Accessing separate drive with Personal Web Sharing

Is it possible to simply use Personal Web Sharing to access an external Firewire hard drive?
I have zero experience with Apache or most server operations. I can set up pretty basic sites with Dreamweaver and/or simple HTML. So if it is possible but difficult, I may need step by step instructions.
I would really like to access this drive because it is easier to keep the large video files on it, but I would like to transfer them to my PS3 on a semi-regular basis. My PS3 has no problem accessing my sites folder (other than not showing the directory so I have to code an index file for it).
Any way I can redirect my PS3 to my external drive using the Web sharing feature? Or is it exclusive to my users drive?
Sorry to ask a simple question, but I can't seem to find the answer anywhere.
Help is greatly appreciated to either of my problems. Accessing an external drive or figuring out why I get 403 Forbidden messages unless I code an index file.

Is this drive connected to your computer? Are you trying to access the computer remotely? If so then you need to turn on file sharing and remote access.

Similar Messages

  • Help needed with Personal Web Sharing

    I need a little help. My goal is to set up my Apache server to allow people on the Internet access web pages served from my Mac. But I can't seem to get it working.
    Here's what I've done so far:
    1. I have enabled Personal Web Sharing in System Preferences
    2. I have talked with the technicians at my ISP, and they tell me that they are not blocking port 80
    3. My router has DHCP enabled, but I have assigned my Mac a static IP address (192.168.1.xx) that is outside the range of DHCP addresses.
    4. I am using a cable modem connected to a Linksys WRT54G router, and I have configured the WRT54G to forward port 80 to my Mac's IP address (192.168.1.xx).
    5. I have determined my Internet IP address by using http://checkip.dyndns.org/
    The result:
    1. When I use Safari to access 192.168.1.xx from my Mac, I see my web pages perfectly. Life is good.
    2. However, when I try to access my web pages from a browser on a WindowsXP computer on my local network, I just time out. I have tried both my LAN IP address (192.168.1.xx) and the Internet IP address I obtained from http://checkip.dyndns.org/
    I have looked on the Apple support and discussion pages, but I haven't been able to find anything that will fix this. Any help would be greatly appreciated.
    Thanks,
    -AstraPoint

    Charlie:
    Thanks for the tip about the W3C HTML Markup Validation Service. Answers to your questions are in CAPS. And, thanks for any help you can provide.
    ===================
    1. Can the Mac ping the Windows computer and vice versa? YES Are you sure the Mac is able to reach the Internet outside your LAN, can you browse the web from it? YES, I HAVE A WORKING, HIGH-SPEED CONNECTION TO THE INTERNET FROM MY MAC.
    2. What happens if you use the WAN IP address in Safari on the Mac and try to load the web page? Does it still time out? YES. WHEN I PUT THE ADDRESS I RECEIVED FROM http://checkip.dyndns.org/ INTO THE URL FIELD IN SAFARI, IT TIMES OUT. WHEN I DO THE SAME THING USING USING THE LOCAL LAN IP ADDRESS OF MY MAC, IT WORKS PERFECTLY.
    And a comment:
    Even once you get the Windows computer to see the web site on the Mac via your LAN, it's possible you won't be able to use the WAN IP address to reach it. That's called "loopback", and some routers don't allow that. If that's the case, you can test your connection by using some other site to reach your site.
    What I like to do in cases like this is to use the W3C HTML Markup Validation Service. Since it's completely outside your LAN, it acts like any regular browser to your site. If it can't reach your site, then no one can. But if it reaches your site and you still can't, then your router probably doesn't support loopback. Plus, it'll point out any mistakes in your HTML markup if you have any...

  • For those of you still having Personal Web Sharing problems

    With Personal Web Sharing, Leopard doesn't seem to bring the config files for individual user accounts over from the apache1 directory to the apache2 directory which is why sometimes when you visit http://localhost/~username you get a 403 error message.
    The solution is to Go To Folder, /etc, find the httpd -> users folder and copy all the files in there (should be one for each user account) into apache2 -> users and restart Personal Web Sharing.
    If you're still having problems, one of the issues is with Filevault. If you have Filevault turned on, Personal Web Sharing will still probably give you an error for your user account, but the system wide web server will be fine.

    Tried this but still does not work. Also from another computer I cannot access the user web share or the default one (locally I can access the default) without getting a 403. It just searches and searches. It recognises that there is a system there but not able to read anything. My firewall is off by the was so is Filevault.
    Thanks

  • Personal Web Sharing and Filemaker Server Advanced

    After migrating from FileMaker Server-7 Advanced and installing version-8 Advanced web components (w/Easy Install) and restarting the Mac, Personal Web Sharing refuses to activate. I also cannot access the Filemaker Admin Console to create the FMSA account to register it with the database server.
    OSX Console log listed this error below when trying to start Apace with Personal Web Sharing:
    Syntax error on line 1 of /Library/FileMaker Server/Web Publishing/web-configuration/WEB-INF/conf/mod_jk.conf:
    Cannot load /usr/libexec/httpd/modjkfm.so into server: (reason unknown)
    /usr/sbin/apachectl start: httpd could not be started
    Line 1 of the mod_jk.file reads:
    LoadModule jkfmmodule libexec/httpd/modjkfm.so
    What needs to be corrected so I can start web sharing and access the FileMaker Web Publishing Engine in the browser?
    Using Mac OSX 10.4.6 on Mac Mini w/Intel dual core

    Apache is trying to load modjkfm.so which should be stored in /usr/libexec/httpd, but it isn't.
    This file should be installed by the Filemaker Server installer. If it wasn't installed by the Easy Install option, check the other install options to see if it's there.

  • Personal Web Sharing - Don't have permission to access...

    Hi,
    I'm new here so I'm not sure the best place to post my question.
    I posted the question below at the tail end of this discussion:
    http://discussions.apple.com/thread.jspa?threadID=663879&tstart=0
    However, that thread is marked "answered" and my question isn't, so I am re-posting here. Please read the above thread so that you'll know what I already know and have done.
    My question (if you haven't read it at the bottom of that thread):
    I am trying to set up personal web sharing, I have followed all of the above discussion, including Port Forwarding from my router. (I had actually done all of this before searching here, getting instructions from "The Missing Manual: Panther Edition" book.)
    The problem is: when I try to access my shared web pages, I get a "You don't have permission to access..." message.
    I have changed permissions on all files in the (user)/Sites folder (the one I'm sharing) so that "Others" can "Read Only" but still I cannot access these pages from another computer via the internet. I can access them fine from my home computer.
    I know everything is set up correctly and connecting because the remote browser correctly retrieves my computer name (where the shared files are) and port number. It just won't let me in.
    Any help appreciated.
    thanks,
    Eric
    G4 Mac OS X (10.3.9)

    braintrino,
    I'm not sure how to make sense of your statements.
    The situation with FileVault is conceptually simple. The contents of a FileVault user's home directory are on an encrypted disk image. When the user logs in from the login window, that image is mounted (using their home directory path as the mount point); when they log out, the image is unmounted. Note that logging in via ssh doesn't cause the system to mount their home directory...
    So, when a user is logged in, Apache can (if normal UNIX permissions permit it) see their ~Sites folder and serve pages. When the user is logged out, Apache can't.
    I suppose that a FileVault user might be able to get around this, if they don't mind leaving their ~Sites folder unencrypted... They could create a folder outside of their home directory (e.g., /Users/Shared/braintrinos_site/) and put their Web pages there; log into their account and replace their ~Sites folder with a symbolic link to their Web page directory; log out, then ssh in and add a symbolic link from their home directory to their Web page directory. Then, whether they're logged in or not, Apache should be able to see a symbolic link from ~Sites to the unencrypted Web page directory.
    Powerbook G4 1GHz   Mac OS X (10.3.9)  

  • Use Personal Web Sharing to Serve an External Drive?

    I have many files on one of my external drives that I need to serve up via Personal Web Sharing. While http://localhost/~username works great, I can't figure out how to share that external drive.
    I have tried creating both a Finder alias and an actual symlink to the drive within my ~/Sites/ directory but neither work.
    Is this possible?

    What do you mean by indefinite exactly?
    Have you repaired permissions since installing PHP5?
    Indefinite, as it forever stays as 'Web Sharing starting up...'. Yes, I have repaired perms.

  • Personal Web Sharing trouble with moved / Users ?

    Can Personal Web Sharing work when /Users has been moved to another partition? Situation: Apache is running on my Mac OS 10.4.10 system. It will serve my files to a distant computer if I put symlinks to them in /Library/WebServer/Documents (and Personal Web Sharing is on). However, it won't serve the same files from http://my.machine.com/~username -- Console reveals code 301 on attempts these attempts. (Interestingly, nothing appears in Console access_log if Personal Web Sharing is off during an attempt at http://my.machine.com/~username.) All of these makes me guess that Apache is basically OK, that System Preferences Personal Web Sharing knows where to find my personal Sites, but there is some problem when Apache goes for my user directory. Any suggestions?

    Hi--
    You need to figure out the full path to your directory on the other partition and add that the file for that user that's in /etc/httpd/users. So, open the Terminal application from your Utilities folder, type "cd", then a space, and drag the "Sites" folder from your home folder to the Terminal window. That'll give you the full path to that file.
    Edit your user's config file (you'll need to use sudo) with a text editor like nano:
    <pre class="command">sudo nano /etc/httpd/users/username.conf</pre>
    Look for this line:
    <pre class="command"><Directory "/Users/username/Sites/"></pre>
    Change it to reflect the path you saw in the Terminal window. If the partition name has a space in it, be careful, Terminal will escape it:
    <pre class="command">/Volumes/Volume\ Name/username/Sites</pre>
    But since it's enclosed in quotes in the Apache config file, you'll want to dump the escape:
    <pre class="command"><Directory "/Volumes/Volume Name/username/Sites/"></pre>
    Don't forget to restart the web server.
    charlie

  • Please tell me how to reinstall Personal Web Sharing

    I did something to my Personal Web Sharing. I thought maybe it was the file permissions but they seem to be right. Owner is "myusername" and group is also "myusername". In any case Personal Web sharing will NOT turn on. Do I have to reinstall the OS X? This will be a pain since I have to start from the install cd's and work my way up to tiger. Seems like there should be an easier way, like can someone just give me a copy of the folder? Would that be the same for a g5. I am on tiger.
    thanks,

    I don't know which log you want but I looked in the filemaker server log. I wouldn't think the filemaker server has anything to do with why the personal file sharing can't be turned on? This was earlier today anyway.
    Mac OS X Version 10.4.11 (Build 8S165)
    2009-01-16 16:41:25 -0800
    Jan 16 16:41:26 J-Rs-Computer mDNSResponder: Adding browse domain local.
    2009-01-16 16:41:27.465 SystemUIServer[96] lang is:en
    Processing config directory: /private/etc/httpd/users/*.conf
    Processing config file: /private/etc/httpd/users/jr.conf
    Processing config file: /private/etc/httpd/users/user.conf
    fopen: No such file or directory
    httpd: could not open document config file /Library/FileMaker Server/Admin/admin-helper/WEB-INF/conf/mod_jk.conf
    /usr/sbin/apachectl start: httpd could not be started
    Debugger() was called!
    This was the FM SErver Advanced re- install. I keep trying to configure it and it sticks. This is where I notice the Personal WEb sharing doesn't work.
    2009-01-15 15:32:36.877 -0800 Information 488 serendipity Stopping FileMaker Server...
    2009-01-15 15:32:37.163 -0800 Information 488 serendipity Stopping FileMaker Server...
    2009-01-15 15:32:37.265 -0800 Information 410 serendipity Stopping FileMaker Database Engine...
    2009-01-15 15:32:37.719 -0800 Information 412 serendipity FileMaker Database Engine stopped.
    2009-01-15 15:32:37.737 -0800 Information 490 serendipity FileMaker Server stopped.
    2009-01-15 15:33:54.062 -0800 Information 162 J R’s Computer Starting FileMaker Server 9.0v1 (06-18-2007)...
    2009-01-15 15:33:54.215 -0800 Information 657 J R’s Computer Client access logging disabled.
    2009-01-15 15:33:54.245 -0800 Information 178 J R’s Computer Maximum size of log file: 40 MB
    2009-01-15 15:33:54.305 -0800 Information 658 J R’s Computer Email notification to administrators: None
    2009-01-15 15:33:54.369 -0800 Information 174 J R’s Computer Statistics logging disabled.
    2009-01-15 15:33:54.379 -0800 Information 614 J R’s Computer Maximum number of client connections permitted by FileMaker Server License: 250
    2009-01-15 15:33:54.421 -0800 Information 616 J R’s Computer Maximum number of Web Publishing Engine sessions permitted by FileMaker Server License : 100
    2009-01-15 15:33:54.458 -0800 Information 677 J R’s Computer XDBC connections are allowed by this FileMaker Server license.
    2009-01-15 15:33:54.542 -0800 Information 679 J R’s Computer IWP connections are allowed by this FileMaker Server license.
    2009-01-15 15:33:54.569 -0800 Information 606 J R’s Computer Default database location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Databases/
    2009-01-15 15:33:54.602 -0800 Information 622 J R’s Computer Additional database folder: Disabled
    2009-01-15 15:33:54.635 -0800 Information 620 J R’s Computer Runtime Solutions custom database extensions: Disabled
    2009-01-15 15:33:54.686 -0800 Information 434 J R’s Computer Default backup location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Backups/
    2009-01-15 15:33:54.734 -0800 Information 602 J R’s Computer Administrator authentication method: Require no password
    2009-01-15 15:33:54.793 -0800 Information 498 J R’s Computer Secure (SSL) Network Encryption: Disabled
    2009-01-15 15:33:54.813 -0800 Information 472 J R’s Computer Server scheduling enabled.
    2009-01-15 15:33:54.829 -0800 Information 74 J R’s Computer Maximum number of files to host: 50
    2009-01-15 15:33:54.866 -0800 Information 112 J R’s Computer The cache will flush every 1 minutes.
    2009-01-15 15:33:54.886 -0800 Information 466 J R’s Computer File list filtering: Disabled
    2009-01-15 15:33:54.912 -0800 Information 500 J R’s Computer Client authentication method: FileMaker accounts only
    2009-01-15 15:33:54.914 -0800 Information 596 J R’s Computer Disconnect idle clients disabled.
    2009-01-15 15:33:54.916 -0800 Information 492 J R’s Computer Sample statistics every 15 seconds.
    2009-01-15 15:33:54.918 -0800 Information 532 J R’s Computer Automatic updates disabled.
    2009-01-15 15:33:54.921 -0800 Information 406 J R’s Computer Starting FileMaker Database Engine...
    2009-01-15 15:33:55.717 -0800 Information 637 J R’s Computer Open files without consistency check: Disabled
    2009-01-15 15:33:55.718 -0800 Information 116 J R’s Computer Server host name type: System
    2009-01-15 15:33:55.729 -0800 Information 613 J R’s Computer Maximum number of client connections configured in FileMaker Server: 250
    2009-01-15 15:33:55.795 -0800 Information 615 J R’s Computer Maximum number of Web Publishing Engine sessions configured in FileMaker Server : 100
    2009-01-15 15:33:55.841 -0800 Information 166 J R’s Computer Database cache size: 64 MB.
    2009-01-15 15:33:55.842 -0800 Information 608 J R’s Computer XDBC connections are not allowed.
    2009-01-15 15:33:55.876 -0800 Information 408 J R’s Computer FileMaker Database Engine started.
    2009-01-15 15:33:58.009 -0800 Information 486 J R’s Computer FileMaker Server started.
    2009-01-15 15:33:58.054 -0800 Information 418 J R’s Computer Opening database "FMServer_Sample"...
    2009-01-15 15:33:59.322 -0800 Information 184 J R’s Computer Opened database "FMServer_Sample".
    2009-01-15 15:34:31.054 -0800 Information 518 J R’s Computer Administrator connected: "fmsadmin" (192.168.1.88).
    2009-01-16 11:50:10.879 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 11:50:11.197 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 11:50:11.208 -0800 Information 410 J R’s Computer Stopping FileMaker Database Engine...
    2009-01-16 11:50:11.286 -0800 Information 140 J R’s Computer Closing database "FMServer_Sample"...
    2009-01-16 11:50:11.289 -0800 Information 168 J R’s Computer Database "FMServer_Sample" closed.
    2009-01-16 11:50:11.715 -0800 Information 520 J R’s Computer Administrator disconnected: "fmsadmin" (192.168.1.88).
    2009-01-16 11:50:12.530 -0800 Information 412 J R’s Computer FileMaker Database Engine stopped.
    2009-01-16 11:50:12.531 -0800 Information 490 J R’s Computer FileMaker Server stopped.
    2009-01-16 12:05:07.028 -0800 Information 162 J R’s Computer Starting FileMaker Server 9.0v1 (06-18-2007)...
    2009-01-16 12:05:07.044 -0800 Information 657 J R’s Computer Client access logging disabled.
    2009-01-16 12:05:07.058 -0800 Information 178 J R’s Computer Maximum size of log file: 40 MB
    2009-01-16 12:05:07.065 -0800 Information 658 J R’s Computer Email notification to administrators: None
    2009-01-16 12:05:07.066 -0800 Information 174 J R’s Computer Statistics logging disabled.
    2009-01-16 12:05:07.068 -0800 Information 606 J R’s Computer Default database location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Databases/
    2009-01-16 12:05:07.069 -0800 Information 622 J R’s Computer Additional database folder: Disabled
    2009-01-16 12:05:07.070 -0800 Information 620 J R’s Computer Runtime Solutions custom database extensions: Disabled
    2009-01-16 12:05:07.071 -0800 Information 434 J R’s Computer Default backup location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Backups/
    2009-01-16 12:05:07.072 -0800 Information 602 J R’s Computer Administrator authentication method: Require no password
    2009-01-16 12:05:07.074 -0800 Information 498 J R’s Computer Secure (SSL) Network Encryption: Disabled
    2009-01-16 12:05:07.079 -0800 Information 614 J R’s Computer Maximum number of client connections permitted by FileMaker Server License: 250
    2009-01-16 12:05:07.080 -0800 Information 616 J R’s Computer Maximum number of Web Publishing Engine sessions permitted by FileMaker Server License : 100
    2009-01-16 12:05:07.106 -0800 Information 677 J R’s Computer XDBC connections are allowed by this FileMaker Server license.
    2009-01-16 12:05:07.108 -0800 Information 679 J R’s Computer IWP connections are allowed by this FileMaker Server license.
    2009-01-16 12:05:07.130 -0800 Information 74 J R’s Computer Maximum number of files to host: 50
    2009-01-16 12:05:07.131 -0800 Information 112 J R’s Computer The cache will flush every 1 minutes.
    2009-01-16 12:05:07.203 -0800 Information 466 J R’s Computer File list filtering: Disabled
    2009-01-16 12:05:07.218 -0800 Information 500 J R’s Computer Client authentication method: FileMaker accounts only
    2009-01-16 12:05:07.266 -0800 Information 596 J R’s Computer Disconnect idle clients disabled.
    2009-01-16 12:05:07.331 -0800 Information 492 J R’s Computer Sample statistics every 15 seconds.
    2009-01-16 12:05:07.345 -0800 Information 532 J R’s Computer Automatic updates disabled.
    2009-01-16 12:05:07.375 -0800 Information 406 J R’s Computer Starting FileMaker Database Engine...
    2009-01-16 12:05:07.377 -0800 Information 472 J R’s Computer Server scheduling enabled.
    2009-01-16 12:05:07.827 -0800 Information 637 J R’s Computer Open files without consistency check: Disabled
    2009-01-16 12:05:07.829 -0800 Information 116 J R’s Computer Server host name type: System
    2009-01-16 12:05:07.830 -0800 Information 613 J R’s Computer Maximum number of client connections configured in FileMaker Server: 250
    2009-01-16 12:05:07.832 -0800 Information 615 J R’s Computer Maximum number of Web Publishing Engine sessions configured in FileMaker Server : 100
    2009-01-16 12:05:08.037 -0800 Information 166 J R’s Computer Database cache size: 64 MB.
    2009-01-16 12:05:08.040 -0800 Information 608 J R’s Computer XDBC connections are not allowed.
    2009-01-16 12:05:08.056 -0800 Information 408 J R’s Computer FileMaker Database Engine started.
    2009-01-16 12:05:11.047 -0800 Information 486 J R’s Computer FileMaker Server started.
    2009-01-16 12:05:11.065 -0800 Information 418 J R’s Computer Opening database "FMServer_Sample"...
    2009-01-16 12:05:11.423 -0800 Information 184 J R’s Computer Opened database "FMServer_Sample".
    2009-01-16 12:05:35.063 -0800 Information 518 J R’s Computer Administrator connected: "fmsadmin" (192.168.1.88).
    2009-01-16 12:46:01.114 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 12:46:01.287 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 12:46:01.289 -0800 Information 410 J R’s Computer Stopping FileMaker Database Engine...
    2009-01-16 12:46:01.676 -0800 Information 140 J R’s Computer Closing database "FMServer_Sample"...
    2009-01-16 12:46:01.685 -0800 Information 168 J R’s Computer Database "FMServer_Sample" closed.
    2009-01-16 12:46:02.201 -0800 Information 412 J R’s Computer FileMaker Database Engine stopped.
    2009-01-16 12:46:02.214 -0800 Information 490 J R’s Computer FileMaker Server stopped.
    2009-01-16 13:03:06.108 -0800 Information 162 J R’s Computer Starting FileMaker Server 9.0v1 (06-18-2007)...
    2009-01-16 13:03:06.143 -0800 Information 657 J R’s Computer Client access logging disabled.
    2009-01-16 13:03:06.144 -0800 Information 178 J R’s Computer Maximum size of log file: 40 MB
    2009-01-16 13:03:06.145 -0800 Information 658 J R’s Computer Email notification to administrators: None
    2009-01-16 13:03:06.145 -0800 Information 174 J R’s Computer Statistics logging disabled.
    2009-01-16 13:03:06.146 -0800 Information 606 J R’s Computer Default database location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Databases/
    2009-01-16 13:03:06.147 -0800 Information 622 J R’s Computer Additional database folder: Disabled
    2009-01-16 13:03:06.148 -0800 Information 620 J R’s Computer Runtime Solutions custom database extensions: Disabled
    2009-01-16 13:03:06.377 -0800 Information 434 J R’s Computer Default backup location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Backups/
    2009-01-16 13:03:06.379 -0800 Information 602 J R’s Computer Administrator authentication method: Require no password
    2009-01-16 13:03:06.385 -0800 Information 498 J R’s Computer Secure (SSL) Network Encryption: Disabled
    2009-01-16 13:03:06.526 -0800 Information 614 J R’s Computer Maximum number of client connections permitted by FileMaker Server License: 250
    2009-01-16 13:03:06.578 -0800 Information 616 J R’s Computer Maximum number of Web Publishing Engine sessions permitted by FileMaker Server License : 100
    2009-01-16 13:03:06.623 -0800 Information 677 J R’s Computer XDBC connections are allowed by this FileMaker Server license.
    2009-01-16 13:03:06.667 -0800 Information 679 J R’s Computer IWP connections are allowed by this FileMaker Server license.
    2009-01-16 13:03:06.701 -0800 Information 74 J R’s Computer Maximum number of files to host: 50
    2009-01-16 13:03:06.752 -0800 Information 112 J R’s Computer The cache will flush every 1 minutes.
    2009-01-16 13:03:06.802 -0800 Information 466 J R’s Computer File list filtering: Disabled
    2009-01-16 13:03:06.838 -0800 Information 500 J R’s Computer Client authentication method: FileMaker accounts only
    2009-01-16 13:03:06.876 -0800 Information 596 J R’s Computer Disconnect idle clients disabled.
    2009-01-16 13:03:06.933 -0800 Information 492 J R’s Computer Sample statistics every 15 seconds.
    2009-01-16 13:03:06.948 -0800 Information 532 J R’s Computer Automatic updates disabled.
    2009-01-16 13:03:07.018 -0800 Information 406 J R’s Computer Starting FileMaker Database Engine...
    2009-01-16 13:03:07.058 -0800 Information 472 J R’s Computer Server scheduling enabled.
    2009-01-16 13:03:07.869 -0800 Information 637 J R’s Computer Open files without consistency check: Disabled
    2009-01-16 13:03:07.871 -0800 Information 116 J R’s Computer Server host name type: System
    2009-01-16 13:03:07.902 -0800 Information 613 J R’s Computer Maximum number of client connections configured in FileMaker Server: 250
    2009-01-16 13:03:07.916 -0800 Information 615 J R’s Computer Maximum number of Web Publishing Engine sessions configured in FileMaker Server : 100
    2009-01-16 13:03:08.106 -0800 Information 166 J R’s Computer Database cache size: 64 MB.
    2009-01-16 13:03:08.108 -0800 Information 608 J R’s Computer XDBC connections are not allowed.
    2009-01-16 13:03:08.127 -0800 Information 408 J R’s Computer FileMaker Database Engine started.
    2009-01-16 13:03:11.466 -0800 Information 486 J R’s Computer FileMaker Server started.
    2009-01-16 13:03:11.643 -0800 Information 418 J R’s Computer Opening database "FMServer_Sample"...
    2009-01-16 13:03:14.089 -0800 Information 184 J R’s Computer Opened database "FMServer_Sample".
    2009-01-16 13:03:42.578 -0800 Information 518 J R’s Computer Administrator connected: "fmsadmin" (192.168.1.88).
    2009-01-16 13:13:38.892 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 13:13:39.043 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 13:13:39.101 -0800 Information 410 J R’s Computer Stopping FileMaker Database Engine...
    2009-01-16 13:13:39.310 -0800 Information 140 J R’s Computer Closing database "FMServer_Sample"...
    2009-01-16 13:13:39.397 -0800 Information 168 J R’s Computer Database "FMServer_Sample" closed.
    2009-01-16 13:13:40.156 -0800 Information 412 J R’s Computer FileMaker Database Engine stopped.
    2009-01-16 13:13:40.170 -0800 Information 490 J R’s Computer FileMaker Server stopped.
    2009-01-16 13:20:11.976 -0800 Information 162 J R’s Computer Starting FileMaker Server 9.0v1 (06-18-2007)...
    2009-01-16 13:20:12.003 -0800 Information 657 J R’s Computer Client access logging disabled.
    2009-01-16 13:20:12.062 -0800 Information 178 J R’s Computer Maximum size of log file: 40 MB
    2009-01-16 13:20:12.063 -0800 Information 658 J R’s Computer Email notification to administrators: None
    2009-01-16 13:20:12.065 -0800 Information 174 J R’s Computer Statistics logging disabled.
    2009-01-16 13:20:12.066 -0800 Information 606 J R’s Computer Default database location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Databases/
    2009-01-16 13:20:12.067 -0800 Information 622 J R’s Computer Additional database folder: Disabled
    2009-01-16 13:20:12.069 -0800 Information 620 J R’s Computer Runtime Solutions custom database extensions: Disabled
    2009-01-16 13:20:12.071 -0800 Information 434 J R’s Computer Default backup location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Backups/
    2009-01-16 13:20:12.074 -0800 Information 602 J R’s Computer Administrator authentication method: Require no password
    2009-01-16 13:20:12.076 -0800 Information 498 J R’s Computer Secure (SSL) Network Encryption: Disabled
    2009-01-16 13:20:12.150 -0800 Information 614 J R’s Computer Maximum number of client connections permitted by FileMaker Server License: 250
    2009-01-16 13:20:12.152 -0800 Information 616 J R’s Computer Maximum number of Web Publishing Engine sessions permitted by FileMaker Server License : 100
    2009-01-16 13:20:12.210 -0800 Information 677 J R’s Computer XDBC connections are allowed by this FileMaker Server license.
    2009-01-16 13:20:12.235 -0800 Information 679 J R’s Computer IWP connections are allowed by this FileMaker Server license.
    2009-01-16 13:20:12.248 -0800 Information 74 J R’s Computer Maximum number of files to host: 50
    2009-01-16 13:20:12.282 -0800 Information 112 J R’s Computer The cache will flush every 1 minutes.
    2009-01-16 13:20:12.283 -0800 Information 466 J R’s Computer File list filtering: Disabled
    2009-01-16 13:20:12.285 -0800 Information 500 J R’s Computer Client authentication method: FileMaker accounts only
    2009-01-16 13:20:12.286 -0800 Information 596 J R’s Computer Disconnect idle clients disabled.
    2009-01-16 13:20:12.287 -0800 Information 492 J R’s Computer Sample statistics every 15 seconds.
    2009-01-16 13:20:12.291 -0800 Information 532 J R’s Computer Automatic updates disabled.
    2009-01-16 13:20:12.293 -0800 Information 406 J R’s Computer Starting FileMaker Database Engine...
    2009-01-16 13:20:12.294 -0800 Information 472 J R’s Computer Server scheduling enabled.
    2009-01-16 13:20:12.866 -0800 Information 637 J R’s Computer Open files without consistency check: Disabled
    2009-01-16 13:20:12.867 -0800 Information 116 J R’s Computer Server host name type: System
    2009-01-16 13:20:12.868 -0800 Information 613 J R’s Computer Maximum number of client connections configured in FileMaker Server: 250
    2009-01-16 13:20:12.869 -0800 Information 615 J R’s Computer Maximum number of Web Publishing Engine sessions configured in FileMaker Server : 100
    2009-01-16 13:20:12.940 -0800 Information 166 J R’s Computer Database cache size: 64 MB.
    2009-01-16 13:20:12.942 -0800 Information 608 J R’s Computer XDBC connections are not allowed.
    2009-01-16 13:20:12.961 -0800 Information 408 J R’s Computer FileMaker Database Engine started.
    2009-01-16 13:20:15.438 -0800 Information 486 J R’s Computer FileMaker Server started.
    2009-01-16 13:20:15.526 -0800 Information 418 J R’s Computer Opening database "FMServer_Sample"...
    2009-01-16 13:20:16.961 -0800 Information 184 J R’s Computer Opened database "FMServer_Sample".
    2009-01-16 13:20:57.630 -0800 Information 518 J R’s Computer Administrator connected: "fmsadmin" (192.168.1.88).
    2009-01-16 15:15:32.269 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 15:15:32.808 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 15:15:32.904 -0800 Information 410 J R’s Computer Stopping FileMaker Database Engine...
    2009-01-16 15:15:32.905 -0800 Information 140 J R’s Computer Closing database "FMServer_Sample"...
    2009-01-16 15:15:32.906 -0800 Information 168 J R’s Computer Database "FMServer_Sample" closed.
    2009-01-16 15:15:33.258 -0800 Information 412 J R’s Computer FileMaker Database Engine stopped.
    2009-01-16 15:15:33.272 -0800 Information 490 J R’s Computer FileMaker Server stopped.
    2009-01-16 15:17:07.306 -0800 Information 162 J R’s Computer Starting FileMaker Server 9.0v1 (06-18-2007)...
    2009-01-16 15:17:07.361 -0800 Information 657 J R’s Computer Client access logging disabled.
    2009-01-16 15:17:07.405 -0800 Information 178 J R’s Computer Maximum size of log file: 40 MB
    2009-01-16 15:17:07.406 -0800 Information 658 J R’s Computer Email notification to administrators: None
    2009-01-16 15:17:07.417 -0800 Information 174 J R’s Computer Statistics logging disabled.
    2009-01-16 15:17:07.521 -0800 Information 606 J R’s Computer Default database location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Databases/
    2009-01-16 15:17:07.540 -0800 Information 622 J R’s Computer Additional database folder: Disabled
    2009-01-16 15:17:07.563 -0800 Information 620 J R’s Computer Runtime Solutions custom database extensions: Disabled
    2009-01-16 15:17:07.862 -0800 Information 434 J R’s Computer Default backup location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Backups/
    2009-01-16 15:17:07.863 -0800 Information 602 J R’s Computer Administrator authentication method: Require no password
    2009-01-16 15:17:07.935 -0800 Information 498 J R’s Computer Secure (SSL) Network Encryption: Disabled
    2009-01-16 15:17:07.979 -0800 Information 614 J R’s Computer Maximum number of client connections permitted by FileMaker Server License: 250
    2009-01-16 15:17:08.002 -0800 Information 616 J R’s Computer Maximum number of Web Publishing Engine sessions permitted by FileMaker Server License : 100
    2009-01-16 15:17:08.027 -0800 Information 677 J R’s Computer XDBC connections are allowed by this FileMaker Server license.
    2009-01-16 15:17:08.069 -0800 Information 679 J R’s Computer IWP connections are allowed by this FileMaker Server license.
    2009-01-16 15:17:08.095 -0800 Information 74 J R’s Computer Maximum number of files to host: 50
    2009-01-16 15:17:08.129 -0800 Information 112 J R’s Computer The cache will flush every 1 minutes.
    2009-01-16 15:17:08.157 -0800 Information 466 J R’s Computer File list filtering: Disabled
    2009-01-16 15:17:08.159 -0800 Information 500 J R’s Computer Client authentication method: FileMaker accounts only
    2009-01-16 15:17:08.160 -0800 Information 596 J R’s Computer Disconnect idle clients disabled.
    2009-01-16 15:17:08.161 -0800 Information 492 J R’s Computer Sample statistics every 15 seconds.
    2009-01-16 15:17:08.162 -0800 Information 532 J R’s Computer Automatic updates disabled.
    2009-01-16 15:17:08.164 -0800 Information 472 J R’s Computer Server scheduling enabled.
    2009-01-16 15:17:08.165 -0800 Information 406 J R’s Computer Starting FileMaker Database Engine...
    2009-01-16 15:17:08.827 -0800 Information 637 J R’s Computer Open files without consistency check: Disabled
    2009-01-16 15:17:08.830 -0800 Information 116 J R’s Computer Server host name type: System
    2009-01-16 15:17:08.860 -0800 Information 613 J R’s Computer Maximum number of client connections configured in FileMaker Server: 250
    2009-01-16 15:17:08.869 -0800 Information 615 J R’s Computer Maximum number of Web Publishing Engine sessions configured in FileMaker Server : 100
    2009-01-16 15:17:09.138 -0800 Information 166 J R’s Computer Database cache size: 64 MB.
    2009-01-16 15:17:09.141 -0800 Information 608 J R’s Computer XDBC connections are not allowed.
    2009-01-16 15:17:09.168 -0800 Information 408 J R’s Computer FileMaker Database Engine started.
    2009-01-16 15:17:12.485 -0800 Information 486 J R’s Computer FileMaker Server started.
    2009-01-16 15:17:12.581 -0800 Information 418 J R’s Computer Opening database "FMServer_Sample"...
    2009-01-16 15:17:13.984 -0800 Information 184 J R’s Computer Opened database "FMServer_Sample".
    2009-01-16 15:17:42.162 -0800 Information 518 J R’s Computer Administrator connected: "fmsadmin" (192.168.1.88).
    2009-01-16 16:40:28.956 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 16:40:29.160 -0800 Information 488 J R’s Computer Stopping FileMaker Server...
    2009-01-16 16:40:29.207 -0800 Information 410 J R’s Computer Stopping FileMaker Database Engine...
    2009-01-16 16:40:29.475 -0800 Information 140 J R’s Computer Closing database "FMServer_Sample"...
    2009-01-16 16:40:29.536 -0800 Information 168 J R’s Computer Database "FMServer_Sample" closed.
    2009-01-16 16:40:29.955 -0800 Information 520 J R’s Computer Administrator disconnected: "fmsadmin" (192.168.1.88).
    2009-01-16 16:40:30.410 -0800 Information 412 J R’s Computer FileMaker Database Engine stopped.
    2009-01-16 16:40:30.431 -0800 Information 490 J R’s Computer FileMaker Server stopped.
    2009-01-16 16:41:31.615 -0800 Information 162 J R’s Computer Starting FileMaker Server 9.0v1 (06-18-2007)...
    2009-01-16 16:41:31.629 -0800 Information 657 J R’s Computer Client access logging disabled.
    2009-01-16 16:41:31.630 -0800 Information 178 J R’s Computer Maximum size of log file: 40 MB
    2009-01-16 16:41:31.632 -0800 Information 658 J R’s Computer Email notification to administrators: None
    2009-01-16 16:41:31.636 -0800 Information 174 J R’s Computer Statistics logging disabled.
    2009-01-16 16:41:31.659 -0800 Information 606 J R’s Computer Default database location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Databases/
    2009-01-16 16:41:31.660 -0800 Information 622 J R’s Computer Additional database folder: Disabled
    2009-01-16 16:41:31.662 -0800 Information 620 J R’s Computer Runtime Solutions custom database extensions: Disabled
    2009-01-16 16:41:31.670 -0800 Information 434 J R’s Computer Default backup location: filemac:/Macintosh HD/Library/FileMaker Server/Data/Backups/
    2009-01-16 16:41:31.673 -0800 Information 602 J R’s Computer Administrator authentication method: Require no password
    2009-01-16 16:41:31.674 -0800 Information 498 J R’s Computer Secure (SSL) Network Encryption: Disabled
    2009-01-16 16:41:31.702 -0800 Information 614 J R’s Computer Maximum number of client connections permitted by FileMaker Server License: 250
    2009-01-16 16:41:31.704 -0800 Information 616 J R’s Computer Maximum number of Web Publishing Engine sessions permitted by FileMaker Server License : 100
    2009-01-16 16:41:31.706 -0800 Information 677 J R’s Computer XDBC connections are allowed by this FileMaker Server license.
    2009-01-16 16:41:31.707 -0800 Information 679 J R’s Computer IWP connections are allowed by this FileMaker Server license.
    2009-01-16 16:41:31.710 -0800 Information 74 J R’s Computer Maximum number of files to host: 50
    2009-01-16 16:41:31.711 -0800 Information 112 J R’s Computer The cache will flush every 1 minutes.
    2009-01-16 16:41:31.713 -0800 Information 466 J R’s Computer File list filtering: Disabled
    2009-01-16 16:41:31.714 -0800 Information 500 J R’s Computer Client authentication method: FileMaker accounts only
    2009-01-16 16:41:31.716 -0800 Information 596 J R’s Computer Disconnect idle clients disabled.
    2009-01-16 16:41:31.717 -0800 Information 492 J R’s Computer Sample statistics every 15 seconds.
    2009-01-16 16:41:31.718 -0800 Information 532 J R’s Computer Automatic updates disabled.
    2009-01-16 16:41:31.752 -0800 Information 406 J R’s Computer Starting FileMaker Database Engine...
    2009-01-16 16:41:31.905 -0800 Information 637 J R’s Computer Open files without consistency check: Disabled
    2009-01-16 16:41:31.906 -0800 Information 116 J R’s Computer Server host name type: System
    2009-01-16 16:41:31.908 -0800 Information 613 J R’s Computer Maximum number of client connections configured in FileMaker Server: 250
    2009-01-16 16:41:31.910 -0800 Information 615 J R’s Computer Maximum number of Web Publishing Engine sessions configured in FileMaker Server : 100
    2009-01-16 16:41:31.924 -0800 Information 472 J R’s Computer Server scheduling enabled.
    2009-01-16 16:41:32.081 -0800 Information 166 J R’s Computer Database cache size: 64 MB.
    2009-01-16 16:41:32.082 -0800 Information 608 J R’s Computer XDBC connections are not allowed.
    2009-01-16 16:41:32.102 -0800 Information 408 J R’s Computer FileMaker Database Engine started.
    2009-01-16 16:41:35.497 -0800 Information 486 J R’s Computer FileMaker Server started.
    2009-01-16 16:41:35.557 -0800 Information 418 J R’s Computer Opening database "FMServer_Sample"...
    2009-01-16 16:41:36.156 -0800 Information 184 J R’s Computer Opened database "FMServer_Sample".
    2009-01-16 16:41:55.664 -0800 Information 518 J R’s Computer Administrator connected: "fmsadmin"
    I reinstalled it so it should have wiped out the other settings. I also uninstalled FM Server Advanced. If it is uninstalled theoretically Personal WEb SErving should be okay. I don't think Personal WEb sharing was affected by the Fm SErver install. it has separate php config files.

  • Pixelpost and Personal Web Sharing in Tiger

    Dear Friends:
    I figured out how to install Pixelpost (for a photoblog) in my OS X Tiger system -- by using MAMP. I changed the Document Root in MAMP so that now it looks to the Personal Web Sharing folder in the Mac (the Sites folder in the /usr/ space). The installation of Pixelpost works fine, letting me add images, manage it, etc. However, when I type in the computer address ("personal website") as provided in the Sharing tab under system preferences, it does not bring me at all to the photoblog. For instance:
    http://my.computer.address/ (just brings me to the regular Apache Server notice that it is running)
    if I type this:
    http://my.computer.address/~username/
    It brings me to the generic OS X page in place. But when I type:
    http://my.computer.address/~username/pixelpost/
    it opens to the pixelpost directory which I placed in the Sites folder. What I'd like to do is figure out what address will call up this blog so that others can access it.
    The blog comes up fine under this URL:
    http://localhost:8888/pixelpost/
    But that's not a proper address for external viewing. So, what address should I provide others? I've tried various configurations with the address provided in the Sharing tab of System Preferences, but no luck so far.
    Thanks!
    N

    I changed the Document Root in MAMP so that now it looks to the Personal Web Sharing folder in the Mac (the Sites folder in the /usr/ space
    I think you mean /Users/ space. /usr is something completely different.
    http://my.computer.address/ (just brings me to the regular Apache Server notice that it is running)
    Then it means you didn't change the DocumentRoot like you think you did. If you did, and assuming you restarted Apache after changing the DocumentRoot, then this URL would point to whatever directory you specified (/Users/whoever/Sites) and not /Library/WebServer/Documents.
    But [http://localhost:8888/pixelpost> is not a proper address for external viewing.
    but it can be. If all you're using this for is PixelPost then just setup the port forwarding on your router to forward to port 8888 rather than port 80 and you're done.
    Now, that said, the fact that you're using two different ports here (port 80 and port 8888) means that, at the very least, you are running two virtual hosts, or quite possibly two completely separate Apache instances.
    That could explain why changing the DocumentRoot doesn't help. You may have changed either the PixelPost VirtualHost configuration, or the MAMP-specific server configuration, but that's not the server/virtualhost you're talking to on port 80.
    I've never used MAMP, so I don't know how it installs, but it wouldn't surprise me to find that it installs a whole new Apache distribution and you'd need to find that server and its configuration files to fix the DocumentRoot problem, if that's the way you want to go.
    You can also fix it via a simple Alias in the standard Apache configuration - just alias /pixelpost to /Users/whoever/sites/pixelpost - that way users who hit /pixelpost on your server will get the User-specific directory, while all other URLs continue to be served via /Library/WebServer/Documents. This might improve security and avoid the possibility of leaking other content from your home directory that you don't want to make available.

  • PERSONAL WEB SHARING - ANYONE HELP!!!

    My goal is to setup personal web sharing for my mac mini. My intent was to check out my web page design from the internet (just because I could), but now it's changed to wanting to prove that I can conquer this (for my own pride).
    Here's my setup: Cable internet (Cox Communications), Airport Express, Mac Mini.
    I have put the web page into the /library/webserver/documents folder. I have forwarded port 80 on my router to my local IP address. I don't have my firewall up at this point.
    The scenario is as follows: I can access my webpage using my public IP address only on my local area network. If I go to work, I cannot access the page. If I go to my friend's house, I cannot access my page.
    I've read countless forums in search of an answer to this dilema. I have talked to Cox about blocking port 80 (which they don't). I have now spent the better part of the day talking to Apple about this problem. They concluded that I was smart enough to set up everything correctly, but were just as stumped as I was in trying to solve the problem.
    So, they directed me to this forum. If anyone has any ideas on how to fix this problem, I'm all ears. I'm willing to try pretty much anything to get this to work (my pride depends on it).

    I know it may seem like this issue has been answered, but this forum seems to be the closest place for me to report on my very similar situation and see if there is a solution, if not the same one offered by Charlie, above, perhaps some other insight into the nature of this problem, and its resolution.
    BACKGROUND and OBJECTIVE:
    Like MacDaddy, I am trying to set up a personal web sharer on my iMac G5. I started out yesterday with the goal of setting up an FTP server, because I want others to be able to download very large video files (500 MB to 2 GB). I subscribed to .Mac and I tried this on an iDisk, but I soon learned that the upload times were so "painfully slow," as others have also reported, that I decided to try to let people grab the files directly from my own hard disk. In theory, the Mac is equipped to allow this to occur, right?
    I couldn't get the FTP server setup to work, because access was denied, so I decided to shift my effort to creating a personal web server and create pages to files that could be downloaded.
    SET-UP:
    I use Adelphia Communications as my Internet Service Provider, and I get a dynamic Internet address, which has not changed since I began this process and which, says Adelphia tech support, is not designed to change until and unless I disconnect from their system. I have a small home network, hard-wired and connected through LinkSys BESFR41 router. I created a test home page with a couple of links; the web pages are located in the default ~username/Sites folder.
    I know the difference between the 192.168.x.x addresses generated by the router to identify the computers on the network from the 24.49.xxx.xx IP address provided by Adelphia. I learned how to do the port forwarding for the router so that the iMac, which is identified as 192.168.1.102 on the network, should get the HTTP incoming traffic on port 80.
    Here is a web page containing links to the screen captures that will illustrate what I've selected in regards to:
    • Sharing Preference
    • Firewall Preferences
    • Router status setup
    • Router Port Forwarding setup
    http://home.adelphia.net/~jmbattaglia/personalwebsharer/index.html
    Also, I understand that the correct format for the URL to be given to my friends goes like this:
    http://[IP_address]/~short name of user's account]/
    So, this is how I have used it in my situation:
    http://24.49.xxx.xx/~JohnMichaeliMacG5/
    Also, I've learned that, for one computer on the network to bring up the personal web server pages in its browser, I should use this format:
    http://192.168.1.102/~JohnMichaeliMacG5/
    where, as I mentioned, the iMac G5 has been assigned the internal network address of 192.168.1.102.
    I think I've got everything right, but I'm willing to be corrected in order to get this thing to work properly.
    RESULTS:
    Like MacDaddy reported, I can successfully access my test web page internally on my private home network. This means that I can access the web page on the iMac G5 when I key in either the 192.168.1.102 format, or when I use the 24.49.xxx.xx format, in a web browser on my PowerMac G4.
    Similarly, I can access my test web page when I use the 24.49.xxx.xx format in a web browser on my iMac G5 itself.
    However, no one else from the outside world can see my pages! That's the problem which MacDaddy reported, and that's the mystery I cannot understand.
    Spurred by the insights of this forum, I contacted Adelphia and I asked them if the HTTP port (80) and the FTP port (21) was blocked. The tech support insisted with absolute certainty that those ports were open and that all ports (up to a very high number) were open. I pushed him hard on it, and he consulted an internal Adelphia document which listed the closed ports, and the ones I am interested in were not closed.
    He referred me to Apple, which wanted me to either to upgrade my service warranty contract, or pay $49 to ask a question that they would not guarantee they could answer. I passed on that option, and decided to post my question here, where there may be some resolution on a problem that may be preventing many of us from realizing the full potential of our machines.
    SOLUTIONS:
    I have not tried to implement the solution that Charlie offered to MacDaddy, which apparently made him a happy camper , because I have no reason to doubt the Adelphia tech support person who resolutely assured me that port 80 is not blocked. If no one can offer any alternative insight into this problem, then perhaps I will have to try Charlie's suggestion out.
    But I just thought I'd post my situation, in case someone else can explain what the heck is going on here and suggest an easier fix. It is unfortunate that something which should have taken a few clicks of the mouse to set up has turned out to be a complicated technical adventure over a twisting, winded path lasting over two days, but that's what's happened. Can anybody straighten this path out? Thanks.
    jmb
    PowerMac G4 Mirrored Doors. iMac G5.   Mac OS X (10.4.6)   2 GB RAM. 2 hard drives. SuperDrive; ComboDrive. LaCie FW DVD. LaCie FW 250GB.

  • Is there an FAQ or step by step tutorial for personal web sharing?

    First off, if anyone knows of an FAQ somewhere that answers this question, post me the link.
    Am trying to build a comon web page for synching iCal on a stans alone machine and am sure this is a very common question from new iCal users like myself:
    Situation:
    -Multiple users on same iMac
    -Different accounts Mom, Dad, Kids, Nanny
    -Need to collaborate schedules
    Want to create a webpage on my machine (without .mac) where we can publish calendars.
    Tried turning on personal web sharing in the system preferences but the addresses listed only show a page listed as "Access Forbidden."
    Is there a step by step tutorial out there? I could really use one.

    Thanks to all for replying. The information posted was very informative and answered my questions asked.
    I guess the real answer for me the very novice and deliberatly blissfull user is: No.
    I switched to Mac after assembling my own PCs to try and get then to do what I wanted. The driver/dll/ini issues were maddening!!!
    Am not tech-phobic, but am loathe to start working in the terminal and with code since I know so little and it was that commercial that said "I got tired of being my own tech dept." that made me switch.
    Looked at the tutorials and there are always comments underneath with comments about how there is a typo here, mispelling, there, better code over yander etc. linux/apache/unit/windows flame wars etc.
    All I want it to do is work or not. Since it is not; will find another way.
    Between purusing sites I think I came up with a simple low tech solution.
    In the shared folder create an iCal_Shared folder. From one user export a calendar complete with a date. For example Dad's work as of 15 JAN. Then in the duaghter's calendar import the same calendar. Knowing that as changes are made by me, I will have to update the exported file, and my daughter will have to be aware of the as of dates.
    A lot of solutions out there are for the corporate world. Am happy to Apple gaining market share but I am on a stand alone machine.
    The iPhoto manager is a great product from a third party and was happy to pay for it. Saves me a lot of time with 20K+ pictures.
    Just want an app causing iCal to behave simply, ie my daughter and I could share calendar information on our machine without running WebDAV server, a three tiered digital satelite hookup, etc,
    Pie Argh Squarred..It seems to me that Apple woule be better off if they came up with solutions like that that cost $20 since they would reach a lot more people than they are now with the $100 annual .mac extortion fee.
    Kudos to those of you who are much smarter and braver than I and again I thank you for your posts as they have opened my eyes as to just how old I am getting! Perhaps my daughter should solve this one for me!

  • PERSONAL WEB SHARING ON iMAC G5 WILL NOT START

    hello:
    i am hoping someone would be able to help me on this issue. i attempted to start the Personal Web Sharing service on my computer (iMAC G5 with MAC OS 10.4) from System Preferences > Sharing. however, after i highlight Personal Web Sharing on the list of services and click the Start button, the message changes to "web sharing starting up..." and simply remains that way (i've waited for a long time). it does not change to "web sharing on".
    am i doing something wrong? is it possible that my Apache installation has been compromised? my goal is to be able to use my computer to create and run .php web pages.
    any help / suggestions are greatly appreciated
    iMac G5   Mac OS X (10.4.8)  

    Sorry, this still doesn't seem to be working.
    Actually, it's me steering you wrong. It's been a while since I fooled around with the Entropy PHP installation and it looks like he's changed it.
    He used to put the configuration stuff for PHP at the bottom of the main Apache config file, but now he's putting it in that separate file in the httpd users directory. That's why moving the default Apache configuration file into place didn't help.
    You have two choices: one is to just forget about the PHP5 stuff for now and go with Apple's default PHP install. The other is to try to get PHP5 up and running.
    The first option is very easy: just run this command:
    <pre class="command">mv private/etc/httpd/users/+entropy-php.conf ~/Desktop</pre>That will put the offending file on the desktop. Now try starting the web server. Most likely, PHP won't work yet, but Apache should start. In order to use the default PHP5, you need to make some changes to the httpd.conf file. You can use pico in the Terminal. It's pretty simple and the key commands are printed at the bottom. Where you see the up arrow listed, that means to use the "control" key, i.e., "control"-x to exit. You need to use sudo, though so you have root privileges:
    <pre class="command">sudo pico /etc/httpd/httpd.conf</pre>Search ("control"-w) for "php". The first line you'll see is this:
    <pre class="command">#LoadModule php4_module libexec/httpd/libphp4.so</pre>Uncomment it by removing the "#" from the start of the line. Search again until you find this line:
    <pre>#AddModule mod_php4.c</pre>Again, remove the "#". Now search again until you find these lines:
    <pre class="command"><IfModule mod_php4.c>
    # If php is turned on, we repsect .php and .phps files.
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php-source .phps
    # Since most users will want index.php to work we
    # also automatically enable index.php
    <IfModule mod_dir.c>
    DirectoryIndex index.html index.php
    </IfModule>
    </IfModule></pre>Just verify that they look like these. If they don't, copy and paste your corresponding lines into a reply. Now stop and restart the web server and see if PHP pages will work. You should be using OS X's built-in 4.x version.
    If, on the other hand, you'd rather use the Entropy PHP5 installation, post back and tell me and we'll see if we can figure out what's up with that...
    charlie

  • Unable to start up Personal Web Sharing (OS X 10.3.9)

    I have been trying to start up Personal Web Sharing since yesterday. It keeps saying "Web Sharing starting up...", but nothing ever happens.
    Actually, what I want to do is to set up a test server environment (not a real server for everyone on the web to access) to learn PHP, MySQL and XOOPS. I bought Teach Yourself PHP, MySQL and Apache by Julie C. Meloni (Sams Publishing) and installed MySQL 5.0.22 and PHP 5.1.4 following the instructions on the book. But I was not able to see anything when I entered http://localhost/phpinfo.php on FireFox. (The book tells me to create a simple script called phpinfo.php and save it to /Library/WebServer/Documents.)
    I thought the problem might be that I didn't have Personal Web Sharing on, so I went to System Preferences' Sharing panel to start it up. But it just hangs in starting mode... never starts...
    I tried Charles's suggestion to Harvey ( http://discussions.apple.com/thread.jspa?messageID=680762&#680762 ). The /usr/sbin/apachectl configtest command returns the following result:
    Processing config directory: /private/etc/httpd/users/*.conf
    Processing config file: /private/etc/httpd/users/+entropy-php.conf
    Syntax error on line 8 of /private/etc/httpd/users/+entropy-php.conf:
    Cannot load /usr/local/php5/libphp5.so into server: (reason unknown)
    I'm wondering if PHP 5.x does not support Panther, but php.net doesn't seem to say so... (I downloaded PHP 4.4.4, but haven't figured out how to use it to replace PHP 5.1.4...) Or maybe it's because I'm connecting to the web via an open network (at a cafe)?
    Any suggestions will be much appreciated!
    powerbook g3 firewire   Mac OS X (10.3.9)   XLR8 G4 upgraded

    Thank you~ FifthWheel & Karl~!
    Even if you're on an open network, or on no network at all,
    Apache should start if it is properly configured (even with
    no network, the loopback address 'localhost' is still available).
    Thank you for the answer! This has been very confusing to me!
    I still haven't been able to find out whether PHP 5.1.4 is compatible with Panther's Apache or not (couldn't even find which version of Apache Panther has...) But a guy from another Mac forum (www.oikos.com.tw) seems to be very certain that Entropy's PHP 5.x package is not compatible with Panther. I guess I will just take what he said. I've already sent my complaint to Sams Publishing.
    I found "Building and Installing Apache 2.0.54 and PHP 5.0.4 on Mac OS X 10.3.8" on phpmac.com. But it seems quite risky for someone who does not have unix knowledge like me. So I guess what I should do is to find out how to remove the PHP 5.1.4 I installed and install PHP 4.x instead.
    Still seeking for a solution... I guess I should start learning Unix too...

  • Personal Web Sharing Works on One Mac, Not on Other

    I can't get Personal Web Sharing to work with my MacBook Pro. It does work with my iMac. Yes, I can turn it on just fine on the MacBook, by means of System Preferences->Sharing, but I can't successfully use the Personal Web http:// link I see there as a URL in my iMac's browser. When I try, it tells me it can't connect to the host, i.e., the MacBook. When I do the same in reverse, from my MacBook browser with my iMac as target (though the local IP address and the short-user-name are of course different), the connection works fine. 
    I don't think I'm using an incorrect local IP address to try to get to my MacBook. I've checked that. And I do have an index.html file in the appropriate Sites folder on each machine. 
    I'm using Mac OS Leopard 10.5.8 on both machines.
    The problem also shows up on Safari on my iPhone. It can access Personal Web Sharing on the iMac but it can't on the MacBook.  
    I wonder if it's a Bonjour problem? I don't exactly know if Bonjour is running on the MacBook, or how to tell if it is, or how to activate it if it isn't running.
    Or, if it's not Bonjour, what could it be?

    Doug,
    'sudo apachectl start' asked for my password and seemed to have no complaints after getting it. But it didn't tell me anything, and it didn't make a difference.
    After checking out some FAQs at
    http://httpd.apache.org/
    I tried 'apachectl -k start' and got:
    (13)Permission denied: make_sock: could not bind to address [::]:80
    (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
    no listening sockets available, shutting down
    Unable to open logs
    It made no difference whether Personal Web Sharing was on or off in System Preferences when I did that.
    I do know that the Apache log file is apparently not there where apachectl expects it. I don't understand the other stuff it said, but it looks like maybe it was trying to use an IP address of 0.0.0.0 instead of 10.0.1.16.
    10.0.1.16 is the local IP address of my MacBook.
    I tried 'apachectl configtest' and got 'Syntax OK'.
    I tried moving index.html to /Library/WebServer/Documents -- no help.
    I tried creating a new configuration file in the way you said to try -- no help.
    No matter what I try, I get:
    Unable to connect
    Firefox can't establish a connection to the server at 10.0.1.16.
    I'm beginning to wonder if the Apache environment might not need to be reinstalled. But I'm not sure how. I'm running Leopard 10.5.8, but the original install disk I have is 10.5.1. Software Update moved me up from that to 10.5.8 over time. Your further thoughts and advice will be greatly appreciated ...

  • Personal Web Sharing Questions

    I have started Personal Web Sharing in the Sharing System Preferences. I have used a PC off site and entered the address shown in the Preference window. I get an error window and cannot access the index.html file in the Sites folder.
    My computer is on the internet via a cable modem to Airport Express and access to Airport requires a password (Wep key).
    Does that have anything to do with the problem?
    What are the variables I might be overlooking?
    thanx

    I have quoted from an article by PChuck, I think he wrote it in very understandable terms.
    In general, only open ports when necessary. When an application, running on a client computer on your LAN, wants to communicate with a server outside the LAN, it sends a packet out. The NAT router does, in sequence:
    1. Open a port which points back to the client computer that sent the packet.
    2. Sends the packet to the distant computer, giving its IP address, and the port that was just opened.
    3. Waits for a return packet from the distant computer.
    4. Forwards the return packet from the distant computer to the client computer that started the whole thing.
    NAT is stateful. This is a reason why a NAT router is said to provide protection like a firewall, but it is not. The port that is opened, from the outgoing packet, only responds to the address of the distant server. Thus when a port is opened, only replies from the distant server will be returned to the client computer on the LAN. Packets from any other computer, to that port, simply get dropped by the NAT router.
    NAT, in its purest form, only supports client computers. Unless a client computer opens a port with an outgoing packet, no incoming traffic gets passed, by a NAT router, to any LAN computer.
    So how do you use a server (a computer that waits for unsolicited incoming packets) behind a NAT router? Before UPnP, you would use either port forwarding, or port triggering.
    • With Port Forwarding, you define fixed ports, to be forwarded to a fixed IP address. Those ports are opened when they are defined, and stay opened forever. The ports must be defined, and opened, before they are needed.
    • With Port Triggering, you define fixed ports, to be forwarded, when specific other ports are opened, by any application on any computer. Those ports are opened when triggered, and stay open forever. The ports must be defined before the triggered port is needed.
    • With UPnP, the UPnP capable application tells the router, precisely when needed, what ports are to be opened, and fowarded to what (potentially dynamic) IP address. And properly written UPnP applications will also tell the router when to close those ports.
    Many well meaning security experts see UPnP as a security risk. If you have uncontrolled applications running on your computer, they can control your router, have it open ports at will, and create security risks.
    If your computer has uncontrolled applications running on it, you've already lost that battle. You need to learn about how to get rid of any existing untrustable software, and then you need to learn about keeping any future untrustable software off your computer.
    UPnP is just as reliable, and as safe, as any applications running on your computer. If you control your computers properly, and ONLY trusted applications run on them, UPnP is perfectly safe. If you don't control your computers properly, applications hijacking UPnP to open holes in your router will be the least of your worries.
    UPnP is actually more secure when your computers can be trusted. UPnP, as I state above, will dynamically instruct the router to close specific ports when they are not needed. Port forwarding, and port triggering, leave ports open forever.
    The other advantage of UPnP is that it allows you to have servers on your LAN, using dynamic IP addressing. Port forwarding requires a server to have a fixed IP address. Port triggering, depending upon the NAT router, may or may not require a server to have a fixed IP address.
    • With port forwarding, or port triggering, you can have only a single computer on the LAN running a given server application. A pre defined port can be forwarded to only one server.
    • With UPnP forwarding, multiple computers can run the same UPnP compliant application, such as an IM program. The server application can negotiate with the router, as necessary, and have the port forwarded.
    Bottom line? A properly written UPnP capable application is more functional, and no less secure, than an equivalent non-UPnP capable application. On a LAN with a properly designed layered security strategy, it will not create a security risk.
    MacBook Pro 2.33 Ghz Intel Core 2 Duo   Mac OS X (10.4.9)   3 GB 667 Mhz 8R2205

Maybe you are looking for