Accessing Xserve with Lion Server from Windows 7 PC via VNC Viewer

Hello everyone-
At work we have an Xserve running Lion Server that we are trying to access from a Windows PC runnig Windows 7. We have turned on Screen Sharing on the Xserve and we are using RealVNC's VNC Viewer client to access the Xserve.
Everything works OK except the Control key is not being passed through to the Xserve, so you can't to teh usual copy/paste commands etc.
I have checked on the Web but found nothing to resolve this problem. The settings in the RealVNC client are set to pass through special keys, but it is as if the VNC server on the Xserve isn't seeing them.
Does anyone have any ideas?
-Mike

Hi Michael,
Thank you for clarifying the issue for us.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Regards
Kevin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.

Similar Messages

Ok, taking the leap. Tossing out all Windows servers and going with Lion Server only!

Help! We are retiring our Windows 2000 server (finally) and going with Lion Server only. We are transitioning from Windows to Mac and have 30 PC's running XP and a few scattered Windows 7 PC's (Lab). We have teachers and staff using Mac computers. Can I authenticate my windows pc's to Lion server?

1. We are running lion on the old Xservs because we had them. Thought they still would be good file servers. And we thought Lion would work on them but know that mountain lion will not
2. We have looked up some errors and they have to do with spotlight not getting index finnished with all the adobe files in folders, subfolders and subsubfolders. The vnode errors have something to do with lots ofmopen files but we do not know why. Maybe all these many directiries of files in deep hierarchy of adobe CS which the department does shared work directly on the server is issue. We have tried to get them tomuse as archive only but they do not habe a clue how to do shared work on separate clients. This deparment is not very savy in use but imtense Adobe CS users and my concern is these old file servers cannot take this kind of use.?
Imposted the logs because i have no clue to why they keep filling up (the vnodes).

How to access a file in Unix server from windows using java

I want to access a file in unix server from windows using java program.
I have the following code. I am able to open the url in a web browser.
String urlStr="ftp:user:passwd@unix-server:ftp-port//javatest/test.csv;type=i";
URL url = new URL(urlStr);
BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream)));
String inputLine;
while((inputLine=in.readLine()))!=null){
System.out.println(inputLine);
in.close();
I get the following error
java.io.FileNotFoundException: /javatest/test.csv
at sun.net.www.protocol.ftp.FtpURLConnection.getInputStream(FtpURLConnection.java:333)
at java.net.URL.openStream(URL.java:960)
at com.test.samples.Test.main(Test.java:45)

urlStr="ftp:user:passwd@unix-server:ftp-port//javatest/test.csv;type=i";
I have given the format of the urlStr that I am using in the code. The actiual values are used in my code. I have tried pasting this url in the browser and it opens the file.

Creating a simpel network with Lion Server, and add Windows XP computers to it

We have a Mac Lion Server and 3 computers with Windows XP. Previously we had a Windows 2003 server with a domain name: "MYDOMAIN". When logging into Windows it logs into this domain.
I would like to replace this Windows 2003 server with my new Mac Lion server so, I build up a test setup. I connected the Mac Lion server (iMac) with my Windows XP pc with an ethernet cable. Then, I setup a DHCP, DNS and Open directory in the Server Admin. Added users. I configured the IP adres of the server to a static one by setting the IPv4 to "using DHCP with manual address".
Then I wanted to let my Windows XP server join the domain of the Lion Server, however I cannot let my Windows XP client connect to the domain of the Lion Server.
I read in the advanced administration that you can set up Windows XP for domain login. Where do I find the name of this domain? It should be stated in the server admin, open directory, settings, general tab, but the only thing I find here is: Role: Open Directory Master.
In Windows XP, when I explore in explorer the Microsoft-Windows Network I can see in "MYDOMAIN" the MacLion Server and my Windows XP pc. So sharing files is no problem.
However, I really want to create a new domain with my Lion Server and let the Windows XP pc's login to the new domain.
I hope anyone can help me.

Thanks for the info.
I read some stuff about this indeed, so I was thinking, because we have a small network, could it be possible to share files on the server via a workgroup?
If we add the 3 Windows XP pc's to the same workgroup as the Lion Server, would there be a problem?
Then at startup of Windows XP, should we login to the pc instead of the domain? And where would I find the Lion server in Windows XP?

Why cant i open solidworks files on my lion server from a pc

Hello
I'm usuing a new mac mini with lion server as a file sharing server (smb) with multiple machines with both W7 and XP. My problem is accessing SolidWorks files from the PC. I can drag the files to the desktop and then they will open but if I try to open them from SolidWorks it doesn't work. It looks like other are having this problem with SolidWorks and office. It also looks like in the last update (10.7.3) they might have fixed the issues with office but I can't find anything about SolidWorks issues being solved. I didn't have this problem before when I was using an older mini server with snow leopard but ever since I have made the switch to a new machine with lion server I've had this problem.
I'd appreciate some help please...or where I should dig deeper.
Thanks for the help.

Notes
SolidWorks Product Support Lifecycle
Windows Home Editions are not supported
Apple Macintosh®-based machines running Windows using Boot Camp are not supported
Office 2010 feature 'Click-To-Run' is not supported
I found this on the official Solidworks site

How to use webmail address book on Mac Mini Server with Lion Server.

I have a Mac Mini Server with Lion Server installed; the webmail is setup and working but I can not get the address book to work.
I have followed an instruction from this website on how to activate the address book icon in webmail but can not add any addresses. Is there something that needs to be activatied before it will work?

No, I didn't solve the problem. The monitor still goes to sleep with WIndows but not with my Mac Mini. About 8 months ago I basically wore out the power switch on my monitor so I bought a wireless power switch to shut it off at the outlet. The VX2835wm monitor itself is now starting to fail as well-- a couple of times it's gone through a weird sequence of flashing screen colors on power up and ended up in an overscan mode (that took me for ever to figure out how to fix). I have decided to replace my VX2835wm with a Dell u2412m once it fails for good partly because I really want to keep the 16:10 resolution (very hard to find these days) and partly because I want to see if a different make of monitor will go to sleep properly based upon my Mac Mini power down settings.

Snow Leopard Server with Lion Server for APNS

Hello Everyone,
I'm wanting to keep my Snow Leopard Server (Xserve) setup in place its working great, and cant afford to have any down time on the company network. What I would like to do is setup up an additional Mac Mini with Lion server to handel just the APNS. Is this possiable.
I would be running all of the services, mail, OD, addressbook, caladar, on the Snow leopard server but want to use Lion Server to push out and manage some Lion clients, and iPhone with a second server has anyone done this, can this setup work?
Thanks!
Robert

Hi Robert
"Can you provide the basics for setup?"
Apart from making sure DNS is configured correctly - as always - there's not much else you need to know. Server has to be configured as an OD Master. It does work with the default self-signed certificate although Apple do recommend you purchase one from a CA such as Verisign. I mention Verisign because it's trusted by the US Government. Once you've got your push notification certificate from Apple, enable the relevant option in the Server App. From there create the enrolment profile and key in the relevant url in your IOS device. The rest is fairly obvious. If DNS is not properly configured for your network this part probably will fail.
"Can this all be completed in server admin, or the new server.app?"
AFAIK Server Admin is not involved with APNS.
"Did you just bind Lion Server too Snow Leopard Server, connect to another OD, or replica?"
This was on a publicly accessible server that was its own OD Master. Provided things are configured correctly I can't see why it can't work with an environment that's behind NAT.
"What do I setup after this?"
Apart from making sure DNS is configured properly as well as the tip regarding trusted certificates I can't think of anything else? From what I've seen MDM in Lion Server is very good and what's more quick on the devices I tested. I only tested IOS devices and testing was done 'over the air.' You can still use the ICPU assuming you kept a copy of the download?
HTH?
Tony

How do I set up my Time Machine and Mac Mini with Lion Server so i have one wifi loop in the house?

HELP!
So I have had a Time Machine wifi loop at the house for approx. 6 years. I run two Macbooks, 2 iPhones, 2 iTouch and a Samsung Smart Blueray on the loop.
I just bought a Mac Mini with Lion Server. When setting it up I'm not sure what or how I managed to do, but I now have 2 wifi loops, one doesn't lock and niether will support the Samsung BlueRay. Also, each time I want to go online with one of the other Mac devices i have to relog into the wifi loop.
Can someone please walk me through the fix. The mac Mini is plugged straight into the Time Machine to recevie its internet connection.
Thanks!
John

You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
(Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
Then set DHCP for clients that will join.. this can then expand the scope of addresses..
It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

How do I get Mac Pro with Lion Server to restart at a set time when users are connected?

I have recently configured a Mac Pro with Lion Server, and have set it to restart automatically every morning at 3am. When I arrive in the morning, I notice that it has not rebooted, usually because it states there are users connected. Is there a way to automatically disconnect users so that the machine will reboot. No one is ACTIVELY connected at this time of the morning, but may still be logged in somewhere. I did see where I can log out users after a set period of time when using Workgroup Manager to manage a computer or computer group, but I don't use the server to manage all of the computers that have users log in.
Thanks!

Well, it doesn't necessarily have to be each and every night, but it was for the sole purpose of preventing sluggishness. We had it set up before, as Snow Leopard Server and it would restart every night. It would occasionally be slow and need rebooting, however a manual reboot was not possible by most people in the store as they did not have credentials to screen share and restart it - which would result in holding down the power button to shut it down.
The server is used for the sole purpose of logging in about 50 users just so they can customize their experience, as well as saving items to their own home folders. The store is closed during the night, and there is no reason anyone would be accessing it during the night.

Address book Sync with Lion Server

Hello,
I have set up a Mac Mini with Lion Server and have OD users (no local user on the server). When I login "locally" (using the OD user account), I have my full environment, everything seems to work ok. Also the sync from my iPhone seems to work (only some calendar errors, sync doesn't come up with address book errors). But, as I now have noted, there is not really a sync of the address book. I have an old version of my address book on the server.
How do I properly set up that:
- my iPhone syncs with my OD user's address book only
whereas
- central address book is kept on the OD server as well (without any sync)?
Or did I get something wrong regarding the concept of running an address book on the Lion server ... maybe it's not possible to sync the iPhone to an OD user's address book?
Best regards,
Olaf.

Have you tried rebuilding the accounts in SystemPrefs>Mail, Contacts and Calendars?
Are the machines bound to the directory?
Try setting it up in a fresh account on the broken Mac.
Try setting it up on a different Mac.
Hope this helps,
Brian

How to access Time Capsule 2013 disk from Windows 7

I have seen several (older) threads that suggest that you can access the Time Capsule disk from Windows 7 using Windows Explorer and navigating to \\Time-Capsule-Name. However, I have tried this repeatedly and just cannot get it to work.
Could this be a bug or unsupported in the latest 2013 Time Capsule?
In Airport Utility, under Disks > File Sharing, I have Enable File Sharing checked. The workgroup is WORKGROUP.
The IP address is 192.168.1.4. I am able to ping it successfully; I just cannot access it through Windows Explorer.
Am I missing something? Please help!

Are you running homegroup on the PC..??
That should definitely be turned off!!
Homegroup can mess things up.
I would try with ipv6 off but that might make no difference at all.. leave it set to local-link if it doesn't do anything.
There was issues when the Gen4 came out with security. Windows uses too high an encryption level..
See info here.
http://www.dummies.com/how-to/content/changing-file-encryption-settings-on-a-win dows-7-h.pageCd-storyboard,pageNum-5.html
Change to 40 or 56 bit encyrption.
Unfortunately some of the controls you think you are setting on the TC are not really being set at all.. eg I doubt you are actually changing the workgroup.. if possible though you should have disk access set to lowest level .. device password and you should also turn on guest account to read and write.. that usually solved access for me in earlier TC .. I haven't bought an AC for the moment.. because.. well I believe I have done my time on the war front. I bled out already on the bleeding edge.. time for you to do it and I can reap the benefits on the second hardware revision and about the 10th firmware update.
Other things I would try if the above don't work.
Factory reset and start over.. you moved the IP of the TC and that is unwise.
Do not worry about the various settings.. do the factory reset.. in full isolation from the internet. ie TC plugged into the windows computer. Nothing else in either..
Now try at the default IP of the TC..
\\10.0.1.1
Beyond that you need another computer to try or some device. iOS would be fine... in normal situation you would test other protocols, eg ftp but TC offers only SMB and AFP.. there are no AFP clients for windows that I have heard of.. you might have success if you boot the PC from a linux live cd.. it should be able to read AFP even if it cannot write to it. But the SMB is more important. If linux can access with SMB protocol and windows cannot.. the issue is windws OS.
Or iOS devices have some AFP file browsers available but again just test with SMB.. most file browsers for iOS use SMB.. if other devices can manage SMB protocol to open files on the TC then the finger points very clearly to the PC as the trouble.. on the other hand if nothing can access SMB then the TC is faulty and should be replaced.

Lion server in windows network

what are the steps if possible, to migrate a Windows Server 2003 network, into a mac mini with lion server, and terabytes of data storage connected?

Too vague of a question. What does your server 2003 network do that needs to be migrated? Just a file server or more than that?

Problem with lion server - profile, wiki , postgresql

I have problem with lion server:
- Profile Manager Error Reading Setting
- Wiki Error Reading Setting
org.postgresql.postgres[3163]: postgres_real cannot access the server configuration file "/var/pgsql/postgresql.conf": No such file or directory

I have problem with lion server:
- Profile Manager Error Reading Setting
- Wiki Error Reading Setting
org.postgresql.postgres[3163]: postgres_real cannot access the server configuration file "/var/pgsql/postgresql.conf": No such file or directory

Is SSL and multiple websites possible with Lion Server?

this is the obligatory apology from a nub here....
I have not been a sys admin since the days of NT 4.0.
I like to think that "hey, i might need a touch up here and there, but I think I can find my way around..." Wrong.
I have been searching, and reading and searching and reading, and trying everything I can think of.. and I CAN NOT figure out how to get mutliple websites working with Lion Server, using self signed certs 1 for each of my subdomains.
Has anyone, anywhere (thank you google for returning searches to me from 2004?!?! More puzzled confusion....) posted a step by step guide yet???
I have a mac mini, and I have two domain names that are resolving to my exterinal interface on my router just fine, and I have tried what I thought was
every different possible combination of voodoo, magic, 00000...MoreTestingNeeded.conf, and all the other tricks.
Is it possible to get ssl and multiple websites working with one IP address?
Thanks...

Thank you very much for your time and input. My birthday was fantastic! Thanks for asking.
I found out about SNI while researching an error I was getting in the log. I really never found any definitive "this is what you need to do", so I was going to get back to it later.
You probably know this, but Lion Server breaks out all of the virtual hosts into seperate documents in the "sites" directory. All I do is I launch the server.app, and in the web component, I enter the name of the website that I want to resolve to my server, and I give it the path to the docs. Thats it. There is no DNS configuration to speak of, on my part, and I don't believe that its necessary (?) to touch the httpd.conf file at this point yet either, even though I think I hear others saying you do. (I have no issues with getting into the file and making any changes, I just thought it was interesting.)
I am still trying to figure out how a user is supposed to add any other types of services LIKE ftp, etc. I know and use the server admin tools, but I have found that the app really does do its job in terms of creating all the dns records for resolving the sites you create. I sure hope its not just using the host file, is it? I never see any additional files in the DNS manager, for any of the subdomains. Where are they?
Here is the contents of what appears to be the first file read, that is for SSL enabled sites:
``````````````````````````````````````````````````````````````````
This is "0000_any_443.conf:"
`````````````````````````````````````````````````````````````````
## Default Virtual Host Configuration
NameVIrtualHost *:443
<VirtualHost *:443>
ServerAdmin [email protected]
DocumentRoot "/path/to/the/docs"
DirectoryIndex index.html index.php /wiki/ default.html
CustomLog "//log" cmbndvhst
ErrorLog "/"
<IfModule mod_ssl.c>
SSLEngine On
SSLCipherSuite "SOMEGARBAGEIDONTKNOWIFISHOULDSHAREORWHAT"
SSLProtocol -ALL +SSLv3 +TLSv1
SSLProxyEngine On
SSLCertificateFile "/sslcerts/certs/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXXX.cert.pem"
SSLCertificateKeyFile "/sslcerts/certs/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXX.key.pem"
SSLCertificateChainFile "/path/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.chain.pem"
SSLProxyProtocol -ALL +SSLv3 +TLSv1
</IfModule>
<Directory "/Path/To/The/Docs/XXXX/SDFSDD">
Options All +MultiViews -ExecCGI -Indexes
AllowOverride None
<IfModule mod_dav.c>
DAV Off
</IfModule>
</Directory>
Include /httpd_passwordreset_required.conf
</VirtualHost>
```````````````````````````````````````````````````````````````````````````````` `````````````
So.. my questions are:
Where in the .confs do I add what I need from your above items? Would it go each of the site docs that I need? I am really not sure what apple is doing here.
I have 4 domain names resolving to my server right now, and subdomains to each of the domains. So there are a total of about 10 "site" docs, not a big deal to change each, I just wonder if Lion overwrites these docs with each refresh or what? Also, If I try to add a third .com right now it breaks the whole site.
(Out of conversation, but I just remembered this. I just had to "quit" out of the server.app.) When installing the directory server, it hangs on "getting certificates". The spinning wheel (not the rainbow collered one, but the black one by the words "Getting Certificates") just sits there and spins. I finally just hit the red X and relaunch server.
Lastly, you meniton importing the key. I am using the key manager within the server app. I am not sure where and how I would make the cert and key you are referring to for the importing? I have tried to use the key manager in the OS, but I am not sure of the relationship between that key manager app, and the key manager within the server.app. I have tried to create certs in the keymanager in the OS side, but I do not know how to get them to show up for use in the keymanager in the server.app.
BTW: Thanks. Thanks for the help. I really appreciate it.

I need helping!!! configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.

I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
I need to allow the following IP addresses to have RDP access to my server:
66.237.238.193-66.237.238.222
69.195.249.177-69.195.249.190
69.65.80.240-69.65.80.249
My external WAN server info is - 99.89.69.333
The internal IP address of my server is - 192.168.6.2
The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
THE FOLLOWING IS MY CONFIGURATION FILE
Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
Also the bolded lines are the modifications I made but that arent working.
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.233 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group network EMRMC
network-object 10.1.2.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 172.16.0.0 255.255.0.0
network-object 192.168.9.0 255.255.255.0
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service GMED tcp
description GMED
port-object eq 3390
object-group service MarsAccess tcp
description MarsAccess
port-object range pcanywhere-data 5632
object-group service MarsFTP tcp
description MarsFTP
port-object range ftp-data ftp
object-group service MarsSupportAppls tcp
description MarsSupportAppls
port-object eq 1972
object-group service MarsUpdatePort tcp
description MarsUpdatePort
port-object eq 7835
object-group service NM1503 tcp
description NM1503
port-object eq 1503
object-group service NM1720 tcp
description NM1720
port-object eq h323
object-group service NM1731 tcp
description NM1731
port-object eq 1731
object-group service NM389 tcp
description NM389
port-object eq ldap
object-group service NM522 tcp
description NM522
port-object eq 522
object-group service SSL tcp
description SSL
port-object eq https
object-group service rdp tcp
port-object eq 3389
access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp any interface outside eq 3389
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.6.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 68.156.148.5
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
tunnel-group 68.156.148.5 type ipsec-l2l
tunnel-group 68.156.148.5 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
: end
ciscoasa(config-network)#

Unclear what did not work. In your original post you include said some commands were added but don't work:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
and later you state you add another command that gets an error:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface. Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive? Static PAT usually makes sense when you need to change the TCP port number. In your example, you are not changing the TCP port 3389.

Accessing Xserve with Lion Server from Windows 7 PC via VNC Viewer

Similar Messages

Maybe you are looking for