Accidentily restored ipod from 4.3.3 to 4.3.5 any help

need help want to put it back to 4.3.3 but i dont know how or even if i can

Downgrading the iOS on an iDevice is not supported by Apple. Sorry.

Similar Messages

HT201210 I have an old i phone 3G and do not know the password for it. trying to restore it from itunes but keep getting error code 1015, any help on how to get passed this please?

I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?

Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

TS1463 What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not w

What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not working, please help me...

If you are unable to get the iPod into Disk Mode to try and restore it, it's a very good indication, as mentioned in the article, that the iPod's hard drive is damaged and in need of replacement either by Apple or a third party repair company.
B-rock

HT4623 i cant work out how to transfer my stuff from i-tunes back onto my phone? any help would be much appriciated

i cant work out how to transfer my stuff from i-tunes back onto my phone? any help would be much appriciated

do you mean how to restore a backup
https://discussions.apple.com/thread/3053632
or do you mean how to sync media and apps to itunes
http://www.apple.com/support/iphone/syncing/

Trying to restore ipod from one that died. But restore from backup is greyed out in the itunes menu.

I have latest version of itunes on Mavericks, a brand new ipod nano, and I am trying to restore my old dead ipod from its last backup onto the new ipod. The previous (dead) ipod was inherited from my daughter and is called "Kim's ipod" and I didn't get the option to initialise with the same name when I first connected it to itunes. I suspect that might be the problem.
Restoring from backup is greyed out in the file menu.
This strikes me as a situation that shouldn't be too uncommon - I'm wondering what I am missing.
- How to restore a new ipod from the backup of a new one
- Why is the restore from backup option greyed out
- Or, how to reinitialise the ipod so that the new one can have the same name as the old one in order to back it up.
Or anything else that I might have missed. FYIY the new ipod is NOT in recovery mode.

Hmm. I came to realise iTune Match had downgraded 38 of my tracks, which I'd ripped from my own CDs long ago, with 256kbps versions. I do have backup for the tracks, so I'd like to delete these 38 tracks (I've made a Smart playlist of them), deleting them from iCloud too; then with Match turned off, recover my originals (Add to Library) from an old Mac.
Can't do it! As Richard Tench said at the top, from 27 July 2011, Edit > Delete is permanently grayed out if you have opted for iT Match. And for me on iTunes 10.6.3 (Lion 10.7.4), that's not all: Edit > Cut and Cmd-x both just produce the Bonk sound. My Macbook keyboard has no Del key either.
But all the above are only true with Match active. Store > Turn Off iTunes Match will ungrey Edit > Delete (& fn-bksp etc I imagine). So I would then be able to delete the tracks locally. But of course, if you turn off iT Match you can delete all you like locally, but they will still exist in iCloud, and if I turn on iT Match again, the lower-grade 256kbps ones will come down from the clouds to replace my CD-ripped ones again! Won't they?
Is that right? Is there any way to exclude these 38 tracks (out of ~6500) from iTunes Match so I can keep my better quality CD-ripped ones? (Other than using Alt-Launch & creating a separate iTunes fileset for the 38 tracks - as you might have guessed, some of them fall right in the middle of albums.) Help!
dw32

Restore iPod from Time Machine

I had to restore my 2nd Gen iPod touch and have lost a lot of apps. I tried to update .ipa files individually without success. I'm wondering if there is a way to restore the whole iPod from an earlier version on my Time Machine Backup? I've lost all my favourtie apps and the current ones require a newer OS. Photos and music are easy to restore, it's the apps I'm concerned about. Facebook, Bluefire, LinkedIn. Where are the iPod actual files located? At the same time, I don't want to mess up the apps on my iPad which is running iOS6.
Thanks.

This MAY help:
http://support.apple.com/kb/HT1420
Under how many accounts are the purchased items under?

How to restore ipod from recent backup.

I just wiped out some of my ipod content when syncing and would like to restore my ipod from a previous backup. I am not sure how to do this. I clicked on the restore button and it tells me it is going to reset my ipod to factory settings. How do I tell it to restore to a previous backup?

Where Backups are stored
The folder where your backup data is stored changes depending on the computer's operating system. Since iTunes only keeps one backup per device, you should ensure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
For More info visit:http://www.ipadconverter-mac.com/restore-ipad-from-backup/

I restore my ipod 3rd gen and it take a long time any help?

any helps guys i am new here hope anyone will help me !!1 plsss i really need help

Try place the iPod in Recovery Mode and restore via iTunes.
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

IPod Nano 3rd Gen Issues: would be grateful for any help

Dear all,
I recently purchased an iPod Nano 3rd Gen for my wife. I have been using a mac for 7 years, still have my first iPod 5GB scroll wheel as well as a 60 GB iPod video 5.5 Gen.
Here's what's happening.
iPod Nano connected via dock (which is in a USB hub...could that cause problems?)
Connect, sync, no worries.
Update iPod Nano software to 1.0.2.
iPod then, halfway through syncing, flashes the Apple Logo every 6-7 secs and then does the same again.
It is not recognised in iTunes like that.
Any help?
A hopeful Dan

Hi,
Same thing just happened to me - I have put the Nano 3G into disk mode (hold Menu and Select for 10 seconds then immediately hold Play/Pause and Select).
Just doing a factory restore now, that should bring it back to a brand new state and will try again from there.

I had just updated the facebook app for my ipod touch and now it wont even open, i have tried to restart the ipod and to re download the app several times any help? thanks

i just updated the facebook app for my ipod touch and now it wont open and i tried restarting the ipod and also re downloading the app several times and nothing.. any help? thanks!

jflight007 wrote:
but some of my music was no purchased from itunes so that will all be lost though right?
ALL of your music should be on your computer in itunes. Is it not?
How did it get on your ipod in the first place if not from your comptuer?
Everything on your ipod should be on your computer and you should be syncing regularly.

I group messaged from my ipad and this has screwed up the way my messages are reveived by my friends (it creates new threads in their phones with my email in place of my contact name) I've stopped messaging from my ipad but the problem remains. Any help?

I have an iPhone 4S and use the group texting feature ALL THE TIME. I recently updated my iPad to the latest software and made the colossal mistake of continuing my group messaging from my iPad while connected to wifi. Doing this has successfully screwed but every group text thread I am in, to the point where its very hard for those involved in the thread to keep up. When I initially messaged those I was already engaged in text threads with it created a new thread in their phones replacing my name in their phones with my email. At first this was not a big deal but ever since then the people I am messaging have become increasingly frustrated with how my messages come through. If I am messaged in a group text and respond to it, sometimes when I respond it will create an entirely different thread in my recipients phones. So at that point they have to switch threads in order to read what I wrote. The new thread that my phone creates will send the message under my email not my name (related to the contact they have me saved as in their phones). The worst part about it is that there seems to be no rhyme or reason to why or when my phone will send the message as normal or under my email like it did with my iPad. I haven’t messaged from my iPad since these problems immediately began a month ago but the issues still continue. I have tried everything to get this to stop, I’ve turned off my wifi, I’ve had my friends delete the threads that my messages create in their phones. I’ve had them delete my email in their contact lists and nothing has worked. Can you help me? Any info you could provide would be greatly appreciated.
Note: My phone message no different whatsoever. All the threads have remained the same. The issue is what it is doing to the people that I am messaging.
Best Regards
Rick Mulhern
Message was edited by: Rickapplehelp19

I have this identical problem. For a while my group texts didnt show up on my ipad. Then one day they did, maybe everyone in the group started using the same os version or something. Ever since my first reply to the group there have been complaints of multiple threads. I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time) Everyone in the group has deleted the thread, we've all toggled imessage on/off etc. There still hasn't been a solution.
Any help would be appreciated.
Thanks

I am wanting to exactly match two ID numbers from two differing worksheets within one work book. Once matched I am wanting to retrieve a row value from the second worksheet into the first. Any help much appreciated.

I am wanting to exactly match two ID numbers from two worksheets within the one work book. ID numbers are non linear. Once exactly matched I wish to retrieve a corresponding row value from worksheet two and have it appear in worksheet one against the correct ID number. I have been looking at IF, VLOOKUP, and MATCH functions and suspect that what I want to do requires a combination of two or more. Any help will be greatly appreciated.
regards Vaughanh

Vaughan,
Data A:D is all cells start at column A thru column D.
There is built-in help using the menu item "View > Show Function Browser" in the search field (top right) you can enter vlookup and you will see the detailed description.
From this we see:
VLOOKUP
(search-for, columns-range, return-column, close-match)
search-for: The value to find. search-value can contain any value type.
columns-range: A range of cells. range is a reference to a single range of cells, which may contain values of any type.
return-column: A number that specifies the relative column number of the cell from which to return the value. return-column is a number value. The leftmost column in the range is column 1.
close-match: An optional value that determines whether an exact match is required.
close match (TRUE, 1, or omitted): If there’s no exact match, select the column with the largest top-row value that is less than the search value. Wildcards can’t be used in search-for.
exact match (FALSE or 0): If there’s no exact match, return an error. Wildcards can be used in search-for.
So... the 2,0 means return the value form the same row as the lookup value but from the 2nd column of the range. 3, 0 means from the 3rd column. the ", 0" means exact match

I can't open the RAW files from my new Nikon D610 in PSE10. Any help for this?

I recently purchased a Nikon D610. I have PSE 10. I can't open my RAW files now and I always shoot in RAW. I've tried everything, but still can't open m,y files in the RAW format. Any help??????

Your most direct choices are:
1)      Use the free Adobe DNG Converter 8.3 to create Adobe-DNG raws from your Nikon D610 NEF raws. These DNGs will open in your older Elements Camera Raw plug-in. Be sure to set the ACR compatibly options in the DNGC to support whatever version of ACR you’re using.
2)      Buy PSE12, and first download the trial version to make sure your computer can run it properly.
Adobe only adds new camera support to whatever the current versions of their software, and PSE12 was the current version of Elements when the D610 support was added.   PSE10 won’t be updated.
Also be sure that you are NOT using the old Nikon Transfer or ViewNX with your new Nikon camera. These older versions of Nikon products change something in the metadata of new camera NEFs that makes them unrecognizable to Adobe software.

Hello, i dowload the new itunes 10.5 and now when i plug my new ipod 4 say the movil divice is not starterd , any help please

hello, dont let me dowload the new ios5, or i dont now how. please i really need help, when i dowload the new itunes 10.5 whe i plug in my ipod4 get me a warning saying " this ipod cannot be used because the apple movile device service in not starterd" . what means this?
any help

renatofrombronx wrote:
hello, dont let me dowload the new ios5, or i dont now how. please i really need help, when i dowload the new itunes 10.5 whe i plug in my ipod4 get me a warning saying " this ipod cannot be used because the apple movile device service in not starterd" . what means this?
any help
Try to reinstall Itunes, maybe is internal problem.

Why is a photo displayed sideways when emailed. When I take a picture and email it is received sideways and not like it appeared when sent. I have not had this problem when sending pictures from my IPad or Mac. Thanks for any help M

It seems when the photo is sent to someone it is received in a sideways position. I have resent after editing and rotating the picture but is still is not upright.
Any help would be great.
Thanks. M

In my case I take HD video with an Apple iPhone 4S and an iPad 2. These cameras can be just as easily oriented in any of four orientations by hand, or in various iPhone or iPad holders for mounting on a tripod. As long as I stay with Apple or Adobe products for my whole video handling process, I have no problem with software support for orientation
While there are countless software programs available today that display JPEG images, only a subset of them actually interpret the EXIF Orientation flag. Just like color management, many programs simply display the JPEG image as it is stored, and completely ignore any extra details stored in the file's metadata. The most important of these additional details is the Orientation flag, stored in the JPEG APP1 marker under EXIF IFD0.
More explanation of this is in the text below.
Briefly, Apple is doing it right, with their iPhone 4S and iPad 2, the way most High end video cameras do it. And they made sure that their apps looked at the appropriate flag to rotate the image before showing it. To understand this look at this site:
http://www.impulsead...rientation.html
This is a site that explains the whole deal. Apple and Adobe are looking at the flags for image rotation. Plex,and many others are not doing so. VLC for instance, DropBox is anpther example, Thunderbird is another example, the list is long.
Many newer digital cameras (both dSLR and Point & Shoot digicams) have a built-in orientation sensor. Virtually all Canon andNikon digital cameras have an orientation sensor. The output of this sensor is used to set the EXIF orientation flag in the image file's metatdata to reflect the positioning of the camera with respect to the ground. Canon calls their sensor the "Intelligent Orientation" sensor. It is presumably a 2-axis tilt sensor, allowing 4 possible orientations to be detected. The paragraphs below are taken from that wonderfully illustrated link.
Auto-rotation in Digital Cameras
While your digital camera may include an option to "auto-rotate images" due to the camera's orientation, this is almost always just a "virtual rotation". A flag is set to indicate to the viewing software / LCD preview which way to rotate the image before display, rather than rotating the image content itself.
As lossless image rotation is a fairly compute-intensive operation, digital cameras are not likely to include true lossless rotation after capturing the photo. The CCD/CMOS sensor hardware is designed to stream raw data in a particular direction (e.g. rows then columns), and so it may be hard to incorporate true auto-rotation in-camera without a performance impact to continuous shooting (frames per second).

Accidentily restored ipod from 4.3.3 to 4.3.5 any help

Similar Messages

Maybe you are looking for