Accessing Project Workplan tab via a link

What is the correct structure for the url to display the Projects Worplan Tab showing a Gantt Chart for a specific Project?

Ed - Just try it, it should work. Can you show an example of such a URL here?
We also have session state enabled, would we need to disable this?
Session State Protection? No, but the checksum type used in generating the link would have to be a "public or private bookmark" type. The checksum type can be specified in the call to apex_util.prepare_url.
My advice is to get the generic deep-linking behavior working first, then work on getting the SSP checksummed URL pieces working.
Scott

Similar Messages

Open project Activities tab by direct URL in P6 8.1 Web Access

Hello!
I'm trying to access project workspace in P6 Web Access v 8.1 by direct URL from another HTTP resource.
But P6 redirects me to another dialog (for choosing project from the list) if project is not opened before by clicking command Open from menu.
Does anyone know how to prevent the opening of a project selection dialog and go directly to the page of the project activities?
Now im using this format of URL:
http://primavera:7777/p6/action/pm/activities?projectId=1000&wbsId=20000&ProjectName=null&checkTabs=true

I face similar issue and as work around i copied the user profile and created new user.
It works fine with new user profile.
I think it happens sometimes we check new tab before loading previous one and because of that user profile get corrupt.

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

Project documentation tab - cannot access own templates

We are using SM4.0. In the project template I have created new document types and assigned templates to the document types. When using these to create docuements in the Blueprint Project Documentation tab, the templates are not defaulted, we just get a blank Word document.
The template are defautled for the standard SAP documents.
Any ideas why we are unable to use our custom documents with templates?

Thomas...
It should reflect in project documentation tab ...but some times it will not ...i had a same problem for couple of documentation templates...
The work around is ...once you create document type before saving attach the document template and then save it. instead of creating the document type + save +attach document template.
Hope this helps you,
Praveen

Can you access packages or sequences via a database link

I am trying to access a sequence through a database link.
Does anyone know if this is possible ?

Hi,
Thanks very much and I apology for the lack of information in the post.
I was trying to select from the sequence using
select myseq@my_link.nextval
from dual;
because of this i started looking at web site documentation and could not find any examples or any references to plsql packages or sequences using database links and the oracle documentation on links only specified selecting from tables or views.
this lead to my post whereas as you described it is my syntax that is the problem.
thanks again

Has anyone Been Able to Successfully Access the WVC54GC Cam via DynDNS.

I have been working on getting this camera for over a week now trying to get it to be accessable on the internet via DynDNS service with no luck. I have also tried other Dynamic DNS service providers like NO-IP and had no luck as well.
I already have an account with DynDNS and do not want to use the Linksys Sololink service and pay another fee. I called Linksys support and they notified me that this camera is only accessable on the internet via the Sololink Service.
Is this true has anyone figured out a way to use this with another service provider.
Pls. let me know. I bought 8 of these camera strickly to be able to monitor my place of business via the internet. If can not get this darn camera to work with DynDNS I will return them all.
Thanks.

HI...
You can try the following steps.
The camera will definitely work with DynDNS. Follow the following steps.
Access the camera setup page. Click on the tab that says "Options".
The Alternate Port should be set to enable and specify the port number that you wish to use. Default Port number is 1024. Apply the changes that we have made.
Now on the router setup page forward the same port number for the camera IP address.
Now when you use the DynDNS domain name use it as http://DynDNSDomainname:1024 and this will lead you to the camera over the Web.
In case you are using eight different camera........use a different port number and also a different IP address for each of the camera and specify the same on the router.
You can also refer to the following link to setup DynDNS with the linksys camera.
Click here to get to the link.

I cannot access the settings tab in the management console

I am in the management console for my verizon d-link router and i cannot access the settings tab..
i got to the router/verizon management console via the default gateway ip address and used the default password which worked and then tried to access settings which im assuming is the same default password.. however when i try to use the default password on the settings tab when im prompted it says that it is wrong.
is there some different password for the settings tab?

collado144 wrote:
I am in the management console for my verizon d-link router and i cannot access the settings tab..
i got to the router/verizon management console via the default gateway ip address and used the default password which worked and then tried to access settings which im assuming is the same default password.. however when i try to use the default password on the settings tab when im prompted it says that it is wrong.
is there some different password for the settings tab?
Have you tried to go here and select your Gateway, then follow the trouble shooting tips. Most gateways/routers default passwords at one point were changed to the serial number for security reasons. If that does not work, you may try resetting the gateway/router to get back to the default. Never leave your gateway/router with the default passwords. If you get into the gateway/router a Verizon firmware upgrade if it is a Verizon model, may even change the default password to the serial number so it is not the standard D-Link that is used with all their gateways.
DSL help.
http://www.verizon.com/Support/Residential/Internet/highspeedinternet.htm
The DSL Gateways can be found here.
D-Link 2750B Gateway?
http://www.verizon.com/Support/Residential/Internet/HighSpeed/Networking/2750BGateway/ATLAS6561.htm
There is a wealth of online information also available here.
http://www.verizon.com/Support/Residential/Internet/fiosinternet.htm

How to access the options tab without opening firefox in windows 8.1?

Recently moved from Windows XP to Windows 8.1. Used to be able to access the Firefox options tab via a context menu by right-clicking the icon in my Start Menu without having to open the browser window, which was useful for selectively deleting cookies, etc, after a browsing session.
Is this functionality still possible in Windows 8.1? If so, how? Or is this just another Windows 8 annoyance?
Thanks.

Thanks.
That does indeed do the job!

Changing fields in form opened in query mode via a link from a report

I have a summary report which allows me to access a form via a link: The form opens up with its fields populated with the corresponding record from the report.
Can additional code be added to the after displaying page section of the form such that some of the fields can be assigned with different values from those in the original record? If so, can anyone offer some sample code for this?

Hi,
You can access and set the values of the columns in forms by using certain apis. All the columns in the form are available in the session which can be accessed and set.
Sample Code
declare
flightno number;
ticketno varchar2(30);
tdate date;
persons number;
blk varchar2(10) := 'DEFAULT';
begin
flightno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_FLIGHT_NO');
ticketno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_TICKET_NO');
tdate := p_session.get_value_as_date(
p_block_name => blk,
p_attribute_name => 'A_TRAVEL_DATE');
persons := p_session.get_value_as_number(
p_block_name => blk,
p_attribute_name => 'A_NOF_PERSONS');
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_FLIGHTNO',
p_value => to_char(NULL)
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_TICKETNO',
p_value => to_char(NULL)
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_TRAVEL_DATE',
p_value => to_char(NULL)
end;
The above code sets and gets value of the form fields. The form field is accessed by prefixing "A" to the form column name. For example if the column name is "DEPTNO" then to access or set value to it you should refer to the session variable "A_DEPTNO".
Thanks,
Sharmila

Sharing an imported PDF via a link

I uploaded/imported an AcroForm to my FormCentral (FC) account, added the submit button in FC and now I'd like to share a link to the file for users to access the form, vs me having to send them a the Submission-Enabled PDF version that I downloaded.
I thought there was a way to share the PDF via a link, however, the "copy fillable form link" button is greyed out. My understanding is that the form that I uploaded to my FC account is hosted on the Adobe server, so why can't I generate a link that I can have others point to - to access the form? Or is the option to share direct links to the form ONLY for Web/HTML forms created within FC?
Please advise.

Hi;
The Import AcroForm feature allows you to use a form you have already authored, not requiring you to re-author in FormsCentral, to collect your data in FormsCentral and access features like Submission Reciepts, Notifications and the reporting available allowing you to share access to the responses etc. The Imported PDF does not create an HTML fillable form and does not provide any URL to the form.
You can host your form on a website and create a link to download the PDF from there rather than attaching the PDF to email, but there is no URL provided by FormsCentral. How complex is your form? Could you re-create it using our authoring?
Thanks,
Josh

Help needed to access a file from and email link.

I received an email with a link to an Adobe document. When I attempt to open the link I receive a message " You do not have accewss to the file" How do I gain access?

Then it is the case I mentioned, the author sent the URL from the address bar viewing the form in Edit mode rather than copying the Fillable Form link.
You'll need to respond to the form author and ask them to send out the correct link/URL to the fillable form (which does not ask for any login). They can go to the "Distribute" tab and on the "Web Form" sub-tab click "Copy Link", if the form is "Closed" it will ask if they want to "Open" the form, the form needs to be in the "Open" state to collect responses so say "Yes". This will copy the link to their clipboard and they can then send that link/URL out.
Also, if they close the form (by clicking the X in the upper right corner) and are looking at the "My Forms" tab in FormsCentral, with the form selected there is a "Link" button in the toolbar along the top which copies the form URL to send out.
Here are a few documents that include information on how to distribute forms: https://www.acrobat.com/formscentral/en/quickstart/distribute-web-form.html
http://forums.adobe.com/docs/DOC-1413
http://helpx.adobe.com/acrobat-com/formscentral/topics.html
Thanks,
Josh

Accessing Windows CIFS Shares via Nautilus

Hi,
I've recently installed and configured Solaris 11, am having problems accessing Windows CIFS shares via Nautilus.
I've installed both samba (needed for CUPS to print to printers connect to a windows pc) and smb/client. The smb/client and samba services are running. The smb/server service is not installed.
I can print to any printer on the windows PC I'm trying to access via Nautilus, so I know my username/password for accessing the pc are correct.
I can also manually mount any share on the windows PC via the cli (eg mount -F smfs -o user=elin //elink/users /mnt), and browse the files directly that way, except the file permisssions don't seem to align with any unix user. Again this just shows that the username/password combination is ok.
For Samba, I'm using the default smb.conf file as /etc/samba/samba.conf. Workgroup is set to WORKGROUP in smb.conf.
On the Windows pc, in the security event viewer, I can see the auth request, however is failing with bad password (event ID 4776, error code 0x006a). In the default group policy object for networking, I've set to accept "LM & NT, NTLMv2 when neogiatated", as this allows legacy clients to connect. (Legacy meaning NT4, Win95, etc, and also has the benefit of allowing other OSes to connect as well).
I'm also able to access the WIndows PC CIFS shares from an Arch Linux based setup (running GNOME 3.2 w/ Nautilus 3.2), so I doubt it's the Windows side of things causing the problems. Additionally, when I was running Solaris 10u9 (just before upgrading to Sol11), I was able to access the shares via Nautilus as well.
So my question is:
1. Does Nautilus use Samba or the Oracle smb/client service to handle mount windows CIFS shares?
2. What log files or configuration files do I need to looking at to help with this error?
As a side question,
I've found that on a clean installation running the "Print Manager" accesses CUPS fine, but once you install a printer, it'll no longer connect to CUPS, unless run from the cli "sudo system-config-printers". So this is a permissions issue, where's the best place to fix/handle that one.

Replying to my own thread, as I have a possible but very-hackish solution.
To add some further details to my original post.
There are 4 PCs on the LAN.
1. Hellfire - OS = Solaris 11 11/11
2. Brimstone - OS = Arch Linux
3. Elink - OS = Win7 Pro x64 SP1
4. IsaacPC - OS = WinXP Home SP3
Attempting to connect to Elink from Hellfire, accessing CIFS shares via Nautulis fails. (Mounting shares via Nautulis fails, but works fine from CLI using 'mount' command which to my understanding uses the smb/client service to work). Elink also hosts all the printers on the LAN, a HP LJ1200 and an Epson Fax/Printer/Scanner.
Helfire does attempt to authenticate, as listed in the event logs on the Win7 PC (elink), but is returning bad password when using Nautulis. (but printing from hellfire to either printer on elink works fine, as does mounting CIFS shares using 'mount').
Booting the live CD of Solaris 11, also exhibits the same non-working behaviour when attempting to mount CIFS shares in Nautulis.
Attempting to access CIFS shares on elink from Brimstone (via Nautulis 3.2 within GNOME 3.2), or from IsaacPC works fine.
Hellfire configuration.
Samba is installed, but NOT running (samba is needed for accessing the printers on elink, as CUPS needs smbspool which is part of the samba package), and the native smb/client service is also running.
smb.conf is a direct copy of the default *.conf file, except the WORKGROUP is set to 'WORKGORUP'. There is a symlink to smb.conf in /etc/sfw/smb.conf -> /etc/samba/smb.conf
Onto the hackish-fix.
I've noticed that there are 2 copies of libsmbclient.so installed on the system, one in /usr/sfw/lib (part of the "libsmbclient" package) and another in /usr/lib/samba (part of the "samba" package).
"libsmbclient" appears to be based on samba 3.5.8 codebase, and is linked to the gvfsd-smb daemon (this is the software that Nautulis uses to talk SMB to access CIFS shares).
"samba" is based on the samba 3.5.10 codebase, and it's installation has nothing to do with GNOME or Nautulis in any manner.
Using any of the samba included tools to test SMB/CIFS functions, work with 1 minor exception (which I'll list below). eg, using smbclient I can list all shares on any PC on the LAN, etc.
So as a hunch, I renamed the libsmbclient.so.0 in /usr/sfw/lib, and symlinked /usr/sfw/lib/libsmbclient.so.0 -> /usr/lib/samba/libsmbclient.so.0 (so that gvfsd-smb is linked against the slightly newer version of the libsmbclient.so as included in the samba package located in /usr/lib/samba).
I rebooted Hellfire, and now I'm able to access CIFS shares via Nautulis, provided that some form of authentication is needed (that is a username and password is needed - guest access and blanks passwords don't work - but these IMO should be disabled immediately as part of a baseline security package in regards to Windows - so no harm there).
Now to the minor exception I noted earlier. When using smbclient to actually connect and transfer files, I get:
ld.so.1: smbclient: fatal: relocation error: file /usr/lib/libreadline.so.5: symbol tgetent: referenced symbol not found
As far as I know, tgetent is part of libtermcap.so, so I guess when building smbclient or libreadline.so, the link reference to termcap was left out? (or something like that). Anyway, that's another issue...

Executing sql server procedure from oracle via db link with out parameters

HI
we have successfully created the link between oracle and sql server via DB LINK also able to access table from the
sqlserver via dblink
Can any one tell me how to execute procedure with 1 input and 4 out parameters from pl\sql
is it possible using
dbms_hs_passthrough

You should be able to call it like you would any other procedure:
dbo.procedure_name@dblink(parameter_list);

Multi-Row insert/update/delete not working via db-link

App. Version: 2.0.0.00.49
DB: Oracle 9i, not sure about the build
Problem: Multirow Update/Insert/Delete doesn't work via db-link.
Error received: ....ORA-1460: unimplemented or unreasonable conversion requested....
Where: Tabular Form generated via Wizard
Side note: It's working properly when local table(s) is/are used, it's not working via db-link or view.
I've encountered this error with single update/insert/delete operations before, but was able to fix it via using temp-variables (v_xyz := :Px_xyz; as the proposed v('Px_xyz') was really slow with my scripts)...but with the automated DML-action I don't see a way to edit it accordingly.
Workaround found:
1a) Use local* collection on HTML-DB-Server, then write single row updates/deletes/inserts to the remote DB via DB-Link
1b) Use local* table on HTML-DB-Server, then write single row updates/deletes/inserts to the remote DB via DB-Link
* Local = on the same server that HTML-DB is running on...
So,...to my questions:
1. Can someone confirm that this is a "known feature" (aka bug)?
2. Can someone tell me if this "known feature" has been eliminated in the newer version of HTML-DB/APEX (> 2.0.0.00.49)?
Thanks.
Ingo

Hi,
Do you have a small test case program that demonstrates this? A JDeveloper project showing what exactly is the problem when trying to use the BDB SQL JDBC driver to insert data into the BDB SQL database? What do you mean by "not working", do you get any errors, you do not get errors but you do not see the data in the database etc?
What are the versions of Java, JDeveloper, ADF and BDB SQL you are using, and on what OS?
Regards,
Andrei

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

Accessing Project Workplan tab via a link

Similar Messages

Maybe you are looking for