Accessing the Itunes store of how many years of having an account with apple:
why when i try to access the itunes store, it gives me a message saying that I do not have enough access? Even when I'm not logged in, it will still give e this message, and now I can log in. What gives???
Hey there mgaston,
I see that you are having issues with your ability to access the iTunes Store from iTunes on your Windows PC. I have an article for you that will help you address these issues, and it can be found here:
Can't connect to the iTunes Store - Apple Support
http://support.apple.com/en-us/HT201400
Take care, and thanks for visiting the Apple Support Communities.
-Braden
Similar Messages
-
To solve the iTunes store problem, I have tried the suggestions suggested by Apple on the website to no avail. Since downloading the last iTunes update, I can no longer access radio broadcasts. It tries to connect to tuning service, but the refreshing catagory list notice never stops and connection is never made. No store connection and no classical radio connection--What will I loose with the next update? I'm not a computer person and don'y know what to do! Help would be much appreciated. Thank you!
No store connection
Could you walk us through what happens when you try to connect to the Store in some more detail, please? -
How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library
read this
https://discussions.apple.com/message/20429789#20429789 -
Error (-42032) when accessing the iTunes Store?
Hello to all,
Could somebody tell me, why I always get the following message in German "An unknown error occured (-42032)" when I try to access the iTunes Store and
how can I avoid this message? The technician from Appel was unable to help me.
I wonder if you can help me.
Thank you in advance and best regards.
rolfwipiDoublechecking. Is that a 42023 rather than a 42032?
If so, perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
Using iTunes 10.6 i am unable to access the iTunes store
Since I installed iTunes 10.6 on my Win XP PC, I am no longer able to access the iTunes Store, sinc my iPod Touch, or view My Account.
In the course of your troubleshooting to date, have you worked through the following document?
Apple software on Windows: May see performance issues and blank iTunes Store -
Why can't i access the itunes store?
I recently got a new computer with Windows7 and have not been able to access the ITunes store. I was able to get to it with my old PC running Windows XP, but now I can't get to it. I get an error message saying that I am not connected to the internet even though I am connected. Is there some other settings that I need to adjust before I can access the store? I have tried removing and reinstalling the ITunes software several times but it didn't have any effect.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I just recently downloaded the newest version of iTunes and am signed into my iTunes account, but I am unable to access the iTunes Store. I didn't get an error message with a reason why I am unable to connect, I'm just not able to connect to the iTunes Store. Please help!
https://discussions.apple.com/message/22904334
-
I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?
In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ -
How can the following error incurred when trying to access the Itunes Store be corrected: an unknown error occurred There was an error in the store. Please try later 0x80092013
Try here > http://support.apple.com/kb/TS3221
And/or... see the More Like This section on the right. -
After downloading the new version of Itunes onto my windows 8, my computer freezes when i attempt access into itunes store. How can I fix this problem?
Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.
-
25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her. I can access the iTunes store for all other options but not to update. How can I get her updated?
Try quitting the App Store:
Tap the home button to get to the home screen. Then double tap the home button, and hold your finger over the App Store icon. Tap the red when it appears. Tap the home button again to return to the home screen.
Try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. -
For some reason when I open iTunes, and try to access the itunes store, help, my account, or anything else I get a message saying that I'm not connected to the internet, even when I know that I am. What's wrong?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Since downloading itunes 10.5 i cant access the itunes store. how do i fix this?
Since i dowloaded itunes 10.5 i cant access the itunes store.It justs freezes halfway. Can anyone help me?
My issue was a conflict with Xeno Pro network card. Had to update to beta level drivers for 64bit Windows 7 to resolve.
-
I have had the same account for over 4 years. I have had my ipod touch for 2 years and have always been able to access the itunes store and download content from my pc and my ipod touch. A few months ago, I started to receive the message that I've entered the wrong password but I know that it is correct. I can download all I want from my pc without any problems at all. How do I get my device to accept my itunes password so that I can get back to downloading content directly to my device?
I'm having the same issue. Just hooked up a Mac Mini and running the internet just fine over wifi, but Facetime isn't working. I'm going to try resetting my router in the morning.
-
I have tried uninstalling and reinstalling Itunes, but it still gets hung up when trying to access the Itunes Store from the Itunes program.
I've been unable to register the new Nano or sync it with my library.Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
Maybe you are looking for
-
HT2188 How can I fix the home button on my iPod touch?
I have a 4th generation iPod touch that is about almost 2 years old. I've never dropped it on a hard surface like concrete or hardwood floors, just a few times on my carpet. It's never been scratched, never had water damage or anything like that. It'
-
-How to use JDBC to connect the SQLServer and Oracle.
Hi, I create a table in the WIP DB, I want to modify this table when use "PRE-START" activity in POD. SAPME version: 5.2.3.4 SDK:2.0 DB:SQL2005 and Oracle 10.2g SourceCode like below: public void execute(StartHookDTO dto) throws Exception {
-
Hello, I have a doubt about the installation of the central/control system of TDMS, the documentation say that TDMS should be installed in a Netweaver 7.0 and it also say that the solution manager can be used for the central/control system, but I als
-
I updated my itouch and now my apps are gone and I can't download.
So I did the ios5 update on my itouch gen4 and I synced it right before and everything was still normal. The upgrade took about 30-40 mins. I kept it pluged the whole time and after for about an hour or two but everything had stopped loading. But it
-
Huge reserved memory according to DebugDial (memory leak?)
We experience memory problems in production. On the 2008 Windows Server there are many web api services. I see that most of them have the same problem(?) which is quite a big number as reserved memory. Below are informations from one othe services w