Accessing the USB drive on HH3 via Android

Hi, i know that some people can access a usb drive connected to the HH3 on ipads etc, but can it also be done from an android, on 2.2 or 4.0 android devices - many thanks in advance.

Sorry for the aggravation...I took an easier route, reset the AEBS and did an ignore on the Dual Nat issue. I was then able to use the more tradition means of connecting to the USB drive via finder network connection over the internet.
Seems much easier than going the bridge mode ---> port forwarding route.
Cheers!
David

Similar Messages

HT2421 How do I access the USB drive once it is connected to the Airport Extreme? I can't find it? Thanks.

I have set upmthe Airport Extreme and all is well, except I do not understand how to access the USB Drive. I am using a PC and two IOS Devices

An App like Filebrowser will allow your iOS devices to browse files on the hard drive.
Stratospherix - Products - FileBrowser - Overview

Can't access a USB Drive connected to Time Capsule from a Windows PC. Apple Care can't/won't assist. HELP!!!

Trying to get my Windows 7 PC to access the USB Drive that is connected to my Time Capsule. I have a Fat32 Formatted USB drive connected to a 2TB Time Capsule and I'm trying to get access to that drive from a Windows 7 PC. I've attempted to map the network drive (based on some 3-4 year old articles I could find online) but any time I access a file from the PC, the Time Capsule "freaks out" and disconnects all connections to it which forces me to unplug it to restart the Tim Capsule. I'm at a loss now as to what to do.
Spent a few hours talking to Apple about this and much more. Apple Care can't or won't help with this particular problem (the guy I talked to, as nice and helpful as he wanted to be, had no experience supporting their hardware in a Windows environment).
Someone has to know how to fix this so, PLEASE, help if you can!

First off, Archon23, what you want to achieve is possible. I have access to both my Time Capsule (TC) and the USB drive connected to it, from a Win. 7 and Win. XP machine.
Here is what I see from the Windows side of things:
     From My Computer - TC USB Drive (Y)
     From Windows HomeNet - Time Capsule:
Now getting there is the trick.
One caveat before proceeding: I am not well versed in Windows Networks, Windows Sharing and Firewall settings so some of the following may not be elegant, may not be absolutely required, and may not be the best way of getting there. But it is what I did to see both the TC drive and it's attached USB drive on the Windows side of my network..
1.) First, I added Airport Utility to the Inbound rules of Win 7 Firewall
While poking around my Network Sharing and Firewall settings trying to figure this out, I got a Pop-up recommending I do that. AND I did that. Oh, and while you are at it, make sure you have a Home network established.
2.) Next, on a hunch, I installed a USB Wi-Fi Adapter (under $20) to my Win PC, enabled that Wi-Fi connection and disabled my Ethernet connection. I was getting no where on this matter with my Ethernet connection to a DSL Gateway. But with a Wi-Fi connection to my AirPort Express Base Station, I made progress.
3.) Finally, while poking around my Network Sharing Center some more, one by one I started the various network device Setup Wizards in there, and Trouble Shooters, to find the elusive TC/USB devices in question...AND voila, it worked.   And it's stable, been this way for going on two weeks now.
Good luck.

Is there a possibility to download files directly to the external usb drive in Firefox for Android?

I have the Android device that support external usb hard drive, when I want to download some files via Firefox there are only two possible "places" where I can put the files - external memory or SD card. It will be nice if there would be an option to save file on ext. usb drive.

Hi Nix_N1:
Yeah I don't know about this and I don't have an Android device that supports USB storage.
What Android device are you using and what operating system (Jellybean? Ice Cream sandwich ?)
I asked the Mozilla QA folks and they said Firefox for Android uses the Android platform download directory so the USB drive *should* show up if it registers properly with Android.
They suggested the following:
# removing the SD card and seeing if it shows up in place of the SD card.
# perhaps changing the following preference (type "about:config" in the url bar without the quotation marks)
''' browser.download.dir'''
will fix it ('''WARNING:untested and unsupported but hopefully this might help''')
Regardless I suggest filing a bug at (I looked but couldn't find a bug that corresponds to this):
https://bugzilla.mozilla.org/enter_bug.cgi

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

Accessing a USB drive connected to Airport Extreme over Internet

Hello!
I have an iPad, I have an Airport Extreme with a USB drive connected and I have a MobileMe account.
And I'm aware that as yet there's no Back To My Mac for iPad.
Is there an easy way on the iPad to connect remotely to the USB drive, over the Internet?
I don't want to have to leave my MacBook Pro on whilst I'm travelling.
I've looked at Logmein and Filebrowser and iTeleport and can't find a way to do this.
Has anyone managed to suss this???
Many thanks....

I am not ware of any way of doing what you want since, to my knowledge, the AE does not function as a server to "serve" the contents of a connected USB drive. I have a LaCie NAS and that NAS includes a FTP server that I can access via my iPad via AirSharing HD.

I have a broken screen on my 2008 MacBook, I want to access the hard drive what are my options?

I Have a 2008 MacBook with a broken screen, how can I access the hard drive?

1. Connect an external monitor. If everything else is working fine on the MacBook, you'll have full access to your computer. Or
2. If the MacBook has a FireWire port, use Target Disk Mode (http://support.apple.com/en-us/HT1661) to mount the HDD and then copy the files to the second Mac. Or
3. Remove the HDD, put it in a $20 USB caddy, and connect it to another Mac for file-retrieval.
By the way, this forum is devoted to vintage Classic operating systems that Apple retired over a decade ago. More people will see your posts if you put them in a forum devoted to your particular level of OS X (Leopard or above for a 2008 MacBook).

How do I access the USB harddrive on E3000? Am I missing something?

I have my router setup fine to the internet, as well as the media server. I can't figure out how to access the hard drive from my laptop, however. The manual says put 192.168.1.1 in the address field of windows explorer, but it just gives me the "Setup" page for the router.
Am I missing something simple? I'm using Windows XP.
Solved!
Go to Solution.

Click on Start -Go to Start>>Run/Start search and type "\\192.168.1.1" (Without quotes) and hit enter, and it should prompt you for the Username and Password, in the Username and Password use "admin" all in lower case and click Ok...Now you should be able to see your USB Drive... You need to right click on it and select "Map Network Drive" and check the box Enable and below click on Finish... This will Map the USB Drive on your computer... Once done you will be able to Send and Receive the data from your Computer to the USB Drive...

Accessing the hard drive of a Time Capsule with Windows XP

Hi,
I have a time capsule configured in client mode so that I could share a printer and a hard drive on my existing wireless network. I now can print from both computers and I can acces the hard drive with the mac that I used to configure the time capsule.
But I can't find anyway to access the hard drive from the pc. When I use AX to connect as a guest it's giving me an error "user unknown or session desactivated contact the admin (67)". (The config is authorizing guests so it should work)
What's wrong ?
Thanks for your help,
Julien

FireWire Target Disk Mode requires two Macs.
Can you remove the hard drive from teh PC laptop? If so, you can use one of these:
Newer Technology Universal Drive Adapter USB 3.0 - connects any 2.5", 3.5" or 5.25" drive
to mount the drive on the Mac. most Macs will read PC drives. You can't salvage applications but you may be able to recover data files.

I can not access the hard drive connected to my airport extreme! Any thoughts?

I can not access the hard drive connected to my ariport extreme. When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
Any thoughts.
A

Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
Finder Preferences > General > Show These Items on the Desktop > Connected Servers
Then with the Finder menus displayed at the top of the screen click the Go menu
Click Network and the AirPort Extreme icon should be displayed
Double click the icon to mount the drive on the desktop

Can't Access any USB drive

I just installed Windows 10, and untill now all is working fine except for the fact that I can't access any USB Drive or PEN.
When I try I always get the following message:
this operation has been cancelled due to restrictions in effect on this computer
How can I fix this BUG.

Hi,
I don’t think it’s a bug, it could be driver or settings issues.
Please run rsop.msc to see if there is any related Group policy was configured to block USB device.
First I would like to confirm with you that expect USB drive, if other USB device can be recognized fine.
If not, I recommend you to update or reinstall the USB controller under Device manager.
If this issue only happened on USB drive, let’s try following suggestions:
Suggestion 1: Check hidden device drivers
Unplug your USB storage device.
Type CMD in Start Search.
Right click cmd.exe and select
Run as administrator. Click Yes if the User Access Control box pops up.
At the Command Prompt window, type
set devmgr_show_nonpresent_devices=1 and press the Enter key.
Using the same Command Prompt window, type
devmgmt.msc to bring out the Device Manager.
At the Device Manager top menu, click
View and select Show hidden devices.
Browse down to the Universal Serial Bus controllers and click the
+ to expand the list.
Probably you will see some light grey devices, e.g. USB Mass Storage Device or USB Composite Device. Right click each and every light grey devices and select Uninstall. This will remove whatever "hardware profile" linked
to your USB storage.
Attached your USB storage device and see if it works.
Suggestion 2: Check if the drive can be recognized under Disk management:
Right click the Start icon and choose Disk management.
If you can find your USB drive there but there’s no in File explorer, follow these steps.
Run cmd as admin, type following commands to enable automount feature:
Diskpart
automount enable
Details for this command:
http://technet.microsoft.com/en-us/library/cc753703.aspx
Then try to assign letter for your USB drive again by using commands below:
Run cmd as admin, type following commands:
Diskpart
list volume
sel volume x [x present the volume number of your USB drive]
assign letter=g:
Another thing is if you use USB3.0 to connect the drive, change it to USB 2.0 to see what's going on.
Kate Li
TechNet Community Support

I need help setting Win7 Advanced attributes for the USB drive connected to my EA4500 router

I can drill down to the Permission Entry for [foldername] window for a folder on the USB drive. There I learn that user group Everyone does not have the Full Control permission box checked. When I check the box and then click Apply, I get an Error Applying Security window. If I click Continue there, I get a Windows Security window that says "Unable to save permission changes on [foldername]. Access is denied." with no way out but an OK button.
I have Administrative authority in Win7, but maybe I need to know some Unix voodoo to come to terms with my router-mounted drive. I put the drive on the router to make always available, and I'd like to get it to work. For example, I can't turn the archive bit off for any file or folder on that drive when it's mounted on the router. Not with ATTRIB -A and not with XCOPY /M.
Just to stuff it in my face, XCOPY /M returns a two-line error message for every sub-folder that exists in the target folder:
Access denied
Unable to create directory - foldername
Help! And thanks in advance.
:+)
Solved!
Go to Solution.

Bill Dennes,
(Solutions/Work-Arounds below this paragraph, but sets up some useful information.)
As for the Security tab, I'm unsure of exactly why it doesn't appear on the tab itself for folders; however, clicking "Advanced -> Change Permissions -> Edit" will display the permissions; although, this doesn't appear to be a part of the problem in a sense. Additionally, “Everyone” always only has read & execute and is also not a part of the issue. To go further with this, the only users that have delete permission are “0” and “root” and since we can delete, we “should” be logged in as one of them and as such have “Full Control.”
As for the drive type, I'm unsure of why it "changes" it from FAT32 to NTFS (probably something to do with how it handles permissions); however, this is also not a part of the issue.
I have a flash drive formatted to FAT32, albeit only a 4GB and on an EA6500 with secure sharing enabled, that it does these both to and "xcopy testfolder Y:\ /e /m" works on it when all files and folders have the A attribute; however, disabling secure sharing makes it fail.
I’ve looked further into this and there are three ways I know of, as of right now, to make copying files with the bat file work for you:
The first way is to enable secure sharing and map the drives using it, once that is done you won’t need to enter the password again and your script will work as you currently have it coded. Given you have no need for the secure sharing, but it’s a simple solution. This is also the only way to be able to modify any attributes, although the only ones I know of that it will accept are R and A.
The second way is to instead use ROBOCOPY with the options /e, /m, and /copy:dt.
For example: "robocopy testfolder Y:\ /e /m /copy:dt"
/e = Copy subdirectories, including empty ones. (or use /S which will not copy empty folders)
/m = Copy only files with the Archive attribute and reset it.
/copy:dt = Copy data and timestamps, does not copy attributes, security, owner info, or auditing info.
The only important option to use is /copy:dt, the others can be replaced with whatever you need. Note that things like Song Author will still get copied as they are a part of the data section. I don’t believe XCOPY supports doing this, and in either case robocopy is a better solution that comes with Windows Vista and up, and can be gotten for those below Vista.
The third way is to add a section to the script to remove attributes from all folders before using xcopy to copy to the NAS, or modify the section that is causing the folders to have the A attribute as xcopy will gladly still copy them with /E or /S enabled.
The issue seems to be that when secure sharing is off, the server refuses attribute changing of folders, which is what is causing XCOPY to fail, as I suspect it attempts to change the attributes on the folders. Similarly, using robocopy without /copy:dt will also fail but gives you “Error 5 … changing file attributes [folder/path] Access is denied”. This is why I suspect that when XCOPY says “unable to create directory” that it is actually trying to change the attributes of the directory. Furthermore, it seems that the reason this works while secure sharing is on is that while it is on, the server pretends to accept the attributes but in reality ignores all attributes besides R. The server then adds the A attribute to all files put onto it, which you can only modify when secure sharing is enabled for some reason. The exception to this is that in either case, any file with the “H” (hidden) attribute, will not be copied, even if explicitly told to copy it. (This is true for both robocopy and xcopy; you also cannot manually add it afterwards.)
Is there an issue with the files on the NAS having the A attribute? If so the only way I currently know of to get rid of it is to enable secure sharing and have the script remove the attribute after copying. For example, when you look at the permissions, the user "0" and “root” have full control as I've previously stated. You can tell Windows to specifically use one of them when mapping the drive, which in turn should give you full control; however, the server still refuses modifying attributes without secure sharing on for some strange unknown reason. Although, I am no "UNIX gearhead," so there may in fact be another way that I do not know of. The only time they are not listed as “Full Control” on my end is when a file was previously marked Read-Only, in which case they all share the same limited control. When I said in the beginning that the permissions are not a part of the problem in a sense, it’s more of that for the general case of what you need to do, they aren’t the problem as long as you don't need the R attribute and having the A isn't an issue, as it seems to be more of the server is refusing attributes even though we should have permission; however, they do appear to be a bit weird and are possibly displaying incorrect when secure sharing is disabled.
I'd like to apologize in advance for any unclear, weirdly stated, or just plain odd things said in this post as I was pulled away to do a bunch of things and ended up editing, adding things, and finishing it late into the night and hope that one of the above is an acceptable resolution to your issue.

I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

I don't think backup is supported but you may be able to access the TC's internal drive, from the iPhone, with an application like: NetPortal
Note: I haven't actually tried this app, so if someone else has and was successful in accessing the TC's drive they can certainly chime in.
Follow-up. Just downloaded and installed this app ... and I can now verify that it, indeed, can access both my TC's internal and externally attached USB HDD.

Accessing Lacie USB drive from Time Capsule

I have recently purchased a time capsule. I would like to transfer the contents of a LaCie 750G USB HD to the TC. I've plugged it into the USB connector of TC, and Disk Utility sees another HD (In Airport Utility, under 'Disks' it sees the USB drive as a Hitachi HDT721075SLA380). However, I cannot see this disk when accessing TC through Finder on my MacBook.
Is there an easy way to copy the contents of the LaCie to the TC?

Couple of thoughts:
The Time Capsule's USB port would be a lot happier to see a drive format of Mac OS Extended (Journaled), although FAT 32 may work if you don't exceed a 4 GB file size.
Although the message says it will take 7 hours, did you actually make a copy to confirm this? If you did not, the only way to will know if it will really take that long is to make the copy. It could be much less.
If you don't already have any valuable data on the disk, I would suggest that you re-format it using MAC OS Extended (Journaled). Might also be a good idea to Verify Disk and Repair Permissions if indicated using Disk Utility.

The USB drive on my computer is no longer working. How can I transfer my iPod libarary to another computer

The USB drive on my computer is no longer working. How can I transfer my iPod library to another computer.

Try:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Accessing the USB drive on HH3 via Android

Similar Messages

Maybe you are looking for