Accessing shared HP laserjet 1018

Hello
is there anyway to access or use HP laserjet 1018 is there any support ?
thanks

Try this:
http://www.openprinting.org/printer/HP/HP-LaserJet_1018

Similar Messages

Sharing LaserJet 1018 from Vista host to XP users

I've been sharing my LaserJet 1018 on an XP desktop to several XP laptops for a long time, and it works flawlessly.
I've now bought a Vista 64 bit desktop, and wish to connect the 1018 to it and share it. (And get rid of the XP desktop). It all seems to work, but then problems arise:
Printing from a (corporate) XP Pro laptop, I get a message that my print spooler has stopped. I can't print to anything until I reboot the laptop.
From a (personal) XP Pro laptop, I can print sometimes but not others. I can run a test print, and mostly can print from Internet Explorer, but not from Excel. (!!!) When I can print, I don't get any feedback (such as, "you're out of paper").
From an XP Home laptop, I'm asked to reinstall the print drivers every time. And then I can't print - I forget the error.
I've connected each of the laptops to the printer directly (USB) and installed the drivers that way, and they all work flawlessly when directly connected. The Vista machine prints flawlessly, either directly to the printer or over the network to the old XP desktop. When the printer is connected to the old XP desktop everything works perfectly.
Also, another printer - an Epson Photo printer - connected to the Vista desktop and shared in exactly the same way works flawlessly.
I've downloaded the drivers appropriate to my operating systems from:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1814094&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20%C2%BB
Initially I didn't, but now I've also installed the "other OS" drivers onto the server - no apparent difference.
This is on a wireless home network. The printer is mapped via IP address and that seems just fine - same as the Epson.
Any suggestions? This feels like a buggy Vista driver to me.
Thanks,
Tim
Message Edited by TimM on 01-24-2009 03:36 PM
Message Edited by TimM on 01-24-2009 03:38 PM

I am having very similar challenge with Vista 64 home premium and laserjet 1020. The Vista 64 spooler file seems to have become corrupted, since the printer worked for several months with vista before the error messages and continues to work fine with my old computer running xp pro. HP chat sessions (14 hours) have been entertaining but unhelpful, and phone support insists that the spooler error is with the printer, which is more than 6 months old. I have rebooted, reinitialized the printer from Vista and dos, reloaded and reinstalled printer drivers. Did you get a fix for this?

LaserJet 1018 shared on Printer server doesn't print

Hi, I'm a multi HP owner (notebook, desktop a Photosmart printer and the LaserJet 1018)... I recently bought a Iomega NAS with the printer server service and I tried to share both of my HP printers on it. The PhotoSmart 7260 works perfectly, but the LaserJet 1018 does not: it says that it have a job pending but the print doesn't start. I've passed the same nightmare when I've tried to share the printer on the Desktop PC with Windows 7 Ultimate 64 bit: job pending but no printing unless I restart the PC... on startup the print stated. I've found the way to share it with Ubuntu Server 9.10 by installing HP linux driver.Now, having this nice NAS I would like to use it as my printer server (energy saving reasons).
I've read a lot of people with the same problem but havn't find the solution. Somebody even says that the 1018 is a low budget printer and is not enabled for sharing, but it sounds bull**bleep** to me (it prints under linux). Somebody knows if and how to solve this problem? My clients are both Win7 x64 (I have to test my Ubuntu 10.10 desktop)... should I install 32bit version drivers? ore something like that? Or should I buy a new printer (!HP)???
Thanks
Alessandro

If the printer is not postscript, and you are using 'generic' then the printer is likely not understanding what is being sent to it, so it is dumping the job.
HP printers default to HPs own page desription language called PCL (Printer Control Language).
If you did not install all the 'additional printers' when you installed your OS, might want to do so.
If not, check HPs site for Mac drivers, or check out GIMP & GhostScript from SourceForge.net to see if they support that particular printer

HP LaserJet 1018 freezes when trying to print from Homegroup user

1. I have recently upgraded the OS on my laptop cumputer to Windows 7 SP-1 Ultimate to make it compatible with my desktop.
2. I run a ethernet/wireless network and I have 3 printers attached to the network:
(a) an HP 1018 attached to my desktop and have no problems printing from it;
(b) A second HP 1018 attached to a printserver (Belkin Home Base Control Center (Software version 1.0.0. SKUPTP Driver 3.3.8.0). The Belkin Control Center is attached to my network wirelessly. I have no problem printinting through this printer from my desktop. Nor did I have problems printing through this printserver when my laptop was running Vista Ultimate SP3;
(c) a Photosmart all-in-one C7280 printer attached to my network wirelessly. I have no problem printing from this printer either from my desktop OR my laptop regardless of operating system.
3. When my laptop was running Windows Vista Ultimate and my desktop was on Windows 7, the laptop was able to print through my desktop to the USB HP LaserJet 1018 as well as the HP LaserJet attached to the Belkin Home Base Control Center. At no time has my laptop had problems printing to the HP Photosmart printer.
4.When I upgraded my laptop's OS to Windows 7 SP1 and joined both the desktop and the laptop through homegroup networking, however, I have experienced the following problems:
(a) When the laptop attempts to print through the USB-connected HP LAserJet attached to my desktop, the action is recognised by both computers i.e., one computer printer status indicates that the print job is spooling to the USB printer; the printer indicater on my desktop indicates that the printjob is printing. However, nothing gets printed and the job is suspended.
When I try to cancel the printjob, both print status indicators tells me that the file is being deleted. However, it remains in that state even after a restart of both my computers.
I am unable to cancel the job -and unable to print directly from my host desktop computer- until I physically delete the print device, turn off the printer and restart the computer.
(b) The Belkin Home Base Center on my laptop recognises that the second HP laserJet printer is attached to it and will indicate the fact and ask me if I want to load the print driver. When I indicate yes, the laptop attempts to load the driver, but hangs up while doing so. When I cancel the request and proceed to load the print driver on my laptop directly, the device appears as "Unspecified" rather than a printer on my device manager and I am unable to print from either my laptop or my desktop. Again, I need to delete the devices from both my desktop and laptop and restart just so that I can print from my desktop.
4. As indicated above, printing to and through my Photosmart C7280 wireless printer is fine whether I try from my desktop or laptop. Also, I am able to use my Cannon LiDe 500F scanner, that is also attached to the Belkin Home Base Center from both the desktop and laptop.
SUMMARY:
1. HP LaserJet 1018 printers can be shared between a desktop running Windows 7 SP1 Ultimate and a laptop running Vista SP3 Ultimate on a local network.
2. The Windows 7 desktop and the Vista laptop can both share an HP 1018 printer attached to a Belkin Home Base Center printserver
3. When the laptop is upgraded to Windows 7 Ultimate and joined to the desktop through Homegroup networking, the laptop can no longer print through the HP1018 printer attached to the desktop, and any attempts to do so will freeze the printer so that not even the desktop can use it unless the device is removed and restarted on the desktop.
4. Both the desktop and laptop computers can communicate with the Belkin Home Base Center printserver and activate a Cannon scanner also attached to this printserver. The desktop can also print through a second HP 1018 printer attached to this printserver. However, when the laptop attempts to print through the printserver, the print job freezes on both the desktop and laptop computers.
5. Regardless of operating system or method of being networked, both the desktop and the laptop are able to print through a Photosmart C7280 printer.
What appears to be the incompatibility between HP LaserJet 1018 printers and Homegroup networking, and how can it be resolved?

Hello computerdude100, welcome to the forums
I read through your post about the issues you have been having since changing your router to the Linksys WRT1900AC. From how you are describing it, the printer itself seems okay without the new router, as your previous router setup worked fine and a the local connection to your computer works fine. The hardware is proving out to be okay.
I do recommend contacting Linksys to see if they can configure the settings for you as it is not communicating with the printer.
Linksys Support
Good luck, thank you for posting in the community!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Shared HP laserjet P1005 inaccessible over WAN

Good day to all the peeps here, I'm a newbie and I am having problems with my hp printer. I can't access or add my Shared hp laserjet p1005 on my home network thru WAN? Please i need help about this! Is there a network configuration that i should do? I have another printer that is also shared and i can access it thru WAN, but the HP laserjet P1005 is inaccessible... Can anyone help me with this? Thanks in advance...

Thanks for the reply Sir Shane_R, and im so sorry to give you quite of the details about the problem. Here are the details:
We are using 3 HP laserjet P1005 in 3 different Remote locations (3 different cities here in Saudi Arabia).
All 3 of these locations have different (workgroup names) namely Rumailah, Compuh, and MCTEK.
Rumailah workgroup has 2 computers, and 2 shared printers which are an epson LQ-680 Dot matrix printer and an HP Laserjet P1005 connected on a Dell PC which has Windows XP Professional SP3 installed on it . The other PC has Windows 7 OS and it can print from the shared printer in this network locally.
Second location is Compuh workgroup and has an HP laser P1005 which is shared on a 4 node network. 1 Server 2003, and 3 Windows XP. Printing locally has no problem.
Third location is MCTEK has an HP laserjet P1005 also directly connected to a PC which has a Windows 7 OS installed and it is also shared.
FIrewalls are turned off.
We're using Remote Desktop Protcol on these network to communicate which each of these computers. We are also using a database software which is installed only on the Server in (Compuh) workgroup. My problem is I can't install or add these HP laserjet printers from any pc on any of these workgroups thru RDP on the Server (adding printers on the server using RDP session). Adding and printing from (Rumailah), using the RDP session and the Database software from the server (Compuh) with the Epson LQ-680 didn't have problems.

Sharing HP LaserJet 200d on Windows 7 to XP machine

I need help sharing my LaserJet 220d running on Windows 7 with another computer running XP.
The HP LaserJet was originally installed on the XP 32 bit machine and it ran fine. I bought a new computer with Windows 7, 64 bit and Windows automatically installed the software for the printer and it works fine on Windows 7.
I have printer sharing turned on and the XP machine CAN find the HP printer across the network.
In reading the HP web support on this topic I did try to configure the HP LaserJet for both 64 bit and 32 bit (x86) drivers. However, when I follow through the step outlined on this page -
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02030517
I run into a problem in locating the proper driver. I keep getting an error message saying that I do not have the correct file.
I tried all HP 2200 PCL 5 drivers that I could find on this link, including the universal driver -
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=28862&pr...
but non of them worked. I kept getting the message that I do not have the correct driver. The exact error message is "The requested location does not contain the driver for the HP LaserJet 2200 Series PCL 5 for the requested processor architecture.
What driver do I need to install on my windows 7 machine in order to allow the HP 2200d PCL 5 printer to be shared with my 32 bit XP machine and where do I find it?
Thanks very much,
Dan

HP seems pretty damned indifferent to its customers' problems. I have about the same problem. My computer has Windows 7 SP1 x64, with a LaserJet 2200D connected via USB. I have been trying to share it with another computer, which is running Windows XP SP3 x86, on home network.
I am able to use the printer from my computer, but not from the XP machine. I've tried to download "additional drivers" for the client machine, but keep getting messages "no driver found" after unzipping. Also have tried installing drivers on the other computer, again to the same messages there.
I've had the printer working on both computers before, but only after hours of fiddling around with different drivers on both machines and then, only by luck it seems, did it work. Can't seem to get it work this time around.
I usually reinstall Windows (win7) about once a year, and really do not want to have to go through this problem yet again next year. I want to fix this problem now.

Sharing HP LaserJet 2200d on Windows 7 to XP machine

I need help sharing my LaserJet 2200d running on Windows 7 with another computer running XP. The HP LaserJet was originally installed on the XP 32 bit machine and it ran fine. I bought a new computer with Windows 7, 64 bit and Windows automatically installed the software for the printer and it works fine on Windows 7. I have printer sharing turned on and the XP machine CAN find the HP printer across the network. In reading the HP web support on this topic I did try to configure the HP LaserJet for both 64 bit and 32 bit (x86) drivers. However, when I follow through the step outlined on this page - http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02030517 I run into a problem in locating the proper driver. I keep getting an error message saying that I do not have the correct file. I tried all HP 2200 PCL 5 drivers that I could find on this link, including the universal driver - http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=28862&pr... but non of them worked. I kept getting the message that I do not have the correct driver. The exact error message is "The requested location does not contain the driver for the HP LaserJet 2200 Series PCL 5 for the requested processor architecture. What driver do I need to install on my windows 7 machine in order to allow the HP 2200d PCL 5 printer to be shared with my 32 bit XP machine and where do I find it? Thanks very much, Dan

HP seems pretty damned indifferent to its customers' problems. I have about the same problem. My computer has Windows 7 SP1 x64, with a LaserJet 2200D connected via USB. I have been trying to share it with another computer, which is running Windows XP SP3 x86, on home network.
I am able to use the printer from my computer, but not from the XP machine. I've tried to download "additional drivers" for the client machine, but keep getting messages "no driver found" after unzipping. Also have tried installing drivers on the other computer, again to the same messages there.
I've had the printer working on both computers before, but only after hours of fiddling around with different drivers on both machines and then, only by luck it seems, did it work. Can't seem to get it work this time around.
I usually reinstall Windows (win7) about once a year, and really do not want to have to go through this problem yet again next year. I want to fix this problem now.

Computer not responding anymore when accessing shared files (systemd)

Hi,
i upgraded my arch system which now uses systemd. An error appears when trying to access shared from vmware. It results in an no more responding arch Linux.
Mounting is done via
mount -t vmhgfs .host:/ /mnt/hgfs/
which gives the note that
Could not add entry to mtab, continuing"
I could afterwards continue. When changing to the directory e.g. trying do list the files the computer stops responding.
dmesg
gives the following errors..
[ 323.160271] BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
[ 323.160280] IP: [<ffffffffa02a6986>] HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 323.160289] PGD 25baf067 PUD 259c4067 PMD 0
[ 323.160292] Oops: 0000 [#1] PREEMPT SMP
[ 323.160295] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
[ 323.160334] CPU 0
[ 323.160339] Pid: 811, comm: ls Tainted: G O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 323.160341] RIP: 0010:[<ffffffffa02a6986>] [<ffffffffa02a6986>] HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 323.160345] RSP: 0018:ffff880025abbc68 EFLAGS: 00010202
[ 323.160347] RAX: ffffffffa02aa280 RBX: ffff88002c05a480 RCX: 0000000000000010
[ 323.160348] RDX: ffff88002c05a480 RSI: 0000000000000040 RDI: ffff88002c05a480
[ 323.160349] RBP: ffff880025abbc78 R08: 6f6c474458007471 R09: ffff880025abbde8
[ 323.160350] R10: ffff88003c4c400a R11: 0000000000000002 R12: ffff880025abbd30
[ 323.160352] R13: 0000000000000000 R14: ffff880025abbdd8 R15: ffff880025abbd38
[ 323.160353] FS: 00007f5f0bd6c700(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 323.160355] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 323.160356] CR2: 0000000000000078 CR3: 0000000025a9c000 CR4: 00000000000007f0
[ 323.160484] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 323.160506] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 323.160508] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 323.160509] Stack:
[ 323.160511] ffff880025abbdd8 ffff88002c207bc0 ffff880025abbce8 ffffffff8118b285
[ 323.160514] ffff880025a42420 ffff880025a42420 0000000200007471 ffff88002c05a480
[ 323.160517] ffff880025a27048 000000022994b100 ffff880000000028 0000000000000000
[ 323.160519] Call Trace:
[ 323.160531] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 323.160534] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 323.160538] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 323.160541] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 323.160543] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 323.160546] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 323.160551] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 323.160554] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 323.160557] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 323.160560] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 323.160563] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 323.160565] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 323.160568] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 323.160575] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 323.160579] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 323.160580] Code: 38 e8 e0 84 c0 75 9e eb 98 66 2e 0f 1f 84 00 00 00 00 00 66 90 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 85 f6 48 89 fb 74 06 <f6> 46 38 40 75 54 48 89 df e8 4c b7 ff ff 85 c0 ba 01 00 00 00
[ 323.160604] RIP [<ffffffffa02a6986>] HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 323.160609] RSP <ffff880025abbc68>
[ 323.160610] CR2: 0000000000000078
[ 323.160615] ---[ end trace 658c53aa01f4c121 ]---
[ 323.160618] note: ls[811] exited with preempt_count 1
[ 348.089297] BUG: soft lockup - CPU#0 stuck for 23s! [ls:811]
[ 348.089303] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
[ 348.089359] CPU 0
[ 348.089375] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 348.089378] RIP: 0010:[<ffffffff81082552>] [<ffffffff81082552>] lg_local_lock+0x42/0x50
[ 348.089390] RSP: 0018:ffff880025abb858 EFLAGS: 00000297
[ 348.089392] RAX: 000000000000009e RBX: ffffffff81274859 RCX: 000000000000009f
[ 348.089393] RDX: ffff88003f610b90 RSI: ffffffff8119c0f0 RDI: ffffffff8184eec0
[ 348.089394] RBP: ffff880025abb858 R08: 00000000802e002c R09: ffff880025abbfd8
[ 348.089395] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002994b160
[ 348.089397] R13: 0000000000000000 R14: ffff880025adaf20 R15: ffff880025abb7c8
[ 348.089399] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 348.089400] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 348.089401] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
[ 348.089481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 348.089503] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 348.089505] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 348.089506] Stack:
[ 348.089508] ffff880025abb888 ffffffff8119ddec ffff880025abb898 ffff880029a49b58
[ 348.089511] 0000000000000000 ffff8800371dbe68 ffff880025abb898 ffffffff8119df46
[ 348.089514] ffff880025abb8b8 ffffffff8118a342 0000000000000000 ffff880029a49b40
[ 348.089516] Call Trace:
[ 348.089524] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
[ 348.089527] [<ffffffff8119df46>] mntput+0x26/0x40
[ 348.089531] [<ffffffff8118a342>] path_put+0x22/0x30
[ 348.089535] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
[ 348.089538] [<ffffffff811af110>] exit_fs+0x90/0xa0
[ 348.089542] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
[ 348.089548] [<ffffffff814899ea>] ? printk+0x4d/0x4f
[ 348.089552] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
[ 348.089556] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
[ 348.089559] [<ffffffff8148931e>] no_context+0x264/0x290
[ 348.089562] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
[ 348.089565] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
[ 348.089567] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
[ 348.089570] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
[ 348.089576] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
[ 348.089579] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
[ 348.089584] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
[ 348.089587] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
[ 348.089591] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
[ 348.089594] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
[ 348.089598] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
[ 348.089601] [<ffffffff81493165>] page_fault+0x25/0x30
[ 348.089605] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 348.089608] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 348.089611] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 348.089614] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 348.089617] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 348.089619] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 348.089622] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 348.089625] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 348.089628] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 348.089631] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 348.089635] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 348.089637] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 348.089640] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 348.089643] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 348.089645] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 348.089649] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 348.089650] Code: ff 01 48 8b 17 65 48 03 14 25 a8 db 00 00 b8 00 01 00 00 f0 66 0f c1 02 0f b6 cc 38 c1 74 13 66 2e 0f 1f 84 00 00 00 00 00 f3 90 <0f> b6 02 38 c8 75 f7 5d c3 0f 1f 44 00 00 55 48 89 e5 66 66 66
[ 376.076524] BUG: soft lockup - CPU#0 stuck for 23s! [ls:811]
[ 376.076531] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
[ 376.076599] CPU 0
[ 376.076605] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 376.076607] RIP: 0010:[<ffffffff81082552>] [<ffffffff81082552>] lg_local_lock+0x42/0x50
[ 376.076619] RSP: 0018:ffff880025abb858 EFLAGS: 00000297
[ 376.076621] RAX: 000000000000009e RBX: ffffffff81274859 RCX: 000000000000009f
[ 376.076623] RDX: ffff88003f610b90 RSI: ffffffff8119c0f0 RDI: ffffffff8184eec0
[ 376.076624] RBP: ffff880025abb858 R08: 00000000802e002c R09: ffff880025abbfd8
[ 376.076626] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002994b160
[ 376.076627] R13: 0000000000000000 R14: ffff880025adaf20 R15: ffff880025abb7c8
[ 376.076630] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 376.076631] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 376.076633] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
[ 376.076692] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 376.076753] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 376.076756] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 376.076757] Stack:
[ 376.076758] ffff880025abb888 ffffffff8119ddec ffff880025abb898 ffff880029a49b58
[ 376.076762] 0000000000000000 ffff8800371dbe68 ffff880025abb898 ffffffff8119df46
[ 376.076764] ffff880025abb8b8 ffffffff8118a342 0000000000000000 ffff880029a49b40
[ 376.076767] Call Trace:
[ 376.076775] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
[ 376.076777] [<ffffffff8119df46>] mntput+0x26/0x40
[ 376.076781] [<ffffffff8118a342>] path_put+0x22/0x30
[ 376.076786] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
[ 376.076789] [<ffffffff811af110>] exit_fs+0x90/0xa0
[ 376.076793] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
[ 376.076799] [<ffffffff814899ea>] ? printk+0x4d/0x4f
[ 376.076803] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
[ 376.076808] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
[ 376.076810] [<ffffffff8148931e>] no_context+0x264/0x290
[ 376.076813] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
[ 376.076816] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
[ 376.076818] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
[ 376.076821] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
[ 376.076827] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
[ 376.076831] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
[ 376.076835] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
[ 376.076839] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
[ 376.076843] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
[ 376.076846] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
[ 376.076849] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
[ 376.076852] [<ffffffff81493165>] page_fault+0x25/0x30
[ 376.076857] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 376.076860] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 376.076863] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 376.076866] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 376.076869] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 376.076871] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 376.076874] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 376.076876] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 376.076880] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 376.076882] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 376.076886] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 376.076889] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 376.076891] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 376.076894] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 376.076897] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 376.076900] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 376.076901] Code: ff 01 48 8b 17 65 48 03 14 25 a8 db 00 00 b8 00 01 00 00 f0 66 0f c1 02 0f b6 cc 38 c1 74 13 66 2e 0f 1f 84 00 00 00 00 00 f3 90 <0f> b6 02 38 c8 75 f7 5d c3 0f 1f 44 00 00 55 48 89 e5 66 66 66
[ 383.143757] INFO: rcu_preempt self-detected stall on CPU { 0} (t=18000 jiffies)
[ 383.143768] sending NMI to all CPUs:
[ 383.143782] NMI backtrace for cpu 0
[ 383.143783] CPU 0
[ 383.143788] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 383.143789] RIP: 0010:[<ffffffff8103a6ec>] [<ffffffff8103a6ec>] default_send_IPI_mask_sequence_phys+0xbc/0x100
[ 383.143809] RSP: 0018:ffff88003f603d68 EFLAGS: 00000046
[ 383.143810] RAX: 0000000000000400 RBX: 000000000000b022 RCX: 0000000000000000
[ 383.143811] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000300
[ 383.143812] RBP: ffff88003f603da8 R08: ffffffff818a32b8 R09: 0000000000000000
[ 383.143813] R10: 0000000000010002 R11: 3a73555043206c6c R12: ffffffff818a32b0
[ 383.143815] R13: 0000000000000400 R14: 0000000000000092 R15: 0000000000000002
[ 383.143816] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 383.143818] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 383.143819] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
[ 383.143824] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 383.143828] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 383.143830] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 383.143831] Stack:
[ 383.143832] ffffffff00000000 0000000000000000 ffff88003f603dc8 0000000000002710
[ 383.143835] ffffffff81839dc0 0000000000000000 ffffffff81839e80 ffff880025aba000
[ 383.143838] ffff88003f603db8 ffffffff8103e5e7 ffff88003f603dd8 ffffffff8103a8aa
[ 383.143840] Call Trace:
[ 383.143842] <IRQ>
[ 383.143848] [<ffffffff8103e5e7>] physflat_send_IPI_all+0x17/0x20
[ 383.143851] [<ffffffff8103a8aa>] arch_trigger_all_cpu_backtrace+0x5a/0x90
[ 383.143857] [<ffffffff810e0f0a>] rcu_pending+0x24a/0x580
[ 383.143859] [<ffffffff810e23b9>] rcu_check_callbacks+0xd9/0x220
[ 383.143863] [<ffffffff81067808>] update_process_times+0x48/0x90
[ 383.143868] [<ffffffff810ae0e4>] tick_sched_timer+0x64/0xd0
[ 383.143871] [<ffffffff8107db27>] __run_hrtimer+0x77/0x270
[ 383.143874] [<ffffffff810ae080>] ? tick_nohz_handler+0x110/0x110
[ 383.143876] [<ffffffff8107e807>] hrtimer_interrupt+0xf7/0x230
[ 383.143882] [<ffffffff8149b0fc>] ? call_softirq+0x1c/0x30
[ 383.143886] [<ffffffff8149ba39>] smp_apic_timer_interrupt+0x69/0x99
[ 383.143889] [<ffffffff8149aa0a>] apic_timer_interrupt+0x6a/0x70
[ 383.143890] <EOI>
[ 383.143897] [<ffffffff81274859>] ? __percpu_counter_add+0x59/0xa0
[ 383.143902] [<ffffffff8119c0f0>] ? alloc_fdtable+0xf0/0xf0
[ 383.143907] [<ffffffff81082555>] ? lg_local_lock+0x45/0x50
[ 383.143910] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
[ 383.143912] [<ffffffff8119df46>] mntput+0x26/0x40
[ 383.143916] [<ffffffff8118a342>] path_put+0x22/0x30
[ 383.143921] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
[ 383.143923] [<ffffffff811af110>] exit_fs+0x90/0xa0
[ 383.143927] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
[ 383.143932] [<ffffffff814899ea>] ? printk+0x4d/0x4f
[ 383.143936] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
[ 383.143940] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
[ 383.143943] [<ffffffff8148931e>] no_context+0x264/0x290
[ 383.143946] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
[ 383.143949] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
[ 383.143951] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
[ 383.143955] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
[ 383.143961] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
[ 383.143964] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
[ 383.143968] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
[ 383.143972] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
[ 383.143976] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
[ 383.143979] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
[ 383.143982] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
[ 383.143985] [<ffffffff81493165>] page_fault+0x25/0x30
[ 383.143989] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 383.143993] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 383.143995] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 383.143999] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 383.144002] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 383.144004] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 383.144007] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 383.144009] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 383.144013] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 383.144015] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 383.144019] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 383.144022] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 383.144025] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 383.144027] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 383.144030] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 383.144033] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 383.144034] Code: 90 8b 0c 25 00 b3 5f ff 80 e5 10 75 f2 89 f0 c1 e0 18 89 04 25 10 b3 5f ff 41 83 ff 02 44 89 e8 41 0f 45 c7 89 04 25 00 b3 5f ff <eb> 8a 4c 89 f7 57 9d 66 66 90 66 90 48 83 c4 18 5b 41 5c 41 5d
[ 383.144173] NMI backtrace for cpu 1
[ 383.144176] CPU 1
[ 383.144179] Pid: 0, comm: swapper/1 Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 383.144181] RIP: 0010:[<ffffffff81042e46>] [<ffffffff81042e46>] native_safe_halt+0x6/0x10
[ 383.144189] RSP: 0018:ffff88003daabeb8 EFLAGS: 00000246
[ 383.144190] RAX: 0000000000000000 RBX: ffff88003daabfd8 RCX: 0000000100006177
[ 383.144191] RDX: ffff88003dbb07e8 RSI: 0000000000000086 RDI: 0000000000000082
[ 383.144192] RBP: ffff88003daabeb8 R08: 0000000000000000 R09: 0000000000000000
[ 383.144193] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000001
[ 383.144195] R13: ffff88003daaa000 R14: 0000000000000000 R15: 0000000000000000
[ 383.144196] FS: 0000000000000000(0000) GS:ffff88003f620000(0000) knlGS:0000000000000000
[ 383.144198] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 383.144199] CR2: 00007fc28cd0b000 CR3: 000000003c672000 CR4: 00000000000007e0
[ 383.144241] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 383.144266] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 383.144268] Process swapper/1 (pid: 0, threadinfo ffff88003daaa000, task ffff88003da3c890)
[ 383.144269] Stack:
[ 383.144270] ffff88003daabed8 ffffffff8101dc2f ffff88003daabfd8 ffffffff818a32b0
[ 383.144273] ffff88003daabf18 ffffffff8101ef16 0000000000000001 2ebcddbd1c0fb65d
[ 383.144276] ffff88003daabf08 0000000000000001 0000000000000000 0000000000000000
[ 383.144278] Call Trace:
[ 383.144284] [<ffffffff8101dc2f>] default_idle+0x4f/0x290
[ 383.144286] [<ffffffff8101ef16>] cpu_idle+0xf6/0x130
[ 383.144290] [<ffffffff814812a9>] start_secondary+0x1f9/0x200
[ 383.144291] Code: 00 00 00 00 00 55 48 89 e5 fa 5d c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 fb 5d c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 fb f4 <5d> c3 0f 1f 84 00 00 00 00 00 55 48 89 e5 f4 5d c3 66 0f 1f 84
[ 408.063121] BUG: soft lockup - CPU#0 stuck for 23s! [ls:811]
[ 408.063127] Modules linked in: vmhgfs(O) fuse coretemp kvm_intel kvm crc32c_intel ppdev snd_ens1371 snd_ac97_codec ac97_bus gameport snd_rawmidi snd_seq_device evdev snd_pcm snd_page_alloc snd_timer vmw_balloon vmwgfx snd ttm microcode e1000 soundcore psmouse serio_raw pcspkr joydev parport_pc parport drm i2c_piix4 intel_agp i2c_core shpchp intel_gtt processor button container ac vmci(O) pci_hotplug ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod sd_mod cdrom uhci_hcd ata_generic mptspi pata_acpi ehci_hcd scsi_transport_spi mptscsih usbcore floppy usb_common mptbase ata_piix libata scsi_mod
[ 408.063183] CPU 0
[ 408.063188] Pid: 811, comm: ls Tainted: G D O 3.6.4-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
[ 408.063190] RIP: 0010:[<ffffffff81082552>] [<ffffffff81082552>] lg_local_lock+0x42/0x50
[ 408.063200] RSP: 0018:ffff880025abb858 EFLAGS: 00000297
[ 408.063202] RAX: 000000000000009e RBX: ffffffff81274859 RCX: 000000000000009f
[ 408.063203] RDX: ffff88003f610b90 RSI: ffffffff8119c0f0 RDI: ffffffff8184eec0
[ 408.063204] RBP: ffff880025abb858 R08: 00000000802e002c R09: ffff880025abbfd8
[ 408.063205] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88002994b160
[ 408.063207] R13: 0000000000000000 R14: ffff880025adaf20 R15: ffff880025abb7c8
[ 408.063209] FS: 0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[ 408.063210] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 408.063211] CR2: 0000000000000078 CR3: 000000000180c000 CR4: 00000000000007f0
[ 408.063216] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 408.063220] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 408.063221] Process ls (pid: 811, threadinfo ffff880025aba000, task ffff8800371db870)
[ 408.063222] Stack:
[ 408.063224] ffff880025abb888 ffffffff8119ddec ffff880025abb898 ffff880029a49b58
[ 408.063227] 0000000000000000 ffff8800371dbe68 ffff880025abb898 ffffffff8119df46
[ 408.063229] ffff880025abb8b8 ffffffff8118a342 0000000000000000 ffff880029a49b40
[ 408.063232] Call Trace:
[ 408.063239] [<ffffffff8119ddec>] mntput_no_expire+0x2c/0x160
[ 408.063242] [<ffffffff8119df46>] mntput+0x26/0x40
[ 408.063246] [<ffffffff8118a342>] path_put+0x22/0x30
[ 408.063250] [<ffffffff811af05a>] free_fs_struct+0x1a/0x40
[ 408.063253] [<ffffffff811af110>] exit_fs+0x90/0xa0
[ 408.063257] [<ffffffff8105b9cc>] do_exit+0x18c/0x940
[ 408.063263] [<ffffffff814899ea>] ? printk+0x4d/0x4f
[ 408.063267] [<ffffffff810594f1>] ? kmsg_dump+0xc1/0xd0
[ 408.063271] [<ffffffff81493cdd>] oops_end+0x9d/0xe0
[ 408.063274] [<ffffffff8148931e>] no_context+0x264/0x290
[ 408.063277] [<ffffffff814896fe>] __bad_area_nosemaphore+0x1cf/0x1ee
[ 408.063280] [<ffffffff81489730>] bad_area_nosemaphore+0x13/0x15
[ 408.063282] [<ffffffff814961b0>] do_page_fault+0x4a0/0x580
[ 408.063285] [<ffffffff814927b5>] ? _raw_spin_unlock_bh+0x25/0x30
[ 408.063302] [<ffffffffa02a1384>] ? HgfsTransportRemovePendingRequest+0x44/0x50 [vmhgfs]
[ 408.063306] [<ffffffffa02a1570>] ? HgfsTransportSendRequest+0x110/0x240 [vmhgfs]
[ 408.063310] [<ffffffff8116adbc>] ? kfree+0x2c/0x150
[ 408.063314] [<ffffffffa02a44ae>] ? HgfsBdChannelFree+0xe/0x10 [vmhgfs]
[ 408.063317] [<ffffffffa02a1450>] ? HgfsTransportFreeRequest+0x10/0x20 [vmhgfs]
[ 408.063320] [<ffffffffa02a0195>] ? HgfsRequestPutRef+0x25/0x30 [vmhgfs]
[ 408.063324] [<ffffffffa02a5895>] ? HgfsPrivateGetattr+0x65/0x440 [vmhgfs]
[ 408.063327] [<ffffffff81493165>] page_fault+0x25/0x30
[ 408.063331] [<ffffffffa02a6986>] ? HgfsDentryRevalidate+0x16/0x80 [vmhgfs]
[ 408.063335] [<ffffffff8118b285>] lookup_fast+0x265/0x310
[ 408.063337] [<ffffffff8118ce2f>] path_lookupat+0x10f/0x7f0
[ 408.063341] [<ffffffff81145135>] ? handle_pte_fault+0x95/0xaa0
[ 408.063343] [<ffffffff8118d541>] do_path_lookup+0x31/0xc0
[ 408.063346] [<ffffffff8118ada3>] ? getname_flags+0x53/0xf0
[ 408.063349] [<ffffffff8118fc1d>] user_path_at_empty+0x5d/0xa0
[ 408.063351] [<ffffffff81495fd4>] ? do_page_fault+0x2c4/0x580
[ 408.063354] [<ffffffff8114c6cd>] ? do_mmap_pgoff+0x24d/0x340
[ 408.063357] [<ffffffff8118fc71>] user_path_at+0x11/0x20
[ 408.063360] [<ffffffff811843c5>] vfs_fstatat+0x35/0x70
[ 408.063363] [<ffffffff81191d87>] ? do_vfs_ioctl+0x97/0x530
[ 408.063366] [<ffffffff8118441e>] vfs_lstat+0x1e/0x20
[ 408.063368] [<ffffffff811845ba>] sys_newlstat+0x1a/0x40
[ 408.063371] [<ffffffff81493165>] ? page_fault+0x25/0x30
[ 408.063374] [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
[ 408.063375] Code: ff 01 48 8b 17 65 48 03 14 25 a8 db 00 00 b8 00 01 00 00 f0 66 0f c1 02 0f b6 cc 38 c1 74 13 66 2e 0f 1f 84 00 00 00 00 00 f3 90 <0f> b6 02 38 c8 75 f7 5d c3 0f 1f 44 00 00 55 48 89 e5 66 66 66
Anyone got an idea what to do? Would be nice to share files between the host and guest System...
Nik
PS: Read these two wiki pages already but nothing helps..
https://wiki.archlinux.org/index.php/In … _in_VMware
https://wiki.archlinux.org/index.php/In … _(systemd)
Last edited by nik1982 (2012-11-02 18:55:22)

I have the same problem. Here's what journalctl gives me after I try to list the directory:
Nov 10 14:56:31 porky kernel: BUG: unable to handle kernel paging request at ffffffffffffffa8
Nov 10 14:56:31 porky kernel: IP: [<ffffffffa02b9078>] HgfsPermission+0x38/0xa0 [vmhgfs]
Nov 10 14:56:31 porky kernel: PGD 180e067 PUD 180f067 PMD 0
Nov 10 14:56:31 porky kernel: Oops: 0000 [#1] PREEMPT SMP
Nov 10 14:56:31 porky kernel: Modules linked in: fuse e1000 joydev ppdev intel_agp snd_ens1371 snd_ac97_codec ac97_bus gameport vmwgfx snd_rawmidi snd_seq_device snd_pcm ttm snd_page_alloc snd_timer drm snd soundcore i2c_piix4 psmouse parport_pc parport shpchp intel_gtt processor coretemp crc32c_intel microcode i2c_core pci_hotplug pcspkr serio_raw evdev vmw_balloon button ac container vmhgfs(O) vmci(O) vmblock(O) ext4 crc16 jbd2 mbcache dm_mod sr_mod cdrom hid_generic ata_generic pata_acpi usbhid hid sd_mod uhci_hcd ehci_hcd usbcore usb_common ata_piix mptspi scsi_transport_spi mptscsih mptbase libata floppy vmw_pvscsi scsi_mod
Nov 10 14:56:31 porky kernel: CPU 3
Nov 10 14:56:31 porky kernel: Pid: 753, comm: zsh Tainted: G O 3.6.6-1-ARCH #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
Nov 10 14:56:31 porky kernel: RIP: 0010:[<ffffffffa02b9078>] [<ffffffffa02b9078>] HgfsPermission+0x38/0xa0 [vmhgfs]
Nov 10 14:56:31 porky kernel: RSP: 0018:ffff88007665fe68 EFLAGS: 00010286
Nov 10 14:56:31 porky kernel: RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000002b5843
Nov 10 14:56:31 porky kernel: RDX: ffff880037b1ddf0 RSI: 0000000000000010 RDI: ffff88007b0f8000
Nov 10 14:56:31 porky kernel: RBP: ffff88007665fec8 R08: 0000000000016c20 R09: ffff88007f676c20
Nov 10 14:56:31 porky kernel: R10: ffffffff8118ae63 R11: 0000000000000004 R12: 0000000000000010
Nov 10 14:56:31 porky kernel: R13: ffff88007b0f8000 R14: 00007fe7e8ba7428 R15: 0000000000000000
Nov 10 14:56:31 porky kernel: FS: 00007fe7eb1bb700(0000) GS:ffff88007f660000(0000) knlGS:0000000000000000
Nov 10 14:56:31 porky kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Nov 10 14:56:31 porky kernel: CR2: ffffffffffffffa8 CR3: 00000000767bb000 CR4: 00000000000007e0
Nov 10 14:56:31 porky kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Nov 10 14:56:31 porky kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Nov 10 14:56:31 porky kernel: Process zsh (pid: 753, threadinfo ffff88007665e000, task ffff88006d98e8d0)
Nov 10 14:56:31 porky kernel: Stack:
Nov 10 14:56:31 porky kernel: 0000000000000000 ffff8800379d4e40 ffff88007b0f8000 0000000200001001
Nov 10 14:56:31 porky kernel: 0000000000000000 ffff88007a41eab8 ffff88006d98e8d0 0000000000000086
Nov 10 14:56:31 porky kernel: ffff88007665fee8 ffffffff8107e056 0000000000000000 ffff88007b0f8000
Nov 10 14:56:31 porky kernel: Call Trace:
Nov 10 14:56:31 porky kernel: [<ffffffff8107e056>] ? hrtimer_try_to_cancel+0x86/0x110
Nov 10 14:56:31 porky kernel: [<ffffffff8118b79c>] __inode_permission+0x7c/0xc0
Nov 10 14:56:31 porky kernel: [<ffffffff8118b7f8>] inode_permission+0x18/0x50
Nov 10 14:56:31 porky kernel: [<ffffffff8117e2fd>] sys_faccessat+0xdd/0x1c0
Nov 10 14:56:31 porky kernel: [<ffffffff8117e3f8>] sys_access+0x18/0x20
Nov 10 14:56:31 porky kernel: [<ffffffff81499f2d>] system_call_fastpath+0x1a/0x1f
Nov 10 14:56:31 porky kernel: Code: 90 31 c0 40 f6 c6 10 89 f3 74 63 48 8b 97 18 01 00 00 48 8b 02 48 39 c2 75 11 eb 67 0f 1f 80 00 00 00 00 48 8b 00 48 39 c2 74 0e <8b> 48 a8 48 8d b8 50 ff ff ff 85 c9 74 ea 48 85 ff 74 45 48 8d
Nov 10 14:56:31 porky kernel: RIP [<ffffffffa02b9078>] HgfsPermission+0x38/0xa0 [vmhgfs]
Nov 10 14:56:31 porky kernel: RSP <ffff88007665fe68>
Nov 10 14:56:31 porky kernel: CR2: ffffffffffffffa8
Nov 10 14:56:31 porky kernel: ---[ end trace d9bf986dbc6c4651 ]---

Windows 7 computers asking for network password to access shared files and printers on Windows XP PRO computer.

I have a network of 10 computers configured as peer-to-peer work group. I have upgraded one of the ten from Windows XP PRO to Windows 7 PRO. The other nine computers are all running XP PRO. AS near as I can tell they are all configured the same. I have the
same user and same passwords on all computers. One of XP computers is used as a print server. The Windows 7 computer initially was able to access shared files and printers on all XP machines with out requesting a network password.
Suddenly, the Win 7 computer began requesting a network password to access the shared files and printers on the XP print server. It will not accept any of the user names or passwords (all administrators on both machines with identical names and passwords.)
The Win 7 computer has no problem accessing the shared files on the other XP machines. It can even access shared printers in a different work group. Apparently something has changed but I'm at my wits end trying to figure what changed on either the Windows
7 machine or the print server XP machine.
I would appreciate any help. Thank you

Hi,
Based on my research, I would like to suggest the following:
1.
Disable simple file sharing on the Windows XP computer:
How to disable simple file sharing and how to set
permissions on a shared folder in Windows XP
2.
On the Windows 7 computer, go to “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” and ensure that the
following items are turned ON:
Network Discovery
File and printer sharing
And this one is OFF:
Password protected sharing
3.
Temporarily disable or remove all the security software (firewall, anti-virus, anti-spyware, etc.) on the computers and check if it works.
In addition,
I would like to share the following with you for your reference:
Troubleshoot file and printer
sharing
Hope this helps. Thanks.
Nicholas Li - MSFT

Can't access shared library to import. Why?

When trying to access sharing, library will not come up in iTunes so that it can be imported. Can anyone tell me why?

Rebel,
iTunes has two kinds of sharing: regular sharing, which allows listening but not copying, and Home Sharing, which does allow copying.
Make sure you are using Home Sharing, and that both computers are authorized to the relevant account.

Access Denied when trying to access shared folders on the server with administrative privileges

I have problem accessing shared folder on the server machine from Windows 7 machine even if I try to access it with administrative privileges (server Administrator account). I will try now to explain better my situation.
In my company, we have small network infrastructure with one main server machine (HP ProLiant server) with Windows Server 2012 R2 installed and couple of desktop machines. The network is administrated by me.
On Windows Server we have installed and setup DHCP, DNS, Remote Access and Routing, File and Storage and Active Directory services. Desktop machines are having Windows 8.1 Pro, Windows 8.1 or Windows 7 Home Premium installed on them. In Active
Directory I have created domain, User groups and Users for employees in my company and so far, I didn't added desktop machines to the domain.
Also, I've created one folder on the server which should contain different projects data for network users and I have set access permissions and security for this folder and shared it on the network (I've added couple of users to one user group and I
gave Full control to this group over this folder). When I try to access this folder from network, I've been asked for login credentials (normally), where I just type in one of users username and password who has been given access permissions to (who is member
of group with full control over the folder). From Windows 8.1 Pro and Windows 8.1 machines I can access and work on this folder without any problems.
The problem comes with Windows 7 machines. On Windows 7 machines (I have also tried this with Windows 7 Ultimate in VMWare) I can access server, I can see its shares, but as soon I try to access folder I've created for projects, I get Access Denied message
with request for User login credentials. Whichever user account I use (even servers main Administrator account) I keep getting this message over and over and I'm unable to access it at all.
I have also tried to access the server through VPN (from local or outside) but I'm getting the same error again. Also I've tried to add these Windows 7 machines to the domain and login with domain user but the result is the same. Turned off both firewalls
(on server and desktop machines, which I know is unnecessary, but lets try it), still same case. I've tried couple more things with registry editor on desktop machines which I found on different forums and websites but still no luck. And now I don't know
what else I can do.
Does anyone knows what's the problem here, have I set something wrong, have not set something I should?

Hi MeipoXu,
thanks for your response. I will first answer on your question.
Yes, the main issue is that we can see the folder when we access the server but we cannot access its contents from Windows 7 machines. I have tried on two machines, one with Windows 7 Home Premium version and the other one with Windows 7 Ultimate version
and the situation is the same.
As you recommended, I've checked Network Discovery and File and Printer Sharing and the situation is next: File and Printer Sharing is turned on all layers (Private, Public and Domain) while Network Discovery is off for all layers too. I don't know if this
is normal thing but Network Discovery cannot be turned on in Windows Server (I'm able to select Turn on Network Discovery and apply the changes, but when I get back to this settings page, I again see that it's turned off, so I assume this can't be changed
at all).
I also tried with icacls in command prompt and everything seems to be ok there regarding permissions. Share permissions are set to Full control to Everyone and Security permissions are set to Full control only for Administrators and the user group I've created
for employees in my company. The confirmation for this is that on Windows 8 machines you can access this folder without any problem and without getting any message connected with access permissions with any user account within this user group. This share is
created through File and Storage Services service in Server Manager panel.
And then something came up on my mind. I went in Server Manager to check shared folder settings in File and Storage Services and under Settings page I saw that "Encrypt data access" has been enabled (I enabled this option because I thought
I will get more security with this option). I asked my self what would happen if I disable it, tried it and now everything works ok on Windows 7 machines too. Now I assume that Windows 7 doesn't have this feature implemented or there are some
settings which needs to be set on Windows 7 machines to make this encryption thing work with Windows Server. So basically, I will let this feature off for now until I find out more about it and how to implement it to work with all operating systems.
I want to thank you once more for your kind help!

Can no longer print with Laserjet 1018 under Yosemite (10.10.1)

Hello all,
I used to be able to use the HP Laserjet 1020 driver from Apple's HP Print Drivers 3.0 kit to print documents on my Laserjet 1018. It worked like a charm. Now that I have done a clean install of Yosemite, updated to 10.10.1, and installed the HP Print Drivers 3.0 package, the documents get sent to the print queue but no documents are printed...
What are my options, short of buying a new printer or downgrading to Mavericks?
I really resent regressions.... especially those you only find out about after the fact.

I just realized I had been trying to use the HP LS 1200 driver for my 1018, while I should have been using the 1022 driver, which is the one that works with the 1018 (since there is no specific driver for 1018).
So now that I have already upgraded to 10.10.1, I'm not sure if the update fixed anything for me or if I was just using the wrong driver from the start.
Anyway, the HP LaserJet 1022 driver works on the 1018 on Yosemite 10.10.1. Confirmed.

Any ideas why I can no longer access shared files on networked PC's in my office? I keep getting a "server not exist or unavailable" error.

I have been able to access the files in the past. Actually when I've had this problem before a restart has solved it. Not this time. And it keeps happening. Even more strange, Filemaker is able to access shared databases stored on the same PC's. Why can Filemaker see these computers? Both also show up in the finder but when I try to connect I get the error. I also tried "connect as" with no success. Any ideas?

Thanks Barney, I am now using pages to open exisiting Word documents. and then saving in the new format. I then trash the old incompatable (.doc) file.
This works OK, but it will be a time consuming operation to be repearted on each file that I use.
Is there any shortcut to enable sync all of the .doc files to Page?
I have not managed to recover Entourage email files . But now use Mail application, which is fine.
Encountered problems are ongoing.
I have an Epson Epson Stylus Photo Rx430 printer.
Since upgrading to OSX10.7 print files do not load to the printer. The Epson job box shows data is being sent to printer but it the task is never completed.
I take this to be a Printer Driver issue.
Today, I have been in contact with Epson Printer support, enquiring if they have any driver updates for RX430 that would be compatable with OSX10.7 Lion.
I was notified by Epson that they do not have any drivers for any of their printers for the new OSX 10.7.
How may I continue using my now unsupported Epson printer?

[SOLVED] cups and laserjet 1018

Hi all,
I've been trying to use cups to set up a Laserjet 1018 with no success. The problem I'm having is that, even though according to the CUPS web interface my job is completed, my printer doesn't print anything. That's what I tried so far (based on the archlinux entry on CUPS and forums):
- I installed the drivers hplip and foo2zjs.
- cups is in my daemons array.
- I tried to stop and start usblp module.
- the device node permissions are correct.
That's the output of my /var/log/cups/error_log (I'm using "LogLevel debug" in my cupsd.conf):
D [25/Jun/2011:21:30:05 -0600] cupsdReadClient: 16 POST / HTTP/1.1
D [25/Jun/2011:21:30:05 -0600] cupsdAuthorize: No authentication data provided.
D [25/Jun/2011:21:30:05 -0600] cupsdReadClient: 16 1.1 Get-Jobs 1
D [25/Jun/2011:21:30:05 -0600] Get-Jobs ipp://localhost:631/printers/Hewlett-Packard-HP-LaserJet-1018
D [25/Jun/2011:21:30:05 -0600] [Job 1] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 2] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 3] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 4] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 5] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 6] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 7] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 8] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 9] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 10] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 11] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 12] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 13] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 14] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 15] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 16] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 17] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 18] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 19] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 20] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 21] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 22] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 23] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 24] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 25] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 26] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 27] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 28] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] [Job 29] Loading attributes...
D [25/Jun/2011:21:30:06 -0600] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Hewlett-Packard-HP-LaserJet-1018) from localhost
D [25/Jun/2011:21:30:06 -0600] cupsdReadClient: 16 WAITING Closing on EOF
D [25/Jun/2011:21:30:06 -0600] cupsdCloseClient: 16
D [25/Jun/2011:21:30:06 -0600] PID 2503 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [25/Jun/2011:21:30:06 -0600] cupsdSetBusyState: Not busy
D [25/Jun/2011:21:30:36 -0600] cupsdReadClient: 12 WAITING Closing on EOF
D [25/Jun/2011:21:30:36 -0600] cupsdCloseClient: 12
Any suggestions are more than welcome!!
Cheers,
Last edited by falsum (2011-06-26 12:39:10)

owain wrote:I had trouble with another LaserJet (the 1005), until I realised that as well as installing hplip, I needed to run 'hplip -i' (as root) to get it to download the necessary firmware.
For some reason, I don't have a "hplip" command (I searched for this file in every folder).

Printing problems with hp laserjet 1018

- printing problem with my hp laserjet 1018 (no *.pdf files!), all other documents were printed
- hp photosmart premium c309 works with all file types
Windows 7 64 bit
Adobe Acrobat Pro 10.1.7
Acrobat Reader 11.0.3

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Accessing shared HP laserjet 1018

Similar Messages

Maybe you are looking for