Accessing solaris box while its down/not connected to network

How Unix SA access this server when its down and not accessable on network? there is solaris server having problem, may need to reboot, but unable to access it....any idea what logs i should check etc also help....

Hi.
Docs about this server.
http://docs.oracle.com/cd/E19088-01/v120.srvr/index.html
This server have System Controller (LOM) , that can have access via serial port ( SER MGMT) and Network ( NET MGMT)
More information - User's Guide:
http://docs.oracle.com/cd/E19088-01/v120.srvr/816-2090-10/816-2090-10.pdf
From page 101.
After connectiong to LOM you can:
1. Check status: environment
2. Connect to server's console: console
3. Manage Power: poweron ; poweroff
4. Check some logs: loghistory ; show eventlog
Regards.

Similar Messages

I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

My firefox page is not connecting to network and also its not displaying the troubleshoot problems option?

my firefox page is not connecting to network and also its not displaying the troubleshoot problem option?

At the very least, I recommend you restart your router, (your internet box).
More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it? Did you do anything to change your setup, and if you did, what?

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

ITS could not connect to the Web Application Server or the R/3 System

ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
I have not managed to get ../scripts/wgate/admin/! to work either.
Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
If yes, any ideas how?
Many thanks
Tim

Hi Tim,
You have to check the connection data in the relevant service file e.g.
~systemname
~messageserver
~logingroup
~appserver
~systemnumber
~routestring
~connectstring
If the Agate doesn't run you would see an ITS 500 error in the browser.
Thanks and regards,
Dieter

My ipad2 will not connect to network since last iOs update.

My iPad 2 will not connect to network since last iOs5 update.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I had no problem with my IPad 3 connecting to my wi-fi but for some reason lately it tell me can not connect to network. I reset both my wifi and my ipad and I still get the same error.

I've had my IPad 3 for awhile and had no problems with it. The other day I went to connect to my wi-fi and it told me could not connect to network. It recognizes my wi-fi but won't connect. I have shut off my wi-fi and still the same problem. Today I reset my ipad back to factory and when I get to the wifi setup I still get unable to join the network. What is wrong

Dont use a password to connect the ipad and try if unable to join happens try another network. After that it is a repair. Now most likely it is the password on router. typically you access your router with http://192.168.1.1/ BUT it may be different if you changed it or your router uses different one.

Error: EPrint not Enabled, Also: Printer not connected to Network

I have been using this printer and EFax until recently when EFax wont work. I am connected to Network, I can use printer for printing from laptop, IPAD and Iphone. Have good connection. When I attempt to send EFAX, I get "Your printer is not connected to Network" Then I am told to enable EPrint, IT IS enabled. Printer is great, EFax wont work.

This reply may be late for this user, but it might be helpful for any current users.
I managed to change the modem's IP address to match that of the printer. In my case the printer worked fine wirelessly until I moved to a new place and installed a new modem. Here is what I did to solve the problem:
1. At the printer, click on the wireless button, wireless settings, print network configuration page. This will print a page with the printer's IP address (in my case: 192.168.0.13)
2. I accessed my modem via the internet browser, typing 192.168.1.1 (this is one of the default addresses (192.168.0.1 is also common). Default user and password is admin (usually). There I changed the modem's IP address to 192.168.0.1 and the range to start at 192.168.0.13 (my printer's IP address).
3. I saved the settings (the modem will reboot and you will be offline, it may take some 20 seconds before the modem is visible again).
4. Reconnect to the modem and check if internet is still working. Then try to install the printer again.
This worked for me after I read several other postings.
Good luck!

Macbook not connecting to network

My Macbook's internet won't work all of a sudden. I was home for the weekend and it was working fine on my home network. This morning, I woke it from sleep and although airport says it's connected to my dorm's network, the net won't connect (no Safari, Firefox, no Mail, etc). I've tried everything I know; restart, delete the network and re-add it, try another account... Still nothing.
The network is working fine, I can access it on my iPad and iPod.
Any thoughts?

Imaan Hisham wrote:
and also taken from "About NVRAM and PRAM":
"OS X does not store network settings in NVRAM / PRAM. If you are troubleshooting a network issue, resetting it will not help."
This is if you are troubleshooting a network issue. If your computer simply would not connect to networks, it may not be a setting that is screwed up, it may just need a reset to cause it to start using the wireless again, it doesn't hurt to try and at least some information was given to you to help. Nobody said it would fix anything, they simply stated TRY...

My iphone 4s will not connect to networks. the button is greyed out and cannot turn o. I have reset the network settings and it still does not work - any ideas?

My iphone 4s will not connect to networks. the button is greyed out and cannot turn on. I have reset the network settings and it still does not work - any ideas?

Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.

HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable. I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99% installed on the progress bar and sits there until it times out. I suspect one of the follow but am open to other ideas from those more knowledgeable:
1. Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
2. Could my WPA WPA2 PSK AES encrytion be messing it up? Are the modern firmware and updates designed to accept these ? I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase. What to do if so?
3. Could Church Lady be correct and that it is Satan preventing the installation? If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

Hi @Marvalina1968,
Welcome to the HP Forums!
I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
First to answer your questions:
It is possible the printer could be locked to an old configuration and needs to be reset.
I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
Your Norton antivirus, could possible be causing the installation to fail.
Please take a look through the following guides:
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Printer Does Not Maintain Wireless Connection.
If the guides do not resolve the issue, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Re-install the software. HP LaserJet Full Feature Software and Driver.
Hope this solves your problem, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Not connected to network although it is connected wirelessly

I have a HP Photosmart 7510 All in one printer. I can print from computers wirelessly but it says not connected to network when i try to use web services, facebook, or efax. I cant even run an update because if no internet connection. i have tried rebooting routers and printer. Nothing else has issues with internet with router. I have also tried typing in the Ip address in the web address bar but when i go to networking it is asking for admin user name and password that i do not know. How can i fix this issue? I have downloaded drivers and software from HP site also.

Hi @Sniper187
Welcome to the HP Support Forums. I gather that you have encountered some difficulties with your Photosmart 7510 printer.
I have included a link to a post by @PrintApper regarding the Printables titled HP Apps Service Retired on several printers. It has the information regarding the apps on your printer. I have also included a link to a post by @PrintApper regarding eFax titled eFax users - please read. It has the information regarding the eFax feature.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

Hey X300X,
Thanks for the question. I understand you are experiencing issues with iMessages. The following article may help to resolve your issue:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine., I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine.

I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine., I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine.

Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Galaxy Nexus Not connecting to network

Good Evening,
I just received a replacement phone for Galaxy Nexus. The phone is not connecting to network. I am able to connect to wifi but unable to make calls or send texts since having the phone activated last night. When I was in the store last night I was able to receive and send a few text messages but since then haven't been able to communicate using my phone. I don't know if this an issue with the service in the area North Attleboro, MA or with my phone. Been on hold for 20 minutes with customer service.
Thank you,
James
Private info removed as required by the Terms of Service.
Message was edited by: Admin Moderator

Thanks for the additional information jdeguilio!
No issues noted for North Attleboro. Please reprogram and test. To reprogram please pull the SIM card for one minute, then reinsert and power off/on. I see that you are using the same SIM from previous phone and this should not be a problem; however, if you accidentally touched the golden portion of the SIM card that could cause some issues. If reprogramming does not improve, try a new SIM card. You can get one for free at any Verizon Wireless http://bit.ly/3SdsA corporate store.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

Accessing solaris box while its down/not connected to network

Similar Messages

Maybe you are looking for