Accidentally reformatted boot camp partition

A few days ago I was reformatting an external hard drive using disk utility but I also ended up erasing the boot camp partition. I use parallels to run the bootcamp partition as a virtual machine and as of now all I get from it is the black boot screen and a window saying I'm missing an operating system. I've got some programs that I really need to have back and was wondering if there is any way to do so?
The windows applications can still be found in Finder but they won't open.w

It's gone, the icons in finder are just icons. You will have to reinstall and restore your backup if you have one.

Similar Messages

Accidentally Unmounted Boot Camp Partition

Hi,
I had accidentally unmounted my Boot Camp Partition the other day. When I mounted it back using disk utility, it didn't show up under Startup Disk. The partition still shows up on my Desktop and the windows files are still in tact.
This is what Disk Utility showed:
Name : disk0s3
Type : Volume
Disk Identifier : disk0s3
Mount Point : /Volumes/Untitled
File System : Windows NT File System (NTFS)
Connection Bus : Serial ATA 2
Device Tree : /PCI0@0/SATA@1F,2/PRT2@2/PMP@0/@0:3
Writable : No
Universal Unique Identifier : F7D4C476-E67F-41A4-BD31-900E40EA3D21
Capacity : 201.0 GB (215,795,892,224 Bytes)
Free Space : 175.1 GB (187,998,601,216 Bytes)
Used : 25.9 GB (27,797,286,912 Bytes)
Number of Files : 142,474
Number of Folders : 0
* Owners Enabled : No*
Can Turn Owners Off : No
Can Be Formatted : No
Bootable : No
Supports Journaling : No
Journaled : No
Disk Number : 0
Partition Number : 3
When opening Boot Camp Utility, it gives me the following message:
+Boot Camp Assistant cannot be used: You must update your computer's Boot ROM firmware before using this setup assistant.+
My Boot ROM firmware is up to date, Boot ROM Version: MP41.0081.B07
Also, Mac OS takes more than 10 minutes to load during startup. I have never experienced this problem before. Could this be related to the accidental unmount-ing?
Appreciate some help

It's gone, the icons in finder are just icons. You will have to reinstall and restore your backup if you have one.

Boot Camp partition not showing in startup disk or when holding alt key

I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
Let me know what other info I can give you so that you can please help me!! Thanks in advance!

In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

Can no longer see Boot Camp Partition

Hello all,
I was having problems with booting into Boot Camp/Windows 7 (I was just getting a black screen), so I attempted to delete the boot camp partition and reinstall it. When I did that, the program hung for a while, and finally said there was an error deleting the partition. However, it appears it like halfway deleted it, as it no longer shows up! When I go into disk utility, Macintosh HD shows blue, and then there is a 50 GB partition (the size of my bootcamp) that is white, but it is unlabeled. I cannot adjust the partition to make it the whole HD, and if I go to boot camp assistant, and try to make a new bootcamp partition, it bounces back with an error message as well. I am wondering how I can restore the partition back to the original all mac hd partition..ANy help would be greatly appreciated!!
Kevin

WinClone 3 $20
When you move to a new OS: clone your system, make sure you have backups you can use - for each - the partition table "rules" change with each new OS. And you want to reformat a drive from time to time especially then.
Carbon Copy Cloner 3.4 is a good way to clone your OS X partitions.
Basically, "start over" and restore to one HFS volume with OS X then run Boot Camp Assistant, then restore with Winclone image you made easier.
www.apple.com/support/bootcamp
Find CCC and WinClone www.macupdate.com

Boot Camp Partition & Windows Vista - Disk format Problems

When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
How do I get Boot camp to format the partition correctly?

Read the instructions that come with Leopard Boot Camp. The partition is automatically formatted at FAT32. However, it's a) not bootable (Windows has to do that) and b) Vista requires NTFS. That means once you're in the Vista installer you need to REFORMAT the partition. Select the partition, and then click, umm, disk options I think. Then reformat the drive. If you do that you should be able to continue.
100years wrote:
When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
How do I get Boot camp to format the partition correctly?

OS X Yosemite (10.10.3) Boot Camp Partition Issue

I just updated the system to OS X 10.10.3 with the OS X Yosemite Recovery Update too. My boot camp partition went missing!!! I checked Disk Utility to see what is happening, the reply is "Repair the disk", when i click on Repair, it say the disk cannot not be repaired and needs to be reformat. Any one know what is happening?
P.S. I had post this question a while ago and stupidly click on Solved, so if you saw it please ignore it

Use Windows 7 installation media and repair master boot record !! That's it !!

Recover Deleted Boot Camp Partition

Hello,
A week ago I tried to delete Ubuntu from my Windows 8 Boot Camp partition on my MacBook. However, after the process I couldn't boot Mavericks anymore. When I finally got Mavericks to boot, my Windows partition became unbootable. After running the repair disk, I accidentally ran the "clean" command using Diskpart and COMPLETELY wiped my computer of everything - even my Mac OS X partition. The only way I could get my computer to become usable again was to add a partition using the Internet Recovery Disk Utility tools (there were 0 partitions) and fresh-install Lion.
However, I had all of my important files and apps on my Windows partition and my last backup of it (using Winclone) was outdated. I am not very familiar with this sort of situation, so I was hoping for some help. Currently, I have not attempted to add another Boot Camp partition, but I'm not sure if adding the Lion partition (to make my Mac usable) would make the Windows partition unrecoverable. Also, should I update to Mavericks and then take further action?
I would sincerely appreciate it if I could receive some assistance.
MacBook Pro 13-inch, Late 2011
Processor 2.4 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Software Mac OS X Lion 10.7.5

Sorry for the late reply!
I've found the NTFS partition with the right size capacity, 136 GB. However, when I press "p" to list files, the only directory folders that show up are .Trashes and System Volume Information. The partition also appears to be resized (it may have accidentally happened?) because its size is shown as 146 GB/136 GB.
How would I restore the NTFS partition so that I could fix it with a utility (because I think it's been accidentally resized)? As I'd said above, I deleted my Mac partition too and I had to install a new Lion partition. However, this new Lion partition takes up all of the partition space because there is currently only one, so would I have to re-partition it before I can restore the Windows partition?
Thanks again!

Mac pro boot camp partition cloned to MBP?

i have a 200 GB mac pro boot camp partition with windows 7 on it and between setting it up and getting all my software customized it has been like doing time in a soviet gulag.
if i create a 200 GB partition on my MBP can i clone this from one machine to another?
it would save me a heck of a lot of time and aggravation
TIA
p.s not sure if this makes a difference but my mac pro is a first generation deal that required amy burning a image to disk or something along those lines...

Do you know what I do to get 10.5?
Purchase it if the computer doesn't include it.
Also, I don't understand why the drivers are going to be on older software that doesn't have Boot Camp bundled with it.
The drivers are not on a Mac OS X 10.4 CD or DVD. They are on the Mac OS X 10.5 DVD.
Leopard has Boot Camp bundled with it doesn't it? Isn't part of the deal upgrading and improving the drivers?
Yes.
You say in the above "or use up a Windows installation"
This only applies if the Windows disk or license agreement allows you to create a limited number of installations.
Are you saying here that I could also reformat the drive with XP on it?
You could, but there is little reason to do so.
Do I have to reconfigure my workspaces if I do the second option above?
If you erase the Windows partition, yes.
(30311)

All files on Boot Camp partition mysteriously erased after 10.5.3 update

My wife's MBP 2.4 was running 10.5.2 with a Boot Camp installation of Windows XP. The other night she upgraded to 10.5.3 and everything on her Boot Camp partition was erased somehow.
She spent most of the day working in Windows. During the day someone gave her a usb key with some photos on it that when she plugged it in to her computer something came up in Turkish (she is presently in Turkey) that her friend said she should just close the window and she did. She shut down and switched over to the 10.5.2 install, repaired permissions, and then ran software update to go to 10.5.3. I believe her Boot Camp is updated to the most recent version on the PC side. After the update completed she went to go back into Windows and could not start up in it. It turned out somehow everything on the Boot Camp partition was gone. The partition name was the same as it had been previously and it shouls as all of the space available. None of the material was in the Trash on the Mac side and she had quite a build up in the Trash folder - so it wasn't put in the Trash and then the Trash emptied. It was as if someone had reformatted the partition.
I would chalk this up to user error when she was in disk utility maybe or someone in her studio screwing around with her computer but the same thing apparently happened to one of her classmates shortly before leaving for Turkey. Anyone heard of this happening or have any thoughts?
I had her saving all data to the Mac partition so luckily no data was lost - we just need to reinstall the programs to the Windows partition.
Thanks!

Nope, that didn't happen. The mbp has been loaded directly with Leopard since release day, and had few problems. I've done all the updates from 10.5.0 without any issues. But it was definitely something in the 10.5.3 update that hosed my video (or just a really, really strange coincidence and/or bad timing).
It's not just an OS driver, either. This is lower level than that, because I get NO video from a complete startup. There's no grey screen with the apple logo-- it stays completely blank. This almost surely means that the low-level firmware got corrupted or flashed incorrectly. The fact that the OS detects it as something completely different (Intel GMA X3100) supports this idea.
Thinking back, I did do the update with my laptop screen closed and using a 20" Apple Cinema Display, which is how I use the laptop 90% of the time. And in each of the previous updates, I'm certain they were installed similarly. I mention this, because someone else mentioned having the same issue as me, and noted that the update was done with an external display. Perhaps the firmware update is bugged so that if it doesn't detect the native display, it gets hosed...
I saw some other suggestions in another thread that sounded interesting. For instance, you can create a self booting CD on another Mac that reflashes the EFI (low level bios) to a factory setting. This could potentially fix it, and I would be willing to try it, if I still had my laptop.
In the future, just because things like this make me paranoid, I'll probably reboot the mbp and use only the native display before I do any updates...
Rich

OS X Partition split and duplicated when creating Boot Camp partition

Hi,
I have installed a larger internal HD 3TB into my iMac Late 2009 21.5 inch. All went well until I used Boot Camp to set up a Windows partition. My intention to have an OS X partition of 2.8TB and a Boot Camp partition of 200 GB. I am running the latest version of Yosemite.
Once the Boot Camp partition completed, and Windows 7 installed successfully, I have rebooted in OS X to find that the HD is now showing as a Partition of 200GB for Boot Camp, a partition of 2TB for Macintosh HD (with all my applications and data etc), and a second Macintosh HD partition of 800GB, also containing all my applications and data etc which appears to have been duplicated. Prior to completing the Boot Camp process, the internal HD was showing correctly as a single partition of 3TB.
I have completed this process twice, with the same result. After the first occasion, I reformatted the new internal HD and started completely from blank again (as I was unable to erase or change the duplicated partition in Disk Utility).
I used Migration Assistant to transfer my files, data etc from the old Internal HD which is now an external HD.
Any thoughts on what I am doing incorrectly?

This is expected behavior. On your Mac, the 3TB disk is partitioned to allow Windows to function properly in BIOS mode. BIOS mode (and CSM-BIOS, to be precise) has a limitation of a 2TB disk. on a larger disk (including 3TB Fusion drives), the disk is partitioned in such a manner that the Windows adheres to the 2TB limit.
You can can see the exact partitioning, if you are so inclined, using the following Terminal commands.
diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo fdisk /dev/disk0
The "sudo" commands will prompt for your password, and it will not be echoed back. You may also see a warning about improper use of "sudo" and potential data loss due to "abuse" of the command.

Removing Boot Camp Partition after now using Parallels

Is it possible to completely remove the boot camp partition (under Snow Leopard) without having to reformat the HD and reinstall everything? I don't need it now that I am using Parallels with an XP virtual machine installed on my OSX partition.

utahmac1 wrote:
I ran the assistant and did the restore. Now when my computer turns on I have to hold the option key to get to the mac log in. There isn't the windows boot up option any more. However it wont just boot up to Mac. Any ideas?
Once in OS X go to System Preferences - Startup Volume and set OSX to be the default.
On the next reboot ist should automatically boot into OSX.
Regards
Stefan

How can I get Lion to recognize my boot camp partition.

Yesterday morning I found my mac suffered from a b-tree failure and was unable to access OS X 10.6. I ended up booting into my Boot camp partition of Windows XP and backed it up then reinstalled Snow leopard. Then I upgraded to Lion, saw it fail due to a partitioning issue, created a 2gb partition called Mac HD 2 (by shrinking mac hd), saw i could install but not full install. So I created another partition and installed Lion successfully. Got into Lion and shrunk my 2x 2GB partitions into one 4GB partition. My Windows XP hard drive boot camp partition was still on my desktop. I can access all the files but I can not boot into it. When I hold down the option key there is only Mac HD or Recovery partition.
Is there any way to get the boot camp partition to work?
I did notice that when I was looking through the settings I could choose which HD was the default boot option. Mac hd with 10.7 and a folder called Windows XP were both available.

We also cannot get Robohelp to recognize our FrameMaker installation.
We are using Robohelp 9 and Framemaker 11.
We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so. So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
"This operation cannot be completed without FrameMaker. Install FrameMaker and try again."
I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error. Buying a set of new Robohelp 10 licenses probably isn't an option.
Any other suggestions?
Thanks,
Sue

How do I make a clone of the Boot camp partition?

My MacBook Air (10.6.8) is having problems and I need to send it away for repairs. Before I do that I want to make a clone of everything and put it on my new MacBook Pro (10.7.2)
I am making a clone of the Mac partition using Carbon Copy Cloner. That has worked well as a backup for me.
The only problem is I need to make a clone of the Boot camp partition (Windows partition) and I don't know how.
I want to make an exact clone so it has all the operating system, files and everything.
The other question is when should I make a Bootcamp partition?
Should I migrate the clone to the new mac using Migration Assistant, and then make a boot camp partition? And then what are the exact steps putting the clone onto the boot camp partition?
Thanks for any help.

Here are some previous coments made on this forun regarding backup of a Boot Camp partition. I use Paragon HDMSuite 2011.
Casper 6 does seem to work;
WinClone was handy for XP users but doesn't for instance check for errors during the backup only during restore. Winclone was discontinued at 2.2, all 2.3 versions are hacks (removal of the OS check seems to be the main thing) There has been no deveoplment or support for a while now.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great
and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
Since this is you first time backing up your partition, I would suggest using one of the Backup Wizards. They'll guide you through the backup process and keep you from doing something wrong Similarly, use the Restore Wizard to restore your partition/drive.
HDMS 2011- back up a dual-boot Mac to an external USB drive, do:
1) Boot from the Recovery Disk (I'm assuming that the backup hard drive is attached before you reboot)
2) Select Paragon Hard Disk Manager
3) Launch the Backup Wizard by selecting Wizards > Backup Wizard
4) Select the Mac hard disk (not the partition) where it asks "what to backup"
5) On the Backup Destination page, select "Save data to any local drive or a network share"
6) Hit the radio button for the "Save to local drive option" (unless you got a boatload of DVD's )
7) Select the external USB drive as the backup destination
8) Look over and correct the name and comments
9) Hit Next to start the backup
When it's done, you have an entire copy of your Mac's HD saved to external media.
If you need to recover your HD, just run the Recovery Wizard and reverse the process.

How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion? Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7.
I would like to read and write in both directions from drive to drive if possible. I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares.
I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:". However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access.
Is the Paragon NTFS that comes with Mountain Lion limited in some way?
Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps. I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
Thank you for any guidance you can give me.

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

After Boot Camp partition, iMac no longer boots

Hi, I have a 20" iMac Core Duo (the first Intel Mac off the line) running Snow Leopard 10.6.4. I ran the Boot Camp Assistant to partition my hard drive, and it successfully created the "BOOTCAMP" drive. When it asked for my installation CD, I tried loading a Windows installation partition through a USB hard drive, but the assistant would not recognize it as an install disk. So, I closed out of the assistant early, leaving the Boot Camp partition in place. Eventually, I rebooted my machine in an attempt to boot directly from the USB drive and resume installation.
However, I found the machine will not boot at all. It powers on normally, makes the startup sound, but after a few seconds I'm left with just a flashing folder and question mark icon. Holding down Option-key at startup does nothing. Trying to boot from my Snow Leopard disc by holding down C or D during startup does nothing. Holding down Command-S does nothing. Holding down Shift-key does nothing. Resetting the PRAM does nothing.
What can I do? Is there some way I can access the on-board EFI to make sure the correct startup disk is selected? Why am I unable to boot from my CD drive?
Thanks for your help, everyone.

On OSX go to System Preferences the Startup Volume and reset your Windows 7 partition to be the default.
On the next reboot it should automatically boot into Windows.
A PRAM-reset http://support.apple.com/kb/HT1895 can be the cause of this behavior.
Stefan

Accidentally reformatted boot camp partition

Similar Messages

Maybe you are looking for