Accessory not compatible with my iPod
I have been playing my iPod on my new Bose speaker system for months now. All of a sudden, my ipod doesn't play and I get this message: The currently attached accessory is not compatible with this iPod." My friend's iPod plays just fine on this same Bose speaker. I have restored my iPod to its factory settings, but that didn't help.
Deurmekaar:
Welcome to Apple Discussions.
The Camera Connector is NOT compatable with the Nano.
David
Similar Messages
-
i am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?
As I said the iTunes program on the computer. You open iTunes on the computer and go to the View menue in the upper rightand then click on preferences. Go to Devices and delete the backup.
-
what do you do when you can't sync your ipod and it tells you that itunes is not compatible with your ipod?
Upgrade to the newest version of iTunes first to see if that helps.
B-rock -
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
Old Composite Video cable (Tangerine iBook) not compatible with Video iPod
I discovered a little surprise.
Despite being exactly identical on both ends of the cable, an old Apple Composite Video cable, originally purchased for a Tangerine iBook, is not compatible with Video iPod.
Anybody confirms such situation, or is it just my Video iPod with a faulty video output?
Ciao
30G Video iPod Fifth Generation Mac OS X (10.3.9)Gerardo
The cable may look the same but it's wired differently. Please see this for more info :
http://www.tuaw.com/2005/11/01/how-to-convert-an-ibook-av-cable-to-an-ipod-av-ca ble/
regards
Brian -
Every time I sync my iTouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod. Delete the backup for this iPod, then try again." However, when I follow these instructions, delete the backup and try again - I get the same message. Any ideas what is wrong?
Hi,
Try this thread. https://discussions.apple.com/message/12661408?messageID=12661408
Carolyn -
Why are the application in the apple store are not compatible with the iPod touch 4g? Apple please realize there are some of us who still have the iPod touch 4g! I just want to know.
Once I find the game i will truly screenshot that it states "not compatible for these models". I just find it RIDICULOUS that my iPod touch is in good condition and some of the applications that I want download sometimes are not compatible with my iPod touch 4g. I am not going to buy an ipod 5th generation if my 4g is still going strong since the year of 2010.
-
Everytime i connect my ipod touch to my laptop the message that either the backup was corrupt or not compatible with my ipod shows up. It was working before but idk why this is happening now!?
See here: iOS: Troubleshooting backup issues in iTunes
B-rock -
Not compatible with this ipod?
I tried to buy an app on the app store on my iPod touch 3rd generation and it said not compatible with this iPod touch. I know its compatible. I have the latest software, IOS 4.2.1, and the app said I needed a 3rd generation or higher. so I went on iTunes on my computer and downloaded it on to iTunes. then I tried to download it to my iPod from there. I spent 6.99 and it said the same thing, not compatible with this iPod. WHATS HAPPENING!?!?!
Sounds like you may have a 2nd generation unit. Please check the model number on the back. A1288 is a 2nd gen. A1318 is a 3rd gen.
Stedman -
ITunes could not backup the iPod because the backup was corrupt or not compatible with the iPod
iTunes could not backup the iPod because the backup was corrupt or not compatible with the iPod? Please help!
See here: iOS: Troubleshooting backup issues in iTunes
B-rock -
ITunes keeps saying my back is either corrupt or not compatible with my iPod.
After backing up my iPod so I could restore it to fix some glitch issues iTunes tells my my back up is either corrupt or not compatible with the very iPod I had first backed up from. Now, I can't get my notes, photos, etc. Suggestions?
Do you still need help?
-
IPhone not compatible with Blaupunkt iPod interface.
I spoke to Blaupunkt tech support and they said the device was too new for them to have a software update, and nothing was likely to change before February next year.
If you plug the iphone in there's an error message on the iPhone about the accessory not being designed for the iPhone.Welcome to the forums.
Yep, that will be the case with nearly all iPod accessories until they are released specifically for the iPhone. Nothing new here. -
Update not compatible with my ipod?
A few apps I bought are only compatible with the iOS 4.0 or higher. I have an ipod touch 1G and the update isn't compatable with that device. What do I do?
Since there are HW differences there is no much we can do really, other than getting a newer iTouch. Mine is also 1G
-
My computer was having a mickey fit, and freezing. was doing restores etc. and seemed to be ok, but would freeze again after a few mins or just when i thought it was ok. this one time i tried to sync my ipod, and it froze, so i had to restart the computer, now since then the above message comes up when i try and sync
please help. i do NOT want to lose everything on my ipod
thankyou
traceyOn the computer go to iTunes>Preferences>Devices and delete the backup as the message said, The freezing ccorrupted the last backup that iTunes was making.
See the following regarding iTunes freezing:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues -
Why is fast and furious 6 app not compatible with the ipod 4 gen
help
Plain simple. Look at the devices which are not supported: All uses A4 chip and 256MB of memory or less. So it seems that the game is a graphics powerhouse and the lower gen devices can't handles the game properly. That's it.
Maybe you are looking for
-
HT4619 How to test the audio input port
How do you tell if the Audio in port is functioning. I have tried everything and cannot get the computer to accept audio from the external mic. or guitar.
-
General enquiry regarding starting the managed servers in weblogic
Hi, Is there any sequence do we need to follow while bringing up the managed server? like in our set up we do have SOA,OSB & BAM managed servers. So during maintainance activities, we have to start in sequence like SOA(managed server1),OSB(managed se
-
Error in EMS - Test failed - BAM-00553: Resources start operation
All: I am setting up a JMS Module with Foreign Server. I have created 2 Modules....the 2nd one is exactly similar as the first one. I get an error: Test failed - BAM-00553: Resources start operation for destination jms/BAM01Topic failed when I do the
-
Just need to know how to change sort on "Sent" file.
-
I'm trying to do an Analysis of Power Line Hum and then fix. I open STP, a multi track setup appears, I drag my file onto one of the tracks (though it's stereo it only appears on one track--odd), when I click on it it appears in the Film Editor windo