Accesskeys for buttons work inconsistently - why?

When using accesskey attributes for buttons, they work sometimes and not others. Three behaviors are observed:
- using the accesskey both shifts focus and clicks button (correct behavior)
- using the accesskey shifts focus only - not clicking button
- using the accesskey does nothing
These behaviors occur without changing setup, restarting, etc.
What could cause this?
By the way, 3.6.28 works fine with the exact same web application.

Yes, we configure Firefox to use just Alt+key, which works fine for us. Configuring it to use Alt+Shift+key does not change the behavior we're seeing.
At any point in time we might have several different data entry panels configured with the same set of Alt+keys, but only one is visible at a time. I'm wondering if the "hidden" panels are a problem now, but weren't in the older version?

Similar Messages

  • Why doesn't the "back" button work all the time in Safari?

    Why doesn't the "back" button work all the time in Safari?

    thanks for the reply. You prompted me to check and I realised it wasn't installed on my test laptop and opening in Microsoft Reader. I've installed it now and it works.
    My next challenge is to prevent the mailto: command opening Microsoft Mail instead of Outlook, but I guess every user will have a different default.
    Thank you

  • I upgraded for Firefox 4 and now my simplePass identity protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE.

    I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?

    I asked this same question, and just received a response:
    "Thank you for contacting DigitalPersona. There will be no update releases
    for DigitalPersona Personal in the future. There will be no updates for
    Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
    not work with DPPersonal, then you will have to decide to either keep
    DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
    is leaving the consumer market and is focusing on business applications.
    In fact, DigitalPersona Personal will not longer be supported after
    Mid-April of this year.
    We apologize for any inconvenience this might cause. Sincerely, Tech Team "
    In other words, there will be NO update.

  • Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

    Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

    Bose Product Support

  • On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed?

    On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...

    The "Photos" view has been replaced by the Media Browser.
    Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
    For example, in the File > Open dialogue in Preview I am seeing this in the sidebar.

  • Why doesn't my back button work?

    When I use Firefox, my "back" and "forward" buttons are faded out and inoperable. What do I do to fix this?

    Not saving History (Tools -> options -> Privacy), make sure you are not clearing in "Settings for Clearing History"
    * http://img232.imageshack.us/img232/4928/clearcachew.png
    Check the above out, if that is okay then ...
    Take a picture of your toolbars for later reference, then following directions for
    * '''Corrupt localstore.rdf''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Corrupt_localstore.rdf
    For help working with your '''bookmarks and history''' see
    * '''Bookmarks''' -- http://kb.mozillazine.org/Bookmarks
    * '''Sorting and rearranging bookmarks''' <br>http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    * '''Viewing the browsing history''' <br>http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefoxfox

  • Why do I keep getting error message from Digital Editions when trying to open it. Keeps telling me that it has encountered a problem and needs to close. I need this apparently to download a text book fro Proquest - need the text book for Uni work what giv

    Why do I keep getting an error message from Digital Editions saying that it has encountered a problem and needs to close. I need this programme to download a text book from Proquest for University work what gives????

    You are using ADE on Windows or Mac ? and their versions ??
    Please restart your machine and try once again.
    Thanks

  • HT2499 I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?

    I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?

    I cannot recall the DVD player ever being a place to "store" videos - it is simply an app to play videos.
    If your machine is new, then iMovie should be included as the "shrunk" version of iLife is included with Lion (iMovie, Garageband, and iPhoto). However, iMovie is not a place to store videos either - it is a video editor. You import your clips and edit them in order to then burn to a DVD or share via a social media site.
    Have you considered simply dragging the clips to your folder "Movies"? That would be a great place to just store them (please be aware that videos are usually large files, so keep your hard drive space in mind so you keep a minimum free and available for the OS to operate properly):

  • A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  WHen we plugged it into the port on the keyboard, the device works. Why?

    A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  When we plugged it into the port on the keyboard, the device works. Why?  Obviously the device is operational.  Could the USB port have burned out from having too much power drawn?  If so, is it reparable?

    It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
    That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

  • PDF Documents with Functional Buttons - Works for IE and FireFox but not for Chrome and Safari

    To all,
    Good morning.  Our institution developed a PDF document with functional buttons for printing and e-mailing.  When the document is viewed via Internet Explorer and Firefox, the functional buttons work as expected.  However if the document is viewed via Chrome and Safari, the functional buttons do not work.  The workaround for those who are using Chrome and Safari, the PDF document needs to be saved to their local drive before the functional buttons work.
    Has anyone experienced this issue before?  If yes, what was your solution other than the workaround.
    Thanks.
    Babylon5

    Here's how to configure your browser to run Adobe Reader: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

  • Nokia x3 help! menu button works for lock but not ...

    i have a new nokia x3, around 2 months old, after restarting the phone one time, the main button (the menu button) works for locking/unlocking and even makes the keytone sound when you press it, but i cant open up the menu, its really annoying because without the menu i cannot access the phone!
    i can still make calls/text messages, but i really want to fix this.
    thanks in advance

    just to clarify, the menu button works such as when i slide the phone closed, the 'lock' option appears, and the button works then, but when i unlock, i goes back to the usual 'menu' option which just doesnt work.
    i can use text/calls from the shortcut buttons such as left/down/right and some buttons work on in certain places, such as when the 'send' option appears for sending a text.
    i have tried to soft reset  using the code, before, and i have tried restarting it.
    none of them worked, does anyone have a solution, also does anyone know the hard reset code?
    thanks in advance.

  • How does the copy button work in safari for ipad (copy button under facebbok share button)?

    How does the copy button work in safari for ipad (copy button under facebbok share button)?

    On a website ...  
    Tap the Action icon bottom of that window. (white square with a right facing arrow) then tap Facebook.
    You should see the following depending on the what content the website can share.
    Copy / Mail / Message / Twitter / Print  / Bookmark

  • Middle mosue button don't open a link on a new tab, the button works for scrolling etc.

    Middle mosue button don't open a link on a new tab, the button works for scrolling etc. Thats teh problem, seem like I'm the only with the problem...

    I had the same problem. If you're running Greasemonkey, you need to update it. There's a conflict between Greasemonkey 0.9.10 and Tab Mix Plus on Firefox 6.0.2. Until the add-ons site approves Greasemonkey 0.9.11, you'll have to install it manually.
    [https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/0.9.11 Greasemonkey 0.9.11]
    [http://turbulentsky.com/middle-clickcmdclick-on-a-link-doesnt-open-tabs-in-firefox-6-0-2.html Middle-click/Cmd+click on a Link Doesn’t Open Tabs in Firefox 6.0.2]

  • I couldn't get my maps to work while out today which I needed for directions anyone know why ? It kept saying no server .

    I couldn't get my maps to work while out today which I needed for directions anyone know why ? It kept saying no server , is it to do with my settings, my network provider, 3G or what ? Anyone help please.
    Thanks

    Yes it is about 40 mg - I didn't know there was a size limit? How can I change that?

  • For Macbook Pro Mid2010: Why not build a WiFi based AirDrop solution between iOS8 and Yosemite? Really sad it does not work.

    For Macbook Pro Mid2010: Why not build a WiFi based AirDrop solution between iOS8 and Yosemite? Really sad it does not work.

    Your Mac is too old
    To Airdrop between a Mac an iOS device
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
    To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
    From:
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

Maybe you are looking for

  • Itunes won't open - referenced memory error

    I too cannot get itunes to open. Keep getting an error message regarding referenced memory that cannot be read. The instruction is different each time - first it was 0x0b011200 then 0xf80114ed then 0x97011534 - then is has the click ok to terminate o

  • Palm m130 trying to get to work on Windows 7 64 bit operating system

    I purchased a Palm m130 on Ebay.  It did not come with a driver.  The connection is a 9 pin serial.  Web info says it comes with a usb but, this one did not.  It seems to be in perfect working order. All I want to do is to put one e-book on it. I kno

  • Adobe will not install on my mac

    so much confusion around adobe use and this Mac. Very frustrated! Have tried several different installs, uninstalls, deleting widgets, checking that plug ins allowed, restarts... I don't have time to mess around with this. Need the answer. Thanks

  • Editing HTML to create image rollovers

    Greetings, I think I've read everything in the forum archives about this, and have received helpful fragments of responses, but am still not able to get image rollovers to work in iWeb. 1) I've created the actual rollovers in ImageReady, which genera

  • After Effects export as Premiere Pro project weird PAL/NTSC problem

    This post is not a question. It's here, because I've found a solution and want to share with You. I've noticed a strange problem during export from AE to PR. Ok, here I go. AE = After Effects CS3 PR = Premiere Pro CS3 My AE project is D1/DV PAL Wides