Accessing Txt from Garmin Nuvi GPS fails

I have a W508 and I am using it in the car with a Garmin Nuvi 300 GPS. Originally it worked fine. But now, the GPS freezes every time a new txt arrives. It starts to access the phone and then just hangs.
Any ideas anyone ?

I figured that it might be the number/size of messages as well. So, I deleted almost all of them (except 7).
Now it fetches everything. The twist is that it displays messages I have already deleted. It will not display new ones that come in. How the heck can it display deleted messages ? I am guessing that either its accessing the sim (which may still have them) or they are saved in the gps. I will try refreshing the sdcard followed by pairing/unpairing.
Thanks

Similar Messages

IPhone and Garmin Nuvi GPS

Besides my Motorolla headset, I managed to pair my iPhone to my Garmin Nuvi 360 GPS with no problems. This particular Nuvi model as well as some other Garmin models have Bluetooth built in. The benefits of this device is that besides the wonderful Nuvi GPS features, the device is also a car kit with speaker and microphone. What I found quite remarkable was that during the pairing, the entire phonebook I have on my iPhone came over as well. So, when someone on that list calls, their name comes up on the touch screen. Or if you want to call someone, either click through or search the directory on the Garmin. Very cool.
Powerbook Mac OS X (10.4.4)

iPhone works with my Garmin Nuvi 360 via bluetooth, downloaded address book and all, but after a day or two the connection stops working (iPhone says they’re paired, but Nuvi doesn’t show phone icon) and I have to manually set up the connection again. Anyone else having this problem?
Thanks.

Would a rear view camera work with a garmin nuvi GPS

If I buy a garmin nuvi with Bluetooth would a Bluetooth rear view car camera work with it.

Only a few garmin models allow a back up camera to be connected. Check the link below for what garmins have this option.
https://support.garmin.com/support/searchSupport/case.faces?caseId=%7B22ca4500-2009-11df-d1b4-000000...
The Garmin 760LMT is the only one I could find on BestBuy.com that has this options.
http://www.bestbuy.com/site/Garmin+-+dezl+760LMT+7%26%2334%3B+GPS+with+Built-In+Bluetooth/7352055.p?...
You will also need a cable and a back up camera for it to work.
https://buy.garmin.com/shop/shop.do?pID=70938

Garmin nuvi gps causes mac to freeze up

I just purchased a Garmin nuvi3490 GPS. When I connect the usb to my imac, the mac freezes up and I have to use the switch to turn the computer off, unplug it and wait before I can turn it on again. The Garmin icon doesn't show up as an attached device. Has anyone else encountered this problem?

You might want to contact Garmin about this. Sounds like you might have a bad GPS. I have 3 garmins and have never had an issue connecting them to my iMac or MBP.

Listening to Audiobook from iTunes on my Garmin Nuvi

I have just gotten a Garmin Nuvi GPS unit that comes with a Audible.com player. I have bought some audiobooks from the iTune store and I would like to listen to them on my GPS. How can I play the.m4b files on the player? Can I convert them from m4b to aa? Or is there a different player that I can install on the GPS that will play m4b files? I looked at some software to convert to mp3, but it looks a bit dodgy to me and I am not looking to make illegal copies or anything like that.

Hi. I was on the phone with the folks at Garmin and they said that if you want to play music, podcasts, and audio books you do have to bump the files down to mp3 files instead of mp4.
However, I saw on Amazon that the Garmin Nuvi 350 is being sold for $100 off if you get a monthly subscription to audible.com.
Not sure how that would work.
Hope this helps.

Accessing txt files in the App server from web application

Hi All,
We have a use case, where we need to access txt files from the ADF web application.
We will display to the user the path of the file and whenever he/she clicks, it should be downloaded automatically to the users machine.
Environments we need to develop: JDeveloper 10.1.3.4 and Oracle App Server 10.1.3.1
And our server has credentials and only those who have access to the server can access the files.
Point me or suggest me a good solution to this use case.
Regards,
Naga.

Hi Joonas,
i was able to download the files, thanks a lot for your guidance. i will mark your answer as correct.
Can you let me know how to achieve the following usecase.
1. there will be multiple text files in the server i.e., out of our web application context like in some folder
2. And we need to give user a http link and if he clicks on the link that file should be downloaded automatically to his machine.
and we are using oracle app server 10.1.3.4, please point me to some document or example.
thank you.
naga.

I can no longer access Yahoo from desktop icon; attempt to report this to Firefox fails. Help.

I have always been able to access Yahoo from my desktop icon. In the last few days, this has not worked 90% of the time (once in a while I can get through). I need to access it through my Verizon account. Why is this suddenly happening - for years I have been able to use the Yahoo icon.
And when I tried to send a help message to Firefox it refused to go through - the green line would go over and over and never finish.

What do you mean when you say you "can no longer access these sites?" Does that mean you can't connect to those sites in your web browser, or that they aren't showing up in iWeb?
If the latter, note that your iWeb data is all entirely stored in a hidden file. In the Finder, choose Go -> Go To Folder and paste the following path into the window that opens:
~/Library/Application Support/iWeb
In that folder, you will find a single file, called Domain. That's got all the data for all your iWeb sites. If that file is missing, or if it has become corrupt, you will need to restore it from an earlier backup.
As for replacing iWeb, either Sandvox or RapidWeaver should work. Which works best will depend on your own tastes. Note that neither is capable of fully importing iWeb sites, as those sites will have a lot of content that is copyrighted by Apple. For more information about transitioning to one of these products, see:
http://rapidweaverfaq.org/site/migrating_from_iWeb.html
http://www.karelia.com/sandvox/help/z/Transitioning_from_iWeb.html

Problems Pairing with Garmin Nuvi 265W

Bought a new Garmin Nuvi 265W GPS. Set the unit up. It paired immediately with iPhone and worked without issue. Then as a last step in the setup I registered the Nuvi with Garmin. Big mistake. During the registration Garmin wrote something to the Nuvi and toasted the iPhone pairing. Unit goes into an on/off do loop. Resetting and restoring doesn't help. Unpaired the iPhone and deleted it from the Nuvi so at least it's back working. Garmin doesn't know why what they write during the registration process causes the problem and said there is no way to go back. I've got V2.2 on my iPhone. Anybody have a similar problem and know of a work around to get the pairing to work again?

I bought a Garmin 265WT recently and could pair my iPhone 1st generation to the unit but it would constantly reboot the Garmin unit. After reading all the support forums and upgrading to the latest software releases on both my iPhone and Garmin 265WT
I could not get the problem resolved running the below software/firmware:
iPhone 2.2 and 2.2.1
Garmin 4.8 with Bluetooth Firmware 1.7
I finally called Garmin and they shipped me another unit. The new unit worked without any problems even with older software and firmware. Seems as if the reboot problem might be more than just software and firmware related.
My iphone at this point is running 2.2.1 but the below software and firmware revisions of the new Garmin 265WT worked:
The new unit came with software:
Software Version 4.40
GPS SW Version 2.38b
Bluetooth SW Version 1.65
This worked no problem with bluetooth. No reboots....
I even upgraded to:
Software Version 5.0
Bluetooth SW Version 1.7
The unit still worked no problem. I can only suspect the issue here is hardware related in some cases. So for some people the upgraded software/firmware may work. But if you are running both iPhone 2.2.1 (1st Gen Phone) and the latest software and Bluetooth firmware and still have the problem I would call Garmin and have them replace the unit.

Bluetooth connectivity to a nuvi gps

my original iphone pairs with my nuvi gps unit but then the nuvi shuts down
when i unpair the unit works fine... my firmware on the nuvi gps is up todate
any one else have this problem

There is an update from Garmin to v5.0, I had the same reboot issue until I applied the 5.0 update. Since then my 285WT and iPhone get along great.
Hope this helps.

Problems pairing with Garmin Nuvi 1310 sat nav

I have been trying to connect to a Garmin Nuvi 1310 sat nav. It set up first time, however when I switch off the sat nav and then turn it back on my phone will not connect automatically. I have to remove it from the list on the Garmin and start all over again. Surely this can't be right, my old iPhone re-connected automatically everytime. Is there a setting I need to adjust?

I bought a Garmin 265WT recently and could pair my iPhone 1st generation to the unit but it would constantly reboot the Garmin unit. After reading all the support forums and upgrading to the latest software releases on both my iPhone and Garmin 265WT
I could not get the problem resolved running the below software/firmware:
iPhone 2.2 and 2.2.1
Garmin 4.8 with Bluetooth Firmware 1.7
I finally called Garmin and they shipped me another unit. The new unit worked without any problems even with older software and firmware. Seems as if the reboot problem might be more than just software and firmware related.
My iphone at this point is running 2.2.1 but the below software and firmware revisions of the new Garmin 265WT worked:
The new unit came with software:
Software Version 4.40
GPS SW Version 2.38b
Bluetooth SW Version 1.65
This worked no problem with bluetooth. No reboots....
I even upgraded to:
Software Version 5.0
Bluetooth SW Version 1.7
The unit still worked no problem. I can only suspect the issue here is hardware related in some cases. So for some people the upgraded software/firmware may work. But if you are running both iPhone 2.2.1 (1st Gen Phone) and the latest software and Bluetooth firmware and still have the problem I would call Garmin and have them replace the unit.

Unable to access values from database in login page..

Hey all,
Friends I have a login.jsp page and I want if i enter username and password then it will be accessed from database and after verifying the details it will open main.jsp.I made a database as "abc" and created DSN as 1st_login having table 1st_login. But the problem is that I am unable to access values from database.
So Please help me.
Following is my code:
<HTML>
<body background="a.jpg">
<marquee>
                    <CENTER><font size="5" face="times" color="#993300"><b>Welcome to the"<U><I>XYZ</I></U>" of ABC</font></b></CENTER></marquee>
          <br>
          <br>
          <br>
          <br><br>
          <br>
     <form name="login_form">
          <CENTER><font size="4" face="times new roman">
Username
          <input name="username" type="text" class="inputbox" alt="username" size="20" />
          <br>
     <br>
          Password
          <input type="password" name="pwd" class="inputbox" size="20" alt="password" />
          <br/>
          <input type="hidden" name="option" value="login" />
          <br>
          <input type="SUBMIT" name="SUBMIT" class="button" value="Submit" onClick="return check();"> </CENTER>
          </td>
     </tr>
     <tr>
          <td>
          </form>
          </table>
<%
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection connection = DriverManager.getConnection("jdbc:odbc:1st_login");
Statement statement = connection.createStatement();
String query = "SELECT username, password FROM 1st_login WHERE username='";
query += request.getParameter("username") + "' AND password='";
query += request.getParameter("password") + "';";
ResultSet resSum = statement.executeQuery(query);
//change: you gotta move the pointer to the first row of the result set.
resSum.next();
if (request.getParameter("username").equalsIgnoreCase(resSum.getString("username")) && request.getParameter("password").equalsIgnoreCase(resSum.getString("password")))
%>
//now it must connected to next page..
<%
else
%>
<h2>You better check your username and password!</h2>
<%
}catch (SQLException ex ){
System.err.println( ex);
}catch (Exception er){
er.printStackTrace();
%>
<input type="hidden" name="op2" value="login" />
     <input type="hidden" name="lang" value="english" />
     <input type="hidden" name="return" value="/" />
     <input type="hidden" name="message" value="0" />
     <br>
          <br><br>
          <br><br>
          <br><br><br><br><br>
          <font size="2" face="arial" color="#993300">
     <p align="center"> <B>ABC © PQR</B>
</BODY>
</HTML>
and in this code i am getting following error
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:93: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:93: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:94: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:95: cannot find symbol_
4 errors
C:\Project\SRS\nbproject\build-impl.xml:360: The following error occurred while executing this line:
C:\Project\SRS\nbproject\build-impl.xml:142: Compile failed; see the compiler error output for details.
BUILD FAILED (total time: 6 seconds)

As long as you're unable to compile Java code, please use the 'New to Java' forum. This is really trival.
To ease writing, debugging and maintenance, I highly recommend you to write Java code in Java classes rather than JSP files. Start learning Servlets.

Can't access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser no

When I try to access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser not supported at this time". This happened to me while using my IPhone 5, a friend that uses an IPhone 6, and another friend that uses a Samsung Galaxy S5. I just need for my employees to be able to access, complete and submit work orders created in formscentral from their phones. I would like to use the data collection feature in formscentral but at this point any suggestions on how to accomplish this are welcomed. Thank you

Further info - I changed my security settings to allow apps from anywhere, and again tried to install. I again got an error message
that the update failed to install, and to contact Customer Support.

MBP Bluetooth connection to Garmin nuvi

Good morning, everyone!
I am trying to figure out if it is possible to pair my MBP (C2D) with my Garmin nuvi 660 gps unit. Rather, I've been able to pair the two devices, but the nuvi expects to be paired to a phone, so it doesn't recognise the MBP or any files I try to send. Basically, I want to be able to send image files and mp3's to the nuvi.
Does anyone have any ideas on this? (I've also posted this question on a couple of gps boards.)
Thanks!
gonzomup

I have the same problem. I think that neither of the companies have the will to solve this issue. I have always been a fan of Nokia, so this is really disappointing.

Accessing COM from Java using JCOM

When I tried to access a simple COM component with the com2java generated files,
I got the following error. Can someone help me with this?
<Nov 8, 2001 3:37:24 PM CST> <Error> <HTTP> <[WebAppServletContext(366665,Defaul
tWebApp,/DefaultWebApp)] Servlet failed with IOException
AutomationException: 0x80070005 - General access denied error
at com.bea.jcom.bm.b(bm.java)
at com.bea.jcom.Rpc.a(Rpc.java)
at com.bea.jcom.bf.a(bf.java)
at com.bea.jcom.Dispatch.createDispatch(Dispatch.java)
at com.bea.jcom.Dispatch.<init>(Dispatch.java)
at com.ak.jcomtest._JComTestProxy.<init>(_JComTestProxy.java:33)
at com.ak.jcomtest.JComTest.<init>(JComTest.java:105)
at com.ak.jcomtest.JComTest.<init>(JComTest.java:77)
at jsp_servlet.__jcom._jspService(__jcom.java:91)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2456)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>

I did everything earlier except the second point you mentioned. Everything started
working as soon as I added a line to call com.bea.jcom.AuthInfo.setDefault() method.
I didn't think this was necessary since I already gave permissions to that user
using DCOMCNFG. Thanks for you help.
"BEA jCOM Support" <[email protected]> wrote:
>
Your jcom.log indicates you are trying to access the COM object with
Authentication
"BXDOMAIN/akumar". Add this user to the default access/launch permissions
(using
DCOMCNFG) on the machine hosting the COM object.
Also, make sure you put this in your Java code:
com.bea.jcom.AuthInfo.setDefault("BXDOMAIN", "akumar", "<password>");
"Anil Kumar" <[email protected]> wrote:
Here's the log
jCOM checkconfig 6.1 Beta - Copyright (C) 2001 BEA Systems, Inc. Copyright
(C)
1999-2001 Linar Ltd. and Intrinsyc Software, Inc. http://www.bea.com/jcom/
--- Checking OS ---
Microsoft Windows NT 5.0 (Build: 2195) Service Pack 2
--- Checking Time ---
Time: 15:20:49
Date: 11/13/01
--- opening typelib: JComTestProject.exe ---
Class Name = JComTest
Class Id = 742db055-77df-404a-a579-e0cbfd3007a7
Class Name = JComTestProject.JComTest
AppID = {742DB055-77DF-404A-A579-E0CBFD3007A7}
{742DB055-77DF-404A-A579-E0CBFD3007A7} = JComTestProject.JComTest
Implemented Categories = no value(259)
{40FC6ED5-2438-11CF-A3DB-080036F12502} = no value(259)
LocalServer32 = D:\Program Files\Microsoft Visual Studio\VB98\Projects\JCom\JComTestProject.exe
("D:\Program Files\Microsoft Visual Studio\VB98\Projects\JCom\JComTestProject.exe"
file exists)
ProgID = JComTestProject.JComTest
Programmable = no value(259)
TypeLib = {E0BF28D6-6347-4017-8D2E-52B145CE47DA}
VERSION = 2.0
--- Checking Username ---
USER:WARANGAL\akumar
GROUP:WARANGAL\None
GROUP:\Everyone
ALIAS:WARANGAL\ORA_DBA
ALIAS:BUILTIN\Administrators
ALIAS:BUILTIN\Users
ALIAS:BUILTIN\Power Users
GROUP:\LOCAL
GROUP:NT AUTHORITY\INTERACTIVE
GROUP:NT AUTHORITY\Authenticated Users
--- Checking DCOM settings ---
DCOM version supports accessing Java from COM
EnableDCOM = Y
DefaultLaunchPermission:
Access enabled for NT AUTHORITY\SYSTEM
Access enabled for NT AUTHORITY\INTERACTIVE
Access enabled for BUILTIN\Administrators
--- Connecting to SCM ---
Connecting to SCM on localhost
Connect successful
--- IP configuration ---
Hostname = warangal.bxsys.com
Address 0 = 172.18.32.102
Connecting to SCM on 172.18.32.102
Connect successful
Address 1 = 169.254.25.129
Connecting to SCM on 169.254.25.129
Connect successful
--- Winsock Information ---
Version: 202
Description: WinSock 2.0
--- Environment Variables ---
ALLUSERSPROFILE=C:\WINNT\Profiles\All Users
APPDATA=C:\WINNT\Profiles\anil\Application Data
BOOKSHELF=D:\ifor\WIN\BIN\EN_US
CLASSPATH=.;d:\mystuff\javastuff\jarz;d:\weblogic\lib\weblogic510sp6boot.jar;d:/jdk122/javamail112/mail.jar;d:/jdk122/jaf-1.0.1/activation.jar;d:/jdk122/jsdk2.1/server.jar;d:/jdk122/jsdk2.1/servlet.jar;D:\WebLogicCommerceServer3.2\classes;D:\Oracle\Ora81\jdbc\lib\classes111.zip;D:\weblogic\lib\WebLogic_RDBMS.jar;D:\Oracle\Ora81\orb\classes\yoj.jar;D:\Oracle\Ora81\orb\classes\share.zip
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=WARANGAL
ComSpec=C:\WINNT\system32\cmd.exe
HELP=D:\IBMVJava3.0\eab\;D:\IBMVJava20\eab\;D:\ifor\WIN\BIN
HOMEDRIVE=C:
HOMEPATH=\
I4_INSTALL_DRIVE=D:
I4_LANG=EN_US
IPF_PATH32=D:\ifor\WIN\BIN\EN_US
J2EE_CLASSPATH=D:\j2ee121\lib\cloudscape\cloudspace.jar;
JAVA_HOME=d:\jdk13
LOGONSERVER=\\WARANGAL
NLSPATH=D:\ifor\LS\MSG\%L\%N
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Os2LibPath=C:\WINNT\system32\os2\dll;
Path=d:\jdk13\bin;D:\Oracle\Ora81\bin;D:\Oracle\Ora81\orb\bin;C:\WINNT;C:\WINNT\system32;C:\WINNT\system32\WBEM;d:\jdk13\bin;D:\CVS;D:\ifor\WIN\BIN;D:\ifor\WIN\BIN\EN_US;D:\JavaStuff\jakarta-ant-1.3\bin;D:\BEA\wlserver6.1\jcom\bin;D:\WebGain\VisualCafe\Java2\Bin;C:\Program
Files\Common Files\WebGain Shared;D:\WebGain\VisualCafe\Bin;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 8 Stepping 3, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0803
ProgramFiles=C:\Program Files
PROMPT=$P$G
StarTeam=D:\StarTeam 4.0\StarTeam.ini
StarTeamApp=D:\StarTeam 4.0
STLicense=D:\StarTeam 4.0
SystemDrive=C:
SystemRoot=C:\WINNT
TEMP=D:\TEMP
TMP=D:\TEMP
USERDOMAIN=WARANGAL
USERNAME=akumar
USERPROFILE=C:\WINNT\Profiles\anil
windir=C:\WINNT
WorkstationID=D:\StarTeam 4.0\ConnectionManager.ini
"Damon Hon" <[email protected]> wrote:
hi anil,
can you run the checkconfig tool as well
checkconfig /typelib <path to tlb> config.log
and post the log
thanks
damon
"Anil Kumar" <[email protected]> wrote in message
news:[email protected]...
Hi Damon,
I am just calling the default constructor of the com2Java generatedclass(in this
case, it is JComTest.class) from a simple JSP. I am not calling anymethods on
this component. Here are the contents of the log file.
jCOM version 6.1 Beta logger started in immediate mode at Tue Nov
13
12:32:41
CST 2001 at level 3 (VERBOSE)
License:
Classloader is bootstrap
java.version is 1.3.1
java.vendor is Sun Microsystems Inc.
java.class.path is..;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;D:\BEA\wlserver6.1\jcom\lib\jcom.
jar;D:\Projects\JCom\src
java.library.path isD:\BEA\jdk131\bin;.;C:\WINNT\System32;C:\WINNT;.\bin;d:\jdk13\bin;D:\Oracle\
Ora81\bin;D:\Oracle\Ora81\orb\bin;C:\WINNT;C:\WINNT\system32;C:\WINNT\system
32\WBEM;d:\jdk13\bin;D:\CVS;D:\ifor\WIN\BIN;D:\ifor\WIN\BIN\EN_US;D:\JavaStu
ff\jakarta-ant-1.3\bin;D:\BEA\wlserver6.1\jcom\bin;D:\WebGain\VisualCafe\Jav
a2\Bin;C:\Program
Files\Common Files\WebGain Shared;D:\WebGain\VisualCafe\Bin;
os.name/os.arch/os.version is Windows 2000/x86/5.0
1005676361251 +: New RemOxidResolver initialised for Net={{ 0x7,127.0.0.1[135]}}
Sec={}
1005676361271 +: Looking for free connection handler to 127.0.0.1[135]for
BXDOMAIN/akumar
1005676361311 : OXID Resolver started. Listening on port 3895
1005676361321 : Object Exporter binding is Net={{ 0x7,172.18.32.102[3896]},
{ 0x7, 169.254.25.129[3896]}} Sec={{ 0xa, 0xffff, }, { 0x0, 0x0,
OXID
is 1005676361311
1005676361331 +: Opening a TCP/IP connection to 127.0.0.1[135] withauth
BXDOMAIN/akumar
1005676361361 : Sending RemoteActivation request to Net={{ 0x7,127.0.0.1[135]}}
Sec={} to activate cls/iid742db055-77df-404a-a579-e0cbfd3007a7/fbcd1246-3557-4b95-8046-cfec093310b5
1005676361832 : Sending IRemoteActivation::RemoteActivation request,with
RPC
call id 2 on ipid null
1005676361892 : Received the response toIRemoteActivation::RemoteActivation
request, with RPC call id 2
1005676361902 +: Remote server's version: 5.1
1005676361942 *: Error activating742db055-77df-404a-a579-e0cbfd3007a7/fbcd1246-3557-4b95-8046-cfec093310b5:
AutomationException: 0x80070005 - General access denied error
"Damon Hon" <[email protected]> wrote:
hi anil,
can you post the snippet of java code that is calling the methods
from your COM object and post the following logs
jcom.log
- In your java code, add the following line to the start of your
initialization code.
com.bea.jcom.Log.logImmediately(3, "c:\\temp\\jcom.log");
config.log
- Run the checkconfig utility to generate this log
checkconfig /typelib <path to tlb> config.log
thanks
damon
"Anil Kumar" <[email protected]> wrote in message
news:[email protected]...
Thanks for the info. I had already done this before. I checked
everything
a dozen
times. I am not sure why this is happening. Please let me know,
if
there
are any
other ideas.
"Damon Hon" <[email protected]> wrote:
hi anil,
The exception you are getting, indicates that your java client
does
not
have
sufficient permissions to access your com component.
if you are running your java code and com component on the same
machine,
- make sure that your jcom/bin directory is in your path environment
variable
- run the DCOMCNFG tool to configure accesss for the interactiveuser
or the
user you are logged in as.
if you are not running your java code under windows, add this
call
in
your
java code:
com.bea.jcom.AuthInfo.setDefault("nt domain", "user", "password");
- use the DCOMCNFG tool to configure has dcom access to the
com
component for this user
let me know if this helps
damon
"Anil Kumar" <[email protected]> wrote in message
news:[email protected]...
When I tried to access a simple COM component with the com2java
generated
files,
I got the following error. Can someone help me with this?
<Nov 8, 2001 3:37:24 PM CST> <Error> <HTTP><[WebAppServletContext(366665,Defaul
tWebApp,/DefaultWebApp)] Servlet failed with IOException
AutomationException: 0x80070005 - General access denied error
at com.bea.jcom.bm.b(bm.java)
at com.bea.jcom.Rpc.a(Rpc.java)
at com.bea.jcom.bf.a(bf.java)
at com.bea.jcom.Dispatch.createDispatch(Dispatch.java)
at com.bea.jcom.Dispatch.<init>(Dispatch.java)
at
com.ak.jcomtest._JComTestProxy.<init>(_JComTestProxy.java:33)
at com.ak.jcomtest.JComTest.<init>(JComTest.java:105)
at com.ak.jcomtest.JComTest.<init>(JComTest.java:77)
at jsp_servlet.__jcom._jspService(__jcom.java:91)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2456)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2039)
at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>

RAC-DATA FILE ACCESSING ISSUE FROM ONE NODE

Dear All,
We have a two node RAC (10.2.0.3)running on Hp Unix. From yesterday onwards, from one instance accessing data from a specific data file showing the below error, whereas accessing from other node to the same datafile is working properly.
Errors in file /oracle/product/admin/tap3plus/bdump/tap3plus4_dbw0_24950.trc:
ORA-01157: cannot identify/lock data file 75 - see DBWR trace file
ORA-01110: data file 75: '/dev/vg_rac/rraw_tap3plus_temp_live05'
ORA-27041: unable to open file
HPUX-ia64 Error: 19: No such device
Additional information: 2
Tue Jan 31 08:52:09 2012
Errors in file /oracle/product/admin/tap3plus/bdump/tap3plus4_dbw0_24950.trc:
ORA-01186: file 75 failed verification tests
ORA-01157: cannot identify/lock data file 75 - see DBWR trace file
ORA-01110: data file 75: '/dev/vg_rac/rraw_tap3plus_temp_live05'
Tue Jan 31 08:52:09 2012
File 75 not verified due to error ORA-01157
Tue Jan 31 08:52:09 2012
Thanks in Advance

user585870 wrote:
We have a two node RAC (10.2.0.3)running on Hp Unix. From yesterday onwards, from one instance accessing data from a specific data file showing the below error, whereas accessing from other node to the same datafile is working properly.That would be due to some kind of failure in the shared storage layer.
RAC needs the very same storage layer to be visible and available on each RAC node - thus this needs to be some form of shared cluster storage.
Should a piece of it fails on one node, that node would not be able to access the RAC database files on that shared storage layer - and will throw the type of errors you are seeing.
So how does this shared storage layer look like? Fibre channels (HBAs) connected to a Fibre Channel Switch and SAN - making SAN LUNs available as shared storage devices?
Typically a shared storage failure would throw errors in the kernel log. This is because the error is not an Oracle error, but a kernel error. As it is in your case. The bottom error on the error stack points to the root cause:
ORA-01157: cannot identify/lock data file 75 - see DBWR trace file
ORA-01110: data file 75: '/dev/vg_rac/rraw_tap3plus_temp_live05'
ORA-27041: unable to open file
HPUX-ia64 Error: 19: No such device
So HP-UX on that node is not seeing a specific shared storage device.

Accessing Txt from Garmin Nuvi GPS fails

Similar Messages

Maybe you are looking for