Accessing web services for leave process

Hi,
We are looking to make a webesrvice for the leave process in ESS.
1. Are there any standard webservices that SAP provides for this process in ECC6? If yes, how do i access them in the portal?(I am unable to find the services in SICF)
2. If there are no standard webservices then i would like to make the BAPI's that SAP uses in the standard ESS package in portal and make them as web services. When i try to make it as a web service i get a error that web service cannot be created. Any pointers to resolve this error?
3. Is there any standard URL that i can pass in the portal for a WSDL system and access all the webservices available in ECC6 through thus URL.(Something like a web service repository).
Thanks in advance,
Arun

Hi Anton,
Thanks a lot for you quick response. Thanks for the info while using a BAPI, will keep this in mind before we decide to use the BAPI. We are looking at the option of using Visual Composer for the development. We are triying to create the WSDL System as per you suggestion using the URL
<b>http://<server>.<domain>:<httpport>/sap/bc/bsp/sap/webservicebrowser</b>
But this system fails in the connection tests in the portal with the error message
<b>Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.</b>
Iam sure of the user mapping because when i connect with the URL
<b>http://<server>.<domain>:<httpport>/sap/bc/bsp/sap/webservicebrowser/search.html</b> i get a page that shows a huge list of services.
But how can i access all these services in Visual Composer through a single system created in the portal?
Thanks again
Arun E V

Similar Messages

Web Service for bulk processing (inserts mostly)

In our case what we have is an interface table that needs to be populated by the web service.
On the web service provider side, we have created EO,VO and AM for this interface table and exposed the AM as a web service using the create and process Operation.
We tested our web service to insert a single row and it works fine. Consumers could do this in a loop to take in multiple rows but that may not be very efficient.
The web service consumer will be calling the web service based on the customer scheduling of the a job. So, at the time of the web service call, number rows to send (from consumers tables) could be any number (100 or 1k or 10k rows) based on the activity on that system.
What will be the most performant way for the consumer to populate data into our SDO and call our web service?
Are there examples that show how we can send bulk data using a web service?
This web service can also be used by 3rd party application (other than our internal applications). They may send data in an XML format. How can that be included in this web service without having to do different things for different types of consumers (internal or external).

I will not comment on "IIS recycle its workers process
". I don't think you have ever said its IIS is the web server used by yourt 3rd paty to host their web service. We (atleast I) don't know wheather your 3rd party's web service is hosted on IIS. It’s some "Web Server"
could be IIS (if its Microsoft based) or Apache or something else.
Come back to your question, when the error says "The request could not be
understood by server due to malformed syntax", when you’re sending the message as expected by 3rd party service, then it has nothing to do with your end, error is returned by your 3rd party. And as you have mentioned you are tracing the
messages thru Fiddler and you see messages are constructed same and fine as expected by your 3rd party. Don't confuse its nothing on your party, either first deployment or last. Check with your 3rd party
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to access/invoke Web Service from BPM Process

The following steps required to attach and invoke web service method from process:
1) Add a module in the catalog for ex WebServiceMO
2) Add WebService Catalog component demoWebService in WebServiceMO
3) Put ur WSDL address in WSDL address field like "http://localhost:8080/test/test?wsdl"
4) Click next to introspect the web service it will import required files and setting from the url to your project
5) Now for invoking webservice just call the method for ex.
@return as String[]
getTestStringList(TestInterfaceService, out @return : @return)
logMessage "web service calll result >>"+length(@return)+">>>"+@return[0]
Here @ return is the return from webservice call.
this way u can access web service from BPM process.
Edited by: Anurag Yadav on Jul 17, 2009 2:19 PM

I have a web service which does not return any value but when I introspect the web service, I have an out parameter to it.. Not sure why?
For e.g.
TestServiceListener.addTestNotes(TestNotes : testNotes, out TestNoteResponse : testNoteResponse);
So here I see an out parameter, but my web-service has no out parameter...
Any idea why is this happening?

XI for create web servicies for SAP R/3 4.6C

Hi All,
we are implementing PM (Plant Management) module of SAP R/3 4.6C and we have the necessity to create web services for some PM functionalities. Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI. Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly. So we think to use SAP EP.
Which is your opinion about this architectural scenario? Is it possible to fulfil the requirement of our business users with a more simple architectural solution (for example with WEB DYNPRO)?
Many thanks in advance for your collaboration.
Regards,
Bob

Infact we need to integrate our SAP R/3 4.6C with other applications (non-SAP) through TIBCO (it's mandatory). So we think to use SAP XI.
TIBCO is another middleware. So once you expose your R/3 functionalities as web service, you may directly use TIBCO to integrate and XI won't be required at all.
Moreover our users don't want to use SAP GUI for the accessing to the PM functionalities but they want an UI more friendly.
WebDynpro application would provide you an easy GUI and could act as Soap client as well to send data.
Regards,
Prateek

Not able to access web service with axis and tomcat

Dear all
i am trying to access web service using axis in tomcat.
i downloaded axis-bin-1_4.zip, unzipped it and installed it properly in tomcat.
i had tested axis, its working fine.
i had created a simple java class(a sample class from book) and deployed it in axis. i also created a client(a java consol class) for accessing that web service. but its giving error. i have no idea why this is comming.
plz point me in right direction.
thanks in advance
The error is:
Exception in thread "main" AxisFault
faultCode: {http://xml.apache.org/axis/}HTTP
faultSubcode:
faultString: (404)/axis/ArithmeticProcessor.jws
faultActor:
faultNode:
faultDetail:
        {}:return code: 404
<html><head><title>Apache Tomcat/6.0.14 - Error report</tit
le><style></style> </hea
d><body><h1>HTTP Status 404 - /axis/ArithmeticProcessor.jws</h
1><HR size="1" noshade="noshade"><p><b>
type</b> Status report</p><p><b>message</b> <u&
gt;/axis/ArithmeticProcessor.jws</u></p><p><b>descriptio
n</b> <u>The requested resource (/axis/ArithmeticProcessor.jws) is n
ot available.</u></p><HR size="1" noshade="noshade
"><h3>Apache Tomcat/6.0.14</h3></body></html>
        {http://xml.apache.org/axis/}HttpErrorCode:404
(404)/axis/ArithmeticProcessor.jws
        at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.j
ava:744)
        at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:144)
        at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrateg
y.java:32)
        at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
        at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
        at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
        at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
        at org.apache.axis.client.Call.invoke(Call.java:2767)
        at org.apache.axis.client.Call.invoke(Call.java:2443)
        at org.apache.axis.client.Call.invoke(Call.java:2366)
        at org.apache.axis.client.Call.invoke(Call.java:1812)
        at ArithmeticClient.main(ArithmeticClient.java:50)

Hi ,
Please go through this link and check in this way only you created the webservice correctly or not. If not follow and do it definitely will get you the webservice access by iphone or any application.
www.scribd.com/doc/19255987/Web-Services-in-Abap

Error at run time When Access Web Service in web dynpro java

Hi
I am used web service created on other machine.I am used wsdl file created in web service.
is there any setting on J2EE Engine server for accessing web service? after run web dynpro application it gives following error.
The initial exception that caused the request to fail, was:
   java.io.IOException: Unable to open connection to host "128.9.125.6:8000". Connection timed out:could be due to invalid address.
    at com.tssap.dtr.client.lib.protocol.Connection.openSocket(Connection.java:2117)
    at com.tssap.dtr.client.lib.protocol.Connection.open(Connection.java:1380)
    at com.tssap.dtr.client.lib.protocol.Connection.sendInternal(Connection.java:1534)
    at com.tssap.dtr.client.lib.protocol.Connection.send(Connection.java:1427)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    ... 50 more
please help me.
thank in advance

Hi,
java.io.IOException: Unable to open connection to host "128.9.125.6:8000". Connection timed out: could be due to invalid address. first check it are you able to connect the WSNavigator. I think you are not able to connect the WSNavigator and are you able to see the WebService in WSNavigator?
Procedure
To import a Web service model, proceed as follows:
       1.      Choose the context menu entry -
Create Model on the -
Models node of the relevant component.
       2.      In the model wizard, choose Import Web Service Model followed by Next.
       3.      In the second wizard window, enter a model name and specify the package and source code directory. The name of the proxy package is created automatically when you specify the model package.
       4.      Select whether your Web service source is from a local server, is addressed using a URL, or whether it is a UDDI service.
       5.      If you select Local File System or URL, choosing Next will take you to the following window in which you enter a local WSDL URL or select one by choosing Browse.
       6.      If you selected the option UDDI or URL, choosing Next will take you to the following wizard window in which you either enter a WSDL URL of a UDDI service directly or select one by choosing UDDIu2026
Enter the WSDL description of the Web service in the Wsdl field u2013 for example, http://webservices.matlus.com/scripts/emailwebservice.dll/wsdl/IemailService for an e-mail service.
You do not need to make any entries in the next step, Proxy Definition / URI Package Mappings. Choose Finish to close the window.
       7.      Switch to the Package Explorer view, select the file lport1.lp in the directory \src\packages\<myPackage>\, and check the port entries.
Hope this helps!!
Regards
Vijay

How to check error type in accessing web service?

Dear all,
I have created a form using WSDL connection to access web service in SOAP protocol.
But I have difficulties in error handling when acccessing web service.
I try to put a try catch block for the following statement :
ie. xfa.connectionSet.WebServiceDC.execute(false);
in case for any error, I can only catch message saying GeneralFault only.
Is there any extra object in the script that I can catch to handle for different error type?
e.g checking SOAP.? and where should I put the codes in?
Actualy I want to detect if network connection is not ok or if it fails to find ecert which is required under https connection
Rgds.

Have you tried the try catch block ?
See the error codes it responds with.
Then look through the properties of the Exception
try
    doInit();
} catch(err)
    var vDebug = "";
    for (var prop in err)
       vDebug += "property: "+ prop+ " value: ["+ err[prop]+ "]\n";
    vDebug += "toString(): " + " value: [" + err.toString() + "]";
    status.rawValue = vDebug;
function doInit()
    doWebServiceCallThatFails();
Have fun with these articles
http://blogs.adobe.com/formfeed/2009/06/collected_form_development_and.html
http://blogs.adobe.com/formfeed/2009/03/handling_javascript_exceptions.html

Create a Web Service for Exchange with form based authentication ?

I want to create a Web Service in Apex that can create appointments in my exchange calendar. Exchange is offering web services for that.
When i try to create the web service reference in Apex i provide the URL and my Exchange login, but it is failing.
The exchange guys told me, that there is a ISA Server running where i need to authenticate through a form.
Does anyone know, how i can implement a webservice in Apex, when the access to the wsdl url needs login through a form ?
Or : what other types of authentication does Apex know ? What possibilities do i have ?
Thanks for answers.
Bernd

Hi
Presume you've already found this information, but in case not ....
Exchange 2007 provides out of the box web services, see
http://msdn.microsoft.com/en-us/library/bb408417.aspx
As a disclaimer - neither myself of the team I work with have tried to use these web services within APEX.
Regards
Chris

Web Services for Oracle 8i

Is there any means for the Oracle 8i Platform to implement a Webservice to
access Business Logic in stored precedures?
We were evaluating IONA's XML Collaboration Suite and their Oracle Adaptor
but we are not satisfied with the level of control the adaptor provides.
Do you have any suggestions?
Best regards,
Andreas

Yes, you can publish stored procedures as Web services. Two approaches:
1. Check out the new Web services sample that came out the other day, example two where SQLJ is used to wrap a Java class as a stored procedure, the connection is then wired into the generated class and finally it is published as a Java Web service using Oracle9i JDeveloper 9.0.2. See:
http://otn.oracle.com/sample_code/tech/java/web_services/
and look at the Tax Calculator viewlet/code.
2. This is essentially the same way that the OC4J PL/SQL Web service samples work too (using SQLJ to generate a Java PL/SQL proxy), but the OC4J sample (url below), provides a more parametric way to pass the connection information to the proxy by using a parameter in the web.xml file. Check out:
http://download.oracle.com/otn/java/oc4j/how-to-web-services.zip
See the readme and work with the sample in plsqlws.zip
This one is a both better and worse from a developers perspective compared to the first Oracle9i Jdeveloper oriented example. The good part, depending on your perspective, is that it is all command line based (some people like this, some people don't) and uses the longer term approach to publishing stored procedures as Web services for Oracle9iAS with the parameters passed in via the web.xml. The bad part is the example is a little hard to follow because many of the pieces are already created for you rather than explaining how they were created. The first example at least shows pretty much all the steps but doesn't quite elegantly solve the connection problem that the OC4J sample does.
In July/August, Oracle9i JDeveloper will be updated to publish stored procedures using the Oracle9iAS infrastructure (basically the web.xml fix) ... although once you understand it, it is fairly easy to manually do it inside of JDeveloper.
Hope this gets you going.
Mike.

Not able to access Web services

Hi all,
I am trying to access web services using the transaction WSADMIN.
But when i give the authorization while generating the WSDL, the following error pops up:
<b>Technical Details of Soap Core Exception
Message Text: SRT: ASSERT failed: object reference not bound
Class: CL_SOAP_REGISTRY
Method: generate_wsdl
LocationID: 6
Program: CL_SOAP_REGISTRY==============CP
Include: CL_SOAP_REGISTRY==============CM00J
Line: 59</b>
Can anyboby share his/her insights in this regard?
Thanks,
Ankit

Hi Fernando,
Thanks for this.
I was able to activate and deactivate the services. But i was not able to test these services (HTTP 500 Internal server error).
Also the services which are listed in the trnx SICF are not present in the trnx WSADMIN (I am using trnx WSADMIN to go to the home page of the web service and download the WSDL file of the service). What may be the reason?
Is there some configuration setting which I am missing or is it some other problem?
Regards,
Ankit

How to consume/access web services in forefront identity manager 2010 r2

Hi,
I have one web service in c# for authentication so i want to integrate this web service in my FIM 2010 R2.I want to ask one more question how to consume/access web service of FIM 2010 R2,so please tell me how is it possible in FIM 2010 R2 and
anybody have any example for consuming/accessing web service step by step in FIM 2010 R2.
Regards
Anil Kumar

Here is some C# code that accesses FIM resource attributes from the web services via the FIM 2010 Resource Management Client which I mentioned in an earlier post:
using System;
using System.Collections.Generic;
using Microsoft.ResourceManagement.Client;
using Microsoft.ResourceManagement.ObjectModel;
namespace MyTest
public partial class ResourceAttribute
public ResourceAttribute()
public string GetTypeAndDisplayName(string objectID)
String ReturnValue = String.Empty;
using (Microsoft.ResourceManagement.Client.DefaultClient client = new DefaultClient())
client.ClientCredential = CredentialCache.DefaultNetworkCredentials;
client.RefreshSchema();
string query = String.Format("/*[ObjectId={0}]", objectID);
foreach (RmResource res in client.Enumerate(query))
String displayName = res.DisplayName;
String objectType = res.ObjectType;
ReturnValue = displayName + " (" + objectType + ")";
break;
return ReturnValue;
You would just need to define your bindings and endpoints in your web.config. This method will return the DisplayName and ObjectType for the resource with the ObjectId matching the objectID argument. If you need more information, please provide more specifics
for what you are trying to accomplish.
There are many code examples for this library on its CodePlex home:
http://fim2010client.codeplex.com/

Customizing Web Service for VC 7.10

Hi guys!
I need a big help for the topic "web services and VC".
I read the Scott's blog (The specified item was not found.) and it's great, web services working fine!
But if I would create custom web service (for example to insert google maps on vc model) what can I do?
I know, it's hard to explane all the web services technology and implementation (Java, C#, XML etc.) but if someone know some tutorial or web guides..
Thanks a lot guys!
Edited by: Andrea Davoli on Oct 21, 2008 3:39 PM

Hi Andrea,
I assume that you refer to VC 7.0... otherwise the question should be moved to the VC 7.1 forum...
The following blog contain also a video that show you the process in detail:
How to consume Web Services with Visual Composer 7.0
Also important SAP Notes regarding limitations, structure and pre-requisites are mentioned there.
In the SAP Help Portal you can find information about Web Services created within NetWeaver:
http://help.sap.com/saphelp_erp2005/helpdata/en/db/99c04ba22fe64f96a8651df68eab92/content.htm
Hope this helps,
Best Regards,
Luis

Really impossible to create a web service for JBoss using eclipse's WTP?

I'm starting to get nuts!!!
I'm an experienced J2SE and J2ME Java developer... but I have huge problems creating a web service using eclipse WTP!
The tutorials I found are for tomcat... But I want to code for JBoss and not for tomcat...!!!
There must be somebody out there with the same issues...
This tutorial works fine for Tomcat...
http://www.eclipse.org/webtools/community/tutorials/BottomUpWebService/BottomUpWebService.html
But if I do the same with JBoss... it's not possible to incoke my web service method... ok, I thought... just need to check google... BUT I didn't find any solution in the whole WWW. Found a lot of questions of people with the same problems... but no solution! :(
Still getting that:
ERROR [EngineConfigurationFactoryServlet] Unable to find config file. Creating new servlet engine config file: /WEB-INF/server-config.wsdd
I know a little bit what a wsdd does... but isn't it the job of the WTP to create that file???
I really hope you have some places for me to start, 'cause I don't know anymore places to ask for...
Maybe this is a JBoss issue... I don't know...
Or is there a tutorial on how to create a web Service using JBoss IDE?
Sascha

Hi Massimo,
Quiet a few points here.
1. Oracle Type objects do not map to XML Complex type
2. Oracle Type objects do not map to Apex Page Item Types
3. Apex Page Item types are substituted into the WS Request XML by a process which is part of the Web Service Reference creation through the Wizard in Apex.
>
After created the web service (without any errors), I click on test.
- I can select the Operation --> CREATE_LINGUA
- I can input data for Basic Authentication
- I can't view Input Parameters --> Report returned no rows.
I've tried with normal type like Varchar2 and all was ok.
Is possible in Apex to use web services based on complex type, tipically an Array?
>
As you have guessed the Wizard driven Web Service Reference definition process cannot handle complex types of input parameters required by a Request. By definition the number of complex types possible are infinite, so they are not likely to come built in.
Passing an array is no solution because finally the values passed have to be plugged into the right SimpleTypes inside a ComplexType in the Request.
Based on your WSDL your Request will be
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:cre="http://xmlns.oracle.com/orawsv/GRIMALDI/PKG_WEBSERVICES/CREATE_LINGUA">
   <soapenv:Header/>
   <soapenv:Body>
      <cre:SNUMBER-CREATE_LINGUAInput>
         <cre:PLINGUA-LINGUAT-CIN>
            <cre:LINGUAT>
               <cre:CODICE>?</cre:CODICE>
               <cre:DESCRIZIONE>?</cre:DESCRIZIONE>
            </cre:LINGUAT>
         </cre:PLINGUA-LINGUAT-CIN>
      </cre:SNUMBER-CREATE_LINGUAInput>
   </soapenv:Body>
</soapenv:Envelope>However, all is not lost. You can always use the UTL_HTTP package API to construct your Request.
Regards,

Can't enable web services for groups (wiki) in WGM

I'm having trouble creating a wiki on my server. More specifically, in WGM, I cannot enable web services for a group. The pull-down menu is accessible, but the only option is "(None)."
I have users and groups set up in OD (they are not local).
I have a working default web page.
I have web services enabled in Server Admin.
I can create and access user blogs.
My user and group folders are on a raid drive instead of the main drive - I'm wondering at this point if there's a problem with a folder name or permissions. WGM just doesn't seem to recognize that there's a site on my server.

OK - wikid is failing to start.
2/5/09 1:36:17 PM com.apple.wikid[37723] Removing stale pidfile /var/run/wikid.pid
2/5/09 1:36:17 PM com.apple.launchd[1] (com.apple.wikid[37723]) Exited with exit code: 1
2/5/09 1:36:17 PM com.apple.launchd[1] (com.apple.wikid) Throttling respawn: Will start in 9 seconds
From the wikid error log:
2009-02-05 13:36:17-0600 [-] Log opened.
2009-02-05 13:36:17-0600 [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2009-02-05 13:36:17-0600 [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2009-02-05 13:36:17-0600 [-] twisted.web.server.Site starting on 8086
2009-02-05 13:36:17-0600 [-] Starting factory <twisted.web.server.Site instance at 0x2eb19e0>
2009-02-05 13:36:17-0600 [-] twisted.web2.channel.http.HTTPFactory starting on 8087
2009-02-05 13:36:17-0600 [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x2eb1648>
2009-02-05 13:36:17-0600 [-] set uid/gid 94/94
2009-02-05 13:36:17-0600 [-] Traceback (most recent call last):
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/bin/twistd", line 21, in <module>
2009-02-05 13:36:17-0600 [-] run()
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 27, in run
2009-02-05 13:36:17-0600 [-] app.run(runApp, ServerOptions)
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 379, in run
2009-02-05 13:36:17-0600 [-] runApp(config)
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 23, in runApp
2009-02-05 13:36:17-0600 [-] _SomeApplicationRunner(config).run()
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 158, in run
2009-02-05 13:36:17-0600 [-] self.postApplication()
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistdunix.py", line 213, in postApplication
2009-02-05 13:36:17-0600 [-] startApplication(self.config, self.application)
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistdunix.py", line 183, in startApplication
2009-02-05 13:36:17-0600 [-] app.startApplication(application, not config['no_save'])
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 400, in startApplication
2009-02-05 13:36:17-0600 [-] service.IService(application).startService()
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/application/service.py", line 233, in startService
2009-02-05 13:36:17-0600 [-] service.startService()
2009-02-05 13:36:17-0600 [-] File "/usr/share/wikid/lib/python/apple_utilities/service.py", line 62, in startService
2009-02-05 13:36:17-0600 [-] SettingsManager.globalSettings.rebuildIndex())
2009-02-05 13:36:17-0600 [-] File "/usr/share/wikid/lib/python/apple_utilities/SearchManager.py", line 424, in buildAllIndexes
2009-02-05 13:36:17-0600 [-] buildSearchIndex(aPath, doRebuild)
2009-02-05 13:36:17-0600 [-] File "/usr/share/wikid/lib/python/apple_utilities/SearchManager.py", line 406, in buildSearchIndex
2009-02-05 13:36:17-0600 [-] GroupSqliteIndex.buildSearchIndex(whichPath, forceRebuild)
2009-02-05 13:36:17-0600 [-] File "/usr/share/wikid/lib/python/apple_utilities/GroupSqliteIndex.py", line 551, in buildSearchIndex
2009-02-05 13:36:17-0600 [-] con = sqlite.connect(indexDBPath, isolation_level=None)
2009-02-05 13:36:17-0600 [-] sqlite3.OperationalError: unable to open database file
I would like to fix this without reinstalling. If there's a way to restore this specific database file or any part of the wiki, I would prefer to do that. Does anyone have an idea what files I should check/restore?

WSDLXML error in Web services for real time job

Hi Experts,
I want to use Data Services as a web services.
I have configured a Batch job and Real time job that is available as a web service.
Web services for Batch job is no problem. but Real time job is problem
I get the following error message in the WSDLXML
<tns:documentation>Web Services published by BusinessObjects Data Services Version 12.1.0.0, using Apache Axis 1.1The following errors and warnings were found during WSDL generation. Please refer to the Data Services Administrator for detailed explanations. *** Unable to create WSDL for service: job_testconnectivity.</tns:documentation>
Version is DATA SERVICES XI (12.1.0.0)
Edited by: moon bum cho on Dec 1, 2008 3:00 PM
Edited by: moon bum cho on Dec 1, 2008 3:15 PM

check whether the Access Server for which this service is configured is running
the real-time service configuration is saved with Access Server, management console will get the information from Access Server while generating the WSDL
to check the status of access server
click on administrator -> Access Servers
click on the Access Server and click on Ping

Accessing web services for leave process

Similar Messages

Maybe you are looking for