Accidentally imported ALL files to finalized

As I was downloading from my video camera, I accidentally imported everything from EVERYWHERE! How can I get rid of this? There were over 11,000 files...

Deleting the icons from iphoto will not affect the original icons, so no worries there.
If you run Time Machine then restore from it to a point prior to the accident.
Regards
TD

Similar Messages

I accidentally imported all media files on my iMac into iMovie.

I accidentally imported all media files on my iMac into iMovie. Now I have over 10,000 "clips" in a single event library. It is massive and causing performance issues. Some are photos, some are movies, some are music/voice memos and many are stock computer icons/images. If I delete them from iMove (via move to trash) via select all, am I deleting them from iMovie or from my iMac?

No problem! Also, a quick bit of information. If you did not already know this, when you empty the trash, it does not actually delete your files. It just allows the space that those files were taking up to be overwritten. That's why you can go to your Time Machine and recover these files. So, your computer will not improve in the speed department that much after deletion. I'm pretty sure there's a way to completely wipe files off of your computer, therefore actually regenerating space, however I do not know how to get through that process. You may want to ask this in a new separate discussion. Also, please respond to my reply (with a link) right after your add the conversation if you want to create the thread, because I'd like to know too, based on the fact that I cleared 259.82GB off of my computer within the last few months in one sitting.

How to import MXF files to Final Cut Pro with smooth editing

Summary: Follow this tutorial to learn how to import and edit MXF files in Final Cut Pro by converting MTS to FCP native format.
If you have a Panasonic P2, Canon XF or Sony XDCAM series camcorder,
you may be familiar with Material eXchange Format (MXF). Though MXF is a
great video format to record high-definition videos, it is not easy to
use in that they are not natively supported by most NLE systems like
Final Cut Pro. In order to import MXF to FCP for editing, the easy workaround is to transcode MXF files to FCP compatible video formats.
Along with some help from a top MXF Converter, it can be done. To
help those who wanna edit MXF files in FCP without problems, here I
share with you a simple guide on how to convert MXF files to edit in
Final Cut Pro 6/7 or FCP X.
First of all, downloading the App- Brorsoft MXF Converter for Mac
Overall, the program is a professional yet easy-to-use MXF Converter
on Mac (Mavericks included) which can not only convert XF100, Canon
C300, XF105 and XF305, Panasonic P2 recorded MXF files, but also provide
simple video editing functions for you. The MXF to FCP Converter not
only can convert MXF to ProRes for FCP, but also can transcode MXF
videos for editing in Avid MC, Adobe Premiere Pro, iMovie, FCE, etc.
Just download it and follow the tutorial below to get the work done.
Transcoding (P2) MXF files to ProRes for Final Cut Pro 6/7/X
1. Import MXF files to the converter
Launch the best MXF to FCP Converter, and then click the “add files” button to browse and import MXF videos from your camcorder or hard drive.
2. Select FCP editable format
Click the Format bar, and move mouse cursor to choose “Final Cut Pro > Apple ProRes 422 (*.mov)” as output format.
Tips:
a. Settings- click to set video
resolution(1920×1080/1440×1080/1280×720/720×480), bitrate (from 1Mbps to
20Mbps), frame rate (24p/30p)
b. Editor (next to “Add” icon)- click to set deinterlace, trim, crop, add effect, attach subtitles, etc
3. Start transcoding MXF video to FCP
Click “Convert” button to start converting MXF files to Apple ProRes
MOV for FCP 6/7/X under Mac OS. Once the MXF to ProRes 422 conversion
is done, you can transfer MXF footage into Final Cut Pro (X) for editing
smoothly on Mac with ease.
Source:How to import MXF files to Final Cut Pro with smooth editing
[quote] jacknjchn.tumblr.com/post/76914947404/cant-import-mxf-footage-to-fcp-transcoding-mxf-to-fcp [/quote]

You may refer to this step by step guide on how to convert MXF to Final Cut Pro more supported Apple ProRes or DV at http://www.idealshare.net/imovie-fcp/mxf-final-cut-pro.html
It also applies to convert MXF to other video or audio format. It even applies to convert other videos like AVCHD, MOD, TOD, AVI, and MPEG etc to FCP format.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Importing AVI files into Final cut creates a pop

How can I stop getting a popping sound when I import AVI files into Final Cut. I figured it must be the type of file itself but I cant seem to find a free converter to convert my AVIs into what ever is need (which is what? .mov files?)
Please help

The very basics of non-linear editing is to know what video and audio codecs your particular NLE works with natively. FCP works with many video codecs but only a few audio codecs. Typically it works best with AIFF at 48khz, 16 bit.
You can find out all the various native codecs and formats in the User's Manual, Help Files or by looking through the Easy Setup list.
FWIW, both AVI and MOV are not really codecs at all; they are both merely containers that could contain video and audio made from any number of codecs. So saying you have an AVI file or a MOV file is kind of like saying you have a car ... it doesn't really tell anyone much at all.
Both QuickTime Pro and Compressor (which you most likely already have installed) should be able to convert to a native codec for use in FCP.
-DH

How to import MXF file to final cut pro?

how to import MXF file to final cut pro?

Directly or XDCAM transfer depending on camera according to this:
http://en.wikipedia.org/wiki/Material_Exchange_Format
If it doesn't work, I'd ask the question on Final Cut Pro forum, being sure to mention which version of Final Cut Pro you are using.

Importing XML files from Final Cut

Keep trying to import XML file from Final Cut into Adobe Premiere CC, and I get the Error Message:
The project appears to be damaged, it cannot be opened.
Not sure what I'm doing wrong.

I have an FCP generated XML file that I'm trying to open in Premiere CS6.0.2. It fails on import. The sequence of messages is below.
Premiere Pro has encountered an error.
/Volumes/BuildDisk/builds/slightlybuilt/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/ Component/AudioPanProcessor.cpp-214
Next I get a window saying "File Import Failure"
/users/josh/library/caches/temporaryitems/ollombo.pproj
Error message: The project could not be loaded, it may be damaged or contain outdated elements.
When I check the translation results, it says: Generator Item (Outline Text) not translated for clip , Transparent Video used as a placeholder
Help, I need to get this project open!

Can not import MXF files into Final Cut Pro

I am full of anger and frustration!!! I purchased final cut pro only to find out that it WILL NOT import MXF files. How insane is that? ADOBE - NO PROBLEM. Then I had to go back to YOUR STORE and buy two different file converter applications before I found one that worked. Now FINAL CUT PRO will only import the audio segment of converted files after converting to PRORES in PAVTUBE. Are you BUCKING kidding me? This work flow BLOWS. Why the FELL does this have to be sooooo hard! I am gone to creative cow and other forums to try to find out why I am sooo stupid that I can't get this simple process sorted out. YOU BUCKING MONEY MACHINE! How many more aps will I have to buy before I can edit CANON XF100 files in Final Cut Pro. BUCK politics! You should make your software with plugins that would allow you to edit without this kind of added step. JUST LIKE ADOBE. I want refunds for my final cut pro purchase. This is BUCKING rediculous. What a waste of time!

Jeff Eyler wrote:
Good thing I still have an iMac on Snow Leopard with FCP7 where I can import these files. I was hoping to upgrade that system next month when the new iMac comes out
There is definite upside to dragging one's feet on upgrades until necessary and this is a prime example. On a desktop running 10.6, and the XF Utility, FCP 7 L&T works reliably. And like you, that's my workflow for FCPX projects. Running 10,7 on a laptop, the EOS plug-in works well for FCPX imports – no workarounds needed. When I finally get around to updating, I will partition the HD, with one SL partition and the other partition with a later OS. Of course this strategy will work only as long as my hardware holds up.
Russ

Importing video files into final cut express

I am a pro tools engineer and have just dove into final cut express 4.0 to do some simple video editing.I have a cannon camera with a sd card.I archived the video to a hard drive so I could free up the card.I can not find a single piece of evidence that explains how I can import those files from my hard drive.Everything that is mentioned is comming from a camera.I also tried by the book importing a Imovie to start simple.No luck.It shows up in the directory but there is no video.Needless to say I am lost!!!!

If you still have the original video on the memory card, put it back in the camcorder. (Don't try to copy it back from your Mac to the card, however.) Connect the camcorder to your Mac via USB and try capturing the video via FCE's Log & Transfer function.
In most cases when people merely copy video files from a camcorder's memory stick or hard drive (usually AVCHD video) to the Mac desktop or a folder, they don't copy the full directory structure on the card, which is essential. Is that what you did when you 'archived' the video? Can you provide more specific info?

Import all files at once?

Can you import multiple files at once so they encode at once, opposed to individually?
Or, can you import one large timeline (all your files combined on one timeline) and then set up the dvd to access your footage as you want. Opposed to bringing in new files for each part of your dvd (film, extras, trailers, etc)?

Jbowden,
I tried to export my project using MPEG-2 DVD and got the following error message:
After Effects: AEGP Plugin Media IO Plugin: Transcoding cannot progress due to one or more video parameters set incorrectly (error code= 0x203c). Please recheck the settings and try again.
MediaI02: exc00b002
(5027::12)
After Effects: AEGP Plugin Media: IOPlugin: unrecognized Exception.
I'm not sure what this means, or how to fix it. I chose lossless:MPEG-2 DVD, and Best Settings on export. Any clue?
Thx!
Kugar

IMPORTING MEDIA FILES in FINAL CUT EXPRESS PLEASE HELP!!!!

I recently purchased a sony handycam that uses a hard drive instead of DV tapes. I'm trying to use final cut express to edit my footage but when I try to import the files from my camera, the files are unrecognized. I've tried to view them on the quicktime player and that also doesn't recognize them. I believe the files are MPEG2. Im a student and I have to finish this video project by next week and I was hoping to at least have gotten started tonight but have been spending hours just trying to import files. I'm terribly confused!!! If anyone knows what I should do PLEASE HELP. I don't want to have to do my editing on my dell laptop using a windows movie maker.

Those type of files are not directly supported by FCE. You will have to convert them to DV at the Sequence setting you use. eg. PAL 48 kHz.
Software or hardware based solutions are available.
Search this Forum for "Streamclip". This is one software solution.
Al

Sidecar .xmp files ignored when importing all files from a card

Hello,
I've noticed what I think is a bug. This is my workflow:
* I shoot pictures as Raw (in .nef format)
* I run a program on them to add sidecar .xmp files with some GPS metadata
* When I import the .net into lightroom I click on "import" on the left panel.
* The import dialog box shows up, with 2 choices : import all pictures from card / select which images to import
1) If I choose to manually select the files to import, the XMP metadata are successfuly taken into account (I choose to convert the NEF to DNG and the GPS data are well imported)
2) But if I choose "import all pictures from card", the GPS metadata are ignored.
Can you advise, please?
Thanks!

Are the XMP sidecars actually on the card?

ITunes doesn't import all files from xml library

Hi, yesterday I did some changes on mi library. I have 3.000 music files and i didn't want to change the files path manually, so I edited the .xml file, damaget .itl and tried to reimport. It worked, but iTunes didnť import all of my songs, just few of them (about 82) and I don't know how.
The problem is, that I have backup, backup of original iTunes library, but files are not in "old locations", i moved them to new folder and deleted the old - when I tried to fetch missing files in iTunes, it didn't find anything and i had to search it manually.
Can someone help me? Thanks!

Restore your pre-damaged .itl file.
Select an album's worth of tracks.
Run my script FindTracks and point it at the new media folder.
If it works, select the whole library and repair the rest.
If it doesn't work explain further about what you've reorganized.
tt2

Import from SD card on X-fi imports all files, but doesn't let me see them.

The Import feature has been very handy this Christmas. I was able to take my wife's sisters SD card and make a copy onto my Zen X-Fi and later copy the photos onto my computer.
What was odd was that when I was exploring the device, I noticed another folder full of music and videos from when I tried to import them from a SD card.
The Import All option seems to copy everything from the SD card, but will only let you look at the pictures that were imported.
This seems like a really odd behavior to have the import all function just use up the storage space and not let the user play the imported videos or mp3 files.

Download and install VLC. http://www.videolan.org/vlc/index.html and get rid of DivX.

How can I import .mts files into Final Cut Studio from my Sony High Def Camcorder

How can I import .mts files from my Sony High Def camcorder into Final Cut Studio?

Also see: https://discussions.apple.com/community/professional_applications/search.jspa?pe opleEnabled=true&userID=&containerType=&container=&spotlight=true&q=.mts

Accidentally imported ALL files to finalized

Similar Messages

Maybe you are looking for