Accidentally logging out with 5 finger swipe

Hey guys quick question.  Has anyone experienced accidentally logging out or shutting down when using 5 finger to minimize all windows.  I know you can do it with 4 but I typically use 5 since I use 4 for mission control.  It's random but happens almost everyday now.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Retina macbook log out with HDMI Connection

    My macbook pro with retina display has a HDMI port, as most people know, however, every time I connect a display with HDMI, i get logged out, with my session completely lost. Any ideas?
    I'm running OSX 10.8.2

    I'm having the exact same issue with my retina display Macbook as well. Anyone found a solution yet? Very annoying when it kills my whole session!

  • My magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.

    hi,
    my magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.
    Anyone facing the same issue? Thanks.

    Did you check System Preferences - Trackpad ? Also I'm not sure exactly what 3 fingered swipe are you referring to?

  • Having issues with two-finger swipe and hot corners. Help!

    I've lately been having an issue, where my two finger swipe will stop working. I also notice that 3 of my 4 hot corners no longer work, either. The only one that works is the top left. When I restart my computer, or change users, etc, it's fixed for a while, but then the problem will start up again in about an hour.
    I've tried the Software Update, and it seems everything is up to date. Any solutions?? I spent a good deal of money on this iMac, and I'm concerned there's something wrong with it.
    I have a 27" iMac, which I bought around November 2011. Software is OSX 10.7.5
    Thanks!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Flash Log Outs with Snow Leopard

    Getting a ton flash log -outs. MIddle of doing something and computer just logs out.
    Never seen this before in 6 years on Macs. Thought it was spaces, but happens with it disables. Have no idea what it could be.

    Had my first one of these today. Fortunately didn't lose anything despite having many open applications. I was using Word and Excel 2004 and playing music through iTunes Airtunes. Other apps open included: Pages, Mail, Safari, NetNewsWire, Omnifocus, Omnioutliner, Textedit, Preview, Nottingham, Quicktime 7.
    The tipping point seemed to be opening iMovie 09 and trying to adjust the white balance in some HD footage. The preview would reflect the change for a moment then return to the original; I kep trying then iMovie hung. Then Excel declared that autosave had been disable due to some problem. Seconds later the screen went blue and I was returned to the log in screen.
    Perhaps my experience will help someone find out the reason?

  • Firefox with 3-finger swipe

    I love the trackpad, and I love that in Safari I can go back to the previous page by using the 3-finger swipe. Is there an add-on to Firefox to have this feature?

    Check the Firefox add-ons.
    https://addons.mozilla.org/en-US/firefox/browse/type:1/cat:22/sort:popular

  • Launchpad works slow with two finger swipe

    Here is the log file from Etresoft. Could you please tell me what is wrong? This started happening after the Mavericks update.
    Hardware Information:
              MacBook Pro (13-inch, Mid 2012)
              MacBook Pro - model: MacBookPro9,2
              1 2.5 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              HWNetMgr - Path: /Library/StartupItems/HWNetMgr
              HWPortDetect - Path: /Library/StartupItems/HWPortDetect
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:2:22
    Disk Information:
              TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (322.24 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.barebones.authd.plist
              [loaded] com.google.keystone.daemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.oracle.java.JavaUpdateHelper.plist
              [loaded] org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
              [loaded] com.google.keystone.agent.plist
              [failed] com.zteevdo.UDiskService.plist
              [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
              [loaded] com.erikhinterbichler.HeraldLaunchAgent.plist
              [loaded] com.facebook.videochat.[redacted].plist
    User Login Items:
              iTunesHelper
              AdobeResourceSynchronizer
              Skype
              Android File Transfer Agent
              Mail
    3rd Party Preference Panes:
              Flash Player
              TeXDistPrefPane
    Internet Plug-ins:
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              googletalkbrowserplugin.plugin
              JavaAppletPlugin.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   3%          WindowServer
                   2%          mds
                   1%          EtreCheck
                   0%          fontd
                   0%          mds_stores
                   0%          Safari
                   0%          dpd
    Top Processes by Memory:
              90 MB              Skype
              78 MB              Safari
              66 MB              com.apple.WebKit.WebContent
              57 MB              Finder
              49 MB              WindowServer
              49 MB              Mail
              37 MB              mds_stores
              25 MB              com.apple.WebKit.Networking
              20 MB              PluginProcess
              20 MB              SystemUIServer
    Virtual Memory Statistics
              2.03 GB            Free RAM
              1.34 GB            Active RAM
              143 MB             Inactive RAM
              508 MB             Wired RAM
              258 MB             Page-ins
              0 B                Page-outs

    So, I've seemed to solve this problem, in the interm at least.
    1) Open disk utility
    2) Select your HDD
    3) Click "Verify Disk Permissions"
    4) Click "Repair Disk Permissions" (assuming there was an issue)
    5) Once complete, restart your mac
    These steps worked for myself, and I've been messing around with both chrome and safari and the two finger scroll hasn't broken yet.

  • System gets logged out with blank screen suddenly

    I have crossover and installed Google sketchup.
    Whenever I try to export as a 2d picture immediately the system becomes blank and login page appears again
    Can any one help

    The following is My Xorg.0.log.old
    [ 7367.413]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 7367.413]
    X.Org X Server 1.8.1.902 (1.8.2 RC 2)
    Release Date: 2010-06-21
    [ 7367.413] X Protocol Version 11, Revision 0
    [ 7367.413] Build Operating System: Linux 2.6.34-ARCH i686
    [ 7367.413] Current Operating System: Linux gauranga 2.6.35-ARCH #1 SMP PREEMPT Fri Aug 27 16:22:18 UTC 2010 i686
    [ 7367.413] Kernel command line: resume=/dev/sda6 root=/dev/disk/by-uuid/f3a6d5c8-57db-48d7-afff-e6762a184f55 ro init=/sbin/bootchartd acpi_backlight=vendor
    [ 7367.413] Build Date: 21 June 2010 11:54:27AM
    [ 7367.413]
    [ 7367.413] Current version of pixman: 0.18.4
    [ 7367.413] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 7367.413] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 7367.414] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 16 13:20:18 2010
    [ 7367.414] (==) Using config file: "/etc/X11/xorg.conf"
    [ 7367.414] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 7367.414] (==) ServerLayout "X.org Configured"
    [ 7367.414] (**) |-->Screen "Screen0" (0)
    [ 7367.415] (**) | |-->Monitor "Monitor0"
    [ 7367.415] (**) | |-->Device "Card0"
    [ 7367.415] (**) |-->Input Device "Mouse0"
    [ 7367.415] (**) |-->Input Device "Keyboard0"
    [ 7367.415] (==) Automatically adding devices
    [ 7367.415] (==) Automatically enabling devices
    [ 7367.416] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 7367.416] Entry deleted from font path.
    [ 7367.416] (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 7367.416] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 7367.416] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 7367.416] (WW) Disabling Mouse0
    [ 7367.416] (WW) Disabling Keyboard0
    [ 7367.416] (II) Loader magic: 0x81e9d00
    [ 7367.416] (II) Module ABI versions:
    [ 7367.416] X.Org ANSI C Emulation: 0.4
    [ 7367.416] X.Org Video Driver: 7.0
    [ 7367.416] X.Org XInput driver : 9.0
    [ 7367.416] X.Org Server Extension : 3.0
    [ 7367.445] (--) PCI:*(0:0:2:0) 8086:2a42:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000060f0/8
    [ 7367.445] (--) PCI: (0:0:2:1) 8086:2a43:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
    [ 7367.445] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 7367.445] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 7367.445] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 7367.445] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 7367.445] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 7367.445] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 7367.445] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    [ 7367.445] (II) LoadModule: "dri"
    [ 7367.446] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 7367.446] (II) Module dri: vendor="X.Org Foundation"
    [ 7367.447] compiled for 1.8.1.902, module version = 1.0.0
    [ 7367.447] ABI class: X.Org Server Extension, version 3.0
    [ 7367.447] (II) Loading extension XFree86-DRI
    [ 7367.447] (II) LoadModule: "dri2"
    [ 7367.447] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 7367.447] (II) Module dri2: vendor="X.Org Foundation"
    [ 7367.447] compiled for 1.8.1.902, module version = 1.2.0
    [ 7367.447] ABI class: X.Org Server Extension, version 3.0
    [ 7367.447] (II) Loading extension DRI2
    [ 7367.447] (II) LoadModule: "glx"
    [ 7367.448] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 7367.448] (II) Module glx: vendor="X.Org Foundation"
    [ 7367.448] compiled for 1.8.1.902, module version = 1.0.0
    [ 7367.448] ABI class: X.Org Server Extension, version 3.0
    [ 7367.448] (==) AIGLX enabled
    [ 7367.448] (II) Loading extension GLX
    [ 7367.448] (II) LoadModule: "extmod"
    [ 7367.449] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 7367.449] (II) Module extmod: vendor="X.Org Foundation"
    [ 7367.449] compiled for 1.8.1.902, module version = 1.0.0
    [ 7367.449] Module class: X.Org Server Extension
    [ 7367.449] ABI class: X.Org Server Extension, version 3.0
    [ 7367.449] (II) Loading extension MIT-SCREEN-SAVER
    [ 7367.449] (II) Loading extension XFree86-VidModeExtension
    [ 7367.449] (II) Loading extension XFree86-DGA
    [ 7367.449] (II) Loading extension DPMS
    [ 7367.449] (II) Loading extension XVideo
    [ 7367.449] (II) Loading extension XVideo-MotionCompensation
    [ 7367.449] (II) Loading extension X-Resource
    [ 7367.449] (II) LoadModule: "dbe"
    [ 7367.450] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 7367.450] (II) Module dbe: vendor="X.Org Foundation"
    [ 7367.450] compiled for 1.8.1.902, module version = 1.0.0
    [ 7367.450] Module class: X.Org Server Extension
    [ 7367.450] ABI class: X.Org Server Extension, version 3.0
    [ 7367.450] (II) Loading extension DOUBLE-BUFFER
    [ 7367.450] (II) LoadModule: "record"
    [ 7367.451] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 7367.451] (II) Module record: vendor="X.Org Foundation"
    [ 7367.451] compiled for 1.8.1.902, module version = 1.13.0
    [ 7367.451] Module class: X.Org Server Extension
    [ 7367.451] ABI class: X.Org Server Extension, version 3.0
    [ 7367.451] (II) Loading extension RECORD
    [ 7367.451] (II) LoadModule: "intel"
    [ 7367.451] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 7367.452] (II) Module intel: vendor="X.Org Foundation"
    [ 7367.452] compiled for 1.8.1.902, module version = 2.12.0
    [ 7367.452] Module class: X.Org Video Driver
    [ 7367.452] ABI class: X.Org Video Driver, version 7.0
    [ 7367.452] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    [ 7367.452] (++) using VT number 8
    [ 7367.453] (II) Primary Device is: PCI 00@00:02:0
    [ 7367.455] drmOpenDevice: node name is /dev/dri/card0
    [ 7367.456] drmOpenDevice: open result is 9, (OK)
    [ 7367.477] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 7367.477] drmOpenDevice: node name is /dev/dri/card0
    [ 7367.477] drmOpenDevice: open result is 9, (OK)
    [ 7367.477] drmOpenByBusid: drmOpenMinor returns 9
    [ 7367.477] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 7367.477] (II) intel(0): Creating default Display subsection in Screen section
    "Screen0" for depth/fbbpp 24/32
    [ 7367.477] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 7367.477] (==) intel(0): RGB weight 888
    [ 7367.477] (==) intel(0): Default visual is TrueColor
    [ 7367.477] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
    [ 7367.477] (--) intel(0): Chipset: "GM45"
    [ 7367.478] (==) intel(0): video overlay key set to 0x101fe
    [ 7367.502] (II) intel(0): Output VGA1 using monitor section Monitor0
    [ 7367.502] (II) intel(0): Output LVDS1 has no monitor section
    [ 7367.503] (II) intel(0): found backlight control interface /sys/class/backlight/sony
    [ 7367.511] (II) intel(0): Output DP1 has no monitor section
    [ 7367.529] (II) intel(0): EDID for output VGA1
    [ 7367.529] (II) intel(0): EDID for output LVDS1
    [ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 7367.530] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1024x768i" (interlace mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "512x384i" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1600x1200" (hsync out of range)
    [ 7367.531] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 7367.531] (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
    [ 7367.531] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "1792x1344" (hsync out of range)
    [ 7367.532] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
    [ 7367.532] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "1856x1392" (hsync out of range)
    [ 7367.532] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
    [ 7367.532] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
    [ 7367.532] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
    [ 7367.532] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
    [ 7367.532] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
    [ 7367.532] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
    [ 7367.532] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
    [ 7367.532] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
    [ 7367.532] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 7367.532] (II) intel(0): Printing probed modes for output LVDS1
    [ 7367.532] (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1328 1360 1408 800 803 809 816 -hsync -vsync (49.0 kHz)
    [ 7367.532] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
    [ 7367.532] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 7367.532] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 7367.532] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 7367.532] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 7367.532] (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
    [ 7367.532] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 7367.533] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 7367.533] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 7367.533] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 7367.533] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
    [ 7367.533] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 7367.533] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 7367.533] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 7367.533] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
    [ 7367.533] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
    [ 7367.533] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
    [ 7367.538] (II) intel(0): EDID for output DP1
    [ 7367.538] (II) intel(0): Output VGA1 disconnected
    [ 7367.538] (II) intel(0): Output LVDS1 connected
    [ 7367.538] (II) intel(0): Output DP1 disconnected
    [ 7367.538] (II) intel(0): Using exact sizes for initial modes
    [ 7367.538] (II) intel(0): Output LVDS1 using initial mode 1280x800
    [ 7367.538] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 7367.538] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
    [ 7367.538] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
    [ 7367.538] (==) intel(0): DPI set to (96, 96)
    [ 7367.538] (II) Loading sub module "fb"
    [ 7367.538] (II) LoadModule: "fb"
    [ 7367.539] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 7367.539] (II) Module fb: vendor="X.Org Foundation"
    [ 7367.539] compiled for 1.8.1.902, module version = 1.0.0
    [ 7367.539] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 7367.540] (==) Depth 24 pixmap format is 32 bpp
    [ 7367.540] (II) intel(0): [DRI2] Setup complete
    [ 7367.540] (II) intel(0): [DRI2] DRI driver: i965
    [ 7367.540] (**) intel(0): Tiling enabled
    [ 7367.540] (**) intel(0): SwapBuffers wait enabled
    [ 7367.540] (==) intel(0): VideoRam: 262144 KB
    [ 7367.540] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
    [ 7367.565] (II) UXA(0): Driver registered support for the following operations:
    [ 7367.565] (II) solid
    [ 7367.565] (II) copy
    [ 7367.565] (II) composite (RENDER acceleration)
    [ 7367.565] (II) put_image
    [ 7367.565] (II) get_image
    [ 7367.565] (==) intel(0): Backing store disabled
    [ 7367.565] (==) intel(0): Silken mouse enabled
    [ 7367.565] (II) intel(0): Initializing HW Cursor
    [ 7367.602] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 7367.609] (==) intel(0): DPMS enabled
    [ 7367.609] (==) intel(0): Intel XvMC decoder enabled
    [ 7367.609] (II) intel(0): Set up textured video
    [ 7367.609] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 7367.609] (II) intel(0): direct rendering: DRI2 Enabled
    [ 7367.609] (--) RandR disabled
    [ 7367.609] (II) Initializing built-in extension Generic Event Extension
    [ 7367.609] (II) Initializing built-in extension SHAPE
    [ 7367.610] (II) Initializing built-in extension MIT-SHM
    [ 7367.610] (II) Initializing built-in extension XInputExtension
    [ 7367.610] (II) Initializing built-in extension XTEST
    [ 7367.610] (II) Initializing built-in extension BIG-REQUESTS
    [ 7367.610] (II) Initializing built-in extension SYNC
    [ 7367.610] (II) Initializing built-in extension XKEYBOARD
    [ 7367.610] (II) Initializing built-in extension XC-MISC
    [ 7367.610] (II) Initializing built-in extension SECURITY
    [ 7367.610] (II) Initializing built-in extension XINERAMA
    [ 7367.610] (II) Initializing built-in extension XFIXES
    [ 7367.610] (II) Initializing built-in extension RENDER
    [ 7367.610] (II) Initializing built-in extension RANDR
    [ 7367.610] (II) Initializing built-in extension COMPOSITE
    [ 7367.610] (II) Initializing built-in extension DAMAGE
    [ 7367.638] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 7367.638] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 7367.638] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 7367.638] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 7367.638] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 7367.638] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    [ 7367.638] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 7367.640] (II) intel(0): Setting screen physical size to 338 x 211
    [ 7368.101] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 7368.101] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7368.101] (II) LoadModule: "evdev"
    [ 7368.101] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 7368.101] (II) Module evdev: vendor="X.Org Foundation"
    [ 7368.101] compiled for 1.8.1.902, module version = 2.4.0
    [ 7368.101] Module class: X.Org XInput Driver
    [ 7368.101] ABI class: X.Org XInput driver, version 9.0
    [ 7368.102] (**) Power Button: always reports core events
    [ 7368.102] (**) Power Button: Device: "/dev/input/event3"
    [ 7368.110] (II) Power Button: Found keys
    [ 7368.110] (II) Power Button: Configuring as keyboard
    [ 7368.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 7368.110] (**) Option "xkb_rules" "evdev"
    [ 7368.110] (**) Option "xkb_model" "evdev"
    [ 7368.110] (**) Option "xkb_layout" "us"
    [ 7368.188] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 7368.189] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7368.189] (**) Video Bus: always reports core events
    [ 7368.189] (**) Video Bus: Device: "/dev/input/event4"
    [ 7368.200] (II) Video Bus: Found keys
    [ 7368.200] (II) Video Bus: Configuring as keyboard
    [ 7368.200] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 7368.200] (**) Option "xkb_rules" "evdev"
    [ 7368.200] (**) Option "xkb_model" "evdev"
    [ 7368.200] (**) Option "xkb_layout" "us"
    [ 7368.202] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event6)
    [ 7368.203] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
    [ 7368.203] (**) Sony Vaio Keys: always reports core events
    [ 7368.203] (**) Sony Vaio Keys: Device: "/dev/input/event6"
    [ 7368.213] (II) Sony Vaio Keys: Found keys
    [ 7368.213] (II) Sony Vaio Keys: Configuring as keyboard
    [ 7368.213] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    [ 7368.213] (**) Option "xkb_rules" "evdev"
    [ 7368.213] (**) Option "xkb_model" "evdev"
    [ 7368.213] (**) Option "xkb_layout" "us"
    [ 7368.216] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 7368.216] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7368.216] (**) Power Button: always reports core events
    [ 7368.216] (**) Power Button: Device: "/dev/input/event1"
    [ 7368.226] (II) Power Button: Found keys
    [ 7368.226] (II) Power Button: Configuring as keyboard
    [ 7368.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 7368.226] (**) Option "xkb_rules" "evdev"
    [ 7368.226] (**) Option "xkb_model" "evdev"
    [ 7368.226] (**) Option "xkb_layout" "us"
    [ 7368.227] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 7368.227] (II) No input driver/identifier specified (ignoring)
    [ 7368.230] (II) config/udev: Adding input device UVC Camera (05ca:183f) (/dev/input/event9)
    [ 7368.230] (**) UVC Camera (05ca:183f): Applying InputClass "evdev keyboard catchall"
    [ 7368.231] (**) UVC Camera (05ca:183f): always reports core events
    [ 7368.231] (**) UVC Camera (05ca:183f): Device: "/dev/input/event9"
    [ 7368.240] (II) UVC Camera (05ca:183f): Found keys
    [ 7368.240] (II) UVC Camera (05ca:183f): Configuring as keyboard
    [ 7368.240] (II) XINPUT: Adding extended input device "UVC Camera (05ca:183f)" (type: KEYBOARD)
    [ 7368.240] (**) Option "xkb_rules" "evdev"
    [ 7368.240] (**) Option "xkb_model" "evdev"
    [ 7368.240] (**) Option "xkb_layout" "us"
    [ 7368.241] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
    [ 7368.241] (II) No input driver/identifier specified (ignoring)
    [ 7368.246] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event12)
    [ 7368.246] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 7368.246] (**) Logitech USB Optical Mouse: always reports core events
    [ 7368.246] (**) Logitech USB Optical Mouse: Device: "/dev/input/event12"
    [ 7368.260] (II) Logitech USB Optical Mouse: Found 12 mouse buttons
    [ 7368.260] (II) Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 7368.260] (II) Logitech USB Optical Mouse: Found relative axes
    [ 7368.260] (II) Logitech USB Optical Mouse: Found x and y relative axes
    [ 7368.260] (II) Logitech USB Optical Mouse: Configuring as mouse
    [ 7368.260] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 7368.260] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7368.260] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
    [ 7368.260] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 7368.260] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 7368.260] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 7368.260] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 7368.260] (II) Logitech USB Optical Mouse: initialized for relative axes.
    [ 7368.261] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse3)
    [ 7368.261] (II) No input driver/identifier specified (ignoring)
    [ 7368.269] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 7368.269] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7368.269] (**) AT Translated Set 2 keyboard: always reports core events
    [ 7368.269] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 7368.280] (II) AT Translated Set 2 keyboard: Found keys
    [ 7368.280] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 7368.280] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 7368.280] (**) Option "xkb_rules" "evdev"
    [ 7368.280] (**) Option "xkb_model" "evdev"
    [ 7368.280] (**) Option "xkb_layout" "us"
    [ 7368.281] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event8)
    [ 7368.281] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 7368.281] (**) PS/2 Generic Mouse: always reports core events
    [ 7368.281] (**) PS/2 Generic Mouse: Device: "/dev/input/event8"
    [ 7368.293] (II) PS/2 Generic Mouse: Found 3 mouse buttons
    [ 7368.293] (II) PS/2 Generic Mouse: Found relative axes
    [ 7368.293] (II) PS/2 Generic Mouse: Found x and y relative axes
    [ 7368.293] (II) PS/2 Generic Mouse: Configuring as mouse
    [ 7368.293] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 7368.293] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7368.293] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    [ 7368.293] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 7368.293] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 7368.293] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 7368.293] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 7368.293] (II) PS/2 Generic Mouse: initialized for relative axes.
    [ 7368.294] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
    [ 7368.294] (II) No input driver/identifier specified (ignoring)
    [ 7368.295] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
    [ 7368.295] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 7368.295] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 7368.295] (II) LoadModule: "synaptics"
    [ 7368.295] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 7368.295] (II) Module synaptics: vendor="X.Org Foundation"
    [ 7368.295] compiled for 1.8.0.902, module version = 1.2.2
    [ 7368.295] Module class: X.Org XInput Driver
    [ 7368.295] ABI class: X.Org XInput driver, version 9.0
    [ 7368.296] (II) Synaptics touchpad driver version 1.2.2
    [ 7368.296] (**) Option "Device" "/dev/input/event10"
    [ 7368.333] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5728
    [ 7368.333] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4548
    [ 7368.333] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 7368.333] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [ 7368.333] (II) SynPS/2 Synaptics TouchPad: buttons: left right
    [ 7368.333] (**) Option "TapButton1" "1"
    [ 7368.333] (**) Option "TapButton2" "2"
    [ 7368.333] (**) Option "TapButton3" "3"
    [ 7368.359] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 7368.360] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 7368.373] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 7368.373] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 7368.373] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 7368.373] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 7368.373] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 7368.399] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 7368.400] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
    [ 7368.400] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 7368.400] (II) Synaptics touchpad driver version 1.2.2
    [ 7368.999] SynPS/2 Synaptics TouchPad no synaptics event device found
    [ 7368.999] (**) Option "Device" "/dev/input/mouse2"
    [ 7369.013] (**) Option "TapButton1" "1"
    [ 7369.013] (**) Option "TapButton2" "2"
    [ 7369.013] (**) Option "TapButton3" "3"
    [ 7369.033] Query no Synaptics: 6003C8
    [ 7369.033] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
    [ 7369.034] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
    [ 7369.073] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
    [ 7369.073] (II) UnloadModule: "synaptics"
    [ 7369.073] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 7369.073] (II) No input driver/identifier specified (ignoring)
    [ 7369.076] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event7)
    [ 7369.076] (II) No input driver/identifier specified (ignoring)
    [ 7369.076] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
    [ 7369.076] (II) No input driver/identifier specified (ignoring)
    [ 7587.473]
    Backtrace:
    [ 7587.473] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80df05b]
    [ 7587.473] 1: /usr/bin/X (0x8048000+0x63da5) [0x80abda5]
    [ 7587.473] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb779b40c]
    [ 7587.473] 3: /usr/lib/xorg/modules/dri/i965_dri.so (0xb6e67000+0x1384b) [0xb6e7a84b]
    [ 7587.473] 4: /usr/lib/xorg/modules/dri/i965_dri.so (0xb6e67000+0x13e85) [0xb6e7ae85]
    [ 7587.473] 5: /usr/lib/xorg/modules/dri/i965_dri.so (0xb6e67000+0x149e7) [0xb6e7b9e7]
    [ 7587.473] 6: /usr/lib/xorg/modules/dri/i965_dri.so (0xb6e67000+0xa1d6) [0xb6e711d6]
    [ 7587.473] 7: /usr/lib/xorg/modules/extensions/libglx.so (0xb735c000+0x423dc) [0xb739e3dc]
    [ 7587.473] 8: /usr/lib/xorg/modules/extensions/libglx.so (0xb735c000+0x32fa2) [0xb738efa2]
    [ 7587.473] 9: /usr/lib/xorg/modules/extensions/libglx.so (0xb735c000+0x337a5) [0xb738f7a5]
    [ 7587.473] 10: /usr/lib/xorg/modules/extensions/libglx.so (0xb735c000+0x3766f) [0xb739366f]
    [ 7587.473] 11: /usr/bin/X (0x8048000+0x2170f) [0x806970f]
    [ 7587.473] 12: /usr/bin/X (0x8048000+0x1a4b5) [0x80624b5]
    [ 7587.474] 13: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb74c2c76]
    [ 7587.474] 14: /usr/bin/X (0x8048000+0x1a0a1) [0x80620a1]
    [ 7587.474] Segmentation fault at address (nil)
    [ 7587.474]
    Fatal server error:
    [ 7587.474] Caught signal 11 (Segmentation fault). Server aborting
    [ 7587.474]
    [ 7587.474]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 7587.474] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 7587.474]
    [ 7587.483] (II) Power Button: Close
    [ 7587.483] (II) UnloadModule: "evdev"
    [ 7587.496] (II) Video Bus: Close
    [ 7587.497] (II) UnloadModule: "evdev"
    [ 7587.510] (II) Sony Vaio Keys: Close
    [ 7587.510] (II) UnloadModule: "evdev"
    [ 7587.523] (II) Power Button: Close
    [ 7587.523] (II) UnloadModule: "evdev"
    [ 7587.536] (II) UVC Camera (05ca:183f): Close
    [ 7587.536] (II) UnloadModule: "evdev"
    [ 7587.563] (II) Logitech USB Optical Mouse: Close
    [ 7587.564] (II) UnloadModule: "evdev"
    [ 7587.589] (II) AT Translated Set 2 keyboard: Close
    [ 7587.590] (II) UnloadModule: "evdev"
    [ 7587.643] (II) PS/2 Generic Mouse: Close
    [ 7587.644] (II) UnloadModule: "evdev"
    [ 7587.718] (II) UnloadModule: "synaptics"
    [ 7587.719] (II) AIGLX: Suspending AIGLX clients for VT switch

  • Application switching with 4 finger swipe

    Hi there-
    I switched from Windows around two weeks ago and am loving OSX. Apologies if this is a basic question- I searched but found no similar topic:
    When using the 4 finger side swipe to show all open apps, selecting one always switches the menu bar to the appropriate app, but if the app itself is minimized (windows term? hidden?) as opposed to just behind the active window, the app does not come up to the forefront. Is there a setting that will always bring the selected app I am switching to right to the front even if it is hidden? Seems obvious (to me) that if I'm selecting the app I actually want to use it, not just its menus.
    thanks
    Spencer

    Mac is a little different than windows in terms of window management. What I think you're doing is minimizing the windows of applications. You can also hide (most apps do so with command-H) applications. Switching apps (either w/ 4 fingers or with command-tab) will unhide apps, but it won't unminimize windows. You can have many windows minimized, and people don't want to have to reminimize windows every time they switch into an app.

  • How do I disable firefox going forward and back with four finger swipe?

    Whenever I swipe with 4 fingers on my mac, firefox goes forward or back depending on the direction. I want it to stop doing this. How do I make it so?

    You can also try to set the related <b>browser.gesture</b> prefs to an empty string value on the <b>about:config</b> page.
    You can open the <b>about:config</b> page via the location bar and you can accept the warning and click "I'll be careful" to continue
    *http://kb.mozillazine.org/about:config

  • Accidentally logged out of Gnome during VNC session (Solved)

    The title says it all; I'm stuck with SSH, and x11vnc won't start when no one is logged in. I didn't know this. Now I know
    Is there any way to log myself back in so I can start x11vnc again?
    Harry
    EDIT: Stopped GDM manually, created an .xinitrc file with "exec gnome-session" in it, and then ran xinit. Piece of cake
    Last edited by cautha (2008-06-16 06:39:15)

    I know this is marked "solved," but is there any way to give myself the GDM login screen so gnome-settings-daemon functions properly?
    Harry

  • HT6065 Was the finder navigation for back and forwards with 3 finger swipe fixed with this update???

    This has been killing me, 2 months later and im still swiping like it works!!!!

    check in system preferences first to make sure that feature is on (i assume multi touch can be turned on and off i have not gotten to try it yet and am not going be getting a new machine for a while). if it is on you may have to go through and start messing with plists in you library but i have no ideas which ones and its not something you want to randomly go in a screw around with
    -matt

  • I cannot scroll photos with 2 finger swipe

    i cannot perform the 2 finger scroll while viewing pictures using iphoto.

    1. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test.
    2. There are reports that this problem can be solved by simply restarting, or by resetting the PRAM.

  • My mail window only viewable with 3 finger swipe, disappears when I try to click on it to bring it to the front

    I can't get it to come to the front to use it. How do I get it back?

    Known issue, See:
    * https://bugzilla.mozilla.org/show_bug.cgi?id=713014
    this issue maybe fixed in beta/nightly release
    * firefox.com/beta

  • IMessage logs in for split second then logs out with error

    On late 2009 Mac Pro the iMessage says
    "Could not sign into iMessage"
    An error occurred during activation. Try again"
    All other messenger services are working.

    Force reboots can cause directory corruption.
    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
     Cheers! DALE

Maybe you are looking for

  • Please Please help me I need to get this!!

    How can I set a Timestamp to null- I want it to be all zeros- and not a null value to be recorded in the database at the moment I have it just like this Timestamp NewDayTotal = null ; which is just empting the DB of an value - not leaving zeros. Any

  • Replication of a new BP field form CRM to R/3

    Hi Experts, We use CRM 4.0. I have created a new field with EEWB in CRM and I would like to replicate this field to R/3. This is a standard field on R/3 side. Could you please help me what are the steps to do for the replication? We use R/3 adapter a

  • Проблемы энергопотребления во сне Lenovo miix 2 8

    Планшет непригодный к использованию из-за того, что батарея во сне разряжается моментально (около 23%, а то и больше за 8 часов). Вот мой отчет sleepstudy. Не могу понять причину происходящего. Буду рад любым полезным советам.

  • Keeping or changing...that is the question!

    I have a macbookpro 13" early 2011 should i upgrade my Ram and get an SSD or buy the new macbookair???

  • Dashboard Widgets Partially Unresponsive

    Hi guys, My Dashboard widgets are partially unresponsive. For instance: I can enter text in the note widget but not click on the "i" button. ("i" buttons are unresponsive on all widgets) If I were to click on the weather widget it would shrink to a b