Accidentally uninstalled System Control Manager

I accidentally uninstalled my System Control Manager and now the Fn+Function keys are not working, like the track pad disable, ECO setting, all don't work. Would anyone please provide me a link to download SCM for my GS70 with 970m, I have been looking for it for a while and cant find it. Thanks.

Here u go
http://www.msi.com/support/nb/GS70-2QE-Stealth-Pro.html#down-utility&Win8.1 64

Similar Messages

Msi gt683dx vs system control manager WIN8 problem

Hi I have problem whit new version of System control manager (SCM) 10_013_03016 , when I go to control panel option in application it randomly active/deactive Bluetooth, it so annoying so I must to exit application...But can't see now icon when is something activate anymore ! And P1 option not working is this supported in WIN8 ? Help please . Thanks

Hi,
I just bought used MSI GT683DX with Win 7 preinstalled on it. As i own 2x SSD disks and Windows 8 Pro licence from MSDNAA i've installed Windows 8.1 PRO, installed all drivers and utilities from MSI web support page, and i have same problem - when SCM is active, Bluetooth turns on and off automaticly just one by one, like 2 seconds and it is on, another 2 seconds and it is off, without touching it. When i uninstall SCM, WiFi and Bluetooth buttons work property, so it is not hardware-related problem, just software.
I've installed SCM from link you posted today, yesterday ive made BIOS update to .30Z, and did EC reset. Problem is still here. When i put original 500GB hdd with win7 on it installed from sticker on notebook, everything works fine.
Also, P1 button is not working, and i dont have P1 config when i press RMB on SCM...
Any other suggestions, links or what else should i do?

GX660 (i5) System Control Manager on XP 64 Bit

Hi all,
I bought a GX660 last week but I don't want to use it with Windows 7 64 bit so I installed Windows xp 64 Bit.
After having struggled to find any drivers for this operating system (especially graphics drivers) everything works fine except the famous "System Control Manager" which is installed without yet worries.
Thus I can not use the "Turbo" or "Eco" on the multimedia keypad, same for some functions that engages with the combination of "Fn" key (only features WiFi, Bluetooth work).
I like to know if there is a possibility to find a trick, a hack, so that the "System Control Manager" runs completely under this operating system as Windows 7.
Thank you in advance for your help.
Ghunner.

Thank Mark!!!
So I did some tests:
Under XP 32:
P1 Work
TouchPad Enable/Disable Work
Webcam Enable/Disable Work
Mode Sleep Work
LCD Brightness Increase/Decrease Don't Work
Eco Don't Work
Turbo Work
Volume Increase/Decrease Work
Volume Mute Work
Wirless LAN Work
Bluetooth Work
Cooler Boost Work
Under XP 64:
P1 Don't Work (I got the message: "Not compatible with your OS")
TouchPad Enable/Disable Work
Webcam Enable/Disable Work
Mode Sleep Work
LCD Brightness Increase/Decrease Don't Work
Eco Don't Work
Turbo Work
Volume Increase/Decrease Work
Volume Mute Work
Wirless LAN Work
Bluetooth Work
Cooler Boost Work
Now I need to know if the SCM v2.209.1204.006.01 (update 2010-01-26) is the last update for XP version or there is one that is newer?

System Control Manager on Mega 865 Pro

Hi,
I Have a Mega 865 Pro, I would list whats in it but do not consider that any of this would help.
The system has the System Control Manager software installed which allows for you to use the buttons on the front of the system within Windows XP, if the software is not installed or running then one of the problems is when you use the CD eject key the system will restart.
The software runs normally on my account where I'm an admin. However, if I have any other accounts running then the software will not run with the following message.
MGSYSCTRL
Detecting Model type failed!
You may not run this program correctly
Can anyone assist in making sure that I do not give my kids admin access under Windows XP?
Thanks
Rob

Update.
This has now been resolved by performing the following.
1, Download the bios update using the link below, the MSI update utility never reconised that there was a newer version of the bios available.
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=602&kind=4
This fixed the reboot issues when using the eject cdrom button!!
2, The System Control Manager cannot be used under a non admin account, this was corrected by performing the following.
export from mthe registry, and then delete:-
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"MGSysCtrl"="C:\\Program Files\\MSI\\System Control Manager\\MGSysCtrl.exe"
And Change to:-
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"MGSysCtrl"="C:\\Program Files\\MSI\\System Control Manager\\MGSysCtrl.exe"
Then run the new on the Admin account only.
Hope this helps some of you!
Regards
Rob

GX660 System Control Manager problem(Brightness)

Hi again
I have problem with my MSI GX660. I have Windows 8.1. Unfortunately System Control Managaer doesn't work for me.
Turbo, Volume and WIFI works, but I can't change brightness. I try change it in Windows 8 options but still doesn't work for me
Level on bar is change but on screen nothing happens
please help me
I have ATI drivers 14.1
PS. modes like ECO, Office, Movie etc. also doesn't work

The fact that MSI has no posted any drivers for the GX660 for Windows 8 or Windows 8.1, it means that it is not supported for updating to Windows 8 or 8.1. In that case, you're pretty much on your own as far as getting the system to work. We can attempt to give you suggestions, but without MSI providing any drivers, most likely SCM won't work.
The only thing I could suggest trying, might be to grab the SCM from the GX60 (one of the older revisions) for Windows 8 or 8.1 and hope that it works. *NOTE:This is just something I can suggest to try. I by no way take no responsibility for what it might do to your system, nor does MSI*

Windows 8 & System Control Manager (SCM)

For those of you wondering how to enable/disable WiFi, Bluetooth and other devices, SCM will do the trick.
These pictures are based on version 10.012.11014.
Enter the control panel via the system tray. Right click the blue icon (shown top right in the picture) and click Control Panel. Once there just click the device to enable/disable it.
If your SCM does not show the control panel option, you'll need to update SCM. Check the utility segment of your notebook on the website for the latest version.

Try installing Microsoft .NET Framework 4.5 Update for Windows 8: http://www.microsoft.com/en-us/download/details.aspx?id=29185

System Control Manager for GX710 under Vista x64?

OK So i purchased a GX710-250 about 3 months ago and iv been hooked on it . I just ordered the extended battery from etech4sale.com and i loaded up Vista Ultimate X64 on it. Everything working great on it as all the items have 64 bit drivers but i ran into a snag with the SCM software for it. I notice that That the SCM software is only 32X but there is SCM Out there under some other laptop that MSI so i wounder if i can run the software from it on my laptop. I really just need the Volume Control for in game but i would to have my little UGI flash up and show me whats going on. Has any one tried using the SCM from another laptops yet? was it compatible with the laptop? where there any issues? just throwing this out there since i don't think MSI would go back and rebuild the SCM for 64X Vista.
PS
Vista 64 is the future....get use to it. I love it and the Emu system built into it is good enough already.

o well i still got 2 years to get use to this system and all so i don't mine installing it on my pc...anyways when the time comes and sooner or later everyone will have to upgrade in some format... i just hope 7 will go up to 64 bit also. I've been on 64 for about a month now and I've seen no performance decrease but in fact seen performance improvement . My Friends and I see it its time for a generational leap in technology and have a windows system be only 64 bit. But knowing Microsoft they are going to make Vista and Windows 7 the transitional OS like they did back in the early 90 with windows 3.0 and 3.1. So i want to know whats going to be the Windows 95 of the 2000 and force a new 64x standard . I'm sure im going to keep my XP Cd until 2010 when they kill support for XP .

System control manager in GS70 2PC Stealth error

Hello, I bought the laptop several days ago and it works fine. But after updating the version of the software from the official MSI site and updating all the windows updates I have occured an error with the SCM.
I though if I repaired the .net framework it would work but it doesn't even appear in the programs list. I repaired SCM but the same error occures every time I start the program. I really need it to work because it controlls the webcam, bluetooth, and the power. Anybody knows how to fix that?

1. Find .net framework cleanup tool to remove the current .net framework version from your computer. You can download it again from MS website below.
http://www.microsoft.com/en-us/download/details.aspx?id=24872
2. Uninstall SCM and install it again.
http://www.msi.com/support/nb/GS70-2PC-Stealth.html#down-utility&Win8.1 64

Fixing System Control Manager (SCM) Crashing from Unhandled Error in Windows 8

If you get an unhandled error message when rebooting your laptop after installing SCM v10.013.03016 check to see if you have Visual C++ 2012 Redistributable installed on you PC.
If not, download from Microsoft.
I installed version 11.0.51106.1 and SCM seems to be working fine now (apart from my bluetooth which keeps dying every few boots and is probably not related to SCM itself).
This fixed my MSI GT70-0ND Dragon Edition

Try installing Microsoft .NET Framework 4.5 Update for Windows 8: http://www.microsoft.com/en-us/download/details.aspx?id=29185

Problem with System Control Manager on MSI GX660

HI.
I am new
I have problem with my MSI GX660.
Since yesterday SCM didn't work for me.
When windows starts, SCM have appcrash error and FN, and touchpad(eco,turbo,wifi) didn't work.
I installed the newest version of SCm but still didn't work.
I have Windows 7 x64
Sory for my English-I am from Polish

Quote from: Bas on 03-March-11, 02:24:11
Did you install SP1 yesterday?
I don't know did SP1 but I install some new updates yesterday.
This is the problem?

System Control Manager Problem SCM (Only for Windows 8 upgraded from Windows 7.)

when notebook go on sleep mode then after i open it the SCM deson t work else close it and start it again
sorry for my bad english

Try installing Microsoft .NET Framework 4.5 Update for Windows 8: http://www.microsoft.com/en-us/download/details.aspx?id=29185

GX 701 - System control manager

Hi everybody,
I reinstalled new OS on my notebook yesterday and now the SCM utility doesn't´t work properly (wrong shows display status). Brightness, turn on/off - BT, WI-Fi, Webcam doesn´t work, only volume seem to be fine. I tried newest version SCM from MSI download center, other version (on other Notebooks), install new Service pack, or reinstall new OS again. And still working wrong. I´m using Windows XP 32bit. Does anybody ideas hatś wrong?
P.S. please don´t tell me, that CSM utility is unnecessary
Thanks, for your suggestions
Sincerely Mr. Manufacturer

Do you use SCM from MSI web? ==> http://eu.msi.com/index.php?func=downloaddetail&type=utility&maincat_no=135&prod_no=1516

System Control Manager & Vista

Does anyone know if MSI have a version (or are working on one) of SCM that is compatible with Windows Vista

as Vista is still at Beta stage, there probably won't be a version until its release, by which time the 865PRO will have been discontinued and replaced.
you would have to ask MSI about it. if there is enough demand from 865PRO users, then they might make a version available.
How to contact MSI.

MSI GX640 System Control Manager (SCM) for GT640 ?

i download this driver for mi gx640 and the scm eco dont work but I have downloaded the driver for gx640 and it says gt640 see for yourself here http://eu.msi.com/index.php?func=downloaddetail&type=utility&maincat_no=135&prod_no=1998

my eco dont work an i get back to my old driver from cdrom

System Control msg "Get Configuration port has problems

Hello !
1) Do you know what the System control manager is doing and where I can find some information about the program?
2) Do you know what the message " Get confirmation port has problems" means that comes up every time I start the computor since I installed the System control manager ?
Best regards Namretto

Comments: My system/Namretto
>>
Model: AMD Athlon(tm) XP 3200+
Speed: 2.19GHz
Model Number: 3200 (estimated)
Performance Rating: PR3177 (estimated)
Type: Standard
L2 On-board Cache: 512kB ECC Synchronous Write-Back (16-way, 64
byte line size)
Bus(es): ISA AGP PCI USB i2c/SMBus
MP Support: No
MP APIC: No
System BIOS: Phoenix Technologies, LTD 6.00 PG
Mainboard: MICRO-STAR INTERNATIONAL CO., LTD MS-6570
Total Memory: 511MB DDR-SDRAM
Model: Nvidia Corp nForce2 AGP Controller
Front Side Bus Speed: 2x 199MHz (398MHz data rate)
Total Memory: 512MB DDR-SDRAM
Memory Bus Speed: 2x 199MHz (398MHz data rate)
Monitor/Panel: Dell 1501FP (analog)
Adapter: RADEON 9600 SERIES
Adapter: RADEON 9600 SERIES - Secondary
Removable Drive: Diskettenhet
Hard Disk: ST312002 6AS SCSI Disk Device
CD-ROM/DVD: Memorex 40MAXX 1248AJ
CD-ROM/DVD: _NEC DVD_RW ND-2500A
1.44MB 3.5" (A:): N/A
Hard Disk (C:): 29.3GB (19.2GB, 65% Free) (NTFS)
Hard Disk (D:): 82.5GB (71.3GB, 86% Free) (NTFS)
CD-ROM/DVD (E:): N/A
CD-ROM/DVD (F:): N/A
Serial/Parallel Port(s): 2 COM / 1 LPT
USB Controller/Hub: Standard OpenHCD USB Host Controller
USB Controller/Hub: Standard OpenHCD USB Host Controller
USB Controller/Hub: Standard Enhanced PCI to USB Host Controller
USB Controller/Hub: USB-rotnav (hub)
USB Controller/Hub: USB-rotnav (hub)
USB Controller/Hub: USB-rotnav (hub)
Keyboard: Standard 101/102-Key or Microsoft Natural PS/
2 Keyboard
Mouse: HID-compliant Cordless Mouse
Human Interface: Logitech Cordless USB Mouse
Device: NVIDIA(R) nForce(TM) Audio Codec Interface
Model: HP DeskJet 670C
Model: \\HEMPC\SKRIVARE 6
Model: \\HEMPC\SKRIVARE 3
Model: \\HEMPC\SKRIVARE
Model: \\HEMPC\PRINTER
AC Line Status: On-Line
Windows System: Microsoft Windows XP/2002 Home (Win32 x86)
5.01.2600 (Service Pack 1)
Adapter: NVIDIA nForce MCP Networking Controller
Adapter: Realtek RTL8139/810x Family Fast Ethernet NIC

Accidentally uninstalled System Control Manager

Similar Messages

Maybe you are looking for