Accessorie NYKO Charge Base Xbox 360 question about the batteries

I am sorry, I couldn't find the right forum for game accessories. I recently bought nyko Charge Base for the xbox 360 from best buy, when I got home I open the package then charged the nyko battery using nyko Charge Base, because the battery showed 3 bars that is why I was charging it. While the charger showed a green light, I went ahead and clicked the guide button that showed 4 bars.. I was playing one of my games, I notice that their was only 3 bars left while it was fully charged this is the same day I charged the battery then used it while on the guide button showed a circle ring from acting like their was 2 bars left. From sunday morning the 13th I had 3 bars left, the afternoon I only had 2 bars left from using the microsoft xbox 360 controller. For some reason the batterie act as it was dead shut off 3 times like a hour or so, while the green circle from the guide button was active.. Sunday night using the same controller same batterie showed 1 bar left . On monday morning the 14th using the same controller same batterie, I just left the controller on just to see what would happen, while the controller turn off I did press the guide button again just to see if the controller would turn on um it was out of juice. So I was charging the battery again, clicked the guide button, saw 3 bars on the screen, I clicked the guide button once again then showed 4 bars then 2 after.. I understand this wasn't a question, but it hasn't been 24 hours.. Mostly everyday I have seen the green circle while it showed up 3 bars. Did anyone had a similar problem like I had? While the battery was fully charge from monday at 3pm, I started to use it around 4pm and kept on playing a game till I stopped at 4 in the morning tuesday. Now it shows 3 bars while a green circle. From this nyko charger I had to charge the batterie almost every two days. What I don't get or understand, while I had a microsoft battery with kit and charge, I sometimes would charge the battery, meaning I don't have to use a charge for 2 or maybe 3 weeks. I would have 4 bars for 3 days at least then 3 bars for another 3 days but while it was 3 bars, it never once showed the green circle also never once shut off my controller to. From the microsoft kit and charge, from my playing habit like a day I would have to charge the batterie a day and need to charge it again maybe 2 weeks after.. From the nyko charger, I was charging the batterie every 2 or 1 day because it would go too 1 bar

I really hope no one gets mad, I wish i could edit it.. Nex time I will click preview.
I am sorry, I couldn't find the right forum for game accessories.
I recently bought nyko Charge Base for the xbox 360 from best buy, when I got home I open the package then charged the nyko battery using nyko Charge Base, because the battery showed 3 bars that is why I was charging it. While the charger showed a green light, I went ahead and clicked the guide button that showed 4 bars..
I was playing one of my games, I notice that their was only 3 bars left while it was fully charged this is the same day I charged the battery then used it while on the guide button showed a circle ring from acting like their was 2 bars left. From sunday morning the 13th I had 3 bars left, the afternoon I only had 2 bars left from using the microsoft xbox 360 controller. For some reason the batterie act as it was dead shut off 3 times like a hour or so, while the green circle from the guide button was active.. Sunday night using the same controller same batterie showed 1 bar left . On monday morning the 14th using the same controller same batterie, I just left the controller on just to see what would happen, while the controller turn off I did press the guide button again just to see if the controller would turn on um it was out of juice.
So I was charging the battery again, clicked the guide button, saw 3 bars on the screen, I clicked the guide button once again then showed 4 bars then 2 after.. I understand this wasn't a question, but it hasn't been 24 hours.. Mostly everyday I have seen the green circle while it showed up 3 bars. Did anyone had a similar problem like I had? While the battery was fully charge from monday at 3pm, I started to use it around 4pm and kept on playing a game till I stopped at 4 in the morning tuesday. Now it shows 3 bars while a green circle.
From this nyko charger I had to charge the batterie almost every two days. What I don't get or understand, while I had a microsoft battery with kit and charge, I sometimes would charge the battery, meaning I don't have to use a charge for 2 or maybe 3 weeks. I would have 4 bars for 3 days at least then 3 bars for another 3 days but while it was 3 bars, it never once showed the green circle also never once shut off my controller to.
From the microsoft kit and charge, from my playing habit like a day I would have to charge the batterie a day and need to charge it again maybe 2 weeks after.. From the nyko charger, I was charging the batterie every 2 or 1 day because it would go too 1 bar.

Similar Messages

Xbox 360, Question about 7.4

When i upgraded from 7.2 to 7.3, using my ipod nano with my xbox 360 totally got messed up. Playlists no longer worked and the ipod didn't come up as being the right label. I believe it was the same bug for everyone coming up as "Audiobooks". Needless to say, i needed to rollback to 7.2 which i currently still am using. When i did, everything went back to normal.
My question is, has anyone tested 7.4 with the 360?

no 360 users out there?

Elitepad 900 Charging difficulties and a question about the connector

Hi.
I have an ElitePad 900 running Windows 8.1 Pro.
The unit was a demonstrator model but came with warranty etc. I am having a lot of difficulty charging the unit. The power unit end is fine but the piece that goes into the Elitepad is not all that firm - I have to get the thing it the slot "just so" and then put it down very carefully so that it maintains contact. Also, it frequently stays connected, and advises that it is plugged in but says it is not charging. Why would it do that - surely if it knows it's plugged in and the battery needs charging it should just do it, not sit idle.
Any ideas on how to make this work better?
Second, I have a Connector that came with it. It has a piece that goes intot he Elitepad on one end and at the other end it has a slot for a USB cable. I assume this is to transfer stuff from external drives and cameras etc. Will it also transfer files from my Laptop if I buy a USB/USB cable? Seems simple enough to me but I'm wondering why it didn't come with one if it is needed to connect to a laptop.
thanks
Hoges

Okay, I have determined that it is an optical output. What I want to know now is how I can convert that to a stereo output.

Question about the CSS behavior when using layer 3 sticky and sticky table

Hi everyone,
I have a question about the CSS behavior when using layer 3 sticky and sticky table is full.
If I configure layer 3 sticky and specify the inactivity timeout as below, how does the CSS
handle subsequent needed sticky requests ?
advanced-balance sticky-srcip
sticky-inact-timeout 30
CSS document says that
Note:
If you use the sticky-inact-timeout command to specify the inactivity timeout
period on a sticky connection, when the sticky table becomes full and none of
the entries have expired from the sticky table, the CSS rejects subsequent
needed sticky requests.
My question is what is the next reaction by doing the CSS if the CSS is in the
following condition:
when the sticky table becomes full and none of the entries have expired from
the sticky table, the CSS rejects subsequent needed sticky requests
Does CSS just rejects/drops subsequent needed sticky requests ?
or
Does CSS does not stick subsequence requests to particular service but CSS forward
subsequence requests with round-robin basis ? which means if the sticky table is full,
the CSS just works round-robin load balancing fashion for subsequence requests ?
Your information would be appreciated.
Best regards,

Hello,
There is a good document explaining this on Cisco web site
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080094b4b.shtml
It depends if the sticky-inact-timeout is used or not. If not, it's FIFO (the oldest entry in the sticky table is removed). If yes, the CSS will reject the next sticky request.
Rgds,
Gaetan
Rgds
Gaetan

Short question about the nano controls

Hi. I'm probably going to buy a 4Gb nano today, but first I'd like to ask a short question about the << >> buttons on the click wheel.
I read in a forum that the << & >> buttons are actually 'skip' buttons (only used to play the previous or next song respectively), and that it's impossible to rewind or fast-forward within the track you're listening to. This is extremely important for me as I have several 2-3 hours mp3, and I need to be able to access different parts of the file quickly (eg. not having to actually wait 1 hour to listen to my favorite part). I found this to be an important feature, and I can't believe Apple hasn't thought about it.
Anyway, I've never used an iPod, that's why this question may sound plain stupid.
Thanks for you replies!

The iPod fast charges to about 80% and then trickle charges the rest of the way to prevent damaging the battery/iPod. A full charge takes more than an hour or two though the battery indicator will show full. The best way to tell if a full charge has occurred is to unmount the iPod from the computer but keep it connected. The screen will show an animation of a battery. When the animation stops the battery is fully charged.
Also, as your battery discharges the indicator will eventually show red indicating the battery is about to run out...in an hour or two. After you've owned your iPod for a couple months you'll figure out how much time you have left when the indicator turns red - it depends on a number of factors including play volume, equalizer use, etc. In real world use I'm getting over 11 hours.
The headphones are...average. If they didn't hurt my ears I'd find them acceptable for my pop music but not so acceptable for acoustic and symphonic nor music with booming bass - because they don't boom the bass.
I encode the majority of my music at 256 AAC and I've noticed no distortion caused by the EQ. This, plus your complaint about the earphones, leads me to think perhaps you got a bum set of phones. Borrow a pair from someone else and see what happens.

This is a two part question about the creative 16gb Zen?

8This is a two part question about the creative 6gb Zen? First of all, my battery life dropped very suddenly. One charge I was getting the full 30 hour battery life and the next it dropped to under ten. I tried using their tips on how to extend the battery life and I am still getting less than 0 hours of battery life. Why would it dropped more than half the amount between charges? I tried recharging it after it ran out and still the same thing. Any help?
Second, (I am adding this question because it might relate to the first in some way) my mp3 player has been behaving strangely lately. For example, some artists sometimes have letters removed or all but the first end up being removed. But, if you reset the player, the artists go back to the full name. Also, my player has been taking a little longer than usual to turn on. It takes about 30 seconds to turn on instead of the 5-0 that I'm used to. Does anyone know why this might be happening?
My Zen is only 4 months old, and I would be very upset it it's breaking already. Please, if you have any suggestions on how I can fix what's happening, post them. (Even if they?probably won't work, they're worth a try.)

< This is an unusual one; never heard of it before. All I can suggest is cleaning up and perhaps reflashing the firmware. If it still is doing this, then get the thing exchanged pronto.
My guess is that the problems are indeed closely related.

Some questions about the battery

I have a couple of questions about the battery in general.
Is it normal that my iPod Touch 4G charges very fast? It reaches 60% in only one hour and it's fully charged before it takes two hours. I know this is not bad but I'm just worried. How can I be sure if it's really loaded?
Is it normal that the battery is very quick empty when I'm gaming? For now I'm blaming this due to the quick charge.
Is it normal that for example my battery level is at 30% and when I put on standby or something or close a game, the battery starts rising for approx. 5% even 10% sometimes?
Those are my question, I hope they are clear enough. Thanks in advance.
Regards

1. The tech specs says:
Charging times: Fast charge in about 2 hours (80% capacity), full charge in about 4 hours
2. Heavy use like gaming drains the batery fater then other use. The tech specs say:
Video playback time: Up to 7 hours when fully charged
3.. Yes, the indicate capacity tends to rise after heary draining is stopped. The battery indicator is not that accurate is affected by temperature. Heavy use increases battery temperature and when it decreases battery temperature decreases.

I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty?

I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty? I want to know if the 3 year extended warranty covers what damage. Like water damage, accidental damage, lost or stolen macbook, manufactory defects, or any other kind of damage, maybe be even cosmetic damage. Can anyone help me?

If you are talking about features of the MBP itself, as long as you are not looking at the Retina models, then the memory you can upgrade yourself for a lot less than Apple charges, and that does not affect the warranty as Apple considers memory a user permitted upgrade. Great sources are Crucial and OWC, both are Mac specialists and have on-line videos on how to do the install.
If the 15" is what you are looking at, a good upgrade is the 7200 rpm hard drive, gives a little better performance over the standard 5400 rpm drive.
The Hi Res screen is good if you do a lot of graphics work.
Comparing the 13" amd 15" you will notice the 15" has a second, discrete graphic processor...helps when you get into heavy duty videos, games, graphics...but keep in mind that kicking in the second processor uses a lot of power and will run the battery down faster.
If you are looking at the Retina models, then keep in mind there are no post-purchase upgrade options...you have to buy with everything you want at the start.
Just some thoughts.

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

Question about the DB adapter

Question about the DB adapter
ns2006.0.7
Question:
It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database. If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection.
I can't figure out how to add a second DB adapter, does anyone know how?
Thank you
Daniel
Safeway Inc.

Hi
We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
Thanks, Meghan

Accessorie NYKO Charge Base Xbox 360 question about the batteries

Similar Messages

Maybe you are looking for