Accessing The Chooser In Os9 Classic
How does one access the chooser to change the printers in os9 classic from
panther? (assuming the computer is NOT dual bootable in 9)
basically I want to be able to switch from 2 different OS9 printers
You could make an alias to the Chooser, or just access the Chooser in the Apple menu when your OS 9 application is running.
Similar Messages
-
Is it possible to remotely access the desktop in OS9.1 from a newer G5 mac?
I have an old 7600 Powermac running OS9.1 and several peripherals on the SCSI bus. I would like to be able to access this machine and the peripherals via my newer G5 machine. So I'm wondering if its possible to remotely access the desktop on the OS9.1 machine with the existing software or do I need some type of network administrator software? Thx in advance!
7600 Mac OS 9.1.xYes, there are several remote access apps in the app store. LogMeIn, TeamViewer, and others.
Search the app store and find what works best for you. -
On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...
The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar. -
I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
What is the best way to have access to OSX and OS9 from the same machine?
What is the best way to have access to OSX and OS9 from the same machine?
Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
G5 Mac OS X (10.4)And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X
-
Classic Report not retrieving when accessing the first time
I have two classic reports on two separate tabs and the first time that I access the tabs, the report does not retrieve. However, if I tab off and then back onto the tab, the report will retrieve.
Any idea why these two tabs are not retrieving when initially accessing the tab?
I have several other tabs in the same application that retrieve properly when initially access them.
Thanks,I think I remember something like that happening to me because there were variables that were not initialized properly that the report used.
-
In the previous version of Firefox one could choose to save tabs so that when Firefox opened, all the tabs from the previous sessions appeared. This was done in Settings > Options > General > Startup. In the menu for the "When Firefox Starts" one had the option for "Windows and tabs that where opened last time you accessed the net." in Firefox 5.0, this menu is gray and not clickable. Help, please?
''Why are the options for "When Firefox starts" NOT clickable in Firefox 5?"
Possibly you are not saving your "browsing history" which is what the session history is tied into.
'''Not saving History''' -- check your settings for '''Tools > options > Privacy'''', make sure you are not clearing more than just cache in "Settings for Clearing History"
* http://img232.imageshack.us/img232/4928/clearcachew.png
* clearing your history at end of session, cache is the only one you would want to clear at end of session, if you don't want to lose things
There are several things that are related to private browsing and not saving History
* Private Browsing Ctrl+Shift+P
* You selected "Never remember history" in first drop-down of Tools > Options Privacy and all of the check marks disappear (See picture above)
* "Permanent private browsing mode" was check-marked under "Use custom settings for history" in the first drop-down of Tools > options > Privacy (see picture above) -
trying to download an app, I'm instructed to choose from my user folder, but the choose tap cannot be accessed, what do I do
help
-
hello
I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifiRead here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware issue. -
ICC profile no longer installed so Photoshop (OS9 Classic ) won't print
Hello everyone
What is an ICC profile? If I run my non latest Photoshop in the OS9 Classic environment on OS10 a message comes up that the ICC profile is no longer installed so it cannot print - what can I do?
BryonyAn ICC profile is a mathematical snapshot of the color range and gamut of a given device. There are separate profiles for monitors, digital cameras, scanners, printers, etc. With this information, ColorSync knows what each device is capable of displaying, capturing or printing. As an example, it can then give you the closest color possible on your printer to match your monitor.
With Photoshop open, press CommandShiftK to call up the Color Settings. Under the Working Spaces section, see what profiles Photoshop is looking for under the RGB and CMYK fields. You should then find that profile in the OS 9 /System Folder/ColorSync/ folder. Actually, it doesn't mean it's there, but that's the one Photoshop is looking for.
You could choose a different profile. Or, you could reinstall Photoshop entirely, or do a custom install and have it only reinstall the ICC profiles. -
why is it that when trying to use a back up of my old iphone i click on devices and the options are all frey scaled? I cannot access the restore and back upo options
Let me start with the general advise...
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help? -
How do I enable multiple profiles to access the same itunes library?
Family of 4; with 4 different user profiles/log ins. One family iTunes library; how can I allow all profiles to access the one master iTunes library?
annafromsalt lake city wrote:
how can I allow all profiles to access the one master iTunes library?
move the entire iTunes folder to <MacintoshHD>/users/shared. on each user account, launch iTunes while holding the option(⌥) key, click on choose library when prompted, and select the iTunes folder you moved to the share folder.
be aware only one iTunes at a time can access the library ! -
How to access the Web Service Browser
Hi,
I need to access the Web Service Browser to generate a Web Service Description.
How can I do it?
I use the follow url:
http://<host_name>:<port_number>/sap/bc/bsp/sap/WebServiceBrowser/search.html?sap-client=<relevant_client>
but I can't say how to determine values for the three placeholders.
Help me please.
THANKSHi Andrea,
you can access the web services in sap transaction SICF. Then right click on the
service and choose "test". The hostname is the host on where the sap system
runs.
The port ´number can be seen in transaction SMICM -> shift + F1. Here you can see
the portnumer assigned to the HTTP protocol.
And the client is the sap client (standard client) for which the service is configured.
Hope this helps.
KR,
Andreas -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.
1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2
Maybe you are looking for
-
Hi I am thinking of using a Mac Pro for share trading. I am proposing to start small but want to be able to expand up to 30+ monitors. It must be super quick. Any help with hardware would be appreciated. Software is secondary at this point , but open
-
Unable to open the adobe form in NWDS
Hi, I could not open a pdf form which is developed in NWDS. Its throwing the following error stack...Can anyone help me out on proceedings over this? Any ideas what can be the problem? javax.xml.rpc.soap.SOAPFaultException: Exception in method rpDat
-
Problem to accept call.........
Frnds I have a problem with my 5800 xpressmusic plz suggest me to solve the prob...... I can't accept any call, can't stop alarm, can't stop reminder, can't stop to do note, can't unlock phone by tapping the unlock button when keypad is lock in versi
-
User Exits/BADI's in HR Mater Data PA30
Hi, Hi, When ever the Personnel's Qualification is Updated in PA30, I need to capture the Information and store it in a Custom Table to keep track of the change history information to create a report with micro level information like Qualification, T
-
Hi I have a scenario like from SAP-XI-mainframe..My question is this poosible to send the data with out Interface mapping venkat