Accessing trash folder causes folder to lock on server?

Hi,
I've been having this problem. I hope someone can help with some advice:
My workplace IMAP account's trash folder is named "deleted-messages". I use this folder to store my trashed messages on my IMAP server. In Apple Mail, I had mapped this successfully as the Trash folder for about 2 years already. I've been happily using Apple Mail during this time.
A couple of days ago, I could no longer access my deleted-messages folder:
1. each time i deleted a message, Apple Mail would tell me it could not move the message to the 'deleted-messages' folder.
2. each time i tried to view the folder's contents, Apple Mail would not respond and would show me the 'spinning beachball' until I forced a quit.
But I have not had a problem using other email clients (Thunderbird and Pine).
When I logged into my workplace server through a command prompt, I noticed a "deleted-messages.lock" file in my mail directory. I deleted the lock file, and all my other clients are able to access my deleted-messages and delete my mails correctly. However, when I access "deleted-messages" (or Trash) using Apple Mail, I get the same 2 problems listed above, and a new ".lock" file is created in the mail directory.
I can't seem to get around this - I have completely deleted my account in Apple Mail and recreated one, but the same problem arises.
Can someone help me understand what's going on?
thanks!

ok, found the problem - there was a bug with the new imapd service being run...
thanks for reading!

Similar Messages

  • Cannot Access Trash Folder In Mail

    Hi,
    I'm new to the Mac OS and have a new MacBook Pro running Lion.
    Whenever I click on the TRASH icon in the MAIL application, the application "unexpectedly" closes and an error message is sent to Apple.
    Just before the folder disappears I can see the deleted messages in the folder.
    Am I missing a setting somewhere? (hopefully)
    Best,
    Bill

    Hi Allan,
    First make sure you have enabled either POP or IMAP (depending on which one you want to use) in your gmail account settings page on the gmail website. Then make sure you follow the setup process correctly: http://mail.google.com/support/bin/answer.py?answer=81379
    Also make sure you set your username in the mail setup window as [email protected] By default it only puts username. You need to make sure the @gmail.com is there too.
    If the password is correct, it should work fine.
    Hope this helps!
    Alwaysapple

  • Oracle BI Publisher - can not access Shared Folder , using Oracle BI Server

    Hi there,
    We have an installed OBIEE and BIP (BI Publisher) system which is the security setting of BIP using "Oracle BI Server".
    Our OBIEE security is using the combination of LDAP (authentication) and Relational Table (for grouping user privillege)
    The integration connection between OBIEE and BIP is successfull, and I can connect using Administrator to the BIP
    But when I assign a general user using group : XMLP_Admin (define in rpd file and relational table), the user can log in to BIP, but can NOT access the Shared Folder.
    the error desc : "Error 500: SRVE0199E: OutputStream already obtained"
    Anyone can help ?
    Thanks a lot
    -toni

    Did you define Roles and Permissions to the shared folder from BIP Admin?
    -Prakash

  • URGENT - Change the timestamp on Modified access on folder in Windows 2003 Server

    Hi
    How can I change the time stamp (for modified access )on a folder on a Windows 2003 Server folder?
    Thanks

    I think it could be done with script. See if this article could help:
    How Can I Change the Last Modified Timestamp for All the Files in a Folder?
    http://blogs.technet.com/b/heyscriptingguy/archive/2007/02/13/how-can-i-change-the-last-modified-timestamp-for-all-the-files-in-a-folder.aspx
    If you have any feedback on our support, please send to [email protected]

  • Alpine: multiple SMTP Servers & Trash folder

    Hi,
    I want to use multiple smtp servers in alpine. I've set a main server via Setup->Configuration (see below) and added another imap Server via Setup->collectionLists. So reading mail is no problem, I can see the different servers / folders in the "Folder List" view (the added dots or slashes after the folder names are a minor problem...).
    In order to send mail via the second server, I've added a rule via Setup->Rules->Roles, so when sending a message, the right smtp server corresponding to the folder where I'm in is chosen.
    BUT alpine always postpones messages to the folder on the main server, even when the message is composed for the second server. The same applies for sent messages: they are always saved on the main server.
    How do I tell alpine to save postponed/sent messages on the right server?
    Current configuration:
    Setup -> Configuration:
    Personal Name = My Name
    User Domain = <No Value Set>
    SMTP Server (for sending) = smtp.server.tld:587/user=USERNAME/tls
    NNTP Server (for news) = <No Value Set>
    Inbox Path = {imap.server.tld:993/user=USERNAME/ssl}INBOX
    Incoming Archive Folders = <No Value Set>
    Pruned Folders = <No Value Set>
    Default Fcc (File carbon copy) = {imap.server.tld:993/user=USERNAME/ssl}Sent
    Default Saved Message Folder = <No Value Set: using "saved-messages">
    Postponed Folder = {imap.server.tld:993/user=USERNAME/ssl}Drafts
    Read Message Folder = <No Value Set>
    Form Letter Folder = <No Value Set>
    Trash Folder = {imap.server.tld:993/user=USERNAME/ssl}Trash
    Literal Signature = <No Value Set>
    Signature File = <No Value Set: using ".signature">
    Feature List =
    Setup->Rules->Roles
    ============ ACTIONS BEGIN HERE =============
    Initialize settings using role : <No Value Set>
    Set From = My name <[email protected]>
    Set Reply-To = <No Value Set>
    Set Fcc = <No Value Set: using "value from fcc-name-rule">
    Set LiteralSig = <No Value Set>
    Set Signature = <No Value Set: using "default (.signature)">
    Set Template = <No Value Set>
    Set Other Hdrs = <No Value Set>
    Use SMTP Server = smtp.2nd-server.tld:25/[email protected]/tls
    Use NNTP Server = <No Value Set>
    Second question: How do I make use of the Trash folder? At present, mails marked for deletion are deleted completely when expunged. How do I move them to Trash folder instead? (of course in the trash folder on the right server...)
    Any hints appreciated -- Thanks!

    mrchi wrote:
    Mail also lists other folders with similar names at the same level as INBOX, which appear to have a mysterious relationship with the real folders on the server. Some are the same as, some not. Are they "local" folders?
    Yes, they're local folders (located in /Users/youruseraccount/Library/Mail/IMAP-account@domain), they're synced and display the contents of the folders on the server, so when you move some message from one folder to the other, the folders on the server will reflect this change.
    Also, to select if you want to keep local copies of the messages or not, you can go to the Advanced properties of the IMAP account in Mail.
    Can I get rid of them and just use Mail to display only what is actually on the server, in the structure it is on the server?
    Nic
    No, you can't get rid of them. Usually you can minimize them under a sort of earth globe icon.

  • Trash will not delete from trash folder! What can cause this effect?

    Trash will not delete from trash folder! What can cause this effect?

    u can actually force it to delete, oviously i assume you dont have the application or data etc open neware else?
    try restarting your computer, go into finder close all your open applications etc, servers, **** even clear your data in your web browser, do a disk utility check and verify your drives and repair em if nessicary.
    as chamar suggested look at http://www.thexlab.com/faqs/trash.html
    i had the same problem before but with a good 5-10 minutes of googling i was able to solve it..
    best of luck

  • After downloading IOS5, i can't access my itune and receive the following message "The Folder "Itune" is on locked disk or you do not have write permissions for this folder", noting that i access this folder in a normal way. Any clue ?

    After downloading IOS5, i can't access my itune and receive the following message "The Folder "Itune" is on locked disk or you do not have write permissions for this folder", noting that i access this folder in a normal way. Any clue ?

    In my case its a new computer the old one was stolen and the time machine disk did not work for a restore but did for copying the info to the new mac

  • I can not access my trash folder...

    this is with OSX 10.4.9.
    the trash folder is in the sidebar, but will not reveal it's contents.
    any suggestions would be great-
    charles

    What type of mail account is this (POP, IMAP, .Mac)? If IMAP or .Mac, what are your Preferences > Accounts > Mailbox Behaviors > Trash settings?

  • I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

    I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

    Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
    When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
    Exchange 2003 server into the domain/forest. 
    You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
    So it sounds like you are not looking in the right location within ADSIEdit. 
    You may find the following article also helpful for this issue which is the same resolution:
    http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
    I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
    http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

  • Kernel Panic and Application Crashes when Accessing a Folder

    Hi,
    I originally posted in the iTunes forum (http://discussions.apple.com/thread.jspa?threadID=252516&tstart=75) with this problem as it was in iTunes where I first noted the issue. However since then I have discovered it is a system wide issue.
    Everytime I try to access a specific folder, my iTunes Music folder, whichever application is accessing it will crash. Finder crashes when trying to view the folder, and other apps will crash when trying to open from or save to that folder. There will be no crash reporter when they crash either. I have also experienced two kernel panics, one when iTunes was playing, and another when Tech Tools Pro was doing its surface scan. The folder is on one of my two FW800 connected external hard drives. The kernel panic looks like this:
    panic(cpu 0 caller 0x002478C8): hfs: block mark free: trying to free non-existent blocks (-1094886590 -1078469906 39039948)
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00095698 0x00095BB0 0x0002683C 0x002478C8 0x00246F00 0x00245258 0x002453A8 0x00246150
    0x0022AE54 0x0022B068 0x00220AD4 0x000FD688 0x000E8058 0x000E7FA0 0x000F0D64 0x002A9BF4
    0x000ABE30 0x4D4C4C4C
    Proceeding back via exception chain:
    Exception state (sv=0x2E2EE500)
    PC=0x90027ECC; MSR=0x0000D030; DAR=0xF0077300; DSISR=0x42000000; LR=0x92914CD0; R1=0xF00FEC00; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPCModel: PowerBook5,2, BootROM 4.7.1f1, 1 processors, PowerPC G4 (1.1), 1.25 GHz, 1 GB
    Graphics: ATI Mobility Radeon 9600, ATY,RV350M10, AGP, 64 MB
    Memory Module: SODIMM0/J25LOWER, 512 MB, DDR SDRAM, PC2700U-25330
    Memory Module: SODIMM1/J25UPPER, 512 MB, DDR SDRAM, PC2700U-25330
    AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
    Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
    Bluetooth: Version 1.6.6f22, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
    Parallel ATA Device: MATSHITADVD-R UJ-816,
    Parallel ATA Device: HTS548080M9AT00, 74.53 GB
    USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
    USB Device: Kensington PocketMouse Pro, Kensington, Up to 1.5 Mb/sec, 500 mA
    USB Device: psc 1310 series, hp, Up to 12 Mb/sec, 500 mA
    FireWire Device: 6B200P0, Initio, Up to 800 Mb/sec
    I am not entirely sure as to what this means or how to deal with it. I am able to access the folder via terminal, but there are 2700 folders within my iTunes Music folder and 23137 songs, so it could take me a very long time to find the exact file or folder which is causing me problems. I could potentially have enough disk space should a backup be required but it would be backed up to 3 different drives and would be close. That is assuming of course that I would not experience the same panic when accessing the area. Can anyone help me with this?
    Powerbook G4 1.25Ghz   Mac OS X (10.4.3)  

    The first phase:
    Since the Kernel Panic is temporarily a state of suspended animation because of a safe-boot solution, try the next step. This is a pre-caution to avoid any failures during ongoing troubleshooting.
    After safe-boot, launch System Profiler and select /Software/Extensions/ directory in Contents (on the left column ) menu. Next, open /System/Library/Extensions/ folder by Go to Folder command or by manual. Compare the both contents. You'll see System Profiler shows less kernel extensions than /System/Library/Extensions/ folder. There are ".kext" files that are not shown in the loaded Extensions directory. If there is a most suspect third-party extension (perhaps FireWire's driver), try removing out of the folder to a temporary made folder on the desktop-- you may be prompted the admin or login password.
    The second phase:
    TechTool Pro fixed a file structure error in one file on the main drive, and some bad custom icons or bad bundle bits error now lie on on the main and one of your secondary drives, but not the previous problems. Also, you still cannot access that folder, however folders within that folder you can get to just fine, via the Go To Folder command or reveal in finder from iTunes.
    Those symptoms appear to suggest that some directories structure and the volume information other than the main drive have lost their consistencies and a directory may be no longer accessible for some reason which happened before or during the Kernel Panic. Techtool Pro 4.0.6 seems to not be able to fix those problems. So if you have DiskWarrior 3.0.3, run it and hopefully fix them. If you do not have it, try the followings.
    Connect the external FireWire drive in question, then boot into a Safe-mode. If this does not work well, first boot into a Safe-mode then connect the device.
    Launch Terminal utility. Type diskutil list at the prompt. Here is an example to be displayed:
    MyMachine:~ Myself$ diskutil list
    /dev/disk0
    #: type name size identifier
    0: Applepartitionscheme *233.8 GB disk0
    1: Applepartitionmap 31.5 KB disk0s1
    2: Apple_HFS MacOSX_HD 70.7 GB disk0s3
    3: Apple_HFS Data_HD 162.8 GB disk0s5
    /dev/disk1
    #: type name size identifier
    0: Applepartitionscheme *111.8 GB disk1
    1: Applepartitionmap 31.5 KB disk1s1
    2: Apple_HFS Data21HD 69.9 GB disk1s3
    3: Apple_HFS Debugger_HD 41.6 GB disk1s5
    Find the disk identifier that points the external device in question. Type sudo fsck_hfs -fy /dev/disk1s3 if the target drive would be disk1s3. If the result shows you like below, the symptoms may be fixed.
    MyMachine:~ Myself$ sudo fsck_hfs -fy /dev/disk1s3
    ** /dev/rdisk1s3
    ** Checking HFS Plus volume.
    ** Checking Extents Overflow file.
    ** Checking Catalog file.
    ** Checking Catalog hierarchy.
    ** Checking Extended Attributes file.
    ** Checking volume bitmap.
    ** Checking volume information.
    ** The volume Data21HD appears to be OK.
    If the above solution fails, boot into a Single-user-mode and perform the same way as above-- a "sudo" parameter MIGHT not be needed to type.
    The third phase:
    Start up from Mac OS X 10.4.x Install disc. Launch Disk Utility program. Try repairing the target volume(s) on the external device and then repair the permissions.
    If the above solution fails to fix all filesystem problems on that volume, then you may need to abandon hope some file or folder in question to trash it/them. Of course, I do not hope so.…
    Also, when I booted into Safe Mode it started up the volume menubar item as usual but I had no sound... Is this normal during a Safe boot?
    Certain Mac OS X features do not work when you are started up in Safe Mode. For example, you can't use DVD Player, capture video in iMovie, use an AirPort card, use audio input or output devices, or use an internal or external USB modem.
    So it should be no problem on this matter.

  • Trash Folder gets emptied every few days

    Every few days the Deleted folder gets emptied and I can't find any way to stop it. It makes it very difficult when I'm expecting a delivery or need to remember log in info etc.
    I used to use Window Live Mail and the Google Inbox app on my phone and have it set up to access my mail as IMAP so I could check my mail where ever I was and that worked but when I noticed my mail vanishing I stopped using one then the other to try and figure out if one or the other was causing the problem. I'm currently only accessing my mail via the web page and it still vanishes. Sometimes after a few days and sometimes after a few hours. I've checked the options and there's no "Empty deleted folder" option that I can find.
    I'm still on BT Yahgoo mail even though I was swapped once then that got reverted.

    If you want to keep it, why put it in the trash folder? Would it not be better to either leave it in the incoming folder or move it to another folder that you could make for the purpose of keeping emails.
    See link about Trash Folder
    http://bt.custhelp.com/app/answers/detail/a_id/45794/~/bt-mail%3A-deleting-email-messages-and-managi...

  • Incoming mail going to trash folder instead of inbox

    About 20% of my new emails are deposited in the trash folder instead of my inbox.
    How can I prevent this?

    Your slow computer could be caused by a number of problems such as memory, hardware, or software issues. It isn't related to the problem you had with Mail.
    First, I suggest you open Disk Utility and repair permissions on your boot volume. Then verify if the hard drive is OK, or does it show problems.
    Restart the computer and see if you still have problems.
    If so, I would just advise you to post a new discussion describing this problem so others with better knowledge could help you to figure out the problem.
    Search google or these discussions on Slow Computer with Yosemite. There are many discussions on this already. You might also look into downloading EtreCheck and providing that information in your post. It will gather information from your computer to allow others to look and analyze what you have that could be causing issues.
    EtreCheck:
    http://etresoft.com/etrecheck

  • Mail going to Trash Folder?

    Almost all my mail is going straight to the trash folder on my iPad?
    Please Help?

    Your slow computer could be caused by a number of problems such as memory, hardware, or software issues. It isn't related to the problem you had with Mail.
    First, I suggest you open Disk Utility and repair permissions on your boot volume. Then verify if the hard drive is OK, or does it show problems.
    Restart the computer and see if you still have problems.
    If so, I would just advise you to post a new discussion describing this problem so others with better knowledge could help you to figure out the problem.
    Search google or these discussions on Slow Computer with Yosemite. There are many discussions on this already. You might also look into downloading EtreCheck and providing that information in your post. It will gather information from your computer to allow others to look and analyze what you have that could be causing issues.
    EtreCheck:
    http://etresoft.com/etrecheck

  • Deleting files from trash folder 10.9.2

    I recently updated to 10.9.2. Nothing seemed to have changed but the trash folder is acting funny. Now I am not able to delete any file from the trash. I select empty trash securely and then the dialog box displaying the number of files to be deleted appears and disappears in 1-2 seconds and the file/s dont get deleted.
    Is there a way out of this?
    Cheers!

    Trash – Can’t Empty or Move File To Trash
    Trash – Empty When File is Locked or in Use
    Try holding down the option button while trying to delete the Trash. If that doesn’t work, here is some more information.
    Trash FAQ          
    Trash Permission Error
    Trash Permission Error (2)

  • Mail from Trash folder moves itself back to Inbox

    I've been having a bit of an odd problem lately -- items from my Trash automatically re-appear in my inbox. It seems to have started with an e-mail from about three months ago, and whenever I click away to another folder (Sent, Drafts, etc.) and then click back to Inbox, another e-mail (in sequence according to date) will re-appear.
    I have been simply deleting the revived e-mails (assuming they would go back to the trash folder), but I just found out that if I delete one of these e-mails, they are deleted for good.
    My trash folder contains approximately 2700 e-mails, and I know I need to look for a mail archival program, but the problem isn't related to a "limit" on e-mails in a folder as far as I can tell.
    Anybody have any idea as to what might cause this problem?
    Any info would sure be appreciated!
    Thanks in advance,
    DAVE
    MacBookPro   Mac OS X (10.4.6)  

    Is there a reason you keep accumulating mail in the Trash mailbox and never permanently erase it? Using the Trash for archiving purposes just doesn't make sense to me. Why don't you create a custom "On My Mac" mailbox folder for that?
    The following is what I would recommend to someone having your problem in "normal" circumstances. Your situation is clearly unusual, so don't blame me if it doesn't work for you
    1. Quit Mail.
    2. In the Finder, go to HOME/Library/Mail/. You may want to make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
    3. Locate the Envelope Index file and move it to the Desktop (to be deleted later if this fixes the problem).
    4. Launch Mail again and let it finish re-indexing everything -- it says it's "importing", but it's just re-creating the Envelope Index file.

Maybe you are looking for

  • Is it possible to have many users share the same account folder in HD Users?

    Hi! New guy here. I'm trying to set up somekind of Schedule for me to be able to use my mac only in the morning and only in the evening. Parental control seems to be able to allow me to do that if i set up two different accounts and assign time limit

  • FCE HD, confused by Motion Path (I want to change the speed of movement)

    I am a huge FCE noob, let's get that out of the way. I have also been a member here since May of last year, but for some reason it now shows that this is my first post. (????) Anyway, I have figured out how to use a motion path, including curving the

  • How to get last value

    Hi i have a senerion in which i want to get the last value :- CREATE TABLE T1 (NAME VARCHAR2(10), NO NUMBER, NO2 NUMBER); INSERT INTO T1 VALUES('A',10,20); INSERT INTO T1 VALUES('C',100,2); INSERT INTO T1 VALUES('B,124,5); INSERT INTO T1 VALUES('A',1

  • IDoc acknowledgement again :)

    Hi Expers i am realy strugling with IDOC acknowledgement!! i am following the Howtodo doc https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb.. According to this document page no 3(scenario 2. Exte

  • Shape file encode in UTF-8

    hi all, I am interested to import shape file which is encode in UTF-8. When i import shape file with the help of map builder, i lost my Unicode character. NLS_NCHAR_CHARACTERSET value of my data base is AL16UTF16 Any suggestion how i can import these