Accessing the Condition Tables

Hi,
I have a situation here. I am fetching the Price Data from the Condition master data tables. I am getting data from T685,T682I and T682Z tables. Now, when I am getting the field T682Z-KOZGF, it gives me a value "A001" for KAPPL = 'V' and KVEWE = 'A'. Now, I need to access the condition table A001 and access its fields like DATAB and DATBI. How do I do that? Can somebody help me with this?
Also, I would like to access the field ZIFNA which will give the values "VKORG", "VTWEG" ,"SPART","KUNNR". I would also like to Check these values with the Same input fields I have. How do I achieve that? Please help me with this.
Thanks,
John.

Hi Prabhu,
Thanks for your quick reply. In fact, I am developing a BAPI function Module in which I am sending pricing scales to the external interface. For the same reason, I have to access the condition tables to find out the pricing scales. So, please help me find out the procedure to access the condition table (ex: A001) which comes as a value into my internal table.
Thanks,
John.

Similar Messages

Populating the condition tables

hi ,
can anyone explain me clearly ,how to populate the condition tables programatically.
its really urgent.
regards,
srikanth tulasi.
Edited by: srikanth tulasi on Apr 9, 2008 11:02 AM

Hi Prabhu,
Thanks for your quick reply. In fact, I am developing a BAPI function Module in which I am sending pricing scales to the external interface. For the same reason, I have to access the condition tables to find out the pricing scales. So, please help me find out the procedure to access the condition table (ex: A001) which comes as a value into my internal table.
Thanks,
John.

I'm facing performance issue while accessing the PLAF Table

Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
    SELECT plnum pwwrk matnr gsmng psttr FROM plaf
    INTO CORRESPONDING FIELDS OF TABLE it_tab
    WHERE matnr IN s_matnr
      AND pwwrk = p_pwwrk
      AND psttr IN s_psttr
      AND auffx = 'X'
      AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
Jessi

Hi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1     (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system

PR00 Access sequence Condition table changed

Hi Friends,
Someone changed the PR00 Access Sequence Table Settings..
It shows as
Ac   Tab   Descripion     Reqirement     Exclusive
5     305   cus/mat                                      checked
10   5       cus/mat                                     checked
20   6       price/cur/mat                               checked
30   6       price/cur/mat                               checked
40   4       material                                       checked..
Please tell me the actual Tab Setting and Acc Sequence.. My system is not moving further
Thanks

Hi
The access sequence for PR00 is PR00 or PR02
the condition tables in PR00 is as folows :
Customer / Material
Price list / Currency / Material
Material
For PR02 access sequence, Try to copy the condition table 304,305and 306 condition tables this will solve the problem
Reward if useful
Regards
Srinath

Need to add new fields to the condition table

Hello All,
The requirement is to create the new condtion table for MM containing the following fields and maintain the entries in this table:
- client
- characteristic
- class
- internal characteristic.
THe condition tables are created via tcode M/03 or through the customizing path
Material Management > Purchasing > Conditions > Define Price Determination Process > Maintain Condition Table.
The problem which i am facing is as follows :
-SAP has the standard procedure for the generation of the condition tables . Selected fields are made available by SAP in the field catalog and we can select only from the those available fields. Once we select the required fields the condition table is automatically generated in the background.
-As the requirement is, we need to have 4 fields in the generated condition table (client, characteristic, class and internal characteristic), but the problem is that none of these fields are available in the field catalog which is provided by SAP (in tcode M/03, M/04 and M/05).
-Designing of the Z table wonu2019t be useful as we would not be able to use the Z table as the condition table.
Can you please suggest how can we add the desired field to the existing field catalog in M/03 or is there any other alternate solution to this ?
Thanks in advance for your help.

>
Rinkesh Doshi wrote:
> Hello,
>
> The specific ABAP question which I have is :
>
> Is there any way in which we can enhance the existing field catalog in M/03 tcode to include the 4 new fields (client ,characteristic,class,internal characteristic) ?
>
> Thanks.
Please post your code which you developped until now and show us where the problem is. I cant see any ABAP related question.

How to find out the query is accessing the DB tables or not

Hi Gurus ,
How to find out the query is accessing the DB tables or not.
Where exactly we will find this information in SAP BW.
I know that this information we can find in ST03. But where exactly we will find the query information along with DB information?

Lakshmi
Activate BI Technical Content for Query analysis and run query against that.
Hope this helps
Thanks
sat

Adding custom fields to the condition table in CRM

Hi all,
Our requirement is to download the sales conditions type from R3 to the CRM system. In one of the condition table we are trying to add shipping point( VSART ) and Special processing indicator (SDABW).
For that we have added the fields in the structure CND_MAPT_ACS_REM_CUST (Comm. Structure Condition Exchange Customer Exit R/3 Fields) and we have added the fields in the field catelog in transaction ( /SAPCND/CTCT - Maintain Condition Tables). Then we have mapped these fields in the view V_CND_MAP_CNVFLD.
Finally we run the adapter object of that particular table to download the details from R3, but the condition table in CRM is not getting activated, so the adapter object is giving the error.
Please help in this.
Thanks & Regards,
Raghuram.

Hello Raghuram,
I feel that your issue is similar what i have faced, refer to my post:
Link: [Issue in customer specific price;
For solving this you can refer to detailed steps in, Note 514952 - Download of customer-specific tables.
Also additionaly you may need to run the report /sapcnd/rv12n001, as i also had to do so.
If not solved then let me know the relevant message in SLG1
Regards

How to Access the XI_AF_MSG table

Hi Experts,
I request you to please let meknow that how can I access the different JAVA tables like XI_AF_MSG table or the AUDIT tables.
Actualy my requirement is to trace the audit log for a particular message ID in the Adapter Engine.This audit trace is not same as the audit log that found in the PI7.0 Runtime WorkBench.For exmaple.--
a message failed in the adapter engine after successfuly processed from PI Integration Engine. Now I want to trace the USERID by whom the message is resent or canceled.
please let me know how can I achive this and how can I access the different tables in JAVA layer.
Thanks
Sugata Bagchi Majumder

These 3 are the tables that are for XI Adapter in ABAP Stack.
SWFRXICNT
SWFRXIHDR
SWFRXIPRC
You can also try the following tables.
SXMSAEADPMOD                   XI: Adapter and Module Information
SXMSAEADPMODCHN                XI: Adapter Module Chains
SXMSAEAGG                      XI: Adapter Runtime Data (Aggregated)
SXMSAERAW                      XI: Adapter Runtime Data (Raw Data)
Cheers,
Sarath.
Award if helpful.

Condition Price to be picked in GR from the condition table MEK1

Dear All,
I have a requirement like
I have 3 different condition type say ZPBS,ZSPL,ZADD.I have maintained these condition with a new acess seq.For these conditions i maintained some fixed value in MEK1,say 500,20,10 respectively.
After that i did a PO with these conditions with the condition table value say 500,20,10 i.e 530.But after that i changed the value to 600,30,20 say 650.Prior to that i have changed the condition control to "GR date-5" in PO item.
So after that i did the GR,the value of GR is coming as 650.
My requirement i want the condition table value 500,20,10 i.e 530 is to be come after doing the GR.
So pls suggest any specific solution if possible for this.
Regards,
DD

Hi,
Make date valid check (From & To) in MEK1 for the Values so that based on the valiadity it will be process for GR.
pherasath

Retriction of access the custom table

Hi Experts,
    I created a custom table. Here I have 5users. the first 3 user want to access the custom table in change mode. the remaining 2 users want to see table in diplay mode only.
    But here SAP is allow access the table in change mode only to one user. Is it not possible to do this one to multiple users?
   Please tell me.
Thanking you.

Hi,
Here lock concept comes into picture, as you are saying like 3 users in change mode where if one is editing the records and if another opens then obviously table locks. Check this and ask your Basis guys for the authorizations setting like for 3 users change action and for the another 2 users display action.
Cheers!!
VEnk@

Accessing The External Table using UIAPI and DIAPI

Hi Every One,
can any one tell me about , can we access the external table data that is created by using sql query externally using UIApi and DIAPI
Regards
Srinivas

Hi,
technically is it possible, but all inserts and updates have to be through query.
Note, that when you create tables from sdk, you can set more informations about fields than in sql query manager (for example subtype) - so you may have problem in binding data to matrix for example. So if you have table externally, you may work with, but this isn`t allowed by SAP (and I think that this case may be dangerous if you acces it in sdk). If you need to acces it on sql server side (own numbering, some stored procedure, ..) it will works safer, but it is not allowed as well.
Petr

How to populate the condition tables of CRM 7.0

Hello Friends,
How to populate values in CND* tables , i assume these are the tables that hold the conditions.
Thanks and Regards,
Vasu

Hi,
if you refer to CND* tables those are tables involved in the condition master data exchange between ERP and CRM (on CRM side). Actual condition tables for pricing related condition records start with CNC*. In the help there is a documentation of the condition master data tables for pricing available: http://help.sap.com/saphelp_crm70/helpdata/EN/0e/91f9392486ce1ae10000000a114084/content.htm
Hope this helps.
Best Regards,
Michael

Field catalog not appearing in the condition table for output determination

Hello,
I wanted to include WBSTK as a condition table entry in the output determination for outbound deliveries, WBSTK is available as field catalog , but not available during condition table creation.
Can you pls help me out?
Regards
Vaidee

Check OSS Notes
379619 - Preference process in SD order: Prefrnc ID missing
595984 - Preference indicator in SD order
379269 - Preference in SD doc: User exit: Set pref. indicator PREFE
Regards

How to access the database tables from application

Hii all,
The information in webcenter content, such as meta data fields, users, security groups etc are stored in
database tables like- Revisions, SecurityGroups, Users, DocType etc..
Can we access this tables from an adf application or any webcenter application..
If yes, then what can be the approach for that..??
Another things, how can we create custom tables just like the predefined tables...??
Any information regarding this.??
Thanks

Can we access this tables from an adf application or any webcenter application.Yes, you can - like to any other existing database. But I would strongly discourage you from any, but read-only access, or you can easily end up with inconsistent data.
If yes, then what can be the approach for that..??Just create a database connection and define in your model what tables you want to access.
Another things, how can we create custom tables just like the predefined tables...
Actually, WebCenter Content provides functionality of creation of custom tables (see http://docs.oracle.com/cd/E23943_01/doc.1111/e10978/c04_metadata.htm#autoId2 ) and these are probably the only good candidates for read-write access. See further in the manual what use cases are supported. Of course, you could do this even externally, but rather than Data Definition Language, I'd use services (if there are some).

Error in generating the condition table.. pls help urgent

Hi all,
I have some condition tables to be generated in CRM from ECC.
i am getting the following error for 2 tables : " Generation for application CRM, Usage PR and table CUS601 failed".
But other tables data has been corectly downloaded from ECC to CRM.
I m checking the status in SLG1. and i use tcode : CND_MAS_GEN_OBJECTS.
Kindly help me this,
its very very urgent.
points will be rewarded.
Robin

thanks rajesh for ur reply.
Basically the issue is like this now.
Im trying to download the confition tables data from R3 to CRM. so in CRM...
when i manually try to start initial download the object for a table by R3AS, tcode..
the bdocs are been in intermeditate state in CRM. with yellow.
when i try to reprocess it is throughing a short dump( reason telling : already a record is been availble in table : CNLCRMPRSCALEDIM, trying to insert again.
So m not understanding what the issue would be..
Could you please help me with this. im really in dead situation.
it is working for other tables
Robin

Accessing the Condition Tables

Similar Messages

Maybe you are looking for