Accessing the Editor

I have been using Photoshop Elements 5 for a few years without problems but now I can not go from the organizer to the editor ..... I get a message saying it is an invalid address and can not connect to the editor. Any ideas on this one.

1carver10 wrote:
I tried all the suggestions but none seem to work ..... I have tried to hold down Ctrl-Alt-Shift keys to set the preferences but that option does not come up.....I have held the keys at various times from simultaneously to waiting a bit..... I tried to set the open screen to editor and now nothing opens and I cannot even get into organizer.
If I uninstall Photoshop and reinstall, I presume that will work but will I lose all the editing and tagging I have done.
Any suggestions you have would be great.
Thanks
Richard
Richard,
No you would not loose the editing and tagging by uninstalling and reinstalling.
In order to help identify how you can delete the Preferences using Windows Explorer, please post which version of Windows you are running. Then you can delete the Preferences first before trying an uninstall and reinstall.
I tried to set the open screen to editor and now nothing opens and I cannot even get into organizer.
Sorry, my intent was for you to choose the Editor but not to set it permananetly. In any case we will proceed based on your current status.

Similar Messages

Help,Intermittent problems accessing the Editor in Elements 10

Sometimes when I try to access the Editor,either from the Organizer or directly, it will let me in and I can then edit several images, without any problems. Then without warning it fails, and I cannot access the Editor in any of the editing Modes. The only way I have been able to to overcome the problem is to come out of Elements and Reboot my PC, then re enter Elements and start afresh.
I am using a Sony Vaio PC with wndows7 Home Premium, and AVG security. I have also fairly recently installed a Bambo Pen and Touch tablet, but I think the problem stems back from before that installation.
I am not very "computer literate" but any help or suggestions will be much appreciated.
John.

Try this:
Bypass the Unwelcome Screen by creating Desktop shortcuts for the Organizer and the Editor, and restarting your computer.
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
The Unwelcome Screen leaves a zombie process running which prevents the actual program from launching again.
Ken

Unable to access the Editor module?

We have a pc running VISTA and IE 7. We are unable to edit or create a Business Objects document on this machine. The Editor window opens and starts to load but then hangs up on the "Displaying the Document" message.
The main Business Objects window loads fine and we can run existing documents but cannot edit them.
This is the only pc we have running VISTA and are thinking it is a VISTA issue of some kind.
We have JAVA enabled along with cookies and there shouldn't be any Administrator rights issues.
We are running Business Objects- Web version 6.5
Any help would be appreciated! Thanks.

Is there anything special to be taken care of when using multiple AMs in the same workspace?
I ask this Question because its quite strange to get oracle.jbo.common.ws.WSApplicationModuleImpl as the return type inspite of my Action class extending oracle.adf.controller.struts.actions.DataForwardAction

How do I access the Photoshop Elements editor inn Premier Elements 12?

I am unable to access the editor tools for editing photos in Premier elements 12.

Hi,
I think that you may have tried signing in to photoshop.com which no longer exists.
Please see if this document helps.
http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/
Brian

How do you start the Editor Application

I am experiencing difficulty in opening the Editor Application. I can only open the Tutorials. I am able to oprn the Organiser Application. So now I am wondering if I need to fill the organiser with photos before I can access the Editor Application. Any advice would be useful.
Many thanks
Scots

No, the organizer is totally voluntary. I'm not sure what tutorials you mean, but if you are using a mac (I'm guessing that since you say "application") and PSE 12 (also guessing since you don't say much) it's in Applications>Adobe Photoshop 12>Support Files>Photoshop Elements Editor.

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

How do I access the Quicktime video editor in iMovie?

I'm trying to access the Quicktime video editor (the one that allowed you to sharpen your videos, among other adjustments) that used to be there in iMovie. I'm running iMovie 10.0.5 on OS X Mavericks 10.9.5 and can't seem to find it.

The latest incarnation of iMovie doesn't offer the 'Export with Quicktime'-options, the previous versions did.

I am using Vista (64) and Photo Elemnts 7 to access. When I try to load the "Editor" regarding any

I am using Vista (64) and Photo Elemnts 7 to access. When I try to load the “Editor” regarding any photos from “Organizer” I get the message “Runtime Error!
Program:,,,,Adobe\Photoshop Elements 7.0\PhotoshopElementsEditor.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.”

You have the latest release version of Firefox, ignore those prompts from Yahoo about updating. They're trying to entice you to install their special "Yahoo enhanced" build of Firefox, that has extras which many people consider as being Malware.

I have been using pse11 on wondows vista and it has certainly started freezing on starting and I am unable to access the organizer, the editor is ok. Have removed and reinstalled but is the same have changed the files as suggested. Have been unable to ope

I am using pse 11 0n windows vista for years and it has suddenly started freezing on starting, I am now unable to access the organizer it freezes on the blue screen, the editor can be opened. Have removed and reinstalled but is still occurring. Have changed the files as suggested, am unable to open as administrator

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Why can't I access Photo Editor. When I click on it, it kicks me off the Elements start screen?

I was having trouble accessing Photo Editor from the start screen of Elements. When I click on "Photo Editor" it kicks me out of the program entirely. Yet, when I click on "Organizer" it opens. What can I do? After I configured my monitor, I was able to access Photo Editor, but then it has gone back to NOT accessing it. Anyone have an answer?

Try a reset. Next try deleting and reinstalling app.

Access the Name and Value of a StationGlobals container programatically

Hello,
I am having some trouble trying to programmatically write the contents of a container into my HTML report header. The container contains a series of strings and numbers. These are saved into StaionGlobals.
Note that I am performing all of these operations in a statment step inside the sequence editor of TestStand
I used the following method to access the correct property, which sits inside a for loop. Now this seems to work fine as Locals.PropertyObj contains the element which I wish to access. In the following Locals.PropertyObj is an object. TestSetup is the name of my setup information container
Locals.PropertyObj = StationGlobals.GetNthSubProperty("TestSetup", StationGlobals.ForIterator, 0)
I can access the Name of the parameter simply by using the following code (where Locals.Name is a string):
Locals.Name = StationGlobals.GetNthSubPropertyName("TestSetup", StationGlobals.ForIterator, 0)
However when I try to access the actual value of the parameter I get an error or the wrong information. The following line gives me back the value "PropertyObject, IID = {8D87....}" which is not the value I am trying to get to.
Locals.Val = StationGlobals.GetNthSubProperty("TestSetup", StationGlobals.ForIterator, 0)
I must be doing something wrong, and have tried various methods to do this but cannot get my head around the problem. I tried to use the following also, but it resulted in an error:
Locals.PropertyObj.AsPropertyObject.GetFormattedValue((Locals.PropertyObj.AsPropertyObject).Name, 0, "", False, "")
Note that the following line works fine:
(Locals.PropertyObj.AsPropertyObject).Name
Also can you tell me why the lookup string needs to be defined in Locals.PropertyObj.AsPropertyObject.GetValueString(), is there a way to not require the lookup string as you are already have the correct property, and just the value is needed to be gotten.
One last thing, in Evaluate() how do I make it work with dots, for example the following line (another attempt to get the value) did not work due to the presence of the . character
Evaluate("StationGlobals.TestSetup." + (Locals.PropertyObj.AsPropertyObject).Name)
Many thanks in advance of your response,
Ben Lawler
ps. hope that I am not being stupid and missed something very obvious

Ben,
Just a few comments;
[Locals.PropertyObj = StationGlobals.GetNthSubProperty("TestSetup", StationGlobals.ForIterator, 0)]
This should give you a PropertyObject for the 1st subproperty of StationGlobals.TestSetup if StationGlobals.ForIterator = 0
[Locals.Name = StationGlobals.GetNthSubPropertyName("TestSetup", StationGlobals.ForIterator, 0)]
This should give you the name of the 1st subProperty of StationGlobals.TestSetup if StationGlobals.ForIterator = 0
[Locals.Val = StationGlobals.GetNthSubProperty("TestSetup", StationGlobals.ForIterator, 0)]
This is going to return the 1st subproperty of StationGlobals.TestSetup if StationGlobals.ForIterator = 0 as a PropertyObject reference
and Locals.Val should be an ActiveX Reference type which I am guessing it isn't.
[Locals.PropertyObj.AsPropertyObject.GetFormattedValue((Locals.PropertyObj.AsPropertyObject).Name, 0, "", False, "")]
I think this should be Locals.PropertyObj.GetFormattedValue("", 0, "", False, ""), you dont need to specify the lookup string because you have obtained a reference to the actual sub-PropertyObject.
and therefore
Locals.Val = Locals.PropertyObj.GetFormattedValue("", 0, "", False, "")
should give you the value of the 1st subproperty of StationGlobals.TestSetup if Locals.PropertyObj was obtained as above.
I will try to check out your sequencefile later when I have access to TestStand 4.x.
Regards
Ray Farmer
Regards
Ray Farmer

How do I access the DCJMS* variables in my response SOAP:Header ?

Hi all,
I have set up a sync / async Integration Process in XI
This is initiated by a SAP R/3 transaction that calls a synchronous function to enter XI
Once in the Bridge, a JMS receiver adapter sends out an asynchronous request message from XI to MQ
A correlation allows the JMS sender adapter to return an asynchronous response message from MQ to XI back into my the Integration Process
I have set up the JMS sender adapter configuration to return the DC (dynamic configuration) variables in the <SOAP:Header> of the XI response message along with the payload
You can see that the DCJMS* variables are returned below
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
+ <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
+ <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
+ <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
+ <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
+ <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/JMS" name="DCJMSCorreleationID">40D982A0-B19D-11DB-9508-0002A5D5916B</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/JMS" name="DCJMSTimestamp">1170297456940</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/JMS" name="DCJMSMessageID">ID:414d5120514d4430312020202020202045c12b962001dd02</SAP:Record>
</SAP:DynamicConfiguration>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information
Question
I want to access the DCJMS* variables but am not sure how to go about it as the
variables exist in the <SOAP:Header>?
I followed the SAP documentation to access adapter-specific attributes (refer to link http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm )
I have used the following code to create a user-defined function for the accessing adapter specific attributes (similar to the link)
public String Get_Msgid(Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get
(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create
("http://sap.com/xi/XI/System/JMS","DCJMSMessageID");
String jmsMsgID = conf.get(key);
return jmsMsgID;
Question
Do I use message mapping to extract the DCJMS* variables?
Question
If so then which message is used for the source message so that I can access the <SOAP:Header>? Eg do I use the response message type or is there a trick to accessing the SOAP:Header?
Question
Do I use the user-defined function (like above)?
I performed the following steps
 Opened the message mapping in edit mode
 Created the user-defined function using the graphical editor
 Saved the message mapping
 I have not connected the user-defined function to any of the xml tags in either the source or target messages
When I go to test the message mapping I am getting the following error
Compilation process error : CreateProcess: null\bin\javac -J-Xmx256m @E:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapd79a7bf0b65611dbaf390002a5d5916b/O1170817003886.txt @E:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapd79a7bf0b65611dbaf390002a5d5916b/S1170817003886.txt error=2
STACKTRACE:
com.sap.aii.ib.core.mapping.exec.ExecuteException: Compilation process error : CreateProcess: null\bin\javac -J-Xmx256m @E:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapd79a7bf0b65611dbaf390002a5d5916b/O1170817003886.txt @E:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapd79a7bf0b65611dbaf390002a5d5916b/S1170817003886.txt error=2
at com.sap.aii.ib.server.mapping.exec.ServiceUtil.compileSourceCode(ServiceUtil.java:207)
at com.sap.aii.ib.server.mapping.exec.ServiceUtil.compile(ServiceUtil.java:156)
at com.sap.aii.ibrep.server.mapping.ServerMapService.compileSourceCode(ServerMapService.java:361)
at com.sap.aii.ibrep.server.mapping.ServerMapService.compileSourceCodeWithoutAndWithArchives(ServerMapService.java:301)
at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:153)
at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52)
at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.execute(MapServiceRemoteObjectImpl0.java:259)
at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:146)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
A thread in the SDN (Error while Activating Message Mapping, Posted: Jan 9, 2007 3:32 PM) suggests checking the java path on the XI machine
This is JAVA_HOME=C:\j2sdk1.4.2_08 and seems ok
Question
Do you know why I would get the compilation error?
Any assistance would be appreciated
Regards,
Mike

Jin,
My compilation issue has gone via a SAP recommendation to specify the JDK home directory in the instance profile
Back to the mapping - I can now run my scenario
Source message
The response message has the following <SOAP:Header> from which I want to extract the DCJMSCorreleationID (note that it's misspelt)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/JMS" name="DCJMSCorreleationID">40D982A0-B19D-11DB-9508-0002A5D5916B</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/JMS" name="DCJMSTimestamp">1170297456940</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/JMS" name="DCJMSMessageID">ID:414d5120514d4430312020202020202045c12b962001dd02</SAP:Record>
</SAP:DynamicConfiguration>
Grahpical mapping
LHS - Response message with occurrance 0..1 so it is not connected to my UDF
UDF Get_Corrid with no inputs
RHS - The UDF output is connected to the Acknowledgement msg tag <ACK>
UDF
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get
(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create
("http://sap.com/xi/XI/System/JMS","DCJMSCorreleationID");
String Corrid = conf.get(key);
return Corrid;
Target message
The idea is to copy the correlation id of the response message into the acknowledgement message. But as you can see the result is NULL
<?xml version="1.0" encoding="utf-8" ?>
- <ns2:AWB0020_MARKET_DATA_RESPONSE_ACK xmlns:ns2="http://awb.com.au/mq/tx/MarketData">
<ACK>null</ACK>
</ns2:AWB0020_MARKET_DATA_RESPONSE_ACK>
Please advise
Thanks Mike

Cannot display the folder. Microsoft Outlook cannot access the specified folder location.

Hi, guys
I cannot view delegate mailbox in Outlook. Following is my configure.
I have two mailbox A-User and B-User
Login Outlook as A-User, click File -> Account Settings -> Delegate Access, add B-User and give Editor permission of Inbox.
Right click A-User's root inbox and select Properties -> Permission, select B-User and check "Folder visible".
Login Outlook as B-User on other computer, click File -> Account Settings -> Account Settings, select B-User and click Change -> More Settings -> Advanced, add A-User.
Now I can see a root A-User in Navigation Pane. But when I click it, it shows
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location."
or
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location. The operation failed. An object cannot be found".
I searched some solutions from internet, but all of them don't work. Could you give some suggestions?
Thanks.

Hi,
First, please double check if you have given the right permission to B-User on your step 2.
In addition, we can try to give a higher permission to the B-user to check the result.
Please feel free to post back and let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?

-------------------------------------------------------------------------------------------------------------------------------------------
How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?
Is there a recent known problem with the about:sessionrestore command or is there any other way understandable to Firefox 29.0.1 through which recover the information stored in the sessionstore.js files.
It seems the command about:sessionrestore is not capable anymore to read the contents of the sessionstore.js file present in the user profile folder.
The box where windows and tabs should be listed is empty.
I tried to paste a few old sessionstore.js files in the user directory while the firefox.exe process was not active, then opened Firefox again and tried to launch the about:sessionrestore command without any result.
I think the files are not corrupted because I used most of them in other occasions and I stored them in folders not connected to the common use of any process.
Also, I already successfully used the about:sessionrestore command in Firefox 29.0.1 in a few other occasions.
I did a "clean reinstall" of Firefox 29.0.1 and the box contained in the tab where about:sessionrestore is executed is still empty even if the files themselves contain such information as tabs location and html addresses.
After this I recovered the profile data I had stored in another folder and this is what you can see attached to this question.
---------------------------------------------------------------------------------------------------------

If I select the "show my windows and tabs from last time" option in the startup settings the contents of any savestore.js file i paste in the user profile folder are opened without any problem.
still, the box in the tab loaded by the about:sessionrestore command is blank and empty, so it's not possible to "de-select" any window or tab. it's necessary to find an editor to modify session backup files which may contain "bad addresses".
does such an editor already exists?

How can I access the "vision info" in an image

Hi,
Development Environment:
LabVIEW 2012 32-bit (12.0f3)
Vision 2012
Description:
I would like to get more information regarding the "vision info" in an image.
There is a VI called IMAQ Is Vision Info Present 2 - which tells me whether any vision info is present in the image.
But then what can I use to read or access this vision info, aside from using IMAQ Read Custom Data - or is this all there is?
ie. I have created a template in Vision Assistant using the Template editor and highlighted some mask areas - how can I open this up in LabVIEW and get this information?
The Vision help files don't seem to define this to a low level of detail.
Thanks!
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.au
Solved!
Go to Solution.

Hi Christopher,
Have you tried our IMAQ Get Geometric Template features VI? Information on this VI can be found here: http://zone.ni.com/reference/en-XX/help/370281P-01/imaqvision/imaq_get_geometric_template_features/
This VI will allow you to reference your created template image and returns the features of that image giving the ‘Feature Type’ and the associated data with that feature. This should allow you to access the data you need.
Blake C.
Applications Engineer
National Instruments
www.ni.com/support

Accessing the Editor

Similar Messages

Maybe you are looking for