Accessing Source times out

When I try to access my primary library from the Sources menu, the process times out, and my AppleTV restarts after just hanging for many many minutes. I have a large library of both photos and music, so I'm guessing that this poses a problem. Has anyone else experienced this?
AppleTV Mac OS X (10.4.9)

Gene,
Mine is functioning, or disfunctioning the exact same way. I did a re-install of the Apple TV and let it sync to my library using it's defaults. It copied over about 7,000 songs. But then when I went to stream, I get the exact sme error as you.
If I had enough time I would use a smaller set of my music, say 10,000 songs, and do the same set-up to see if it would then stream properly.
As an aside, It would be nice to save the iTunes library streaming file over to the Apple TV so it would not have to "load" it each time. In our situation, it would be a better use of the drive space.

Similar Messages

E-Sourcing Time out

Hi ,
Any one help me where to set/check the System Time out option for E-sourcing ..
Thanks in Advance

TDeepika,
Try the system parameter 'upp.metering.login_inactivity_timeout' (field value is in minutes). You have to log into the system using the 'system' account to modify the system property list.
Best Regards, Scott

AUR PKGBUILD Source URL times out [SOLVED]

I'm trying to build assogiate 0.2.1
http://aur.archlinux.org/packages.php?ID=9860
The source code is not available. The URL in the PKGBUILD for source times out.....
Connecting to www.kdau.com|216.231.55.137|:80... failed: Connection timed out.
Giving up.
SO.......I tried to use the source from Debian,
http://packages.debian.org/testing/utils/assogiate
http://packages.debian.org/source/squeeze/assogiate
editing the PKGBIULD source URL and md5sum, but now I get:
==> ERROR: One or more files did not pass the validity check!
The Modified PKGBUILD:
#Contributor: jordz ([email protected])
pkgname=assogiate
pkgver=0.2.1
pkgrel=4
pkgdesc="An editor of the MIME file types database for GNOME"
arch=(i686 x86_64)
depends=('glibmm' 'gtkmm' 'gnome-vfsmm' 'libxml++' 'gettext' 'libtool' 'gnome-doc-utils')
makedepends=('pkgconfig')
source=(http://ftp.de.debian.org/debian/pool/main/a/assogiate/assogiate_0.2.1.orig.tar.gz)
md5sums=('a63986ab2c3ea3e1a31f263ca0ff643d')
license=('GPL')
url="http://www.kdau.com/projects/assogiate/"
build()
cd ${srcdir}/$pkgname-$pkgver
./configure --prefix=/usr --disable-scrollkeeper
make || return 1
make DESTDIR=${pkgdir} install
Now what to do next?
Last edited by jeff story (2009-11-29 09:16:45)

==> Finished making: assogiate 0.2.1-4 x86_64 (Sun Nov 29 01:13:59 PST 2009)
SOLVED..........My bad. I didn't save the last edit to the md5sum!!!
Last edited by jeff story (2009-11-29 09:46:55)

Transaction on Oracle 9i data source connection times out before JTA transaction

Hello,
I have a MDB with a long-running transaction (3600 second timeout).
In the MDB, I make a call to another EJB that has its transaction
attribute set to NotSupported (I do this because I need
non-transactional semantics in the called method).
If the EJB call take more than about a minute to complete, then I get a
datasource error when using the data source in the MDB after the return
(see error at bottom). However, if the call completes quickly, then I do
not get this error. It seems like the datasource connection somehow
times out, but I don't see where I can change this timeout.
pseudocode:
// timeout set to 3600 seconds
transactional MDB onMessage() {
// receive connection from Oracle BEA driver
// myEJB performLongOperation has transaction attribute
// set to NotSupported
String result = myEJB.performLongOperation();
// use connection from Oracle BEA driver
If the performLongOperation takes more than about a minute, then I get
the following error when using the connection after the operation:
Caused by: java.sql.SQLException: XA error: XAER_NOTA : The XID is not
valid start() failed on resource 'Oracle IDENT Connection Pool':
XAER_NOTA : The XID is not valid
javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
Error Occurred. Native Error: 24756
at
weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
urceInfo.java:1075)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
sourceInfo.java:1007)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
ourceInfo.java:218)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
250)
at
weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:185)
at
weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.jav
a:80)
at
weblogic.jdbc.wrapper.Connection.createStatement(Connection.java:297)

Thanks for the reply.
I don't have contract customer support access with BEA, and thus I can't
download the patch. Is there any other workaround for this?
Thanks
Slava Imeshev wrote:
Steven,
Please check this:
http://www.viewtier.com/newsgroups/thread.jspa?threadID=20&tstart=0
Hope this helps.
Regards,
Slava Imeshev
"Steven Ostrowski" <[email protected]> wrote in message news:40cf35cc@mktnews1...
I have a MDB with a long-running transaction (3600 second timeout).
In the MDB, I make a call to another EJB that has its transaction
attribute set to NotSupported (I do this because I need
non-transactional semantics in the called method).
If the EJB call take more than about a minute to complete, then I get a
datasource error when using the data source in the MDB after the return
(see error at bottom). However, if the call completes quickly, then I do
not get this error. It seems like the datasource connection somehow
times out, but I don't see where I can change this timeout.
pseudocode:
// timeout set to 3600 seconds
transactional MDB onMessage() {
// receive connection from Oracle BEA driver
// myEJB performLongOperation has transaction attribute
// set to NotSupported
String result = myEJB.performLongOperation();
// use connection from Oracle BEA driver
If the performLongOperation takes more than about a minute, then I get
the following error when using the connection after the operation:
Caused by: java.sql.SQLException: XA error: XAER_NOTA : The XID is not
valid start() failed on resource 'Oracle IDENT Connection Pool':
XAER_NOTA : The XID is not valid
javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
Error Occurred. Native Error: 24756
at
weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
urceInfo.java:1075)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
sourceInfo.java:1007)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
ourceInfo.java:218)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
250)
at
weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:185)
at
weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.jav
a:80)
at
weblogic.jdbc.wrapper.Connection.createStatement(Connection.java:297)

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

HT204053 Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

There is no problem about using one ID for iTunes, iTunes in the Cloud and iTunes Match, and another for iCloud and its email and syncing facilities. This way you can all use the same iTunes account but have separate emails and calendars etc.

When I try to access my online bank account thru Firefox, the session times out. This is on a new Macbook Pro. On my old Macbook Pro I can access the site.

When I try to access my online bank account thru Firefox, the session times out. This is on a new Macbook Pro. On my old Macbook Pro I can access the site. I know it is probably something in settings but cannot figure it out.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Can't access Web Site, super slowly and time out!

Hi all,
I am using Server 2012 R2 with Hyper-V, HP DL360 G6 Server
The Master OS have a NIC1 to VLAN1 Switch (Also in the Cisco SG300 Switch)
Plus other NIC2 connect to Cisco SG300 28 Switch (Running in L3 Mode), this Cisco then connect to a SonicWALL NSA 2400.
I build some VLAN31 on SonicWALL NSA 2400, and add this to the Cisco SG300 as Truck Port connect Both...
Other Port on the SG300 are untouch, so mean default running mode is Truck mode, and one of it port connect to the NIC2 to the Server ...
Ok, if Hyper-V VM, not enable VLAN in the Hyper-V Management in 2012 R2, it can take the DHCP from the SonicWALL NSA 2400 no problems, can see other LAN (VLAN1) machine well both direction, and go to Internet too.
But, if I setting the VLAN31 on Hyper Manager to some VM, it can take the DHCP and take the IP from SonicWALL for this VALN31, include DNS, GW etc...
But ... it just can ping internet, for example, ping www.yahoo.com it ok, but open IE, enter www.yahoo.com will super super slowly and time out, if running CentOS 6.5 Linux, enter yum update, it total not work, time out, 0.2kb/s etc. But it can ping to www.yahoo.com
no problems...
And If Windows run routert www.yahoo.com, over 10s to see next hub ...
I am double checked SonicWALL NSA2400 Firewall Policy is allow all VLAN and LAN to WAN, and VLAN TO VLAN too..
What is wrong on the Hyper-V VLAN? Do I am setting wrong of my switch port mode (Access/Trunking)?
I am now out of direction what is go on to troubleshooting this.
Thank you.

Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : JimmyChan-G6-01
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet 5:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 PT Dual Port Network Co
nnection #2
   Physical Address. . . . . . . . . : 00-1B-78-5A-B2-81
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet 4:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : HP NC382T PCIe DP Multifunction Gigabit S
erver Adapter #52
   Physical Address. . . . . . . . . : 00-26-55-23-1F-E2
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet 3:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : HP NC382i DP Multifunction Gigabit Server
Adapter #49
   Physical Address. . . . . . . . . : 00-26-55-1A-26-F8
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::1de6:509d:b011:775a%14(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.218.157(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.218.1
   DHCPv6 IAID . . . . . . . . . . . : 436217429
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-D3-8A-8D-00-26-55-23-1F-E0
   DNS Servers . . . . . . . . . . . : 8.8.8.8
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 PT Dual Port Network Co
nnection
   Physical Address. . . . . . . . . : 00-1B-78-5A-B2-80
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::acb8:319f:2c75:f829%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.101.11(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 218110840
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-D3-8A-8D-00-26-55-23-1F-E0
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : HP NC382T PCIe DP Multifunction Gigabit S
erver Adapter #51
   Physical Address. . . . . . . . . : 00-26-55-23-1F-E0
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{A9915F4B-84C6-4168-8E25-909FD2105BD9}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{E893BCF0-EA57-4E6D-8406-1B6ECF27A1C1}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
C:\Users\Administrator>
Above is the Server 2012 R2 Master Host (Mother)
But ... actually still have one Ethernet 6 NIC Card there, it also NC382i, buildin HP DL360 G6 NIC... This card is connect to the Cisco SG300 28 Switch and the Server, and make this card as for Hyper-V Switch (Extenal) ...
I don't why run ipconfig /all not see this card above ..
If you need Screen Capture, let me know ...
THX

TS1368 I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).

I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).

I have the same problem with my 3rd gen Apple TV. I can preview iTunes movies, stream from my Mac, Airplay from my other devices but I cannot rent a movie on iTunes. Every time I try I get "Can't connect to ITunes" and "Unable to sign in". Had technical support review the problem over the phone and they agreed to send me a new one. Same problem. Interestingly enough my 2nd gen Apple TV works just fine.

G4 Times Out accessing network

G4 times out and won't access secure wifi network- will access non-secure - have run update - was just given this I'm new to Apple computing

Hi Barry,
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1
Then click on Network>Airport & report this...
AirPort Card Information:
Wireless Card Type:          AirPort Extreme (0x14E4, 0x4318)
Wireless Card Locale:          USA
Wireless Card Firmware Version:          Broadcom BCM43xx 1.0 (4.170.25.8)
Original Airport cards came in 2 flavors, one needing a Firmware update to be able to do WPA, and neither able to ever do WPA2, only WEP or WPA TKIP, (not WPA AES).

Time Out - ODS to ODS

Hi Experts,
I am loading data from one ODs C1 to another ODs C2 with routines written in between these 2. loading of data works fine in dev but gives a dump : time out in quality ....
Runtime Errors         TIME_OUT
Date and Time          08.04.2008 09:41:12
Short text
     Time limit exceeded.
What happened?
     The program "GP4993111HUC1PPLV19LJVF0F7O" has exceeded the maximum permitted
      runtime without
     interruption and has therefore been terminated.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    After a specific time, the program is terminated to make the work area
    available to other users who may be waiting.
    This is to prevent a work area being blocked unnecessarily long by, for
    example:
    - Endless loops (DO, WHILE, ...),
    - Database accesses with a large result set
    - Database accesses without a suitable index (full table scan)
    The maximum runtime of a program is limited by the system profile
    parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
     time limit is
    exceeded, the system attempts to cancel any running SQL statement or
    signals the ABAP processor to stop the running program. Then the system
    waits another 60 seconds maximum. If the program is then still active,
    the work process is restarted.
How to correct the error
    Programs with long runtime should generally be started as background
    jobs. If this is not possible, you can increase the system profile
    parameter "rdisp/max_wprun_time".
    Depending on the cause of the error, you may have to take one of the
    following measures:
    - Endless loop: Correct program;
    - Dataset resulting from database access is too large:
      Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
      (for example);
    - Database has unsuitable index: Check index generation.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "TIME_OUT" " "
    "GP4993111HUC1PPLV19LJVF0F7O" or "GP4993111HUC1PPLV19LJVF0F7O"
    "R0011_A_CLINVDT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
     Display the system log by calling transaction SM21.
     Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
     In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
How to solve this error???
Regards,
Vaishnavi

Hi Vaishnavi,
The error itself provided u the required solutions to retify it.
How to correct the error
Programs with long runtime should generally be started as background
jobs. If this is not possible, you can increase the system profile
parameter "rdisp/max_wprun_time".
Depending on the cause of the error, you may have to take one of the
following measures:
- Endless loop: Correct program;
- Dataset resulting from database access is too large:
*Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table*
(for example);
- Database has unsuitable index: Check index generation.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TIME_OUT" " "
"GP4993111HUC1PPLV19LJVF0F7O" or "GP4993111HUC1PPLV19LJVF0F7O"
"R0011_A_CLINVDT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
you can try any of these methods.
Regards,
Rajkandula

Display Contract Times Out

Hi,
We are currently upgrading to SRM 5.0, SP6.
When I log in as a purchaser, and click on display contract under sourcing it takes some time to load and times out thereafter.
I am able to access the GUI frontend using transaction BBP_CTR_MAIN, it also takes some time to run but does eventually display the contracts screen.
Any help would be appreciated,
Many Thanks,
Doreen

Hi
<b>Please go through the follwoing SAP OSS Notes, which will definitely help -></b>
Note 1067227 - Timeout by executing standard include LBBP_PDLTXF04
Note 1046683 - SRM 5.0 SP stack 09(06/2007) SAPKIBKT09 release/info note
Note 980330 - BBP_CTR_MAIN: Performance during first call of transaction
Note 1017684 - Performance problem when accessing contract hierarchy
Note 819793 - SRM40-SUS: Fixed performance in forecast dely sched list
Note 830054 - Enable original contracts to be output repeatedly
Note 773276 - Correction report for BBPD_PD_INDEX
Do let me know.
Regards
- Atul

Management console-connection time out please help

after Composite environment installation,first time I am trying to open the management console. It throws a dialog window connection error. and in the text message connection to <host name and nr > failed.
In the exception message, i can see connection time out:connect
Here is the log
java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initStreamsFromSocket(HTTPSocket.java:648)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initializeStreams(HTTPSocket.java:470)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getOutputStream(HTTPSocket.java:427)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getRequestStream(HTTPTransport.java:355)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:548)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
     at com.sap.managementconsole.soap.sap.sapcontrol.SAPControlStub.getInstanceProperties(SAPControlStub.java:1248)
     at com.sap.managementconsole.dataloader.soap.sap.SAPSOAPDataLoader.getInstanceProperties(SAPSOAPDataLoader.java:823)
     at com.sap.managementconsole.dataloader.soap.sap.SAPSOAPDataLoader.<init>(SAPSOAPDataLoader.java:87)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at com.sap.managementconsole.common.SapControlInterfaceFactory.getControlInterface(SapControlInterfaceFactory.java:91)
     at com.sap.managementconsole.common.DataLoader.createControlInterface(DataLoader.java:313)
     at com.sap.managementconsole.common.DataLoader.startup(DataLoader.java:232)
     at com.sap.managementconsole.common.DataLoader.access$100(DataLoader.java:64)
     at com.sap.managementconsole.common.DataLoader$1.execute(DataLoader.java:437)
     at com.sap.managementconsole.operations.AuthorizedOperation.execute(AuthorizedOperation.java:38)
     at com.sap.managementconsole.common.DataLoader.reinitialize(DataLoader.java:444)
     at com.sap.managementconsole.common.DataLoader.run(DataLoader.java:542)
     at java.lang.Thread.run(Unknown Source)

Hello,
Can you post the std_server0 log ?
Regards,
Siddhesh

Auxiliary instance connection time out

Hi Experts,
I am creating a duplicate DB on oracle 10.2.0 on XP on a remote host.
first host (suman)is source and the second host(sumanr) is target means duplicate. in 2nd host i have installed the oracle software, created the pswd file, pfile, the instance and started in nomount. In 1st host DB is opened and running, now I am trying to connect to the 2nd host instance but getting following error..
RMAN> connect target
connected to target database: ORCL (DBID=1255758361)
RMAN> connect auxiliary sys/oracle@stby
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04006: error from auxiliary database: ORA-12170: TNS:Connect timeout occurredthe host string 'stby' is to connect to the 2nd host DB.
I have not mentioned any time out parameter in sqlnet.ora
Any help will be appreciated
Rgds

Always try to clone from Aux instance. as
rman target sys/****@orcl auxiliary /
Error:     ORA-12170 (ORA-12170)
Text:     TNS:Connect timeout occurred
Cause:     The server shut down because connection establishment with a
     client failed to complete within the allotted time interval. This
     may be a result of network/system delays; or this may indicate
     that a malicious client is trying to cause a Denial of Service
     attack on the server.
Action:     If the error occurred because of a slow network/system,
     reconfigure the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in
     sqlnet.ora to a larger value. If a malicious client is suspected,
     use the address in sqlnet.log to identify the source and restrict
     access. Note that logged addresses may not be reliable as they can
     be forged (e.g. in TCP/IP).

MDM Console - Time Outs

Hi All,
I am experiencing a strange behavior in the MDM Console. All actions are taking very long and finally time out (a popup window comes up). I am using MDM 5.5 SP06 (WIN32) and SQL Server 2005.
What could be the reason for this? Any help is appreciated.
Thanks and Regards,
Ingo

Hi,
Thanks for your help! The problem was the SQL Server, in the MDM server log I could find some OLEDB-connection problems:
3272 2008/06/03 18:11:46.093 Error: OLEDB error on / from statement:
3272 2008/06/03 18:11:46.093 Error: ErrorRecord->HResult/NativeErr: 0x80004005/0
Description: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server existiert nicht oder Zugriff verweigert.
Source/File/Line: Microsoft OLE DB Provider for SQL Server/..\..\..\Database\A2iDbConnection\OLEDB_DBConnection.cpp/295
I was running it on my local machine, no dedicated server for this. Could be that the installation of MS Access messed up my SQL Server, I wasn't even able to connect to it using the MS tools. Now I got the DB back up and running, everything works fine.
Kind Regards,
Ingo

Accessing Source times out

Similar Messages

Maybe you are looking for