Accessing via IPOD Touch - I don't know my password

I have a WRK54G Wireless-G Broadband Router. I have 2 computers and my printer directly connected to 3 of the 4 ports. At one time I had a laptop that I used wirelessly with the router, but have not used it for a couple of years. I would like to be able to access the network with my IPOD Touch, but I do not know my password. I would therefore like to set up a new password. How do I do that if I don't know my password?

To find out the Password for your linksys router, you need to login to the routers setup page.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...( In case "admin" password dosent work, then you need to input the password which you must have used when you configured your router for the 1st time). 
Click on the Wireless tab
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
In this window you will find your security key, not down your security key and when you connect your IPOD to your wireless network and if it prompts you for the password, just input your security and click on connect and you should be able to go online wirelessly from your IPOD. 

Similar Messages

  • Ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Maybe here:
    Trouble installing iTunes or QuickTime for Windows
    iOS: Device not recognized in iTunes for Windows
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • HT1212 my ipod touch is locked, i know the password although then i go to enter it nothing happens its as if the touch  screen isnt working, is there any way i can repoot the factry setting completely?

    My ipod touch is locked, i know the password although when i go to  enter it nothing happens it as if the touch screen isnt working, i have held down the power and home button to reset it, it works for a second then stops working again. is there anyway i can completely reset the factory settings

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I am trying to restore my old IPod but I don't know the password and it won't connect to Itunes

    I have been trying to unlock my old Ipod but I can't figure out the password and when I connect to Itunes it doesn't allow me to connect because I don't know the password. I have tried their solutions but they aren't working either.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Forgot password to iPod touch and don't know what to do!!!

    I do not know the password for my iPod touch! Its been a while since I was on it. Is there a trick to get back to the main menu on the iPod. Its disabled for and hour now. Any ideas??

    You must:
    Shut down the iPod (disconnect first)
    Hold the Home and Sleep buttons down until it asks you to shut down.
    Slide the slider and shutdown.
    Now, hold and KEEP HOLDING the Home button down while you connect the iPod to the computer.
    When prompted, restore as a new device.
    You'll have no data on the iPod - you'll need to sync again.
    Scott

  • How to unlock a ipod touch if i dont know the password

    I found it and i dont know the password and i hope you guys can
    Help to unlock it

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • I want to reset my ipod touch but i dont know my password?

    I want to reset my IpodTouch beacuse my brother turned of FacetTime and its asking for a password in order to do so.. but i dont know the password?
    Can someone please help

    You'll need to connect it to your iTunes library in recovery mode and restore it factory settings. Use this article for instructions on getting your iPod Touch into Recovery Mode.
    http://support.apple.com/kb/ht1808
    B-rock

  • I forgot my restrictions passcode for my iPod touch and don't know what to do plzz help

    How can I change a forgotten restriction passcode for iPod touch

    If you can't remember the Passcode, restore the device from the computer it was last synced with by placing the iPod in reocvery mode.
    Instructions here >  iOS: Unable to update or restore
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • Lost my ipod mode was activated and I don't know the password

    So I decided today to reset my ipod so I'd have 8 GB again. So I did and I enabled Lost my ipod and after when I was done it went into lost my ipod and I don't know the password. My computer won't allow me to restore it because it doesn't recognize it. Please help me.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1414 I am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no

    am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no luck till now

    If it is asking for the screen-lock passcode then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Otherwise follow varjak paw recommendation

  • Can not access home network via ipod touch, password entered  not accepted

    Can not access home network via ipod touch, password entered not accepted
    Trying to help my son set up his ipod touch to connect to the network and the password I entered is not accepted.
    1. Which password is required? I entered the password I use for logging into my router
    2. The home network is recognized, when selected it requires a password to be entered, but I am just not sure what password it is looking for to connect.
    I have not been able to find any information on this subject

    jersey0904, Welcome to the discussion area!
    You need to enter the wireless encryption password... not the administrative password for the router.

  • TS3694 my ipod is locked and i need to update my ipod but i don't know how HELP

    my ipod is locked and i need to update my ipod but i don't know how HELP

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    When you restore the iPod will also be updated. Make sure that you have iTunes version 11 on the computer.

  • Attempting to connect my MacBook to my 4s iPhone.  I have had them connected in the past to use the "hand off" function. Today it tells me "network unavailable"  make sure network access is enabled.  I don't know what to do.

    Attempting to connect my MacBook to my 4s iPhone.  I have had them connected in the past to use the "hands off" function. Today it tells me "network unavailable"  make sure network access is enabled.  I don't know what to do. I love the hands off feature as my iPhone is never with me when on my mac! I'm not sure what to do.  Both are "discoverable" via bluetooth and show up on each device but when I try to connect it says "network unavailable".  HELP!

    An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
    If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

  • How can i access my sons laptop computer to set up security if i don't know his password'

    How can i access my sons laptop computer to set up security if i don't know his password?

    If you have your own admin account on his computer, then you don't need to access his account.  However, what type of security do you mean?  If you mean network security then that is done in the router, not the computer.  If you are referring to Parental Controls those need to be configured via an admin account - either his or yours.

  • HT1320 Hello! My name is Ed. I'm having trouble with my Ipod classic, it keep freezing up on me and i can't unfreeze my Ipod. I hold down the menu button on the wheel and still won't do anything. All my Ipod classic do this. But my Ipod Touch, I don't hav

    Hello, my name is Ed. I'm with all my Ipod, I have (4) they all keep freezing up on me when I play my devices. But my Ipod Touch I don't have this problem. On my classic I'll hold down menu botton on the wheel. But thing happen, I'm tired of letting battery go dead and recharge it, just to freeze up again. I made it work one time by holding down the menu button. That's  about it. I need help.
    Ed Shelton
    PS I don't know operation system on my ipod classic, but on my mac book pro i am using (11.0.2) my mac os x (10.6.8). So, I try to take a quess at my os my classic

    Holding down the center/select button and the menu button will reboot your ipod. See if that helps. Also, I'd recommend something else- I had nothing but trouble with my ipod classic until I spent $20 to get Mac OS Mountain Lion. It did what you said and sometimes wouldnt play, or wouldnt power on...
    Try rebooting your ipod and let me know what happens and maybe in the future obtain Mountain Lion to aide your ipod in functionality.
    Good luck!

Maybe you are looking for

  • Unidentifiable duplicates in catalog

    I'm trying to help my mom who is having a problem with Photoshop Elements 9. I think what she's done has been some mixture of accidental move, delete or restore of some photos via Windows Explorer - I'm actually not quite sure what she's done. I can

  • Just updated to 7.0.4 and now i get the pop-up saying, "connect to itunes to get push notifications".  Why and how do I fix this?

    I have an IPhone 4 and it is not Jail Broken nor has it ever been.  If I restore to last backup will i lose saved info in notes, games, etc?

  • Error in upgrade in TOOLIMPD3 phase

    hi all, we are getting eror in TOOLIMPD3 phase while doing upgrade. as per the log.... ERROR: 1 activities have been aborted in TOOLIMPD3. ERROR: Operation(s) not completely processed.        Remaining change requests found in buffer PRD.        Igno

  • Tandberg - Video Conference Question

    Hello - I was wondering if a Tandberg camera could video conference with a webcam and if so, how? Would there need to be a 3rd party software to connect the two? Here at our foundation to do a lot of video conferencing however the people on the other

  • HT1492 Single user mode not working.

    Whenever I hit command-s to go into single user mode it doesn't work. I used to do it all the time to help my grandma who doesn't let me know her password, but always forgets it reset her computer. Please help!