Accidentally deleted all my applications and associated files using App Cleaner and when I put them all back in to Applications none of them work now

Hi last night I stupidly downloaded App Cleaner and deleted all my applications and their associated files. Because I panicked I wasn't able to use the "put back" so I just dragged everything back in to Applications. Now none of the applications will work as some of the associated files aren't in the correct location and some of the files aren't even applications. i did not back up my system with Time Machine (lesson learnt). Please please can someone help me, I know that Mac's don't have a roll back like PC's

Buddhaguru wrote:
I know that Mac's don't have a roll back like PC's
They do. It's called Time Machine.
You need to reinstall all of your Apps. That should replace all of the support files you nuked.

Similar Messages

I have accidentally deleted off my Mac a preferences file for Adobe photoshop and now the program cannot initialize. I have talked to Apple and then say that if Adobe can isolate the file they can help me restore it from my time machine. How do I isolate

I have accidentally deleted off my Mac a preferences file for Adobe photoshop and now the program cannot initialize. I have talked to Apple and then say that if Adobe can isolate the file they can help me restore it from my time machine. How do I isolate the file ?

Do you have the path to this file and name of this file?

After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

HT204266 Cannot access itunes store from itunes - says to check internet connection. I have internet connection. I've unistalled ALL itunes files and associated files, and reinstalled?

Cannot access itunes store from itunes - says to check internet connection. I have internet connection. I've unistalled ALL itunes files and associated files, and reinstalled?

Try this:
1. Settings>General>Date & Time>Turn off set automatically
2. Set date one year ahead
3. Go back to iTunes and try again.
4. You will get the same error.
5. Go back to settings general date and time and turn back on 'set automatically'
Try connecting to iTune Store again.

HT4489 Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

1 - Select the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option. This will take you to the folder containing the original file with that file selected by the Finder.
You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also. Made sure what is found is the large, original version and note were it's located. Search all of your drives with FAF just in case.
If you don't fine the full sized version then the only recourse is to use a file recovery application like SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered. If you find enough files to make the purchase of the software worthwhile buy it and recover the files. However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
2 - book projects are just entries in the library databases and can't be exported to another library.

Cannot read version 4 fcp project and associated files with the new 5.1.2

I cannot read my fcp 4 version projects and associated files with the new 5.1.2 fcp.
Please help!

I bought the Final Cut 5 studio to use for my company but I have project files from version 4, which I would like to update. My G5 is running Tiger and Final Cut recognizes the old files as Final Cut Documents (the media is already on the G5) but will not open them or their associated quicktime files. I have no problem loading version4 to export the Masters but I would like to be able to upgrade the project files so that I can use them in my addition Studio Pro applications and touch them up in Shake. Also, I don't want to go and find FCP4 on the internet because it may have other problems.
What do you suggest?
Can FCP4 files be updated to version 5.1.2?
Can I get a back dated version of FCP4 through Apple?
Thanks for your time.

HT3775 why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

I just updatet my Iphone 4S to IOS6 and the where a error, and now itunes telling me I need to recover my Iphone to use my Iphone and to recover I will lose all my media files and other files! this is an disaster! What can I do? MY IPHONE DON'T EVEN WORK!

I just updatet my Iphone 4S to IOS6 and the where a error, and now itunes telling me I need to recover my Iphone to use my Iphone and to recover I will lose all my media files and other files! this is an disaster! What can I do?
EVEN MY IPHONE DON'T WORK ANYMORE !! NOO!!

I exactly have the problem. Tried to get help from AT&T and Apple. Still no solution...

My husband recently tried to sync my ipod to itunes and in the process he managed to loose all the photos I had stored on the ipod. When I go to my pictures folder on my (Dell) laptop there is now a folder called ipod photo cache. How do I view?

My husband recently tried to sync my ipod to itunes and in the process he managed to loose all the photos I had stored on the ipod. When I go to my pictures folder on my (Dell) laptop there is now a folder called ipod photo cache. How do I view these files? They are now show as ITHMB files!

Those photos taken or bumped photos should bi in the iPod's Camera Roll album
- If they are in an iPod backup then restore from that backup. Note however, that the the backup that had the photos may have been overwritten by a subsequent backup that did hot have the photos on the iPod.See the restore topic of:
iOS: How to back up
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Have you looked on the computer? Maybe they were imported to the computer and then deleted from the iPod. Since the photos were not synced to the iPod they are not in the iPod Photo Cache folder .

Are operating files only within Windows (C:) or are Word and Excel files ok in Documents and (C:) folders in 8.1?

A Microsoft tech said "oh-oh" when he saw Word and Excel files, and I think other files, in Windows (C:). He said only operating files should be in that folder or a user might delete an operating file by mistake. I have Word and Excel files in
both (C:) and Documents folders. There is some overlap but there are different files in each. When I open a Word file it defaults to (C:) not Documents. Sometimes default location is SkyDrive. So unpredictability is my experience. The questions are what is
correct default and how to make it so.
Microsoft store in San Diego transferred files from old computer to new one and this default is how the computer was set up.

Hi, Tyro.
What a mess. Usually system files in the Windows folder are protected from being deleted by users, but not all of them.
Here are some ideas:
Go back to the Microsoft store and tell them to fix it. They caused it, it was their mistake, they are responsible to fix it.
If that is not possible because they are too far away... find another Microsoft Store if possible and have them fix it.
Last resort: If it was me, I'd just back up all the files that I care about onto my SkyDrive (now OneDrive) account or a reliable thumb drive. Then do a factory re-image. Maybe back up the files and make the MS store do it. If I had purchased Office
2013 (it sounds like you have Office 2013), then I would have them reinstall that as well.
Keep the store involved because it is their fault.
At least call the MS store in San Diego and ask them what they suggest. Put them on the spot. They are the ones that screwed up and are responsible for the copying process.
Good luck!
Best wishes, Davin Mickelson

The Error Message 'Application descriptor file cannot be parsed' shows when compiling (Ctrl + Enter) Adobe AIR for Android applications on Flash Professional CS5.5

The Error Message 'Application descriptor file cannot be parsed' shows when compiling (Ctrl + Enter) Adobe AIR for Android applications on Flash Professional CS5.5
This is happening for most of the pupils and staff at our school and they are unable to complete their work.
This also happens on a fresh copy of windows and CS5.5 without any updates and also with all latest updates.
I have tried it on 32-bit and 64-bit CS5, Windows, Air and Java with the same error every time.
There are a small minority of users where this works fine for them with no issue.
I have tried re-setting user profiles.
I have tried a local admin and domain admin account with the same issue
I have noticed however that if the file is moved to the shared area it will compile. If it is on their documents area it will not compile. The users have full control in both locations. This is fine for staff but we are unable to give full control or modify access to the shared area for the pupil's
I have been through the online support section and it directed me to phone Adobe Customer care who informed me that all support has been discontinued for CS5, CS5.5 and CS6 and they will only support creative cloud.
Any ideas what to try next? There is no other information about this error and I cannot work out what is causing it.

I have tried and able to package an apk using your XML file.Could you please make sure your XML file starting from line 1 and coloumn 0.Any space will results in the error (Application Descriptor file cannot be parsed)
-Pranali

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it! Thanks..

Or if you want to grab all the paths programatically, try the attached VI.
Open the top level that you want all the paths from and close all others, then open the
attached and run it. It will return an array of all the VIs that the VI
in question uses, including vi.lib VIs. You can filter these as well if
you like.
Ed
Message Edited by Ed Dickens on 08-01-2005 07:01 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Get all paths.vi ‏29 KB

Printing messages in Log File and Output File using Dbms_output.put_line

Hi,
I have a requirement of printing messages in log file and output file using dbms_output.put_line instead of fnd_file.put_line API.
Please let me know how can I achieve this.
I tried using a function to print messages and calling that function in my main package where ever there is fnd_file.put_line. But this approach is not required by the business.
So let me know how I can achieve this functionality.
Regards
Sandy

What is the requirement that doesn't allow you using fnd_file.put_line?
Please see the following links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Dbms_output.put_line+AND+Log+AND+messages&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=%22dbms_output.put_line+%22+AND+concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Idoc to flat file using Integration process does not show up at all

Hello All,
I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
However when I send the IDOC from SAP then the Integration Process scenario just does not work.
I Checked SXMB_MONI There is no entry for the Integration Process.I can see entry for other without Integration Process.
SXI_CACHE : I can see my Integration Process active
SWEQADM : I have activated the Event Queue and Background job
SWF_XI_ADM_BPE : ALL BPE is showing green status.
All syntax check on IP are fine.
There is no Basis Help for me so there could be some additional basis steps which need to be configured. Has anyone faced such an issue with Integration Process?
Regards
Prashanta

Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
1. let us split the scenario into two.
a. Sender to BPM ( Integration Process).
b. BPM to Receiver.
2. First let us configure the first Sender to BPM.
a. Sender Agreement( Not required ).
b. Receiver Agreement( NOT Required).
c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(Integration Process).
d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
3. Now let us configure the Second BPM to Receiver.
a. Sender Agreement( NOT Required)
b. Receiver Agreement( Sender Service(Integration process), Receiver Abstarct Interface,Receiver service, Inbound Interface).
c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
d. Interface Determination( Inbound Interface, Message Mapping(NOT Required)).
So Finally we have One Receiver Agreement, Two Receiver Determinations, Two Interface Determinations.
Please let me know if you have any more queries.
Regards
Gopi

Creating data and .par files using SWIFT Integration Package

Hi,
I have a requirement to generate a data and .par file using SAP PI Integration package for SWIFT.
I am following the SAP Note: 1303428.
I have created 1 sender and 2 receiver comm channels(one for payload and other for par). Used operation mapping SWIFT_payload_parFile_split in the Interface determination.
I am using the adapter module : localejbs/swift/FileActConversionToSWIFTModule and setting the parameter DetachParameters to true. This adapter module is being used in all the three channels(1 sender and 2 receivers).
I have used ASMA ans has set the FileName checkbox.
Now after placing the file in the input directory, the file with the same name gets created in the output directory but the file is exactly same and also no .par file is getting created. I have set the Empty file handling to Ignore, so it shows that there is no data to create a .par file and only payload file is getting created but the payload file is exactly same.
Also if I use the adapter module : localejbs/swift/FileActConversionToSWIFTModule in only the sender communication channel, a payload file gets created like below.
<?xml version="1.0" encoding="UTF-8"?>
-<ns1:SWIFT_payload xmlns:ns1="http://sap.com/xi/SWIFT"><payload>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</payload></ns1:SWIFT_payload>
But while creating the par file, it shows that the file could not be overwritten and so the .par file is not getting created.
I need to understand that:
1) How do I configure both of my receiver channels i.e. what should be the difference. Currently, I am just setting the
same Output directory in both and file name schema * and has used ASMA with FileName parameter. So same name files are getting created and so one file gets discarded. How to create a .par file.
2) Also Is the file above is the correct file required by SWIFT.
3) Also when I check in SXMB_MONI, I can see that after running the adapter module same payload as given above is going in both payload and par files i.e. also if I am using different names in my receiver communication channels two files are getting created payload and par both are having the same payload. So what exactly should get created.
Kindly guide on this implementation.

Hi,
I am able to generate the .par file by setting the localsecurity to true and the KeyId from the key manager.
Now two files are getting created .xml and .par. .xml file which is the payload file is the same as the input file with no difference and contains both the overrides and the data parameters. The .par file contains the Algorithm and the Value.
Is this correct?
Also suppose the input file name is SEPA.xml, then the payload file is created with the name as
SEPA.xml and the par file is created with the name SEPA.xml.par. I need only SEPA.par. How to achieve this.

Accidentally deleted all my applications and associated files using App Cleaner and when I put them all back in to Applications none of them work now

Similar Messages

Maybe you are looking for