some programs just crash with no error message, others do not crash, yet give the error: "C:\Windows\Splwow64.exe Function address 0x3506b9e2 caused a protection fault (exception code 0xc0000005) Some or all property pages may not be displayed" I have gone through the steps outlined here with no success. http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/hp-laserjet-1536dnf-MFP-printer-properties-window-flashes/td-p/3086811 I should note that I can still print...I just cannot access the printer property pages under any circumstances. Also, attempting to access printer properties via control panel > devices and printers crashes Windows explorer. Accessing printing preferences from the same location does nothing. Will not open. Thank you.

Hi , Welcome to the HP Forums! I noticed that you are unable to access the printer properties page, for your HP Laserjet 1536dnf MFP printer, on Windows 7. I am happy to help! Please try the following steps within this order: Uninstall the software. Uninstalling the Printer Software.Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Turn Windows Firewall on or off.Create a new user account. Managing User Accounts and Logins (Windows 7).Reinstall using the HP LaserJet Pro M1536dnf Multifunction Printer Drivers.. Then run the HP Print and Scan Doctor, to verify everything is working properly. Hope this resolves your issue! “Please click the Thumbs up icon below to thank me for responding.”

Accessing Printer through SNMP in powershell???

Similar Messages

Maybe you are looking for