Accessing the Internet when there is no public network available

I currently have access to a public AirPort network but will be moving to an area where there is no public network. Do I need more software to create my own network ID? I read in the documentation with the AirPort Extreme disk that I may be able to use the AirPort with some ISP's. Is there a comprehensive list of ISP's who support AirPort? Thanks.

What I'm looking for is more specifc information: do I need more software (base station?
Your Mac is already set as far as software to support wireless Internet access. As a minimum, you will need either an wireless Internet gateway or an Internet modem & wireless router. Most Internet Service Providers (ISPs) offer these with their service.
and how do I determine if an ISP will accommodate my wireless needs (i.e. what question do I ask them before signing up)
Depending on where you live, ISPs can offer a number of Internet access services: ADSL/DSL, Cable, Satellite, or Wide-Area Wireless (usually found in rural areas). Performance, and cost, will vary and is usually quite competitive, especially in high traffic areas in major cities.
The first thing is to establish your requirements:
- What will you be using the Internet for? Basic needs like web surfing and/or email, or more advanced needs like running a business commerce site (like Amazon for example)? This will define your data rate requirements.
- Cost: How much are you willing to spend monthly for Internet access? This will set a boundary on what services will be available (cost-wise) to you.
- Local Area Network (LAN) requirements: Will you only be connecting a single computer to the Internet (or one computer at) or will you need to have multiple computers connected at the same time? Do you want both wired and wireless access? Do you plan on using the Internet for "Massive Online Gaming?" If you will have a multiple computer access need, does the ISP provide (or support) a NAT/DHCP-enabled router (which allows you to "share" the single IP address, provided by the ISP, amongst those computers) or will they require you to pay extra for multiple computer access?
The second thing is to determine the available ISPs for your area. The following website could go a long way in helping you answer that question.

Similar Messages

  • My iphone 3g is very slow when accessing the internet is there anyway i can improve this

    my iphone 3g is very slow when accessing the internet is there anyway i can improve this

    What have you done thus far to try and remedy your situation?  Have you taken the recommended basic troubleshooting steps outlined in the User Guide?

  • Having trouble accessing the internet  when my iphone is plugged into my pc

    Cannot access the internet when my phone is plugged into my pc

    If your computer is running Windows, go to Control Panel > Administrative Tools > Services.  Check to see if "Apple Mobile Device" Service is Started.  If not right click on this service and select Start.  Also make sure Startup type is set to Automatic.  If not, right click on this service, select Properties and set it to Automatic.

  • IPAD 2 WiFi only. Can I access the Internet when I plug into my computer that is connected to a LAN?

    I just purchased an IPAD2 and I love it. It's WIFI only, and I want to access the Internet when I plug in to my computer since I don't have 3G capability. But when I try and connect it won't allow. Is this standard? Am I preventing from high speed internet access on my IPAD 2 even when my computer is connected to the Internet? Any help would be much appreciated

    You cannot access the internet through the connection to a computer hooked up to the internet.
    It may be possible to configure your PC as a WiFi access point. Check your PC documentation for its capabilities.
    Or, purchase a WiFi router and hook it up to your ISP modem. You can hardwire your PC to the modem.
    Good WiFi routers can be purchased for $30-$40 dollars if you shop around.

  • I went from an I-Phone 3GS to I-Phone 5, I can make phone calls out but I can't access the internet when I am away from my WI-FI connection... any ideas?

    I went from an I-Phone 3GS to I-Phone 5, I can make phone calls out but I can't access the internet when I am away from my WI-FI connection... any ideas?

    but in the home with wireless internet access , it is continued when off, sometimes can not working,
    What does "it is continued when off" mean?
    And the same for "somtimes can not working"?

  • Why doesn't my NB505 access the internet when I bring it to a WiFi location?

    I  have a NB505.
    I  have brought it to  a  Dunkin Donuts    and to several Starbucks so as  to   get WiFi
    The notebook just does not  work as far as  accessing the internet  at  a WiFi location.
    Do I have to set it  up  somehow?
    Does a NB505  have no capacity to  access the internet through WiFI?
    Help please

    Since posting that question I have found out how to use the notebook in a WiFi place.
    Thanks.
    However also since that posting, my laptop  has  seemingly konked out. 
    See my other post

  • Photoshop Elements 9 automatically accesses the internet when started

    How do I stop Photoshop Elements 9 from automatically accessing my internet connection when I load it?  Thanks.

    If you have the internet on then elements always connects for activation purposes.
    Are you getting some kind of dialog?
    Also you can make a shortcut to the pse9 editor or the pse9 organizer
    to bypass the welcome screen.
    MTSTUNER

  • Cannot Access the internet on my Mac

    I have a MacPro, running 10.5.1 (although when this problem began it was probably a newer version the OS if there was one). I moved offices about 2 months ago-- same facility, same network. After one day in the new digs, my internet and network access (wired) stopped working. That has lead down a long path including hours on the phone with Applecare, one visit from a certified mac repairman, several archive and installs, hundreds of dollars of tech time by the company network engineers, and a month and a half of lost productivity.
    *Internet Access:*
    A wireless router has been installed, and my airport connection is set to the 192. schema. The Airport status window shows that I'm connected to the right network and full strength, however I still can't access the internet when I'm booted Mac OS. I've tried both Safari and Firefox. I can access the internet only when booted in Windows XP.
    *Office Network Access:*
    At this point, via manual configuration in Network Preferences, I have sketchy access to the office shares in both Operating Systems through a wired connection. When I'm in Leopard though, I have no access to the internet and no access to the printers on the network. In Windows XP, I have access to everything, even though XP is using the same hardware to do it. There seems to be something in my Mac OS blocking IPs. This conclusion was reached due to the fact that the office share I can access are recognized by name, but internet and printers are recognized by IP, hence, I can't use them.
    Network Diagnostics says my "internet connection appears to be working correctly" with all green lights on the left side, but whenever I try to browse the internet, it says the same thing but the "ISP," "Internet," and "Server" items under Network Status all say Failed with the red lights.
    The Office Network Engineer, anyone I talk to at Applecare, and I are all baffled. I'm the only Mac in the company, and I'm a luxury as a designer here. No one else is having these problems, and I'm now a month and a half behind. Things aren't looking good.
    Can anyone out there help me...please?
    *Other important details:*
    -Office Server is Windows Server 2003 R2
    -Every test that the Network Engineer has run on the server (Windows Server) has come up clean.
    -I can't ping any IP's from my Mac Pro
    -Traceroute yeilded the same results as everything above
    -I can only access shares by the names assigned to them
    -The network DNS could not Ping my Mac

    "I have an ethernet cable in port 1 on my computer. That is configured manually to access ther office network."
    Do you have a "real" IP address or a private (192.168.x.x, 10.x.x.x, 172.x.x.x) IP address?
    "The wireless router was connected to the company server only for the purpose of getting me online through Airport because I couldn't access it using an ethernet connection"
    Could not access it because their network security blocked you by intent, or had some unknown technical difficulty?
    Unless you are blocked by intent or ommission (if they have to explicitly allow your machine) I can think of no technical reason why your wired connection should not both get you on their network and on the internet in general. You should not need to be dual homed (though dual homing should work as well).
    Please answer the questions above when you can - I think solving the wired LAN issue will be easier if you are not being intentionally blocked.

  • I connected my BEFW11S4 router but still can't access the internet.

    I have a BEFW11S4 Linksys router and I have connected the right wires and everything and I still cant access the internet.. I go to network connections and i see that the connection i'am using says ' connected' so what gives? I load the browser and it says problem loading page.. can somebody assist me please??
    Message Edited by EsTiLO on 02-02-2008 02:26 PM

    I'm actually the 15-year-old son of the person this account is signed up for (he's making me fix it because he has other things to do), but anyway, I'm experiencing the same problem, but I will go into a bit more detail than Estilo to verify it is the same and hopefully get a bit more help:
    My dad's computer can connect straight to the modem (MSN Arescom NetDSL 800) and run the internet just fine, but only his computer; I've tried plugging my Xbox 360 directly into the modem, and it cannot connect because the ISP knows that it's not my dad's computer...?
    But the internet will not run through the router to any computers connected to it. My dad's computer is even wired to the router, and still no internet. We've found that it's an IP issue, and trying to change that doesn't work as it give us a "169" IP (a "router is there, but I can't communicate with it" IP address) whenever we try to fix anything, rather than the "192.168.1.1" or ".2" that we should have.
    My dad thinks (and I'm not entirely sure he's correctly, but I mostly agree with him) that the computer is the actual central hub for the internet, as in that it runs the administrative settings and makes the internet actually work for the rest of the computers (if his computer isn't on, no other computer can connect to the internet); the router is basically just a splitter.
    The thing is, though, that this problem started randomly about 2 weeks ago as my dad was just looking up some things on craigslist.com; that was the point when the IP addresses changed completely for an undiscernable reason. And 2 weeks ago, my computer was able to connect to the router wirelessly and access the administrative settings. My cousin (who works in this stuff) recommended that I see what I can do to fix the problem by editing the administrative settings from my computer, but now I cannot connect to the router whatsoever.
    My dad and I have narrowed it down to a driver problem, and I'm not sure what to do about it. The reason for this is we tried getting a new router (the WRT54G), and the same connection issue remained. If this is the problem, you know what the problem really is, or you have questions, let both me and Estilo know.
    Simplified Outline:
    +  comp to modem (MSN Arescom NetDSL 800) [working]
    +  comp to router (BEFW11S4) [failed]
    +  comp to new router (WRT54G) [failed]
    +  router to internet [failed] (incorrect IP to connect to ISP)
    +  not a router problem
    ?  driver problem
    ?  designated computer needed as central hub
    -  wireless connection to router was recognized (no longer works?)
    Message Edited by guitarfood on 02-03-2008 03:23 PM

  • I downloaded the latest Firefox security update and my computer will no longer access the internet in any fashion, despite the fact that I'm still connected to the internet. Other browsers no longer work either.

    Immediately after I downloaded the latest firefox security update my computer will no longer access the internet. I still have a fine wireless connection but Firefox, Internet Explorer, Itunes, and every other program will no longer access the internet, saying there is a connection error. I even tried restoring my system to a previous date but it said that a security program was preventing it from doing so.

    What's the security program called? Is it '''Win 7 Security''' by any chance? There's a rogue AV app that will prevent internet access by that name. It comes in many different flavours, but it's basically the same product with different names depending on the operating system its aimed at. See screenshot.
    Do you have another computer you can use to download Malwarebytes? Or can you get a friend to download it for you and copy it to a USB drive? Download from here: http://www.malwarebytes.org/products/malwarebytes_free
    You can use the USB drive to transfer the program to your own PC and then install it.

  • Only IE is able to access the internet; no other applications can access internet

    I recently upgraded my original Hitachi 160GB hard drive on my Lenovo IdeaPad Y510 to a WD 320GB hard drive, and cloned my original hard drive image to the new hard drive using Acronis True Image WD Edition's Disc Cloning utility. I had the utility resize the original partitions proportionally. Everything else seems to have transferred correctly to my new hard drive, but I find that ONLY Internet Explorer is able to access the internet, although I can ping my network printer, the other computers on my home wireless network, and even other IP addresses on the internet such as www.google.com, etc.
    I had removed my previous ZoneAlarm Free Firewall before doing the hard drive upgrade; it appears to have been conflicting with my Mozilla Firefox and Thunderbird applications, causing them to hang up and then not close down properly. I am currently using only the Windows Firewall and Windows Defender, along with AVG 9.0.814 Free Antivirus, SpyBot S&D 1.6.2.0 and Spywareblaster 4.3. I also used to use AdAware Free Edition, but had to uninstall it as I have not been able to update it to the newest version successfully.
    Is there something in the Windows Vista Home Premium OS I have on my machine that might be causing this problem? It is funny that ONLY Internet Explorer is able to access the internet now.

    Yes I do, and even with them checked to allow access (i.e., as an exception), it does not help.  I have tried all of the MS help about the problem, but they refer me to my machine's manufacturer for support, since my copy of Windows Vista came with it.  I cannot even use my DVD NeXtCopy software, as it requires access to the internet too, and even after re-installing it, I cannot activate the new installation because it cannot access the activation server!
    I hope someone can help me.  Upgrading to this new hard drive should not be so disastrous!
    Regards and thanks for trying to help!
    Ray
    vijaysaradhi wrote:
    You are using multiple number of malware removal tools on your system.I would recommend you to go for Microsoft security essentials Its Light on the system resources .Or use any one only...more than one will create false positive messages to come up 
    Next go to control panel-->system and security--> windows firewall-->allowed programs
    Do you see Firefox and the other browsers  in the list of allowed programs? something like this 

  • Using Windows w/ BootCamp doesnt allow me to access the internet on Windows

    I can access the internet when on the Mac side, but I cant access the internet on the Windows side. I called my internet service provider, and they were no help. I am pretty new to Mac computers, so if you can help in lamens terms, that'd be great.

    Your question is probably better asked in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

  • Cannot connect to the internet when i am away from home

    Hi : We are new at this wifi world so please be "gentle" with me!!  I have a wireless router and it works great when we are at home on our new Dell 1525 but went out of town yesterday and could not connect..the laptop turned on but could not connect to the internet..please help!!!

    The router only allows you access the internet when you are with-in range of your router.  It partly depends on the laptop but generally, most routers allow you to get internet anywhere in your house, yard, and usually about as far as your next door neighbors.  Of course, house design, wall thickness and other house design aspects can affect the routers range.  If you leave your street, the router does not broadcast signal that car.
    If you go out of town and want internet, you have to buy a mobile internet service.

  • I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    LOL!!
    I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
    Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
    Do a search on ebay.. 3g router.
    But you can get the TC to join a wireless network.
    It is a non-standard setup that Apple will not support.. the option is hidden.
    If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
    But please note the end result of this setup..
    very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
    In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

  • What is my iPad accessing on the internet when it is charging?

    Hi,
    I have a WiFi only iPad Air which is currently charging. I have noticed that my router is accessing the internet. When I put the iPad in airplane mode the router stops.
    I have confirmed that the following is, as usual, turned off:
    1) iCloud back-up
    2) Auto app updates and auto downloading of iTunes purchases
    3) Backround app refresh
    4) Location services (except for Find My iPad)
    5) iOS is up to date so it is not the update auto downloading
    6) My PC is turned off so it is not syncing via WiFi
    What is the iPad accessing on the internet?
    Any suggestions is greatly appreciated.

    There is a newer version of iTunes than 10.6.3. The newest version is iTunes 11.2.2. It may help if you update iTunes first.
    Has you iPad ever been jailbroken? You can get that error message if the device has been hacked. Have you tried recovery mode.
    If you can't update or restore your iOS device - Apple Support

Maybe you are looking for

  • Mac Microsoft Word 2008 double side printing

    Hi. I recently purchased Macbook Pro 15, and installed Microsoft Office 2008. I have a SamSung Express 282 series laser printer. When I use my window pc or window labtop, it double-side prints all right. But when I try to double-side print with Mac P

  • ICloud Drive Doesn't Show Any Other Folders

    Hello, today when I opened up pages to edit a file, I noticed that I couldn't access it on my iPhone. I went to Pages (the folder in iCloud Drive) and it looked as if it was uploaded. I then went to a new finder window and went to iCloud Drive. It sh

  • Question about hirarchical query

    Hi gurus! I have a problem with a hirarchical query. I want to if its possible to query the informations shown in table a and table b in a hierarchical way. Table a <pre> e_id e_num e_name 1 100 ABC 2 200 DEF </pre> Table b <pre> d_id d_num d_name e_

  • My iPhone camera is frozen

    ok so my camara is frozen. I restarted it and also rest the phone. it will show me the photos that i have taken but when i want to take a photo the screen is black and won't take one sometimes it will show me the camara on the front that face u but n

  • I want to get a different online number

    Hello Skype.. I need help on getting a new different online number. I already have an online number  but I want to change it to a different state number. What will I do?