Accidental zoom using Magic Mouse

Sometimes when I'm using the Magic Mouse while in Safari, I unintentionally zoom in on the page. I haven't been able to figure out the gesture I'm doing to cause it. Command- will not zoom the page back out correctly; sometimes going back and then forward again will restore the page to the right size, but this doesn't always work, so then I am forced to close the tab and start over again, losing my progress. Has anyone else had this same issue, or know what gesture causes this? How do I restore the page to the original size without leaving it I need a solution, as I otherwise love this mouse and don't want to turn off gestures. Thanks.
Late 2011 MacBook Pro. OS X Mavericks

I turned off using the Control key in Accessibility to see if that helps accidental zooming. Thanks for the tip. I'll see how well I do with that.

Similar Messages

  • How to pan using magic mouse in Autocad 2012 for Mac?

    Hi. I'm loving Autocad 2012 on my Macbook Pro Retina (although, it is not yet supporting Retina Display). The problem is, I want to be able to pan using magic mouse but, there seems to be no option for this. If I use two finger swipe, it switches between desktops.

    I'm disliking the navigating too, but instead of the spacebar, I have to hold down the Command button at the same time. The problem with that is it takes me out of Model Space and into Paper Space. Two double clicks to get back in and all is well, but it took a while, and when you're concentrating on eg, dimensioning, you don't always notice.
    Re: inactive windows. No zooming, but side to side movement is ok. A fix would be nice.
    My other problem bugged me so much I went out and got a (insert feeling of embarassment here) Logitech wheel mouse, and that was trying to control the zoom rate. When it's set as slow as possible, it's too slow for everything else and when it's in AutoCAD, it's ok but most of the time it takes 3 or 4 swipes on the scroll to get it to move. The wheel mouse was ok, but zoom control doesn't work well, even tho it's an expensive mouse, and exchanging it for a new one brought the same problem. (let go of the wheel and it bounces back a little...or a lot... from the direction in which you zoomed). I think I'll take the magic mouse...

  • Unable to wake screen using magic mouse or trackpad after installing magic mouse

    Dear Everyone,
    I am using mbp 15 inch early 2011 with 2 GHZ intel i7 processor and a  4gb ram. I would like to tell you that i have installed the mac os x lion and quite happy with the improvement. however, there are same changes which i am not sure whether it is that my mac that causeing theproblem or the bug from the lion itself. i am unable to wake my mbp screen using my magic mouse or trackpad after installing lion. i believe that my mbp has not really enter sleep mode as i dont see the sleep indicator at the bottom right corner flickering. i also believe that it is only the screen that goes to sleep while the hard disk is not. Normally a single swing  of the magic mouse or a single swipe of the trackpad will normally wake the screen. in order to wake the screen now is only to click on the magic mouse or trackpad. furthermore, scrolliing page using magic mouse also become unusual after installing the lion. does any of u happen to come across these problems as well? Is there any other way to downgrade to snow leopard back? (i ask this in case that this issue really cannot be fixed). Please help me on this issue. Thank you very much for taking your time to read and reply this thread.
    Moonbasher (henry)

    First, Lion does not wake on mouse or trackpad movement, only clicks or keyboard presses.  This is presumably to avoid waking the computer from display or full sleep accidentally, and is just how Lion works.  It's going to take some getting used to, personally, but I've noticed my mac hasn't woken up on it's own.  Apparently moving about my apartment moves the mouse enough that Snow Leopard used to wake the iMac.  This is not a glitch, and unfortunately, a downgrade is a complicated matter, involving erasing the HD entirely, and restoring from a backup created in Snow Leopard and not used with Lion at all, or manually importing important bits of data, as libraries upgraded by new versions of Mail, iCal, etc will not be compatible with the old versions.
    In terms of your mouse scrolling, describe it in a bit more detail; Lion introduces "natural" scrolling, where instead of the mouse wheel moving the "window" over the contents, it moves the contents through the window, like scrolling on an iPhone or iPad.  In other words, think of your finger on the mouse as pressing on the page you're looking at and dragging it upward through the field of view.  I remember long ago thinking my very first scrolling mouse was backwards, and then adjusting to "down is down, up is up".  If this is the behavior you're experiencing, this also is the way Lion works.  This, however, can be changed in the mouse or trackpad preference pane in system preferences.  Simply deselect "natural" scrolling.
    In a more general sense, its usually not a good idea to do a major software upgrade on your primary machine unless you're willing to deal with some zero-day glitches.  It sounds like the issues you're having aren't actually glitches, and you should be happy for that, but in the future, you might want to wait a few weeks for other users with more experience with major OS launches to find those bugs and point them out to the community for Apple to fix.  In terms of an OS launch, I think this has been absolutely one of the best.  I'm seeing very few major glitches resulting in lost data, few things that would really destroy my personal workflows, and compatiblity issues with other products seems to be well documented or negligible.  It's also a bit hasty to assume that mere hours after launch Apple would have any ability to fix ACTUAL problems with the OS.  My recommendation would be to get used to the change; having to click the mouse at least means you'll never accidentally wake your machine bumping against your desk.

  • Is there a way to open the notification pane using magic mouse?

    Is there a way to open the notification pane using magic mouse? i mean it would be great if i could two finger swipe to the right for the notification pane (two finger swipe left opens dashboard)
    I have Magic Prefs if it helps

    It doesn't seem like this is possible in 10.9.1.  Can someone at Apple confirm or provide a solution?

  • I am not able to scroll using Magic Mouse in MS Word for Mac 2011 (V14.4.5) on a MacAir with Yosemite?  (

    As of this morning I am not able to scroll using Magic Mouse in MS Word for Mac 2011 (V14.4.5) on a MacAir with Yosemite (V10.10). It seems to be isolated to MS Word. Any thoughts?

    Have tried suggestions from here and elsewhere but scrolling not working for me (in Word only!) on magic mouse or trackpad.
    MS Word for Mac 2011 (V14.4.6) with Yosemite (V10.10)

  • How I can highlight, copy and paste using magic mouse?

    I'm wondering how I can use Magic Mouse to highlight, copy and paste documents. I look at directions in manual and preferences, but could not find the answer.

    Just like any mouse. Click down at the start of text you want to highlight, drag to the end of the text. To copy, either use cmd-C, or ctrl-click (hold down the ctrl key and click) or right-click, and click Copy in the popup menu. For paste, cmd-V, or use Paste in the right-click menu.
    Matt

  • Can I use Magic Mouse on a PC with Windows XP?

    I have a PC at work with Windpws XP.  I would like to use Magic Mouse on it.  I s this possible?  How?

    hi verveant, the addon works on pc versions of firefox as well - however the project is no longer developed/maintained so i'm not sure for how long it is is still going to work:
    https://addons.mozilla.org/en-us/firefox/addon/janus-proxy-configurator/

  • Hand writing using Magic mouse

    Can I use magic mouse for hand writing on my iMac as Snow Leapard can use touch pad to do so on my notebook.

    I'm not aware of any software that allows you to do this. Yet.

  • Enabling Safari Pinch and Zoom in Magic Mouse

    I really like the safari pinch and zoom feature with magic trackpad.  It is very useful especially with my 27" iMac.  However, I find this featured disabled with my magic mouse.  Is there any way to enable the pinch and zoom feature in magic mouse?

    Try this from what I have read it is more advanced and polished than BetterTouchTool. Works well for me.
    http://magicprefs.com/

  • How to zoom with magic mouse?

    i can't figure out how to zoom in and out using the magic mouse. i think your're supposed to tape the mouse twice ... sometimes it seems to work; other times not. is there some trick to this?
    thanks

    Try double tapping in between its virtual left and right buttons.

  • HT3917 pan using magic mouse?

    How do you pan using a magic mouse?

    I'm disliking the navigating too, but instead of the spacebar, I have to hold down the Command button at the same time. The problem with that is it takes me out of Model Space and into Paper Space. Two double clicks to get back in and all is well, but it took a while, and when you're concentrating on eg, dimensioning, you don't always notice.
    Re: inactive windows. No zooming, but side to side movement is ok. A fix would be nice.
    My other problem bugged me so much I went out and got a (insert feeling of embarassment here) Logitech wheel mouse, and that was trying to control the zoom rate. When it's set as slow as possible, it's too slow for everything else and when it's in AutoCAD, it's ok but most of the time it takes 3 or 4 swipes on the scroll to get it to move. The wheel mouse was ok, but zoom control doesn't work well, even tho it's an expensive mouse, and exchanging it for a new one brought the same problem. (let go of the wheel and it bounces back a little...or a lot... from the direction in which you zoomed). I think I'll take the magic mouse...

  • Can I use magic mouse with iPad 2?

    Is there a way to use the magic mouse with the iPad 2? Doing so would improve my Citrix experience greatly.
    Thanks

    No, it can take input from the screen or keyboard. 

  • Using Magic Mouse under windows 7 (32/64)

    Hello Apple;
    it is my second issue after i solved the issue of duel OS (OSX & Win7), now every thing went good under win7 except the magic mouse, so when i open the Bluetooth and search the devices the system recognize the Magic mouse, but windows takes so long time connecting to Magic mouse, and finally it is not connected.
    so how to solve this problem?

    bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
    https://discussions.apple.com/thread/4079148
    After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp.
    Hopefully this will help others:
    The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly.
    My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
    Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties".
    Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
    I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one.
    As soon as I enabled the Windows Wireless Service, the problem came back.
    Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem.
    This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer.
    So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
    All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
    Wireless Connection problem using windows in a Mac.

  • Can't swipe between Finder pages using Magic Mouse

    I was able to do this yesterday but must have clicked something accidentally so I can no longer do this. Swipe function has been selected in magic mouse preferences. Please help.

  • Using Magic Mouse to Click on a Photo in iPhoto

    Just installed the Magic Mouse, and I notice that when I double click on a photo in iPhoto to maximize it, sometimes it works, sometimes it doesn't. Sometimes I have to click three times, sometimes two times, or sometimes no matter how many times I click nothing happens. I noticed this too using the Magic Mouse in Best Buy. Has anyone else experienced this? Is there any fix for it? With my bluetooth Mighty Mouse, the double click worked to maximize the photo every time.

    I think I just figured it out. I had to set the double-click to a slower speed.

Maybe you are looking for

  • HT4914 Can I use iTunes Match when I move to Japan?

    I may be moving to Japan and traveleing abroad for 2-3 years. If I sign up for music match, can I still access it internationaly?

  • How to change height of highlight

    I am highlighting some text in a document that I converted from a web page using the converter in Acrobat. The highlighting height is about 2 lines of text high, so as I highlight one line it also highlights half of the line above and half of the lin

  • [Solved] WM similair to Awesome but without need to learn a PL.

    Hello all. I search for a WM similar to Awesome 3.4 but without needing to learn a programming language to configure it. I think Ratpoison is nice  ,but I can all that I can do with awesome-bar with it pop-up bar? Is there something like that. Thanks

  • Making Condition base value ZERO in RF05L-FWBAS

    SD-FI Integration masters - I have a very typical requirement. I need to have ZERO tax in Billing. I have made the Tax Rate & Tax base Amt ZERO in RV60AFZZ. I have even tried giving a Tax code that has tax rate ZERO. Both Invoice & Accounting documen

  • Read Invoice Plan data in BADI impl "ME_PROCESS_PO_CUST" during PO creation

    Hello All, We had implemented BADI "ME_PROCESS_PO_CUST", during the check & post methods I require to fetch the invoicing plan data for calculating the total value of purchase order. Because invoice plan is splitted just like an instalment for a peri