Accessing xsd:any in the process
Folks,
I have an input element, which contains xsd:any . we have defined a schema with several elements and the request message can contain any of these elments defined in the schema. At runtime, how can identify which element was sent my consumer and access those values in BPEL Process?
Thanks/steve
I also have the same requirement .Please let me know the if anyone have done it so far.
any documentation is also of great help.
Thanks
Deepthi
Similar Messages
-
How to add wait time for any of the process in Process chains?
HI
I want to add the wait time for the process in the process chains. How to do it?
Regards
PriyaHi there,
Here you go:
REPORT ZREPORTNAME. "the name of your report
WAIT UP TO 90 SECONDS. "a wait is set to 90 seconds before starting the chain
"call your chain to be executed after that
CALL FUNCTION 'RSPC_CHAIN_START'
EXPORTING
I_CHAIN = 'ZYOURCHAIN'. "the name of the chain you wish to run
Diogo. -
HT2518 Migration Assistant set up new user to which I don't have access to any of the files!!!
I tried to transfer my PC files using Migration Assistant. It set up another user and when I try and go to that users files, it says that I don't have permission to access them. What do I do now?
I'm going to assume the consolidating files does not work due to hard drive space limitations.
Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility? That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
Also, using the Apple article on moving the library, take a slight twist on what it says. Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation. -
I was on Snow Leopard with no issues accessing my Windows and Java based hospital computer system . I swithced to Mountain Lion and now I have NO access to any of the hospital applications remotely. Is there a way I can get back to Snow Leopard or manipulate Mountain Lion to allow me to access my hospital system?
davidmarr wrote:
Is there a way I can get back to Snow Leopard or manipulate Mountain Lion to allow me to access my hospital system?
Restore the Snow Leopard bootable backup/clone or the Time Machine backup. As for making ML work, I've not a clue since I don't do windoze or access things remotely. You'll have to wait for one of those gurus to pop in or just post what's happening when you try at the ML forums. -
PartnerLink Input Variable initialization error for xsd:any datatype
I have a web service which use the xsd:any for the message type( segment of the wsdl given below):
- <message name="post_ps_apg_services0Request">
<part name="fa_form" type="**xsd:any**" />
</message>
<portType name="ps_services_wsPortType">
- <operation name="post_ps_apg_services">
<input name="post_ps_apg_services0Request" message="tns:post_ps_apg_services0Request" />
<output name="post_ps_apg_services0Response" message="tns:post_ps_apg_services0Response" />
</operation>
<binding name="ps_services_wsBinding" type="tns:ps_services_wsPortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="post_ps_apg_services">
<soap:operation soapAction="" style="rpc" />
- <input name="post_ps_apg_services0Request">
<soap:body use="literal" namespace="ps_services_ws" />
</input>
- <output name="post_ps_apg_services0Response">
<soap:body use="literal" namespace="ps_services_ws" />
</output>
</operation>
<service name="ps_services_ws">
- <port name="ps_services_wsPort" binding="tns:ps_services_wsBinding">
<soap:address location="http://spider.apollogrp.edu:4400/sst/runtime.asvc/ps_services" />
</port>
</service>
I have created a Partnerlink Invoke_ps_apg_services with Input Variable 'Invoke_ps_apg_services_post_ps_apg_services_InputVariable'.
During Compilation of the process I get the following exception:
Error: Couldn't initialize variable.
Error occurred while initializing BPEL variable "Invoke_ps_apg_services_post_ps_apg_services_InputVariable" at line 51, the schema processor could not find type "{http://www.w3.org/2001/XMLSchema}any" for part "fa_form", in the following schemas:
Schema 0 ---> namespace=http://edu.apollogrp.ws.ps_services/Ips_services_ws.xsd
location=file:/C:/BPELProjects/FAPP/FAPP_PS_Service/bpel/PostFAFormsPSSchema.xsd.__OAUX_GENXSD_.TOP.XSD
Schema 1 ---> namespace=http://xmlns.oracle.com/pcbpel/adapter/jms/
location=file:/C:/BPELProjects/FAPP/FAPP_PS_Service/bpel/jmsAdapterInboundHeader.wsdl.__OAUX_GENXSD_.TOP.XSD
Schema 2 ---> namespace=null
location=file:/C:/BPELProjects/FAPP/FAPP_PS_Service/bpel/FAPPService.wsdl.__OAUX_GENXSD_.TOP.XSD
Please make sure that the type "{http://www.w3.org/2001/XMLSchema}any" is valid in your wsdl.
Has anyone have seen this error ? What is the fix/workaround ?
Thanks in advanceThe "any" type is not defined in the standard http://www.w3.org/2001/XMLSchema namespace. Try changing the type name to "anyType" and it should not give that error anymore.
The valid types defined under that namespace are located at [http://www.w3.org/TR/xmlschema-2/#built-in-datatypes|http://www.w3.org/TR/xmlschema-2/#built-in-datatypes]. -
Error while executing the Process chain
Hi Friends,
The process chain that I scheduled is getting failed at the Infopackage loading stage.
On checking the diplay message, I found the following log:
Cannot stage requested data for datasource
Error in source system
I activated the datasource in source system, then replicated the same and tried to load data.
But the issue remains the same.
I checked in RSA7. The status corresponding to this datasource is in yellow status.
Can I delete this entry and try again?
Please suggest.
Thanks in advance.
Surjit PHi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Majority of the issues will be based on these things only..
Hope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope this helps.
pls award me some points
thanks.
Thanks -
If we rename any of the process, and run the workflow, it’s not getting reflected. It still shows the old process name. This happens in spite of deleting the old instance and restarting the server. We manually need to edit the .xpdl file for old references and save it back.
thanks,
Regards,
ArchanaI think it would be best if you specified what the real issue is, and why this presents a problem to you.
If you really need to see the entire command line of the process, you can go to the -
My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
"The process cannot access the file ..." occurs when export crystal report
We are using a web application developed in VS 2005, .NET 2.0 with the bundled Crystal Reports version 10.2.3600.0 running on a Windows 2003 Standard server with 4GB Ram and Dual CPU's. Periodically we are still receiving the following error in our production environment:
InnerException:
The process cannot access the file because it is being used by another process.
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType)
This is occuring at the point on the code where the report is being exported to a PDF. Exporting the report to Excel does not appear to cause the error.
Stream outStream = report.ExportToStream(ExportFormatType.PortableDocFormat);
byte[] charStream = new byte[outStream.Length];
outStream.Read(charStream, 0, (int)outStream.Length);
if ((charStream != null) && (charStream.Length > 0))
HttpContext.Current.Response.ContentType = "application/pdf";
HttpContext.Current.Response.OutputStream.Write(charStream, 0, charStream.Length);
HttpContext.Current.Response.End();
report.Close();
report.Dispose();
ds.Dispose();
GC.Collect();
Closing and disposing of the report and dataset (xsd) are followed by a call for garbage collection. We are unable to produce the error in our development environmennt and have not at this point been unable to pinpoint a problematic report. The development team members do have SP1 installed. The report limit has not been changed from the standard of 75 jobs. Reviewed the following document, Re: "The process cannot access the file ..." occurs when export crystal report However this applies to VS 2008. Any suggestions to resolve the issue would be greatly appreciated.
Thanks,
JoeGood morning Joe
For more details re. loading please see the following resources:
[Crystal Reports 2008 Component Engine Scalability|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412?quicklink=index&overridelayout=true]
[How Can I Optimize Scalability?|http://msdn.microsoft.com/en-us/library/ms225519.aspx]
[Choosing the Right Business Objects SDK for Your Needs|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bccdfd-88a6-2b10-1da1-c47a54b625a7]
To answer your questions:
Is it correct to presume that the physical number of CPU's is not factored into the CPL? So that a Server with 2 or more processors does not increase the 3 concurrent requests? Therefore 2 CPU's would not increase the CPL limit to 6 processes?
- Server with 2 or more processors does not increase the 3 concurrent requests.
What would be an alternate solution to this limit be, considering the report requests could increase significantly?
- Only way around this would be to web farm the solution
If only only 3 reports can be processed at the same time. If one or more of the reports currently processing is taking longer due to receiving large amounts of data, how does that affect the queue? And what is stored in the queue, data and/or the report? Is this something that could consume memory?
- The report can take as much time as it needs. The result is that one license will not be released until the report is done. There is no data stored, just a pointer to the report. However queued apps will chew up memory, some times to the point of the server becoming unresponsive
I have read in the documentation on this site, that the dataset sent to the engine is copied in memory during report construction. So if a large amount of data is requested for a report (as an example 10+ MB) Could enough users requesting reports drive the memory up because memory usage doubled due to the dataset?
- Absolutely. See [Crystal Reports Guide to ADO.NET|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/401c4455-a31d-2b10-ae96-fa57af5aec20].
Understanding the the CR DLL's are loaded on the first report request, do they get released at some point time due to inactivity or garbage collection? How much memory usage could be consumed when they load and stay resident?
- No they do not. Not as long as the application is running.
Ludek -
my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description: Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Dec 31 13:46:09 2011
Lease Expires: Tue Jan 03 13:46:09 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number: 86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me). -
Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Recurrent error in Win32 install logs (The process cannot access the file..
hi forum !
I'm already on my third installation of Hyperion Essbase and still getting the same error within the logs :
(Jan 31, 2008 1:48:29 PM), essbaseServer7_0_0Suite, com.installshield.wizard.platform.win32.WindowsSharedFiles, err, ServiceException: (error code = -30016; message = "The process cannot access the file because it is being used by another process.
(32)"; severity = 0)
STACK_TRACE: 23
ServiceException: (error code = -30016; message = "The process cannot access the file because it is being used by another process.
(32)"; severity = 0)
at com.installshield.wizard.platform.win32.Win32FileServiceImpl.win32SetFileModified(Native Method)
at com.installshield.wizard.platform.win32.Win32FileServiceImpl.setFileModified(Win32FileServiceImpl.java:115)
at sun.reflect.GeneratedMethodAccessor272.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
at com.installshield.wizard.service.file.GenericFileService.setFileModified(GenericFileService.java:185)
at com.installshield.product.actions.Files.setFileTimes(Files.java:1608)
at com.installshield.product.actions.Files.install(Files.java:460)
at com.installshield.wizard.platform.win32.WindowsSharedFiles.install(WindowsSharedFiles.java:87)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
at java.lang.Thread.run(Unknown Source)
can use the products but this shouldn't be fine... do I have to stop a service or grant some permission ? any help is appreciated.
thanks & regards,not having any JAVA_HOME env var. Did some checkings and :
- one machine was having Java libraries because of DB2
- the other machine was a fresh Win2003SP1 with SQL Server 2005
guess can set JAVA_HOME to C:\Hyperion\common\JRE\Sun\1.5.0 before installing Essbase, but also guess it's a documented/automatic step... wonder what I'm missing ?
doing the most basic-mode installations (defaults, automatic deployments), once I get them clean will perform more sophisticated ones. Searched the 9.3.1 doc PDFs without useful findings. -
I am trying to move a file from a folder to another folder.
here is my code:
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Test Pictures");
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Test Test";
File.Move(folderContentNames[1], destinationFile);
updateListBoxFileName();
updateImageBox();
each time I hit the bolded underlined part I get that error message.
if you need anything else just ask.
Thanks in advance,
Thor OrbHi Thor,
If you want to move a file from a folder to another folder, I think you could get the sourcePath and TargetPath. The code below shows a simple demo:
string[] folders = Directory.GetFiles(@"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test");
string desFile =Path.Combine( @"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test - Copy\"+Path.GetFileName(folders[1]));
File.Move(folders[1], desFile);
In addition, the link below might be useful to you:
# How to: Copy, Delete, and Move Files and Folders (C# Programming Guide)
>> The process cannot access the file because it is being used by another process
The message seemed that the file was opened in other process. Did you operate the file with other code?
I think you could check if the files and the folders were opened, and review your codes if they were used in other places.
If you have any further questions, please feel free to post in this forum.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.
Ya, Thanks I figured about the path and destation. yes I am using the file in another area, the file is an image jpg and I am displaying it in a picture box. Now I have been doing a little research I see a command called Dispose() and this is suppose to
release the handle on the image, but I can seem to figure out have to use it correctly.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Collections;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.IO;
namespace Scanned_Picture_Ogranizer
public partial class Form1 : Form
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Scan Project Testing\Test Pictures", "*.jpg");
//List<string> folderContentList = folderContentNames.ToList();
private List<string> folderContentList = new List<string>();
Bitmap currentImage;
Bitmap placeHolder;
public Form1()
InitializeComponent();
convertingArrayToList();
startUpData();
string sourceFile = @"C:\Users\Jonah\OneDrive\My Programming Projects\Scanned Picture Organizer Project\Test Pictures";
string destinationFile = "";
private void moveButton_Click(object sender, EventArgs e)
private void startUpData()
//placeHolder = new Bitmap(folderContentList[0]);
//currentImage = (Bitmap)placeHolder.Clone();
// Image loadImage = new Bitmap(pictureClones[0]);
// currentFilePictureBox.Image = loadImage;
int numberOfFilesLeft = folderContentNames.Length;
foreach (string name in folderContentNames)
fileNamesListBox.Items.Add(name);
fileNameTextBox.Text = folderContentNames[0];
numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
///loadImage.Dispose();
//FileStream currentImage = new FileStream(folderContentList[0], FileMode.Open, FileAccess.Read, FileShare.ReadWrite);
private void convertingArrayToList()
foreach (string listName in folderContentNames)
folderContentList.Add(listName);
private void selectingImageFromListBox()
private void updateImageBox()
Bitmap currentImage = new Bitmap(folderContentList[0]);
currentFilePictureBox.Image = currentImage;
currentImage.Dispose();
private void updateListBoxFileName()
fileNamesListBox.Items.RemoveAt(0);
fileNameTextBox.Text = folderContentList[0];
// numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Scan Project Testing\Test Test\";
File.Move(folderContentList[0], destinationFile + System.IO.Path.GetFileName(folderContentList[0]));
folderContentList.RemoveAt(0);
updateImageBox();
updateListBoxFileName();
when I first start the program the first picture displays, but when I trigger historyPictureBox_Click(), it does that error again. Another things is that I already looked at that link and it didn't help.
I just super confused, I would like your help on this.
Thanks,
Thor Orb -
I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..MichaelI am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '2011-03-25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure -
Move-item: The process cannot access the file because it is being used by another process.
Hey,
I have a powershell script where I first use Get-childitem to receive a number of files.
Then I do some stuff with it and try to move the file afterwards.
Unfortunately if I am using a lot of files I receive very often the error:
The process cannot access the file because it is being used by another process.
Even -Force parameter does not help further.
Based on my look around it is not used by another process.
I think it is still 'in use' by powershell from script commands previously.
Is there any way to 'see' if the file is still in use currently and wait for this to end?
Or can I 'close' the current usage of the file?
Thank you :)Hey,
Thank you.
I build the following function.
But either the $return = $true I receive "The process cannot access the file because it is being used by another process." when I try to move-item... :(
Function Wait-FileUnlock($FilePath){
Write-Host " "
$FileInfo = New-Object System.IO.FileInfo $($FilePath)
DO{
try{
$fileStream = $fileInfo.Open([System.IO.FileMode]::Open, [System.IO.FileAccess]::Read, [System.IO.FileShare]::Read)
$return = $true
catch{
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
$return = $false
While($return -ne $true)
$Error
return $return
Another functions is:
Function Wait-FileUnlock($FilePath){
Write-Host " "
DO{
$Error.Clear()
Rename-Item $FilePath $FilePath -ErrorAction SilentlyContinue | Out-Null
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
While($Error.Count -ne 0)
This one waits .. but it seems not to end waiting at any time :(
Maybe you are looking for
-
how can i sync my iPod with new iTunes on new computer without losing my old library? There is no backup iTunes/iPod files available.
-
Reson for creation of Planned & Production Order ?
Hi, I m having 1 material in Project(PS) with req qty as 4 and Production order is there with delivered n released status for the same. but when i m running COOIS its showing two Production order for the same. 1. Wth 4 quantity with delivered status
-
Value of Textfield on Masterpage is not rendered!
Hi all, I design a new form using HRFORMS. When I put a simple textfield on a master page and give the textfield a default value and render my form using transaction PC00_M01_CALC_SIMU, the value of the textfield is NOT rendered. I am using Adobe Liv
-
Tried to install Lion on my snow leopard and got an error. Lion was not installed.
Should I try to install it again? Message was edited by: janicefromiselin
-
Help: successfully upgraded to 10.5, logged in and a kernel panic repeats
After successful upgrade to Leopard on my new iMac, I upgraded the iBook today. Successfully, I followed the prompts from Tiger 10.4.11, took about 1hr 10min. My iBook rebooted and then after about 20 rounds of spinning sticks, the login screen appea